I bought this meter last fall when I gathered up all of my solar components,I’m still doing install and have t used the meter yet but plan to,thanks for the video.
I need to invest in a clamp-on meter. I have always used Flukes, but that Kline is super nice, especially for the price. I really like the built in light.
I like it I didn't see a meter that would measure dc amperage. I found a Ideal meter that would measure dc amperage. If I would of seen this one I would have bought it. Thanks for putting up this video.
Glad you enjoyed the video! As a lifelong Fluke/Fieldpiece user the Klein has really been impressive especially considering it’s budget price. I had considered Ideal but the previous experiences with Klein steered me to buy the CL800. I’ll be using it daily, good test to see if it holds up for years like my other meters.
@THEOFFGRIDMOUNTAINHOMESTEAD a lot of their meters are made by UEI I am not for certain on that particular model. Still a good meter and I know what you mean about Fluke and Fieldpiece meters. I have used a lot of different brands over the years but I still go back to what I am use to. Have a great evening!
Thanks for the review. Just curious from a solar testing perspective, why would I get a CL800 vs a CL390? I'm primarily interested in testing used panels to make sure that they are a good buy.
CL 390 is good for basic use. Probably be just fine for any DIY work or testing used panels. Missing some features that the CL800 has for a relatively small price difference. CL800 has Low impedance testing, higher amperage readings (which can come in handy testing inrush currents on 12v systems, large motors etc) backlit display, 1000v rating plus other stuff I’m forgetting lol! Can’t really go wrong with either, pick whichever has better features for you!
@@THEOFFGRIDMOUNTAINHOMESTEAD Thanks for the reply. I was only aware of the 600 vs 400 amp difference. Wasn't sure if that was significant or meaningful for my purposes of just needing to test solar panels and other miscellaneous "around the house" electrical uses. I think the price differential between the 2 models is about $50.
FYI. LowZ is only applicable for AC voltage. So you probably won’t need it for solar. Probably won’t come into play in most household applications either.
We’re considering a solar setup for off grid. There’s SO MANY choices and the setup is overwhelming. I know nothing about electricity. Where do I begin? Which is the best value and most reliable? How much do I need to operate freezer, 2 fridges, furnace, lamps, AC, etc?
I’m getting lots of requests for basic solar information and how to/DIY requests. I’m trying to include more solar content on the channel. Especially focusing on the basics. Hopefully there will be some upcoming content that can help you! Thanks for watching and commenting!
I love my fluke t6-1000 but I frequently use my CL800 over it. I also have a Fluke 117 but I use a Klein mm720 in its place… can’t beat Klein meters for price and quality.
Depends on the individual’s previous electrical experience and what they are wanting to measure/check. One would assume the majority of DIY small scale installs will most likely not need inrush current measurement capability. But if it’s in the individual’s budget for an inrush capable meter, by all means get one with the feature. Never hurts to have additional options.
If you’re installing more than one panel or panels that are not from the manufacturer of your machine. You always want to check your open circuit voltage before connecting to your machine. If you’re using a panel combination approved directly by the manufacturer of your machine, you should be G2G.
Man just bought this meter and this video has been helpful explaining its capabilities. Great man and thank you for taking the time to explain dc
Glad the video was helpful! Hope you enjoy the new electrical meter! Stay safe!
I bought this meter last fall when I gathered up all of my solar components,I’m still doing install and have t used the meter yet but plan to,thanks for the video.
Great to hear!
I need to invest in a clamp-on meter. I have always used Flukes, but that Kline is super nice, especially for the price. I really like the built in light.
This is the first meter I’ve owned that isn’t a Fluke or Fieldpiece. So far I’m loving it. Thanks for watching and commenting!
I like it I didn't see a meter that would measure dc amperage. I found a Ideal meter that would measure dc amperage. If I would of seen this one I would have bought it. Thanks for putting up this video.
Glad you enjoyed the video!
As a lifelong Fluke/Fieldpiece user the Klein has really been impressive especially considering it’s budget price. I had considered Ideal but the previous experiences with Klein steered me to buy the CL800.
I’ll be using it daily, good test to see if it holds up for years like my other meters.
@THEOFFGRIDMOUNTAINHOMESTEAD a lot of their meters are made by UEI I am not for certain on that particular model. Still a good meter and I know what you mean about Fluke and Fieldpiece meters. I have used a lot of different brands over the years but I still go back to what I am use to. Have a great evening!
Thanks for your always easy to understand videos!
Glad you like them!
Kline tools were always the tools we used at the telephone company. Good tools!
Have always used Klein hand tools. This meter is impressive too!
i defiantly need to pick up one of those. Great info looking forward to more on this meter
It’s working great! I’m enjoying the meter!
Very good information, is there a book to go along with the meter? Thank you much.
The meter has a user manual, gives all the specs, warranty, ratings etc!
Thanks for watching and commenting!
👍👍👍👍
Hi mate still good after one year ?
Yes 100%
Thanks for the review. Just curious from a solar testing perspective, why would I get a CL800 vs a CL390? I'm primarily interested in testing used panels to make sure that they are a good buy.
CL 390 is good for basic use. Probably be just fine for any DIY work or testing used panels.
Missing some features that the CL800 has for a relatively small price difference. CL800 has Low impedance testing, higher amperage readings (which can come in handy testing inrush currents on 12v systems, large motors etc) backlit display, 1000v rating plus other stuff I’m forgetting lol!
Can’t really go wrong with either, pick whichever has better features for you!
@@THEOFFGRIDMOUNTAINHOMESTEAD Thanks for the reply. I was only aware of the 600 vs 400 amp difference. Wasn't sure if that was significant or meaningful for my purposes of just needing to test solar panels and other miscellaneous "around the house" electrical uses. I think the price differential between the 2 models is about $50.
FYI. LowZ is only applicable for AC voltage. So you probably won’t need it for solar. Probably won’t come into play in most household applications either.
We’re considering a solar setup for off grid. There’s SO MANY choices and the setup is overwhelming. I know nothing about electricity. Where do I begin? Which is the best value and most reliable? How much do I need to operate freezer, 2 fridges, furnace, lamps, AC, etc?
I’m getting lots of requests for basic solar information and how to/DIY requests. I’m trying to include more solar content on the channel. Especially focusing on the basics. Hopefully there will be some upcoming content that can help you!
Thanks for watching and commenting!
I accidentally ordered the cl900 thinking it would be better.
Anyway, is there only a storage spot for one probe on the side?
I just wrap the leads through the Amp Clamp. Or if storage in the bag, I remove leads completely from the meter and fold up.
I love my fluke t6-1000 but I frequently use my CL800 over it. I also have a Fluke 117 but I use a Klein mm720 in its place… can’t beat Klein meters for price and quality.
Do you think DIY solar people need inrush capable meter?
Depends on the individual’s previous electrical experience and what they are wanting to measure/check.
One would assume the majority of DIY small scale installs will most likely not need inrush current measurement capability.
But if it’s in the individual’s budget for an inrush capable meter, by all means get one with the feature. Never hurts to have additional options.
Without inrush will a meter pick up the watts spike when a compressor kicks on
Is this needed for generator solar panels? Seems over kill for those…. Thx
If you’re installing more than one panel or panels that are not from the manufacturer of your machine. You always want to check your open circuit voltage before connecting to your machine. If you’re using a panel combination approved directly by the manufacturer of your machine, you should be G2G.
Nice video for those who are experienced, but to those who are not, he could have slowed down a bit
Thanks for the feedback, appreciate you watching and commenting!