SF is calculated during the Setup--requires a State Plane or Coord system attached to Job under Job Properties, and based on the starting coordinate of the setup up point . SF is computed , then all the data in the job will be based on Grid system of the selected Coord system. If coordinate system set to "none" then working on Surface (ground)
@@JeffRyallG4GR So as I understand if we alredy applied a coordinate system along with scale factor to the job then we picked the Current setup we will produce new control within the job defiend coordinate system and will be having the same scale factor that the job we are working with has. Right?
Thank you Jeff! How does one generate the traverse report file? It sounds like Leica does not provide a "default template" for that report file... why do you suppose that is? Is it just to make us have to buy Infinity? Can I create a traverse report file using NotePad? If I know of other surveyors running a CS20 with Captivate... can their file be used in my collector? thank you again for this demonstration. My dealer was not able to show me the Traverse application in full.
If you download to Infinity- the reporting is great so that is an option. I would strongly recommend Infinity for any one running RTK or TPS especially when traversing, will need the TPS option. The older Format files allow you to export information, these can be downloaded from My world, if you email me i can send some over- also can ask Leica support 800-327-4773 to help or your local dealer should be able to help. Also on CS20 if you go to Job-Export Dat, then export a Rw5, will have all the raw info from traverse. So several options
Here is a link to Some useful Format files, if you put on SD card under CONVERT subdirectory then you can upload, important to attached Format file before starting Traverse to record. There is a "1200Appl" format file or "TPS Traverse" both should work fine, the "1200appl" format file is a great default one to use in all applications. drive.google.com/drive/folders/1YVPYq_ohauSiy0Xy77ZzcwPppv5PripN?usp=drive_link
Here is a link to Some useful Format files, if you put on SD card under CONVERT subdirectory then you can upload, important to attached Format file before starting Traverse to record. There is a "1200Appl" format file or "TPS Traverse" both should work fine, the "1200appl" format file is a great default one to use in all applications. drive.google.com/drive/folders/1YVPYq_ohauSiy0Xy77ZzcwPppv5PripN?usp=drive_link
If you watch video 3 you can adjust the traverse in field, and store to a new job with new point ID- to preserve the original job and traverse data . This original job can then also be imported into Infinity office Software to be adjusted using Infinity SW
Great job
I am confused with the scale factor. When you pick the Current setup option, is it calculated from your traverse? at the end?
SF is calculated during the Setup--requires a State Plane or Coord system attached to Job under Job Properties, and based on the starting coordinate of the setup up point . SF is computed , then all the data in the job will be based on Grid system of the selected Coord system. If coordinate system set to "none" then working on Surface (ground)
@@JeffRyallG4GR So as I understand if we alredy applied a coordinate system along with scale factor to the job then we picked the Current setup we will produce new control within the job defiend coordinate system and will be having the same scale factor that the job we are working with has. Right?
Thank you Jeff! How does one generate the traverse report file? It sounds like Leica does not provide a "default template" for that report file... why do you suppose that is? Is it just to make us have to buy Infinity? Can I create a traverse report file using NotePad? If I know of other surveyors running a CS20 with Captivate... can their file be used in my collector?
thank you again for this demonstration. My dealer was not able to show me the Traverse application in full.
If you download to Infinity- the reporting is great so that is an option. I would strongly recommend Infinity for any one running RTK or TPS especially when traversing, will need the TPS option. The older Format files allow you to export information, these can be downloaded from My world, if you email me i can send some over- also can ask Leica support 800-327-4773 to help or your local dealer should be able to help. Also on CS20 if you go to Job-Export Dat, then export a Rw5, will have all the raw info from traverse. So several options
Here is a link to Some useful Format files, if you put on SD card under CONVERT subdirectory then you can upload, important to attached Format file before starting Traverse to record. There is a "1200Appl" format file or "TPS Traverse" both should work fine, the "1200appl" format file is a great default one to use in all applications.
drive.google.com/drive/folders/1YVPYq_ohauSiy0Xy77ZzcwPppv5PripN?usp=drive_link
Hello Jeff ,
How can i get the Sheet Report for the Traverse ?
i would appreciate your help
Here is a link to Some useful Format files, if you put on SD card under CONVERT subdirectory then you can upload, important to attached Format file before starting Traverse to record. There is a "1200Appl" format file or "TPS Traverse" both should work fine, the "1200appl" format file is a great default one to use in all applications.
drive.google.com/drive/folders/1YVPYq_ohauSiy0Xy77ZzcwPppv5PripN?usp=drive_link
Can you re enter the original pre adjusted traverse file once its adjusted?
If you watch video 3 you can adjust the traverse in field, and store to a new job with new point ID- to preserve the original job and traverse data . This original job can then also be imported into Infinity office Software to be adjusted using Infinity SW