Has the engine blown on my new project?
Вставка
- Опубліковано 4 лип 2024
- Today we start a new van project which should be straightforward, but if you are an OG of the channel, nothing is ever straightforward.
Amazon Store: amzn.to/2Xfh2AN
Our Merch Store: teespring.com/en-GB/stores/ca...
Support the channel by becoming a Patreon and gain a whole load of benefits.
/ carsforpaul - Авто та транспорт
Being a fossil, I'm 80, I am going to find this van an interesting repair. It certainly appears that this vehicle was driven until it couldn't go any further and it will be interesting to see what caused it to quit. Great video as always Thank you.
You have to remove one T30 to change the oil filter, there not to bad to do.
Needs a cyl 4 glow plug, not a control unit.
The high pressure fuel pump sends the fuel to the the rail, the pressure regulator in the rail maintains the pressue, and opens and cloese to raise and lower the pressure. Theres also a regulating valve in the Hp fuel pump.
Owned a few Caddy’s great van’s injectors have been a common problem for me .
O rings in the oil cooler run some degreaser thru the water system after changing the o rings
Looking forward to seeing your progress on this one 👍
Great new project I loved your son other van
You did so looking forward to seeing you work on this one 👍
Great to see a engine again ,a interesting project, your very good to your son😊
thankyou Paul,looking forward to this one,,keep well..👌👍
I think it’s a nice project for the channel but I don’t think it’s a bargain
I hope your right on this engine…
Will make a good van for him for sure
my moneys on the dpf
Looking forward to watching the rebuild Paul , kracking little van for 15 hundred squids,wonder what all that cctv stuff was all about.
Good engines just the ancillaries are poor. Id be looking at the fuel filter for swarf before buying any other parts but would imagine the high pressure fuel pump has worn/failed and the swarf will of found its way into the injectors hence the injector 1 fault code. Low pressure code as its not creating pressure not because the sensor has failed
You have a new subscriber
Hey Paul, really good to see another video from you. Can’t wait for the next episode, and amateur grease monkey like me is always keen to learn new things and in one short video I’ve learned so much, so thank you sir and muchos kudos to you.
You are welcome
Brilliant video. Any chance of your thoughts on used car prices think your insight on video will be brilliant. They seem to be dropping.
Thank god the electric cars are now done with and I can come back to watching the channel 👍
Welcome back!
Glad to see you are back to an ICE project. Do you plan to install a tow bar? Didn't notice one. If so, it would be good to understand the electrics being wired for towing. Thanks!
Enjoyed the challenges of the ID3 which basically said keep away from EVs at the current price point... Now it's back to learning more about proper cars and vans as in this case
Why didn't you remove the black trims in the back before painting?
is that a lithium battery and charge system inside car if it works it half the value of car
ever thought about doing a uk road trip video,maybe with your son,i reckon you could nail it fella,
Good idea
Hi what obd reader do you have and use
for VW's I use obdeleven and vcds
Do u really need to change that door,RECYCLE !!!!! £1500 Is a good price.good luck
Back to proper engines Paul lo
High pressure fuel pump
oil cooler?
I was like first minute in. 😂
Oil collier gone
5 pot next Paul?
Thats the plan
finallyyyy a non EV thank god!!
First
Enjoyed the ID.3 but I have no interest in fossils.
Sorry and bye.
Bye.