Note; this is video applies for an automatic transmission, just so you don’t see that sensor for a manual transmission it’s actually on the clutch pedal, that solved my issue thank you sir! Also that sensor if it’s out of place the engine brake doesn’t work along with the cruise control
This helped me out figure out same issue but I have different problem. My break pedal is loose and so it stays down to much so spring has no action that the break is depressed. How do i tighten the break pedal so it stays up and doesn’t have to much free play?
I’m little confused. Are you testing the PTO or the cruise control? I know the CC will not come on unless you got above 30mph…? I’m not sure what you trying to do here. Please help explain in this comment because I’m having issues with my CC but not my PTO.
The cruise control wasn't working and this brake pedal switch was the problem, the spring jumped under the brake pedal and the ecu always were receiving the information that brake pedal is applied even if it was released and cruise wasn't working!
У меня проблема с круизом только на парковке , когда едешь все работает , когда надо холостые поднять на запаркованом , не работает , есть идеи ? (Пружинка и сам переключатель работают- проверял).
Could this possibly be connected with my problem of losing response to throttle? Sometimes I lose acceleration and my engine brake, after about 20 seconds truck will return to normal.
VERY HELPFUL MAN , JUST FIXED MINES, I HAD THOUCH THAT LITTLE SPRING AND MOVE IT, I PUT IT THE WAY IT WAS AND IT STATED WORKING RIGHT AWAY
Thank you ...you are awesome.. just fixed after 500 miles 😀 but now works...
Thank you so much 👍🏻
You welcome Sir!
Note; this is video applies for an automatic transmission, just so you don’t see that sensor for a manual transmission it’s actually on the clutch pedal, that solved my issue thank you sir! Also that sensor if it’s out of place the engine brake doesn’t work along with the cruise control
Yes you are right! Thanks for the note and glad you fixed the problem! 💪🏼
I just fixed mine by watching your video
Thank you so much
You welcome!
Found my spring just like that, managed to fix it without removing the panels. Thanks for the video.
You welcome!
Thanks bro I just checked that and that is my problem now I would like to replace the switch on the break
Thank you. Video helps. After change metal cabel for steering wheel ajustment i got same problem.
Looking forward to more content on volvos
You’re the only one to say that. Thx
You the best Valera..
Thanks!
Very helpful thanks!
Very helpful video 🤙🏾🤙🏾
Very helpful! This just helped me
This absolutely worked.
You welcome!
❤❤❤ Thank you Man ♥️♥️
You welcome!
Bro Thank you so much you saved 🙏
This helped me out figure out same issue but I have different problem. My break pedal is loose and so it stays down to much so spring has no action that the break is depressed. How do i tighten the break pedal so it stays up and doesn’t have to much free play?
Thank you for the video i fixed 👍
You welcome! I am glad it was helpful!
Great work 👍🏼
My 2016 vnl adaptive cruise will engage and disengage but often times vec sensor abs/tcs lights come on
Did you ever fix this issue I have same problem
Great job!
Thanks!
Thank you so much.
You welcome!
Good fix
Thank you so much 🙏
You welcome!
Brother where’s is your shop located? Im in tacoma and need some job. Thank you
Valeriu! My cruise control stop working after changing pass through on d13 can you tell me which sensor controls cruise please !?
It happen to me to thanks bro
Appreciate!
You welcome!
I’m little confused. Are you testing the PTO or the cruise control? I know the CC will not come on unless you got above 30mph…? I’m not sure what you trying to do here. Please help explain in this comment because I’m having issues with my CC but not my PTO.
The cruise control wasn't working and this brake pedal switch was the problem, the spring jumped under the brake pedal and the ecu always were receiving the information that brake pedal is applied even if it was released and cruise wasn't working!
I was thinking same thing
I'm having the same problem my CC is the one that doesn't work have y fix yours?
У меня проблема с круизом только на парковке , когда едешь все работает , когда надо холостые поднять на запаркованом , не работает , есть идеи ? (Пружинка и сам переключатель работают- проверял).
Connect the computer and check if its not deactivated!
What about for a Manuel ? I don’t see the switch
Could this possibly be connected with my problem of losing response to throttle? Sometimes I lose acceleration and my engine brake, after about 20 seconds truck will return to normal.
I don't think it is related to loosing response from throttle!
Will this affect the jake break as well ?
Hllo where u located ?
Shop?
What if
Nie ma tego