Replacing the wiper blades on a G30/31 BMW 5 Series

In todays video, I show you how to replace the wiper blades on a G30/31 BMW 5 series.
To get the wipers into the 'Service' position, get into the car with the key. Press the 'Start' button but do not start the car. Press and hold the wiper stalk down on 'demist' for approximately four strokes. Release when the blades reach the top of their stroke.
It is now safe to replace the blades.
The front blades are held in place with a clip. Press this down and pull to release. To refit, you need to guide the new blade into place and press until you hear the blade click into place.
The rear, the arm is stiff but will pull up and allow you to pull off the old blade. Replacement is a case of just clipping the new one in place.
To reset the front wipers, get into the car, press the Start button but do not start the car. Press and hold the wiper stalk for around ten seconds, the wipers will now park. You can then leave and lock the car if required.

[@sjr9062]

Hi. Sorry to write a negative comment but the very thing I needed to see was not in your video because it was outside the camera shot! Next time please get someone to hold the camera so the video is actually of some use. Thank you :)

[@JCTsFascinatingHobbies]

What did you need to see? Not exactly hard for me to re film and re upload .

[@JCTsFascinatingHobbies]

Any pointers as to what element you would like to see? Really no trouble at all to film the process in more detail.