How to Fix Pen/USB Flash Drive no Media 0 byte, Alcor Micro vendor USB
Вставка
- Опубліковано 23 сер 2024
- Today I will show you, How to Fix Pen/USB Flash Drive no Media 0 byte, Alcor Micro vendor USB.
In this video, I will show you ways you will solve the Flash/Pen drive showing no media 0 bytes | no media USB fix issue by upgrading its firmware. do this if you're facing no media 0-byte issue, for other problems like Pendrive showing within the disk management but not showing in my computer/ file explorer or insert disk watch my previous video-
"Pendrive not showing in my computer | Pendrive not detecting solution without the data loss."
Watch the video till the end very carefully to download and upgrade Pen Drive with appropriate firmware.
If you want to support me► bit.ly/3e6G0sg,
Please carefully Watch Complete this Video
Disclaimer This Channel doesn't Promote or encourage Any illegal activities that this provided all contents by This Channel are supposed for only Educational Purposes.
Copyright Disclaimer, Under Section 107 of the Copyright Act 1976, allowance that formed for "fair use" for purposes like criticism, comment, news reporting, teaching, scholarship, and research. Fair use may be an
employ permitted by copyright statutes that may rather be infringing. Non-profit, educational, or personal use tips the balance in favour of use.
======================================================
-----------------------Other Videos Link-----------------------
How to Remove Write Protection from USB/Flash Drive
• How to Remove Write Pr...
Flash/Pen drive showing no media 0 bytes | no media USB fix
• Flash/Pen drive showin...
How To Download UA-cam Full Playlist Videos
• How To Download YouTub...
Best Tricks To Make Speed up Windows 10, Fast Boot, and Fast Gaming
• Best Tricks To Make Sp...
======================================================
Subscribe to Our Channel: / ctfmentor
Subscribe to Our Other Channel: bit.ly/3r1VCTg
Facebook Page: / ctfmentor
Whatsapp: chat.whatsapp....
Instagram: / haris_0133
Instagram: / bashr_momen
Twitter: / haris0133
Facebook Group: / 638329947015934
Website: 7csoft.blogspo...
======================================================
Thank you For Watching my Video.
You Get Never Forget, or Video Like and Share, Subscribe And Press The Button of Bell Icon.
#Alcor_Micro_vendo
#flash_drive
#flash_disk
#no_media_pendrive_fix
#usb_no_media_fix
#CTFMentor
#HTAGraphics
#7Csoft
======================================================
🎵Music Credits:
I'm Not the Owner of Any Music, for all Credit Goes to Music Artists.
🔴I didn't create the music I can use in the video. All the credit goes to Music Creators.
******************************************************
Thanx bhai . Raat ke 11.46 ho gye kall se usb repair kr rhaa tha...lekin sab video bekar...ab is video ko try kia....bhai kaam kr gya method. usb drive sahi ho gyi.Thnku agian.👍👍👍
After watching so many videos on UA-cam I finally got my Pen Drive with this Video. Thank you very much 😢❤
You're welcome 😊
i am from tamilnadu in india my pendrive not working 6 months but today working for you thankyou so much bro thxxxxxxx
i am trying lets see
Yessssss!... I have watched some videos and webpages but none of them solved my USB problem but I got it here when I come from part one FirstChip... Even there was no block, no unplugging and no need of formatting to recover my USB. Thank you sir.
It says unknown in the controller part number of my usb drive. what should I do?
Great tutorial! Saved a pendrive!😁👏👏👏 Thank you and much more success there!😊🙏🤝👍
Its really working .... Thank u save my pendrive
Welcome 👍
oah thanks Man, you are Hero, i love playing with electronics i was trying to repair my spare USB since whole night, finally your video helped and i got a USB.
Thanks
subscribed
You are welcome
30400:unknown flash error, any clue?
Same bro 😢
You dowload wrong drive USB example :{6989SN-GTC/GTA/GTB...} or {6989 GTE ? Check the dowload list for supprot drive USB them
Thank you 💞.The only tutorial worked !!
You're welcome!
I have an error saying (20200:No support device mode error id: 00,00,00,00,00,00 ) what can i do ? My usb can be revived ? 😢
Try downloading the same version that was in the video.
Great video tutorial and very clear steps🙏👍
May I ask you though is it safe to turn off the windows virus protection before to proceed with file execution?
Since my Antivirus program detects a virus into the file and removes the .exe from my computer for safety reasons.
Thank you!
Yes 100%
The software contains malware/adware, as reported by other users too after they tried that software. I am skipping, too risky.
I was about to throw my pendrive but your video really did wonders and saved me from loss thanks brother❤
Glad I could help
Thanks a lot ❤ my usb drive is working right now
Great 👍
Thnx very much, it's work very well✔
Welcome
No flash in device error
how can i fix unknown control number or not view controller vendor or controller part number..how can i solve this problem sir??
Very powerful tutorial... i got my usb back
This is the second usb i am retrieving....
Si funciona, ahora el usb trabaja de fabrica sin problemas . te ganaste un sub y like
Bro and if disks says that it's write protected?
the alcor software dont detect the usb
Same problem
I accidentally deleted the original program. I tried what you showed and it didn't work, Could you help me from where to download the original. The data is this---
osb-Stick 128gb Medion
08/2016
MD 8
Article 94008
MSN 5005 4050
Thank you.
Sir after doing this usb is ok but not able to format usb and ask for format again and again ONLY format in ntfs quick and after re plug again ask for formaT
BUT FAT 32 NOT WORK
After watching this one issue is created that is error 30100: No flash in device error iD: 00,00,00 this issue face how to solve this problem
Download another version of alcor u2 mp , maybe one or two version older , it's going to work...
Thanks
I love you.
You got a new suscriber
😇
E quando não reconhece o pendrive o que faz ja baixei 3 versoes do alcor
Thank you man… Its actually working ❤️
Welcome 👍
@@CTFMentor mine is not working
Hi sir, is there away the flash drive can still save the files?
u are the best thanks
You're welcome!
After opening the folder 📁
I can't open flashlist.afl
It is showing that look for an app and in Microsoft Store
What to do
Thank you very much❤
Control or vendor unknow dikha raha hai
Did u get the solution bro?
In my case, it says
20200: No support device mode error
Bad Block: 0/0
What to do then??
Mine just says Alcor. Does this work on it too?
Great! It's works! Thanks!!
You're welcome!
@@CTFMentor I have a Question If i format that usb device again than. It's starting to show No media status.
Again the same steps follow
thanks so much my pendrive working
10000000000000000000% Working Bro Thanks 🔥
Si me sirvió 👌 Nice!!
Ayuda!!!
No support flash error: it's says, what should I do?
Please help me sir...!
Same here. Shows No support flash error. What shall I do next? Thank you!!!
Download same version from video
this worked for me but you will need to try difffernt versions of the software that matches your usb, it took me about 6 or 7 tries but i found on ethat worked
sure!
When I open alco micro, my pendrive did not appear, is it because I downloaded the wrong version of the program, or does my pendrive not have a solution anymore?
@@AnaClaudia-nc9wf it is because you have downloaded the wrong version
@@NurMohammad-ei6go what is the right version
bhai ek video skymedi usb pr bhi bna do....uska repair nhi ho rha.
What about if it shows 30400: unknown flash error?
Same error bro 😢
Great tutorial, however, is it possible to fix no flash in drive error thank you.
brother all process done...but just last step is not happening...when i unplug and replug usb its showing in my computer but computer got hang and not formating and i check in laptop too..same issue...
When you re-plug it then Try to format it with CMD.
Does this delete the files in pendrive
it has a error on me and wont let me click start
You Could Try Another One
There Are Many Versions of That Software
thanks man it worked
thank you very much
You are welcome
Too many bad block error :(
Thank you bro
it says unknown flash error when i enter micromp
It keeps showing me no flash on Device error id, please help ?
please someone help me, it shows an error "ddr: mode abnormal" please help 😭😭
hello, the start button is grayed out mine is alcor Lexar USB AU6989AN
Great tutorial!
What can i do when it doesnt let me start the process in alcorMP. My error is 30100: No flash in device error.
It's very important that existing data doesnt get damaged.
Use another port
I have a 32gb flash drive after I followed this video now it shows 58,2 gb ,how it this possible?????
COMO ELIJO QUE VERSION USAR
TENGO UN BLACKPCS DE 16GB ALCOR MICRO
trying your helpful tips but man i got this error, 30400: unknown flash error ID: FF,FF,FF,
someone has an idea to solve?
Same , did you got any other solution
and only Alcor?
Tengo el mismo problema pero con tarjeta sd dañada no hay medios
Thank you🙌
You're welcome 😊
no help, my usb flash drive is recognized as portable device, not even these apps can detect it
Its Worked...😍😍😍😍😍😍😍😍
Great
Alcor micro is no more
Why?
bro my pin drive is solid state system how can i fix?
Uuaauu Tic...Tac
😇😇😇
In chipgenius, If the section of controller Part-Number says: "unknown [FA00] - F/W 6B19". What should I do? 😢
Same problem you got any solution
My pen drive is2tb but show 14 gab how to solve it
my memory card has become RAW and its firmware blown off fully by some software virus i dont know how i am just learning how to repair physically memory card is new no trace of fault its all firmware somebody said we have to flash its firmware then it will work, now the point how to flash a memory card of sandisk with 8 gb is it possible, i think their must be some solution like this we cannot loose data and memory card both, it is game of some big multinational to destroy memory card and data both and forcing consumer to buy new memory card, their must be some solution i know deep minded people will find out....😮😮😮😮😢😢😢
Alcor software does not detect the usb, now what? What can it be? Was it already the flash drive?
Don't be surprised if you don't have administrator rights
Try again another software
Its working.✋❤
Great
Yar boos wind terbain lagao vilige me osum lge ga
30100 No flash in device error please help me
Controller part number unknown😅
Please anyone help me with this issue🙏
Do u know where to fix alcor AU6366/AU6371
Chipyc2019 no flash file sir help me
Software not detect usb
try another vender for use
Alcor micro au6989 link plz
it's not showing up in the system helppppp
alcoremp not showing anithing pls help
it says too many badlock errors
my vendor showing unknown, my memory card is sandisk...😮😮😮😮😢😢😢😢
im always getting Flash_Name: NO_FLASH error
30400 unknown flash error I'd 2c 01 02 03 04 00
Sir ye show kar Raha hai Kya karu start ka option alow nahi karta plz help me
thanks bro
Happy to help
It will Work on my Memory CARD?
Yes
@@CTFMentorbro
I need this 😭😭😭
Who know how to fix "40100: Miss bin file error Bad Block: 0/11152"
It is showing
30100 : No flash in device error
ID : FF,FF,FF,FF,FF,FF
What to do
Try again, after truing off your antivirus or windows defender.
No Support device mode error is showing what i do..?? plz. HELP
I have the exact error with a Dell Recovery drive
Download same version from video
Error code 19
Bro In Software It Was Showing (K:) Drive But In My Computer Why It Was Showing (H:) Drive
compare the disk space of the both drives then find the original one but be careful while choosing.
please help for sss 6801
THIS is right
bro it worked but my usb was 16 gb and now its only showing 8 gb
Lol my 32gb became 7.47gb 🥹🥹
30100 ERROR
Nope didn't work for me cause this is what i have ( unknown flash error )
I tired this method many time
But it's fail and cross 65%
I am unlucky
Not starting the scan
Is there any error? or DM me on Instagram
If loading fails what to do?
Use different port
@@CTFMentor i think the loading has been completed now but whenever I connect usb to pc then the pc starts to hang and I cant format it
@@CTFMentor can I have your best Email?