Thanks for the videos. I was always interested in building crafts/trades. But now I need to learn how to lay bricks, because of a mailbox I hit. Hopefully now I can do a proper job. Thanks for sharing your insight and experience. I appreciate it.
The old bucket handles were half round galvanised steel. They were like rocking horse shit in the day. I have always used a bent piece of pipe. Great video.
I have just found you channel great stuff buddy but I prefer using a bit of hose pipe for them type of brick as jointing iron has no flex in it to follow contours of them brick but we all have our own ways and brickwork is a trade where there can be many options for finishing whether it's mortar colour or joint finish or type of brick so its a permanent learning curve for all bricklayers no matter what age as there's always something to learn or a different way to try. Keep up the good work 👍
Glad o hear you're enjoying the videos. I do like using those pipe for rougher bricks like these but I didn't have any when I started rubbing it up, just continued using the jointer throughout the build
Really useful to see the process at length for someone like me who has never done it. Have you ever built a pizza oven?! I’m about to start my project with a pre-cast dome but the rest built completely from scratch. Would be great to see you tackle something similar
Hi loving your channel. For brick columns that have bricks fall apart and in need of pointing is it necessary to rebuild from scratch? The columns are supports for the porch and extends up to support the front of the roof. Or maybe you have videos on repairing brick columns that have almost collapsed lol?
It’s called a running iron bucket handle is half round that protrudes out also when it’s too wet it’s called squelching and best brush I use is a horse hair brush I think bon co make them foot long brush red hot to use
Now I've heard it said that when pointing you should have a brush in that left hand, and that fact that you don't means you didn't have enough butter? Thoughts?
try taking longer strokes when doing the horizontal joints. Use the heel for the verticals, interior angles of masonry walls are never struck concave they are finished flush.
Kraft tools in USA makes a curved jointer which works great on common brick or rougher brick it keeps you from getting mouse ears on the vertical joints.
The maximum I think anyone should have to point verts or beds is 10% of the brick. It's better looking when you're working and less work later which is more laid which is more money. They say in specs in the USA thumb print hard to strike or tool joints.
Love your videos. I'm a mason from Amarillo Tx. Don't believe that thumbprint bull jive. I giggle every time I here that shit. This just me jointing or cleaning up my work just depends on the weather and the material. Some brick dry faster than others and some brick dont absorb moisture well as others. Do you only work on residential jobs. Do you do any commercial work also.
If you place the cross joint on better you would have little to point up in voids. It's taking you a long time to fill all the vert's and no time if you made the cross joint near in plane with the face of the brick when applying the mortar. Also when you get mortar on a trowel and you want it to stick tap the bottom of the trowel with the jointer.
Buttering the perp at 45 % angle can leave too many gaps to fill when jointing , flatten it before laying . Was taught not to use the heel as there's a chance of digging in , but it's all in the timing of when you joint up . Nice job it looks well .Bucket handle was invented when some guy got sick of trying to point the giant circular towers that sprung up during the industrial revolution and used his bucket handle .
Piece of lorry fan belt?! Can day that's the first time I've heard if that. Sounds like it could be a nice finish 🤔 maybe I'll do that on the garden walls around the house. Cheers buddy 👍🏻😁
Lorry fan belt works a treat....these bricks don't suit jointing iron...there way to rustic i would stick jointed them cut the end of a broom handle off it works great then a good stiff brush!! I would have used a yellow sand and white cement though aswell the grey cement against the yellow doesn't suit but just my opinion.
Always love hearing people's opinions. I quite like the grey look to the mortar and I give it quite a heavy brush over to rough up the joints. Dont want them nice and smooth. 👍🏻😁
interesting fact, if the joints are tooled as work commences the correct terminology is actually joining. pointing is when tooling is carried out at a latter date.
@@RodianBuilds My old boss told me and i thought it was just his opinion, but then i read it in a great book "Brickwork 1 by W.G. Nash" Keep up the good work
Yeah the insides will be plastered. I will probably fly her aime plasterers in to help me as it's quite a lot to do on my own. Plastering is very difficult to get good at. I'm ok at it, definitely not the quickest and struggle with large ceilings
These Marshaltown jointers are dreadful and sorry but bed joints keep your jointer flat other wise you get lots of ripples in your jointing. On the whole I think you talk a lot of sense about brick work but like most modern bricklayers the pointing is not how I was taught. Also it's not 3 degrees and rising it's 4. Other wise keep up the work.
Hello Rodian your videos helped me get a distinction in GCSE construction so thank you and keep going
Thanks for the helpful video. You do very nice work.
Excellent training videos Rodian. You're a skilled tradesman and natural teacher
i guess it's kind of randomly asking but does anybody know a good website to stream new series online ?
Thanks for the videos. I was always interested in building crafts/trades. But now I need to learn how to lay bricks, because of a mailbox I hit. Hopefully now I can do a proper job. Thanks for sharing your insight and experience. I appreciate it.
The old bucket handles were half round galvanised steel. They were like rocking horse shit in the day. I have always used a bent piece of pipe. Great video.
Another great video man!
Cheers buddy 😁👍🏻
Very nice vid mate
I have just found you channel great stuff buddy but I prefer using a bit of hose pipe for them type of brick as jointing iron has no flex in it to follow contours of them brick but we all have our own ways and brickwork is a trade where there can be many options for finishing whether it's mortar colour or joint finish or type of brick so its a permanent learning curve for all bricklayers no matter what age as there's always something to learn or a different way to try.
Keep up the good work 👍
Glad o hear you're enjoying the videos. I do like using those pipe for rougher bricks like these but I didn't have any when I started rubbing it up, just continued using the jointer throughout the build
Your right hose pipe on those coarse rustic bricks would look better
great video man, and the one before 👍🏻
Thanks Rodian
Your tutorials have been extremely helpful.
I am building an off grid cottage in rural NSW Australia.
Hi rodian am using my lasses account atm have you used the barrel jointer yet mate and mint videos love them
Considering them bricks are all shapes the joints look good once you have gone over and then brushed them
Great channel! what mortar mix ratio was used for these bricks?
Really useful to see the process at length for someone like me who has never done it. Have you ever built a pizza oven?! I’m about to start my project with a pre-cast dome but the rest built completely from scratch. Would be great to see you tackle something similar
Hi loving your channel. For brick columns that have bricks fall apart and in need of pointing is it necessary to rebuild from scratch? The columns are supports for the porch and extends up to support the front of the roof. Or maybe you have videos on repairing brick columns that have almost collapsed lol?
It’s called a running iron bucket handle is half round that protrudes out also when it’s too wet it’s called squelching and best brush I use is a horse hair brush I think bon co make them foot long brush red hot to use
Now I've heard it said that when pointing you should have a brush in that left hand, and that fact that you don't means you didn't have enough butter? Thoughts?
try taking longer strokes when doing the horizontal joints. Use the heel for the verticals, interior angles of masonry walls are never struck concave they are finished flush.
I'll give it a go next time I rub up. When you say interior angles do you mean interior blockwork?
@@RodianBuilds block and brick or even brick on a flat surface. just the joint where the bricks meet at the 90 degree.
Kraft tools in USA makes a curved jointer which works great on common brick or rougher brick it keeps you from getting mouse ears on the vertical joints.
I think I need to come and work in the USA for a bit. Sounds like you have some different techniques and terminology over there.
The maximum I think anyone should have to point verts or beds is 10% of the brick. It's better looking when you're working and less work later which is more laid which is more money. They say in specs in the USA thumb print hard to strike or tool joints.
Bloody useless
Love your videos. I'm a mason from Amarillo Tx. Don't believe that thumbprint bull jive. I giggle every time I here that shit. This just me jointing or cleaning up my work just depends on the weather and the material. Some brick dry faster than others and some brick dont absorb moisture well as others. Do you only work on residential jobs. Do you do any commercial work also.
Super)
👍🏻
If you place the cross joint on better you would have little to point up in voids. It's taking you a long time to fill all the vert's and no time if you made the cross joint near in plane with the face of the brick when applying the mortar. Also when you get mortar on a trowel and you want it to stick tap the bottom of the trowel with the jointer.
Always love hearing how others work, new tips and tricks to learn. Thanks for the comments 👍🏻😁
Buttering the perp at 45 % angle can leave too many gaps to fill when jointing , flatten it before laying . Was taught not to use the heel as there's a chance of digging in , but it's all in the timing of when you joint up . Nice job it looks well .Bucket handle was invented when some guy got sick of trying to point the giant circular towers that sprung up during the industrial revolution and used his bucket handle .
I think those bricks look good flush pointed with a piece of lorry fanbelt and then a good brush
Piece of lorry fan belt?! Can day that's the first time I've heard if that. Sounds like it could be a nice finish 🤔 maybe I'll do that on the garden walls around the house. Cheers buddy 👍🏻😁
Lorry fan belt works a treat....these bricks don't suit jointing iron...there way to rustic i would stick jointed them cut the end of a broom handle off it works great then a good stiff brush!! I would have used a yellow sand and white cement though aswell the grey cement against the yellow doesn't suit but just my opinion.
Always love hearing people's opinions. I quite like the grey look to the mortar and I give it quite a heavy brush over to rough up the joints. Dont want them nice and smooth. 👍🏻😁
How did I find myself here? I'm hypnotised.
Why mock Flemish bond ?
We are the only ones that use a butter knife with bit of a curve in it for a cut joint way faster then round joint
Yes many differences.
interesting fact, if the joints are tooled as work commences the correct terminology is actually joining. pointing is when tooling is carried out at a latter date.
Well I've never known that! awesome bit of knowledge
@@RodianBuilds My old boss told me and i thought it was just his opinion, but then i read it in a great book "Brickwork 1 by W.G. Nash"
Keep up the good work
The faster you go and if u lay backwards to the line you’ll have to point your joints if u forward lay and take a extra second ur joints will be proud
ALL JOINTS SHOULD BE FULL WHEN THE BRICK IS LAID .
That's true!
are you going to plaster the inside? i tried plastering once, it was a horror story
Yeah the insides will be plastered. I will probably fly her aime plasterers in to help me as it's quite a lot to do on my own. Plastering is very difficult to get good at. I'm ok at it, definitely not the quickest and struggle with large ceilings
@@RodianBuilds try to explain the process as must as possible
Don't worry, when I get to the plastering I'll definitely be making a video about it 👍🏻 We'll have you plastering like a pro in no time 😁
@@RodianBuilds haha thanks thanks
😁👍🏻
I throw mortar on dry plank if I need stiff mortar. Like a pancake.
I find that the bricks dry it out quicker. Depends how warm it is out
Nice joints will make a bad job look good bad joints will make a good job look bad
These Marshaltown jointers are dreadful and sorry but bed joints keep your jointer flat other wise you get lots of ripples in your jointing. On the whole I think you talk a lot of sense about brick work but like most modern bricklayers the pointing is not how I was taught. Also it's not 3 degrees and rising it's 4. Other wise keep up the work.
Piss off back to old town then
The colour of the mortar does not suit those bricks.
I like how it looks when it properly dries out. Goes a nice light grey. Each to their own I guess 😁👍🏻
Rodian Builds what’s the mix ratio ?
Thats your opinion mate, i think it looks great. My eye and your eyes are different, none are better👍
all the houses are plastered here...unless u ran out of money lol
Ha ha lets hope I don't run out of money 🤣🤣