That is very pretty. But whatI didn't see shown in the video is the standpipe - a vertical pipe that is open ended and extends above the top row of tanks. Without that open ended standpiple the tanks can drain fine down to the filter but with time air can accumulate and either reduce the flow down to the filter or completely stop it resulting in overfiling the tanks.
Öncelikle emeginize saglik üstad, Video da dikkatimi ceken gercekten malzemelerin kalitesi, Silikon olsun, borular olsun, musluklar olsun hepsi üst düzey markalar, iscilige diyecek yok zaten Allah sizin gibi ustalarin, emekcilerin sayisini arttirsin, isini temiz ve kaliteli yapan her zaman kazanir.
Omg that's clean as hell. Would love to see the plumbing working. But WOW. Your skill making tanks is epic, also that glass cutter you used look effortless, a great craftsman makes his work look easy. Where did you get it? Great video.
Very nice! Only things I would have done different; run the water return plumbing behind the cabinet. Used a different valve instead of bright red and made the returns from the tanks so you could disconnect and clean the tanks. Hopefully as mentioned you have a standpipe.
Elinize sağlık üstadım yanlız bişey dikkatimi çekti şu vanalari akvaryumun tam orta noktasına denk gelmiş köşelerine denk getirilebilirdi zira akvaryum içerisinde çalışmayı zorlaştırır bitki vs dekor temizlik zor olabilir naçizane fikrim
You are definitely a professional and it is a pleasure to see you work, but the system could have been used in a different way, which would have made it easier to build and more beautiful, and much, much less pipes and fittings would have been used.
Gördüğüm en iyi usta daha iyisini göreceğimi de sanmıyorum ilk başta videolarını izlerken kendimi işin içinde buldum şuan bende akvaryumlar sumplar filitreler tasarlıyorum ve bu işi hobiden yukarısına çıkarıp meslek olarak bile yapmak isterim bütün bunlara ilham veren ilhami abime aydından selamlar 🖐
Daha önce hiç böyle bir tasarım görmemiştim. Eline emeğine sağlık. Muhteşem olmuş 👏👏
I love this video! Great work
The level of craftsmanship is unbelievable. Every cut, the laying of silicone, the precise measurements.....just simply amazing.
Yes amazing where the f are the fish dude
@@robertnix1999Well, he probably is a great craftsman but dunno a thing about fishes, much less bettas.
Wow
at least show how the water flows..
Camia usta görsün. İlhami cim yapıyosun bu sporu
That is very pretty. But whatI didn't see shown in the video is the standpipe - a vertical pipe that is open ended and extends above the top row of tanks. Without that open ended standpiple the tanks can drain fine down to the filter but with time air can accumulate and either reduce the flow down to the filter or completely stop it resulting in overfiling the tanks.
Öncelikle emeginize saglik üstad,
Video da dikkatimi ceken gercekten malzemelerin kalitesi, Silikon olsun, borular olsun, musluklar olsun hepsi üst düzey markalar, iscilige diyecek yok zaten Allah sizin gibi ustalarin, emekcilerin sayisini arttirsin,
isini temiz ve kaliteli yapan her zaman kazanir.
Beni kırmayıp bu kadar ayrıntılı bir işi yaptınız için çok teşekkür ederim.Gerçekten çok güzel oldu.
Özür dilerim hocam bunlar ne için ?
Beta Balığı Besleyecek Galiba
Would like to see the next part. Filling it with water and seeing the filtration.
Baştan sona sabır emek işi maşallah 🧿 Elinize emeğinize sağlık ustam
انا من المعجبين بك استاذ .. طلبت مساعدتك بتصاميم احواض لكن لم ترد عليه .. 🎉🎉
Ustam en güzel yerini resimle geçiştirmişsin olmadı ayrıca sistemin çalışması ve balıklar ile video bekliyoruz. Ellerine sağlık.
Realy good quality work,can i know tank bottom glass exact size to cut?
selamlar bu sistemden bende istiyorum yardımcı olurmusunuz
her videonda bu baska bisey diyorum abi. sasirtmaya devam :))
Harika olmuş çalışırken görmek isterdim doğrusu
Size of tank, black background sticker type,
فنان مبدع
This is yr second video that I saw, it seams that you always try to achieve perfection in everything that you do, the system is looking great. 👍👍
you cut the glasses professionally,,i admire that
Beautiful work, But I can't understand too many "Hydrants", Each row 1 Hydrant enough with 1 distributed pipe.
Huner olsa bile sabir işi bunu yapmak
Do you ship to USA?
Woow me encantó, podrías compartir las medidas de fabor 🙏🙏☺️☺️ gracias nuevo suscriptor
جيد جدا
Maşallah üstad. Emeklerine sağlık
💪💪💪💪
Çok yaratıcı çok ilginç ve o kadarda güzel. Eline sağlık.
Çok güzel olur bereket versin inşallah
Your beard is nice, your work is also very good, I'm from Indonesia and I like it
Good sir
Total costs of making it??
Lovely setup
What would you charge to build this?
MaşAllah abim süpersin eline emeğine sağlık
Você faz pra vender, e como posso comprar
Le problème avec ce système est que si il y a un poisson malade, ça va contaminer les 31 autres.
Omg that's clean as hell. Would love to see the plumbing working. But WOW. Your skill making tanks is epic, also that glass cutter you used look effortless, a great craftsman makes his work look easy. Where did you get it? Great video.
google glass cutter its a basic cheap cutter... very cheap
Please make also a guppy rack system
Very nice! Only things I would have done different; run the water return plumbing behind the cabinet. Used a different valve instead of bright red and made the returns from the tanks so you could disconnect and clean the tanks. Hopefully as mentioned you have a standpipe.
Thanks for the advice, but I explain all such subtleties to our customers and build aquariums at their request.
Too small for beta
В самый раз!
Hola buen trabajo ,de que medidas son las peceras
Kita yang masih pake toples 😂
Complimenti,bravo veramente 👋👋👋
Hayranlık ile izledim sonuna kadar. Emeğinize sağlık süper olmuş gerçekten.
i love betta fish ❤️
nice..
Any video of how does it work? With fish etc.
Please follow instagram. I will share it there as soon as possible.
Cut glass : no handglove
Install piping : use handglove
I like ur style man..
thanks dude
Elinize sağlık üstadım yanlız bişey dikkatimi çekti şu vanalari akvaryumun tam orta noktasına denk gelmiş köşelerine denk getirilebilirdi zira akvaryum içerisinde çalışmayı zorlaştırır bitki vs dekor temizlik zor olabilir naçizane fikrim
müthiş bir iş çıkarmışın İlhami Kul herzamanki gibi yine mühendislik harikası tebrikler
Very nice! I wish you could make all of my tanks!
Bro are u making this full stand setup for any costomer
Yes.
The way he applied the silicone was sooo satisfying 😌
Allah razı olsun.Bu tür armatürleri nereden alabilirim?
ustam emeğine sağlık ,siyah kaplama için kullandığın materyal nedir
Teşekkürler. Mdf Lam
Akvaryum arkasındaki Siyah Folyo
@@ilhamikul teşekkürler hocam
Başarılı bir çalışma olmuş, tebrik ederim. Sizin gibi işini seven, akvaryumu seven insanları görmek çok güzel. Hayır işler, başarılar dilerim.
Mükemmel
Balıklarla olan resmi veya videosu var mı ?Sistem çalışırken görmek isterim.Muhteşem bir çalışma olmuş.
Fırsat olursa Toplulukta paylaşmayı düşünüyorum
Beautiful super work brother 😍👍
abi cok güzel yapmissin eline saglik da bu sistemi nasil almanyaya getirez :)
Teşekkürler. Sen karar ver yollamak kolay. Sistem bozulup kolay bir şekilde toplanabiliyor
Neat build! Except one thing that the bettas cannot flare with each other
Så bra super fint. Vad kostar allt komplett?
I absolutely love this betta system…approximate cost please!
Wounderfull setup
Sump filteration system should be in detail it is the main part of setup
Do you make the rack?
Send to the US, I like to purchase this setup
Whatsapp- +905336222626
Beautiful sir... 🥰🥰🥰
Nice man. 👍🏻👍🏻👍🏻. Love from INDIA ❤️❤️
Just love it..thanks from 🇩🇰..👑
Buen trabajo , pero el Betta se mete en el agujero de salida de agua ,al pensado.
Güncel fiyat bilgisi almak istiyorum aynı sistemin
Amazing
Great #RGMMAGETAN
This is called painstaking labour❤
You are definitely a professional and it is a pleasure to see you work, but the system could have been used in a different way, which would have made it easier to build and more beautiful, and much, much less pipes and fittings would have been used.
Eline emeğine sağlık Üstat.
Professional👍🏻👍🏻👍🏻
great job, interesting congratulations
thanks
i think the craftsmanship was wasted with the housing choice. looks like particle board furniture from target. lets get some grain in there.
Woah dang that is good setup for Betta
Can you link the products and tools to an Amazon page. Thank you for an informative video
Wow amazing.
Very nice 😍😍😍😍😍😍
I would love to have a couple of these
Kaca
Wow,it's an amazing masterpiece..
You cut glass without fear!
Your from which country?
Türkiye
I want this setup how can i buy this readymade in india
I am big fan of fighter fish 😍
Wow amazing work, need extra patience to make it all.
it sure is
Gördüğüm en iyi usta daha iyisini göreceğimi de sanmıyorum ilk başta videolarını izlerken kendimi işin içinde buldum şuan bende akvaryumlar sumplar filitreler tasarlıyorum ve bu işi hobiden yukarısına çıkarıp meslek olarak bile yapmak isterim bütün bunlara ilham veren ilhami abime aydından selamlar 🖐
teşekkürler kardeşim. aleyküm selam
I have stopped seeing DIY clips other than yours.
amazing work
Can you make one to sell?
Yes, Whatsapp +905336222626
Ficou belíssimo, amei !!! ❤️👏🏻👏🏻👏🏻
prison pour beta !!!!!!!! mais certainement pas aquarium !!!!!! honteux!!!
Amazing work , god bless you
That is awesome!!!
Obrigado pelo vídeo era oque eu tava procurando 👍👍