Thank for this. Worked a treat for my head unit (2gb x 64gb). Replaced the firmware with the supermod 8 and no longer crashes the canbus on my peugeot 206. And don't lag now when using DAB and forward facing dash cam at the same time, let alone the constant crashing.
On newer units, with all conectors in the same line, the trick that worked for me was to keep it plugged, give the reboot command and "turn the car key" off. Than plug it with start enabled and "turn the car key" on.
Hi @@extrememod_ahu , can you please help me with my android unit? I have it working just fine, then I wanted to connect the roof top monitor, and this is when the issue started. The screen of my unit went white and unresponsive. I tried resetting it from the reset button, power cycle, nothing. I do not have the kernel version or any other data, as I cannot start it. I did open it up and on the pcb it says Topway T3L-A109D4X1-V2. Please, how can I reset it or something that will make it work again?
Hi, I followed the video as is, but when I try to Readback the rEMMC_USER, it stops at 13% (4gb) Error 4009. I have tried it on three other computers and the same thing happens. I have rooted the unit, and the same thing happens too. What could be the problem? There is no information on the internet about error 4009. My unit is an ALPS AC8227L Demo. Thanks and regards.
Backed up and flashed back with no issues thanks. ive come to install new rom yet on first part it says.. 6. Only tick boxes BOOT, SYSTEM (sometimes called ‘ANDROID’) and VENDOR. i have no vendor option in the options.
May be a long shot but here goes. I did this to my Podofo unit and whatever I treid Android auto won't work. Any suggestions? Thanks for such dilligence!
912 volt DC power supply will work and you don't even need to spend the computer power supply.. and you don't even need that special connector.. just twist the wires together with wire nuts... I have the special adapter for a universal 12-volt plug set.. but for those that don't and don't need to spend money unnecessarily
I did everything like the video and it works now what do I do with it how do I install the MOD in other videos and seen things that are not done here I need something 100% detailed if you have to pay tell me the price you don't want to damage a unit just because I skip a passed
Hi I am not able make USB connection with my unit - using your drivers. The unit got stuck on logo anbd I am not able to SP flash tools without USB connection. Pls can you help ? Thanks
Hey, I recently bought Nakamichi NAM5260 and for some reasons it was havibg problem with the sound. Like the sound in the car speakers were in waves like high and low. I contact the guy who installes it and he told be to take the main plugb out and put it back. I did the same and now it is not turning back on. It shows Nakamichi logo screen and then screen goes off. Could you please help me out with it?
My headunit is already bricked and I could not make any backup. I will need to test point the unit, however I don't have the scatter file. How can I create the scatter file from the firmware files?
Brother thank you for sharing your wisdom and knowledge with this video. I tried to follow your instructions but for my unit YT7620B I need to push reset for a second and then keep it pressed for the HU to communicate with PC, it has MT6761 so the scatter file was not compatible either. Got a scatter file for this chip and the memory test option is now different and only has DRAM Flip test. Any ideas?
It's a different Mediatek chip so chances are, this tutorial will only partially apply. Unfortunately we haven't worked with your unit type so we can't advise any further right now
@@extrememod_ahu Thank you for your reply. I did find some info though, I have to press once the reset button, release it and then keep holding it again and then the software will start to do its thing. Kind of a pain if one has to keep that button pressed throughout a dumping process for a 64Gb unit....
That's really a helpful guide for beginners. I am facing a problem. drivers are installed correctly and the HU also connects and shows up in the device manager but SP flash tool is unable to get/read anything from the HU, I don't know what I'm missing here. plz help me out i really want to update my HU. tried with 2 different PC both running win 10
Hi subscribed good job you're doing... 🙂 Do you have the flash firmware of yt9216bj_00012_v001 ? Mine hangs on the android boot logo when switched on. Any solution?
Thanks for new video. Little extras helped a lot. If I already unBricked my device 2x with backup flash and have unlock and debug options already can I just skip firmware step and do TWRP recovery? Mine is 9216bj but 2gb ram not 1gb. That’s my cheap one for testing and will share info and help others. Other is 10.1 api 27 not messing with that one yet.
Glad you found it useful. As for installation, we can only advise on our own software packages. If you're using any of the packages you downloaded from any of our threads on XDA, please post your questions there.
My HU stuck on TWRP couldn't go forward. recovery.img causing the problem. I placed the original recovery.img and tried again, the TWRP wouldn't recognize the file. The HU started normally without any changes.
I have a px5 android DVD 6.0.1 in. I want to update it to android 8.0 if I can can you send me the update for that thanks I really never did anything like this before but I really won't to figure it out can you help me out thanks
I Have the same unit with not booting rom stuck on updateing. I dont have any back up of the unit. or the rom , How can I recover back to factory so that it will work. YT9216-VER 0.1 Any help will be Great.
I try this but spflash tool is not recognizing the first step (memory test). I already install legacy drivers. My head unit is a yt7212b ( AC8257 cpu). I try read memory with yours scatter file. I found the 8257 scatter file, but Memory Tab show different parameters. Any idea? How I can know that my computer is recognizing the device ?
The SP Flash Tool will not detect the head unit unless all cables including power are removed except for the 4-pin USB? In other words, it must be unplugged from the car when trying to flash? Thanks
@@extrememod_ahu now I flash a firmware working but touch not working and the information changed to 2g ram instead of 1g ram All working expt the touch
I have amdroid unit YT9260 mother board amd its touch suddenly stop working sp wt u think should i update the firmware it has android 10 and its a 8227l
Hello. Section PART_USER FlashTool merges 15 minutes and turns off. I don't know how to divide into blocks and then connect them. Do I have a way out? You merged 40 minutes.
After installing the drivers, my pc doesn't see the HU. It's a 8227L (exactly the same thing as in your video, same home screen, only a different colour plastic on the back). I connected it to power. Memory test doesn't do anything. I'm using Windows 11. Any idea what's going wrong?
This method is only tested on Windows 10 and below. Also there are many different variants of 8227L head units. Check our "Test Point Recovery" video. Does your motherboard look the same?
Nice video, I made it exactly according to the video, it installs the old driver to the universal usb after uninstalling the software, not the hardware, nothing remains, running splas tool shows nothing, I have win 11
Will this backup work for a 768 x 1024 ( 6bit ) display tesla type head unit. You also have a video for a complete fresh copy of Android system, all the mcu and model fit the criteria you have in the instructions except, again, the resolution as mentioned above 768 x 1024 do you thinkl this upgrade will work.
This heavily depends on the type of your motherboard but in theory this should work on most Mediatek devices. You might need to use another generic scatter but try the one included first.
Hi, is there any way this patch works for F9212A/B? I know the whole rom almost surely won't work for my radio, but can I at least be able to root it? I have a ROM and can extract the scatter file from there.
The procedure will work the same way yes. However you might need to connect your head unit to power after inserting the USB cable. Our software will however not work on your head unit.
Normally you only need to connect the USB cable when flashing via SP Flash Tool. Sometimes you need to connect the head unit to power after connecting the USB cable. When running ADB, then you need to have you head unit powered on, booted and connected to your PC.
@@extrememod_ahu I did all steps carefully and before flashing software where i had to tick box BOOT, ANDROID, AND VENDOR i was missing VENDOR box there was only boot, android. so i flashed , but nothing happened, same soft appeared. aSorry for bad english.
@@extrememod_ahu yes i did full reset, but it seems that after flash without VENDOR my old soft was booted with my old files, not like in your post pictures. So it took time to flash , but it seems nothing was flashed , just old software booted.
Sometimes you need to connect your head unit to power 5 seconds after inserting the USB cable. And then keep it connected to power until you see "OK" screen. Try that.
@@extrememod_ahu It does not always recognize, I try what you tell me, and the car radio does not recognize me, what other steps I can do or what windows I can format my pc, please help me.
I never knew that someone will come up with such simple amd helpful tutorial ,thanks a lot... A couple of months took me to figure out all these flashing ,connecting with usb A to A cable,and all ,4pda is like an ocean of information. (9216ch) is im having all i want is to put Android 8 or 9 or 10 but im not finding any rom .. can you help me ..?
Hello I appreciate the video very much. I have an Android Q92-A2-CPL_00020_V001 Android os: 13 car audio F7.3.9 (x2) can pro: V9.0.7 no canbus ddr: 2g falsh: 32G cpu: A7 1.5ghz x 4 mcu: 4.9 (x2) Kerne:l 4.14.116 (Linaro) Build: android-trunk-p0 I didn't want to remove the unit, so I disconnected the car battery and followed your instructions. I tried both usb ports because I didn't know which one was the one with four pins. Both attempts on each usb port, I did the Flash Tool Memory Test, Start. Flash tool didn't respond and just sat there as if I hadn't installed the drivers or something. Any ideas? I followed the instructions very carefully and I don't believe I missed a step as everything looked the same as the video and I'm using Windows 10. I have Google searched extensively and can't find anything about a Q92 model. Help would be very much appreciated
Topway TS7 units are completely different. They are based on UIS8141E chip and are not meant to be fiddled with. They are probably the least modifiable head units and are meant to be well-configured from the get-go. TS9 are a little bit better in that way.
@@extrememod_ahu you mean to say all topway series which i think is (t3,ts7,t5,t9) are in same class? we can not modify them like mediatek right? so should i forget about rom flashing of all this? or is there possibility of any?
@@rajuradios Topway head units are based on different chipsets but in general are much less modifiable than Mediatek. In fact, Mediatek is by far the most modifiable technology while being the cheapest one as well. Rockchip technology powered by MTCx MCU chips is a close runner-up as far as mods go.
I go Test mode and install driver like video. then install driver ( don't click delete the driver software.....) .press " start" and plug usb 4 pin also don't detect COM.
Make sure to restart the computer after installing the drivers. If this doesn't help, after inserting the USB cable, connect the unit to power - WITHOUT releasing the Test Point (you will probably need a second person to help you)
Provided your drivers installed correctly and you aren't running Windows 11 - try to connect your unit to power, after inserting the USB cable. Then disconnect from power before removing the USB cable
Nice tutorial with good explanation. I have couple of questions. 1. Everytime when we take backup should I disconnect and reconnect and turn on the headunit?
@@extrememod_ahu i am on windows 11 and followed your instructions on video to install drivers but head unit is not connecting when I insert the USB cable. What would be the issue?
Hello there good sir, is it possible to install Android OS on non android units like Alpine EX900 ? There are some that did it on UA-cam but they are on different country and they are charging big money for it , can you make a tutorial or let me know if it's possible?
It is NOT possible unless you do the necessary hardware modifications first. This is an extremely difficult task and makes little sense. If you are worried about losing the sound quality by purchasing an Android Head Unit, get a head unit with digital sound output (make sure your aftermarket car amp has a Digital IN). Alternatively, you can order one of our custom-made units that will outperform anything currently available on the head unit market in the similar price range.
Anything if you don't hav3 Anything backet up. ?? Plz what can I doo trying to sort it for weeks now unfortunately no luck plz help if you can / know how or what to do plz any one ? Thank you ❤❤
You need to have a professional to restore it for you if it's at all possible. We can give it a go if you are located in the UK or wish to send your unit to the UK.
after i install the mediatek drivers i will be able to connect the head unit on the pc and run the adb commands? this all i need and the driver version works on windows 11 ?
Hi, i have 2 head units 8227l, one works and the other one have firmware problems, can i make a backup from the working one and flash it on the bad one? Thanks in advance.
While the internal Mediatek chip is the same as in the YT92 units, the rest is different so this tutorial will only partially apply to your unit type. Unfortunately we can't provide more information at this time
hello i have a problem with YT9216bj i have rom Кастом прошивка 9216v7.3 ver 4.0 от Stranger21ufa form 4pda. Few days a go i had a problem with GPS. Gps dont find satelites and a few days i cant turn on wifi bluetoth. I must few times reboot device to start the radio app and listen to the radio . It is a hardware problem because im flash lower ver. it was the same. Can je help me please or place here link other web side where it wsas dealt with? Thx
Did everything work with the stock firmware? If you had issues before flashing the custom firmware, then it's likely a hardware issue. You could try to update the MCU but it's a highly risky process and can brick your head unit beyond normal means of repair.
@@extrememod_ahu I am tested few firmware and its the same. And mcu ? I dowgrade to 3.5 update back to 4.0 and 4.6 without changes. Before and after flash modified firmware everythink was fine. I have this problem 1 week. I used modified firmware 2 months and everythink ok. Do you thing ist problem from MCU?
can you help to find the stock rom of my astral head unit ? Android: F9212B_00020_V001 Android os: Android 11.0 XY AUTO: F7.0 (X2) CAN Pro: 9.0 (disconnect): no canbus DDR: 2G FLASH: 32G cpu: A7 1.3GHz x 4 display: 1024*600 MCU: 4.0 (X2)
Help friend head unit flash wrong rom, but founded test point, but format flash show ''storage type mismatch" scatter storage type is HW_STORAGE_EMMC scatter storage type is HW_STORAGE_NAND please help.
It's not the same on all these models. We're going to post a video later on how to restore backup, change firmware between different Android versions and updating current firmware to another one with same API level.
hi i need your help my device with board 9260 v1.2 label 9218 dhj 2gb/16gb is in boot loop after wrong flash by usb android upgrade now i managed to connect as mediatek usb port after shorting test points but i dont have the stock rom every time i flash a preloader i get error 4034 or 5054 dram enable fail what should i do
Visit our XDA thread and install our software package. Not only will it restore your head unit but also make it pretty awesome: forum.xda-developers.com/t/guide-android-8-api27-supermod-for-yt9216bf-yt9216cfj-yt9216bj-yt9216bfj-yt9216cj-root-viper4android-twrp-custom-ui-brick-recovery-and-more.4318121/
Hey there, i am using 8227l 9216b unit when i choose system language other than english (i tried on turkish and deutsch) fm radio app crashes when i want to control with steering wheel control. Do you have any solution this ? I'm using your firmware package updated on september.
Great job thanks for the video need guys like you to keep passing your knowledge along
Follow these backup steps.....these will save your unit. Perfect video 🙏
I have the same problem as you and I can't solve it!
Sorry, the message wasn't for you.
Thank for this. Worked a treat for my head unit (2gb x 64gb). Replaced the firmware with the supermod 8 and no longer crashes the canbus on my peugeot 206. And don't lag now when using DAB and forward facing dash cam at the same time, let alone the constant crashing.
On newer units, with all conectors in the same line, the trick that worked for me was to keep it plugged, give the reboot command and "turn the car key" off. Than plug it with start enabled and "turn the car key" on.
finally good tutorial on how to backup and restore
Many thanks Anton.
Hi @@extrememod_ahu , can you please help me with my android unit? I have it working just fine, then I wanted to connect the roof top monitor, and this is when the issue started. The screen of my unit went white and unresponsive. I tried resetting it from the reset button, power cycle, nothing. I do not have the kernel version or any other data, as I cannot start it. I did open it up and on the pcb it says Topway T3L-A109D4X1-V2. Please, how can I reset it or something that will make it work again?
Hi. Awesome tutorial. I stop in the step- Memory teste- Start. The head unit doesn’t appears. But a small blue led is on in the motherboard
Can I use this method and your same scatter files on a TS9 system type and MT8163 chip?
Hi, I followed the video as is, but when I try to Readback the rEMMC_USER, it stops at 13% (4gb) Error 4009. I have tried it on three other computers and the same thing happens. I have rooted the unit, and the same thing happens too. What could be the problem? There is no information on the internet about error 4009. My unit is an ALPS AC8227L Demo. Thanks and regards.
hi bro , thanks for this video , but when im taking backup of preloader the unit restar and the backup not go finish , my unit its JAC8229 VER-03
Backed up and flashed back with no issues thanks. ive come to install new rom yet on first part it says.. 6. Only tick boxes BOOT, SYSTEM (sometimes called ‘ANDROID’) and VENDOR. i have no vendor option in the options.
That's okay, if it's not present, just skip it.
@@extrememod_ahu Thanks for that all worked great custom rom and apps installed now to get it back in car thanks again :)
@@simoncox542 happy to hear that. did you install one of our software packages or something else?
I installed the supermod 6 new one off XDA..
hello , i got a AllWinner T3-P1 sun8iw11p1 brick after update ,have what to do with him or garbage?
You can reach out to us through our Facebook page and we can try and help you.
hi! im following all the steps in the video but any of my 2 pcs can connect to my unit (yt9216cj)... what can i do?
May be a long shot but here goes. I did this to my Podofo unit and whatever I treid Android auto won't work. Any suggestions? Thanks for such dilligence!
this method works with any android navigation model regardless of the type of processor it has. Mine is model 8259
On most Mediatek units yes.
912 volt DC power supply will work and you don't even need to spend the computer power supply.. and you don't even need that special connector.. just twist the wires together with wire nuts... I have the special adapter for a universal 12-volt plug set.. but for those that don't and don't need to spend money unnecessarily
I did everything like the video and it works now what do I do with it how do I install the MOD in other videos and seen things that are not done here I need something 100% detailed if you have to pay tell me the price you don't want to damage a unit just because I skip a passed
Hi I am not able make USB connection with my unit - using your drivers. The unit got stuck on logo anbd I am not able to SP flash tools without USB connection. Pls can you help ? Thanks
hello i have f9210i i cannot connect to sp flash but i follow your procedure do you think i need test point for thie unit
Seems like my Device (Medion Lifetab E1044) can't connect to SP Flash Tool .
Do you have any recommendations?
Good job, good tutorial, thank you
Hey, I recently bought Nakamichi NAM5260 and for some reasons it was havibg problem with the sound. Like the sound in the car speakers were in waves like high and low. I contact the guy who installes it and he told be to take the main plugb out and put it back. I did the same and now it is not turning back on. It shows Nakamichi logo screen and then screen goes off. Could you please help me out with it?
Hello sir android mein data daalne k liye konsha tolls h plz name tolls
hello I have a question to flash i need 4-pin cable? or a 6-pin cable will also work
Only 4pin for XYAuto units as shown here
My headunit is already bricked and I could not make any backup. I will need to test point the unit, however I don't have the scatter file. How can I create the scatter file from the firmware files?
My YT9216B head unit has NAND memory. How can I make a generic scatter & preloaded to create a backup?
Brother thank you for sharing your wisdom and knowledge with this video. I tried to follow your instructions but for my unit YT7620B I need to push reset for a second and then keep it pressed for the HU to communicate with PC, it has MT6761 so the scatter file was not compatible either. Got a scatter file for this chip and the memory test option is now different and only has DRAM Flip test. Any ideas?
It's a different Mediatek chip so chances are, this tutorial will only partially apply. Unfortunately we haven't worked with your unit type so we can't advise any further right now
@@extrememod_ahu Thank you for your reply. I did find some info though, I have to press once the reset button, release it and then keep holding it again and then the software will start to do its thing. Kind of a pain if one has to keep that button pressed throughout a dumping process for a 64Gb unit....
Can you edit the network file with this method
Hi, and thanks for the video. Do you have a guide for KSW head units? Can I backup the unit?
Can i use this tutorial with all head unit 6288a uses a same chipset mtk 8227L?
That's really a helpful guide for beginners. I am facing a problem. drivers are installed correctly and the HU also connects and shows up in the device manager but SP flash tool is unable to get/read anything from the HU, I don't know what I'm missing here. plz help me out i really want to update my HU. tried with 2 different PC both running win 10
Thank you for the feedback. So after inserting the USB cable, 3 sec later connect your head unit to power.
very usefull, but, if i unerstand well, you disconnect usb cable after any operations??? tks
Every time
Muy buen video, claro y directo! me funciono sin problemas
Glad to hear it
Hi subscribed good job you're doing... 🙂 Do you have the flash firmware of yt9216bj_00012_v001 ? Mine hangs on the android boot logo when switched on. Any solution?
Thanks, glad you enjoyed it. Visit our website for our custom firmware and follow the link for YT9216BJ: extrememod.co.uk/our-projects
Great tutorial, but what's up with the annoying "music" (if it could be called that)?
Thanks for new video. Little extras helped a lot. If I already unBricked my device 2x with backup flash and have unlock and debug options already can I just skip firmware step and do TWRP recovery? Mine is 9216bj but 2gb ram not 1gb. That’s my cheap one for testing and will share info and help others. Other is 10.1 api 27 not messing with that one yet.
Glad you found it useful. As for installation, we can only advise on our own software packages. If you're using any of the packages you downloaded from any of our threads on XDA, please post your questions there.
My HU stuck on TWRP couldn't go forward. recovery.img causing the problem. I placed the original recovery.img and tried again, the TWRP wouldn't recognize the file. The HU started normally without any changes.
What about Eincar 2Din HU? Does this procedure would work?
I have a px5 android DVD 6.0.1 in. I want to update it to android 8.0 if I can can you send me the update for that thanks I really never did anything like this before but I really won't to figure it out can you help me out thanks
I Have the same unit with not booting rom stuck on updateing. I dont have any back up of the unit. or the rom , How can I recover back to factory so that it will work. YT9216-VER 0.1 Any help will be Great.
from where do yo get the userdata.img with 137.247kb shown at 21:21?
There is no previous explanation
14:00 you will see it as ROM_USER 15gb
Where is the moment you explain how to connect to usb ?
when i hit start to test the memory it never completes.. like its is had not found the device
3 seconds after inserting the USB cable, connected your head unit to power.
@@extrememod_ahu didn't work for me btw im still connecting the device to my car
@@eng-alialghabban5985 worked plugging the ac power
Grate work really usefull. I will try to do it. 👍
How open recovery? RSt button not working, dont flash up panel on the left side
I try this but spflash tool is not recognizing the first step (memory test). I already install legacy drivers. My head unit is a yt7212b ( AC8257 cpu). I try read memory with yours scatter file. I found the 8257 scatter file, but Memory Tab show different parameters. Any idea? How I can know that my computer is recognizing the device ?
found the issue! I need to use 6 pin usb cable. Now my computer detect the headunit
Im trying doing exact steps but ram test is showing nothing i tried with 3-4 car stereo i dont know why
The SP Flash Tool will not detect the head unit unless all cables including power are removed except for the 4-pin USB? In other words, it must be unplugged from the car when trying to flash? Thanks
Exactly. You should always do these kinds of installations on your desktop
@@extrememod_ahu Edit: Nevermind, I am retard and was using the 6-plug (with 4 pins) cable by mistake!!̶
T̶h̶a̶n̶k̶s̶ ̶f̶o̶r̶ ̶r̶e̶p̶l̶y̶!̶ ̶I̶ ̶h̶a̶v̶e̶ ̶i̶t̶ ̶i̶n̶ ̶t̶h̶e̶ ̶l̶a̶b̶ ̶a̶n̶d̶ ̶h̶a̶v̶e̶ ̶i̶n̶s̶t̶a̶l̶l̶e̶d̶ ̶t̶h̶e̶ ̶d̶r̶i̶v̶e̶r̶s̶ ̶i̶n̶ ̶s̶a̶f̶e̶ ̶m̶o̶d̶e̶.̶ ̶W̶h̶e̶n̶ ̶I̶ ̶t̶r̶y̶ ̶t̶o̶ ̶r̶u̶n̶ ̶t̶h̶e̶ ̶m̶e̶m̶o̶r̶y̶ ̶t̶e̶s̶t̶,̶ ̶w̶i̶t̶h̶ ̶o̶n̶l̶y̶ ̶t̶h̶e̶ ̶4̶-̶p̶i̶n̶ ̶c̶o̶n̶n̶e̶c̶t̶e̶d̶-̶ ̶t̶h̶e̶ ̶b̶a̶c̶k̶ ̶p̶a̶n̶e̶l̶ ̶i̶l̶l̶u̶m̶i̶n̶a̶t̶e̶s̶ ̶t̶h̶e̶ ̶b̶l̶u̶e̶ ̶l̶e̶d̶ ̶i̶n̶d̶i̶c̶a̶t̶i̶n̶g̶ ̶i̶t̶ ̶r̶e̶c̶e̶i̶v̶e̶s̶ ̶p̶o̶w̶e̶r̶,̶ ̶h̶o̶w̶e̶v̶e̶r̶ ̶t̶h̶e̶ ̶c̶o̶m̶p̶u̶t̶e̶r̶ ̶d̶o̶e̶s̶ ̶n̶o̶t̶ ̶d̶e̶t̶e̶c̶t̶ ̶t̶h̶e̶ ̶d̶e̶v̶i̶c̶e̶ ̶(̶n̶o̶ ̶c̶h̶i̶m̶e̶)̶ ̶a̶n̶d̶ ̶t̶h̶e̶ ̶M̶e̶m̶o̶r̶y̶ ̶T̶e̶s̶t̶ ̶d̶o̶e̶s̶ ̶n̶o̶t̶ ̶i̶n̶i̶t̶i̶a̶t̶e̶.̶ ̶A̶f̶t̶e̶r̶ ̶~̶3̶0̶ ̶s̶e̶c̶o̶n̶d̶s̶ ̶t̶h̶e̶ ̶L̶E̶D̶ ̶t̶u̶r̶n̶s̶ ̶o̶f̶f̶.̶ ̶A̶t̶ ̶n̶o̶ ̶p̶o̶i̶n̶t̶ ̶d̶o̶e̶s̶ ̶t̶h̶e̶ ̶d̶e̶v̶i̶c̶e̶ ̶s̶h̶o̶w̶ ̶i̶n̶ ̶D̶e̶v̶i̶c̶e̶ ̶M̶a̶n̶a̶g̶e̶r̶.̶ ̶D̶o̶e̶s̶ ̶t̶h̶e̶ ̶S̶P̶ ̶F̶l̶a̶s̶h̶ ̶T̶o̶o̶l̶ ̶n̶e̶e̶d̶ ̶t̶o̶ ̶b̶e̶ ̶r̶u̶n̶ ̶i̶n̶ ̶s̶a̶f̶e̶ ̶m̶o̶d̶e̶ ̶a̶s̶ ̶w̶e̶l̶l̶?̶
Hi sir, is it possible for you to find a way for me to root topway ts7 unit? its using unisoc 8141 (UIS8141E) cpu
sir plz one video for mt6580 backup and firmware
Please help I have no backup and no scattere file and I did fault I flashed with the backup scatter and preload files then its breaked please help me
You should never make system-wide changes without a backup. We can try restoring your unit if you wish to send it to us. We are located in the UK
@@extrememod_ahu im in egypt can we make it remotely? And ill buy a coffee for you 😊
@@Th3life depending on the unit, this can take many hours to fix and cannot be done remotely.
@@extrememod_ahu now I flash a firmware working but touch not working and the information changed to 2g ram instead of 1g ram
All working expt the touch
@@Th3life that means incompatible firmware
I have amdroid unit YT9260 mother board amd its touch suddenly stop working sp wt u think should i update the firmware it has android 10 and its a 8227l
Unlikely if it stopped working without any previous modifications to the Android system. Open it up and check the smallest flat cable.
is rfs/ imei is also backeduo this way?
does it works for alpine honda digipad 2.0 with chipset telechip tcc8971 ? my unit frozen at booting logo only reverse cam working please help me out
No, as far as we can tell, this method only works with Mediatek devices
Does anyone have flash files for xl6113 updated wrong firmware cant access any info
WHEN I UPLOAD THE BOOT1 IN WWR I DO NOT UPLOAD THE FILE ROM, HOW CAN I SOLVE? I FOLLOWED THE GUIDE STEP BY STEP
Hello. Section PART_USER FlashTool merges 15 minutes and turns off. I don't know how to divide into blocks and then connect them. Do I have a way out? You merged 40 minutes.
Sounds like your USB goes into sleep on you computer. Turn off the USB Suspend mode
After installing the drivers, my pc doesn't see the HU. It's a 8227L (exactly the same thing as in your video, same home screen, only a different colour plastic on the back). I connected it to power. Memory test doesn't do anything. I'm using Windows 11. Any idea what's going wrong?
This method is only tested on Windows 10 and below. Also there are many different variants of 8227L head units. Check our "Test Point Recovery" video. Does your motherboard look the same?
Nice video, I made it exactly according to the video, it installs the old driver to the universal usb after uninstalling the software, not the hardware, nothing remains, running splas tool shows nothing, I have win 11
The guide covers up to Windows 10.
Hi. How I reinstall the original firmware xyauto using this tool
Will this backup work for a 768 x 1024 ( 6bit ) display tesla type head unit. You also have a video for a complete fresh copy of Android system, all the mcu and model fit the criteria you have in the instructions except, again, the resolution as mentioned above 768 x 1024 do you thinkl this upgrade will work.
This heavily depends on the type of your motherboard but in theory this should work on most Mediatek devices. You might need to use another generic scatter but try the one included first.
Loved your content brother. I'm using 9216cj i want to try custom firmware can you help me with that please?
Hi, is there any way this patch works for F9212A/B? I know the whole rom almost surely won't work for my radio, but can I at least be able to root it? I have a ROM and can extract the scatter file from there.
The procedure will work the same way yes. However you might need to connect your head unit to power after inserting the USB cable. Our software will however not work on your head unit.
My friend, I have the same problem, did you find a solution to it or not?
@@extrememod_ahu In this case, can I pass a new ROM, or should I exclusively restore the backup copy, and can I pass the ROM in testbunet mode
Hi, thanks for the tutorial. Would like to ask Doni need to turn on radio while connecting to PC via USB cable or it can vee turned off ?
Normally you only need to connect the USB cable when flashing via SP Flash Tool. Sometimes you need to connect the head unit to power after connecting the USB cable.
When running ADB, then you need to have you head unit powered on, booted and connected to your PC.
@@extrememod_ahu I did all steps carefully and before flashing software where i had to tick box BOOT, ANDROID, AND VENDOR i was missing VENDOR box there was only boot, android. so i flashed , but nothing happened, same soft appeared. aSorry for bad english.
@@andriusbns07 if VENDOR isn't present, you can simply skip it. As for the firmware, did you run a full factory reset after the installation?
@@extrememod_ahu yes i did full reset, but it seems that after flash without VENDOR my old soft was booted with my old files, not like in your post pictures. So it took time to flash , but it seems nothing was flashed , just old software booted.
@@andriusbns07 that has nothing to do with Vendor. Your had unit has flash protecton or you haven't fully installed the new firmware.
good tutorial, also make a tutorial for the Alwinner T3 chipset...
The only thing is confusing me is when should i have to power it while usb plugged in.
How do you get the boot1 file to create scatter file??
Please make a detail video step by step for a starter like me.
It's all in this video. Don't skip content, take the time to fully watch it. We are showing exactly how to create Boot1 and scatter files
Yt3560 2+32gb....
You can install it will flastool???
I can not do it??? You can help me
If you can't install SP Flash Tools successfully, you should probably not be messing around with your head unit.
comes up an error windows not regonizing usb any thoughts
Very good
I'm curious why some android headunits have am radio and most don't... Is that a hardware issue or something that can be turned on?
Well in this digital age it's all about Internet and DAB radio. Many of the manufacturers are focusing on that, by the looks of it
Hello friend, help me install the drivers, I already did the steps, my pc does not recognize the car radio. please help.
Sometimes you need to connect your head unit to power 5 seconds after inserting the USB cable. And then keep it connected to power until you see "OK" screen. Try that.
@@extrememod_ahu It does not always recognize, I try what you tell me, and the car radio does not recognize me, what other steps I can do or what windows I can format my pc, please help me.
@@josemanuelaguilarcondori3737 what kind of head unit is it? Do you have a link to the product?
You can also reach out to us on Facebook: facebook.com/extrememodandroidheadunits/
@@josemanuelaguilarcondori3737 i have the same problem,are you fix this promblem?
I never knew that someone will come up with such simple amd helpful tutorial ,thanks a lot... A couple of months took me to figure out all these flashing ,connecting with usb A to A cable,and all ,4pda is like an ocean of information. (9216ch) is im having all i want is to put Android 8 or 9 or 10 but im not finding any rom .. can you help me ..?
Thank you for your feedback. Why not try our custom firmware, provided your unit is currently on Android API 27. Link is in the description
When i try to download the 5pda file it only give me a bunch of option in Russian
This method is to recover a drive that turns on but does not boot the operating system? and it is also not possible to enter recovery mode?
This method teaches you how to create backup first and foremost
Hello
I appreciate the video very much.
I have an Android Q92-A2-CPL_00020_V001
Android os: 13 car audio F7.3.9 (x2)
can pro: V9.0.7 no canbus
ddr: 2g falsh: 32G
cpu: A7 1.5ghz x 4
mcu: 4.9 (x2)
Kerne:l 4.14.116 (Linaro)
Build: android-trunk-p0
I didn't want to remove the unit, so I disconnected the car battery and followed your instructions.
I tried both usb ports because I didn't know which one was the one with four pins.
Both attempts on each usb port, I did the Flash Tool Memory Test, Start.
Flash tool didn't respond and just sat there as if I hadn't installed the drivers or something.
Any ideas? I followed the instructions very carefully and I don't believe I missed a step as everything looked the same as the video and I'm using Windows 10.
I have Google searched extensively and can't find anything about a Q92 model.
Help would be very much appreciated
can you please suggest something about ts7 chips (topway) how backup and rom flash and with which softwares…
Topway TS7 units are completely different. They are based on UIS8141E chip and are not meant to be fiddled with. They are probably the least modifiable head units and are meant to be well-configured from the get-go. TS9 are a little bit better in that way.
@@extrememod_ahu you mean to say all topway series which i think is (t3,ts7,t5,t9) are in same class? we can not modify them like mediatek right? so should i forget about rom flashing of all this? or is there possibility of any?
@@rajuradios Topway head units are based on different chipsets but in general are much less modifiable than Mediatek. In fact, Mediatek is by far the most modifiable technology while being the cheapest one as well. Rockchip technology powered by MTCx MCU chips is a close runner-up as far as mods go.
Hey i haver ts10 brick logo Android i need iunstal flashtools How i do mynis this
TS10.1.2_20220514.130539_TW1-V2.
Wanna ask if i try to create all of this thing on stuck logo it will still work ??...sorry for my English
It will but it would be a pointless exercise as you'd have a backup of a faulty device.
I go Test mode and install driver like video. then install driver ( don't click delete the driver software.....) .press " start" and plug usb 4 pin also don't detect COM.
Make sure to restart the computer after installing the drivers. If this doesn't help, after inserting the USB cable, connect the unit to power - WITHOUT releasing the Test Point (you will probably need a second person to help you)
TS10.2.2
TS10.1.2
what is the difference between them?
When I got to the step of the scatter file and pluging in the USB to do the memory test.... It does nothing!!! What is the problem??? Thanks
Provided your drivers installed correctly and you aren't running Windows 11 - try to connect your unit to power, after inserting the USB cable. Then disconnect from power before removing the USB cable
Nice tutorial with good explanation. I have couple of questions.
1. Everytime when we take backup should I disconnect and reconnect and turn on the headunit?
Glad you liked it! Yes, you should remove the unit from power every time.
@@extrememod_ahu no need to turn on the headunit right...?
@@extrememod_ahu i am on windows 11 and followed your instructions on video to install drivers but head unit is not connecting when I insert the USB cable. What would be the issue?
@@carheadunit8061 no need. Only when procedure is completed
@@carheadunit8061 this won't work on Windows 11
Kak saya bisa gak mengubungi kak...kak saya bisa gak meminta da firmware nya kak dan alat tool nya berapa biaya nya kakak
thanx sir gooooooood job
Hello there good sir, is it possible to install Android OS on non android units like Alpine EX900 ? There are some that did it on UA-cam but they are on different country and they are charging big money for it , can you make a tutorial or let me know if it's possible?
It is NOT possible unless you do the necessary hardware modifications first. This is an extremely difficult task and makes little sense.
If you are worried about losing the sound quality by purchasing an Android Head Unit, get a head unit with digital sound output (make sure your aftermarket car amp has a Digital IN). Alternatively, you can order one of our custom-made units that will outperform anything currently available on the head unit market in the similar price range.
@@extrememod_ahu Thank you sir for you fast and elaborated answer
Anything if you don't hav3 Anything backet up. ?? Plz what can I doo trying to sort it for weeks now unfortunately no luck plz help if you can / know how or what to do plz any one ?
Thank you ❤❤
You need to have a professional to restore it for you if it's at all possible. We can give it a go if you are located in the UK or wish to send your unit to the UK.
@@extrememod_ahu I live in uk
@@extrememod_ahu can I have some contacts detail on you plz
@@MrDavidjacko please reach out to us through the website - extrememod.co.uk/contact-1 and we'll get back with the details. Cheers
after i install the mediatek drivers i will be able to connect the head unit on the pc and run the adb commands? this all i need and the driver version works on windows 11 ?
Windows 11 users are often experiencing issues with installing the drivers. We recommend Win7 or Win10.
Hi, i have 2 head units 8227l, one works and the other one have firmware problems, can i make a backup from the working one and flash it on the bad one?
Thanks in advance.
If they are identical, yes.
@@extrememod_ahu yes, they're identical, i'll give it a try
Thanks
Hi, my headunit version is ZXDZ_01, how to install firmware AC8227l/Ac8227L_demo? and How to install DSP? thanks
While the internal Mediatek chip is the same as in the YT92 units, the rest is different so this tutorial will only partially apply to your unit type. Unfortunately we can't provide more information at this time
Wish you had this for the Roco K706!
hello i have a problem with YT9216bj i have rom Кастом прошивка 9216v7.3 ver 4.0 от Stranger21ufa form 4pda. Few days a go i had a problem with GPS. Gps dont find satelites and a few days i cant turn on wifi bluetoth. I must few times reboot device to start the radio app and listen to the radio . It is a hardware problem because im flash lower ver. it was the same. Can je help me please or place here link other web side where it wsas dealt with? Thx
Did everything work with the stock firmware? If you had issues before flashing the custom firmware, then it's likely a hardware issue. You could try to update the MCU but it's a highly risky process and can brick your head unit beyond normal means of repair.
@@extrememod_ahu I am tested few firmware and its the same. And mcu ? I dowgrade to 3.5 update back to 4.0 and 4.6 without changes. Before and after flash modified firmware everythink was fine. I have this problem 1 week. I used modified firmware 2 months and everythink ok. Do you thing ist problem from MCU?
Great vid. I'm curious how you restore your backup if something went wrong?
We're making a video on that.
@@extrememod_ahu keep up the good work.
@@extrememod_ahu wheres the video at 🙂 im also in need to know how, and your instructions are by far the best explained, please make a video
can you help to find the stock rom of my astral head unit ?
Android: F9212B_00020_V001
Android os: Android 11.0
XY AUTO: F7.0 (X2)
CAN Pro: 9.0 (disconnect): no canbus
DDR: 2G
FLASH: 32G
cpu: A7 1.3GHz x 4
display: 1024*600
MCU: 4.0 (X2)
Help friend head unit flash wrong rom, but founded test point, but format flash show
''storage type mismatch"
scatter storage type is HW_STORAGE_EMMC
scatter storage type is HW_STORAGE_NAND
please help.
Try this video: ua-cam.com/video/yM1qTiXYHgg/v-deo.html
is it possible upgrade this model
YT9217B_00002_V004_20190728
kernel version
3.18.22
Yes it's possible
i want reinstal the Room Android 8127 from zero.
you have any video with this?
It's not the same on all these models. We're going to post a video later on how to restore backup, change firmware between different Android versions and updating current firmware to another one with same API level.
Hi how do i install my Rom user file?
hi i need your help my device with board 9260 v1.2 label 9218 dhj 2gb/16gb is in boot loop after wrong flash by usb android upgrade now i managed to connect as mediatek usb port after shorting test points but i dont have the stock rom every time i flash a preloader i get error 4034 or 5054 dram enable fail what should i do
Visit our XDA thread and install our software package. Not only will it restore your head unit but also make it pretty awesome: forum.xda-developers.com/t/guide-android-8-api27-supermod-for-yt9216bf-yt9216cfj-yt9216bj-yt9216bfj-yt9216cj-root-viper4android-twrp-custom-ui-brick-recovery-and-more.4318121/
But its for 9216 and mine is 9218dhj
@@scoroioneng ah my mistake. In this case you could reach out to us on Facebook for a more tailored advice: facebook.com/103272428807806/
awesome video. i've been looking for a way to flash stock android onto one of these head units (joying), is that even possible? if it is how?
With Joying probably no. You need one of those unbranded units unless someone has made a specific custom mod for your unit
@@extrememod_ahu thanks for the reply
Hey there, i am using 8227l 9216b unit when i choose system language other than english (i tried on turkish and deutsch) fm radio app crashes when i want to control with steering wheel control. Do you have any solution this ? I'm using your firmware package updated on september.
Did you install just the firmware or the whole software package?
@@extrememod_ahu whola package. TWRP, SU, BUSYBOX, Viper4Android etc.
@@gurkanyal in that case I don't know. The original RadioFM app has not been modified in any way.
@@extrememod_ahu When i bought unit brand new it has no rds fm radio app and it was working seamlessly do you have any apk's same radio but no rds ?
@@gurkanyal no we don't as the original apk was never modified. You should be able to find one at XDA forums however, or 4pda.ru forums.