DIY grinder from hard drive | Ideas with old hard drives | Mr TT Homemade
Вставка
- Опубліковано 3 жов 2024
- Share with everyone how to utilize old computer hard drives to make grinders. Everyone should use the circuit included in the hard drive, because the circuit has the function of shutting off when the blade gets stuck.
Songs used in this video are from UA-cam Music Library:
Zula - Mini Vandals.
8 Year Anniversary - Diamond Ortiz.
Crystal - Vibe Tracks.
Golden Empire - The 126ers.
Invisible - Vibe Tracks.
#homemade
#diy
#project
#howtomake
#electronic
#mrtt
#ideas
#mrtthomemade
#handmade
#harddrives
#hdd
#grinding
#grindingmachine
#pvc
#cuttingmachine
#machine
#machines
Thank you for watching my video, hope you enjoy the video don't hesitate to like, comment, share and subscribe!!
Please watch for reference and entertainment only, do not follow this at home. Thank you for your comments ❤️
😊 yes reference and entertainmes is generasi for any more people... But let me follow litle litle 😂
Great job!!! Thank YOU for video!
Gupta Electronics53
Big brain
and simple
Nice videos 👍
❤❤❤👌❤❤❤That Good..!
This is hilarious
Nice 👍
Brow... Me hardisk spin for 7 second only .. and the off😊😅
I do not recommend you to do it. Please use specialized tools.
We make horizontal grinder not hand...
OSHA would have gone insane if it saw this.
You are leaving out protective features and it has no shield for the grind disc incase it explodes and learn to hold the thing properly or you'll be left without your fingers
You are very right, thank you for your comments👍
safety...... you still have 5 fingers, 2 on this hand and 3 on the other. that said, try to use the discs as weight inertia where the spacer is put. it will have more power before it stops and a bigger slow down curve.
Safety features left the chat.
Gupta Electronics53
Circuit wise it is a really good circuit. I wanna know more about driving the motor. How can i contact you?
You can refer to other videos on youtube. Thank you for your interest.
Gupta Electronics53
Sir, my hard drive is not running after I removed all internal parts. I have tested with computer's smps power supply. Please tell me the reason.
Check the power supply, if the power supply is ok. Maybe the hard drive is broken.
@@mrtthomemade Thanks for the reply sir. I have found the problem.
When I connect it with sata cable, it works perfectly. Motor not runs after removing sata cable from computer and hard drive.
The way you hold the grinder really makes me anxious. Be careful aight?
Thanks
HD SEAGATE SATA NÃO FUNCIONA
That power supply looks like its about to explode...
You can use another source with greater capacity.
Зачем если есть очень дешевые болгарки на аккумуляторе 12в которые мощнее в раз 5 и стоят они дешево
What do you mean, why not buy cheap machines?
not safe
please use 3'' not 4'' or 5''
It measures 107x1.2x16mm
How many adverts did this video have in it? = money sucker 😠, he only wants us to watch the advertising [cashcows] and not the video itself/recreate the contraption featured in the video ~ In this case the thing is dangerous and awkward; a DIY angle grinder with no shield and powered by the original HDD PCB > a repurposed PC PSU for 12v
FAKE! LIE!
true the motor is too small but has about 14000rpm and a high toque
Stupid at a higher level. Just because you can doesn't mean you should. You must be a regular at the emergency department.
I will pay more attention, thank you very much.
Saludos, creo como referencia y valentía, el video está bien para iniciar proyecto, pero más seguridad!
Gupta Electronics53
jump pin 2 and 6 in data connection
Great suggestion