This was very helpful, thank you. Pre-drilling pilot holes is a good idea. It is possible for 1 person using a manual screwdriver to assemble this (I did) but 2 people + a cordless screwdriver would certainly help. Fitting the back of the box is certainly the hardest part. I have to ask, why does one arrow on the inside of the back piece point down whilst the arrow on the outside of it point up?
@@donkeymagick I've just tried to assemble this item and hit this problem. It would have been very helpful if Keter had predrilled these holes since doing it yourself risks out of alignment etc if you get it wrong. very disappointed in the quality of the instructions here - they could have added that step in the paper instructions or the video.
Been trying to put this item together for most of the morning. Very little progress not helped by fairly unclear instructions. Big question. Is the metal bar at the top of the back panel supposed to be wider than the back panel? Some people have commented below but without any clear answer. Are you supposed to fit it even though it's wider? I rang their 'helpline' which was pretty useless TBH.
Good video, the written instructions were a bit vague for joining of the rear panel and very easy to mis-assemble it, the up -down arrows on the back panel are also confusing. There should be proper pilot holes as well, as it is difficult to screw in the self tappers.... Many Thanks
I've just assembled this myself (57 year old female) and it took around 3 hours single handedly. The video helped enormously but like others have said, pre-drilling holes helps.
The Store It Out Max is designed for storage purposes only and not to house electrical items so we wouldn't recommend storing a washing machine and dryer in here. For information, the internal size is H 110 x W 132 x D 76cm.
My lid keeps popping off at the back on the right hand side. I continually have to put it back in place. I have loosened the metal lid supports but it still happens and is not currently fit for purpose. Any ideas on how to remedy this?
I just put together this shed. When you’re screwing in the back the tabs aren’t long enough and the screw hits the edge. Slant the screw to the outside for a more secure attachment. The hinge base is not like in the video. The strut is in between the screw holes. The plastic is pretty brittle and thin.
Use a small drill bit to pre drill holes, especially for the back. It somewhat boggles my mind they didn't do this for you for the back of the unit. Rather lazy manufacturing and makes it a two person job UNLESS you pre-drill the holes OR manually do the screws, which is hard work. Imagine if IKEA did that? What should be a simple assembly made 10 times harder by this omission. Was a PITA quite frankly.
just about to assembly and the (no 2) wlpm x 2 plus the 5 screws the WLpm where the screws go the holes are their but the plastic covers the hole as well, are you supposed to drill through them ????
I personally found the second stage of putting together the two big black panels the hardest… and it’s not very clear and quite confusing! However love this video, very calming and great music! Not to mention the acting
hey i stupidly put the door hinges in before attaching them to the door. tried to take them out but cant seem to do it. broke one in the process. any tips on getting them out?
I brought this it came today was a nightmare putting together nothing fits properly and massive gaps everywhere definitely not fit for what I needed to store when it rains
Thank you so much for this video. I didn't have instructions but managed to work out everything apart from the rear, it just wouldn't go together. I didn't know the metal bit had to be removed! Only one mild criticism; You don't clearly show which way around the metal bit goes. It isn't difficult for me to work out but some people may struggle for a bit if they have it the wrong way around. I managed to bend a hinge that was lining up properly. May have weakened the metal because it doesn't close flush, so I hope spare parts are available? My eighty year old dad also bought one of these, and managed to assemble it by himself! Shows how simple it is with instructions. I do have thirteen screws left over... Can't see where they go.
The only minor issue I/we encountered was that I didn't realize one of the two back panels has to be turned around in order to allow both panels to interlock and be a large flat back panel before screwing them together. All in all it was about a 2 1/2 hr. job for the two of us, a cordless drill driver and laptop to follow this video while assembling.
Purchased one and it arrived today and the hinge on the right door was completely snapped off not very happy tbh hopefully they will send me a replacement right door
You also have the option to return the item to your retailer for a replacement if you'd prefer. We are currently experiencing some delays with replacement parts for the Store It Out Max but the team will get one out to you as soon as they can.
I've pushed the hinge in and door come off and so now I can't get hinge out to put door back on? Any help of how to remove hinge as it seems fixed now?
@@SugraBeghum this is a real concern as I can buy a second hand one that’s already assembled but can I take it apart to load into my suv there seems to be a problem doing this?
@hemtet5500 u can take everything apart easily except, the two walls on the sides that are securely clipped into the base or floor of shed, I barely got that shed out into my garden from living room even with the two walls clipped on, I was even thinking about sewing it in half and gluing it back together lmafooo
I've encountered a big problem- when clicking the door into place the bottom jumped off the peg. I'm now trying to remove the clicked in fitting without breaking it so I complete the construction of the box. Any one with a solution? Help!
I have assembled this box till you add the doors in. I have put the small plastic fitting in the side panel without adding the door in. How would I removed this?
You would need to unattach the hinge at the top by pulling this out of the side panel. These click into place so you may need to use a flat sided tool to help bring them out gently.
I wish I had seen this video before attempting to put ours together. One of the doors ended up on the wrong side and now I can't get it off again. Any ideas for its' easy removal please?
Every screw becomes harder to install than the previous screw. Pilot holes or no pilot holes, the screws going in is an absolute joke. Just don’t budge whatsoever
Your products are terrible quality. The plastic panels come warped and the “click together” joints have plastic left in the holes where the moulding process has not worked properly. Have exchanged item and same problem. Quick google search shows this is very common with Keter.
Sorry to hear about this, it's not the quality we would expect. Please contact our customer services team so they can look into this for you. The email is csuk@keter.com
Hi! I’ve emailed y’all because Argos sent me this and the wrong back pieces came with it and I was hoping y’all could send me the right pieces because Argos doesn’t have any replacements! In the meantime I’m trying to disassemble what I already did but I’m really struggling to get the side walls out of the floor. I see the two clips at the front edge which I can just about push in but it still won’t come out. What am I missing? Thanks!
This product is causing me a lot of problems when trying to put the back in place. When I get one side right the other side will be out and vica versa. It just doesn't all seem to want to slot in together at the same time. For this reason I couldn't recommend the product.
@@pmyzjc Yeh it seemed that way to me too but I think it might be coz the holes in the brace are not in exactly the right place. It went together eventually but just not perfectly at the top. The main thing is it all works and remains dry inside.
Thank you for this upload , so much better seeing it done than reading instructions .
Thank you it's really helpful. Lol I got my wife to help after I showed her this video,I said you need a women to help like in the clip❤
Thanks for this, manged to set it up on my own
Great to hear!
How did you set it up on your own if you watches this video? Lol only joking
Great Job - well done, made it very easy. Can't believe I am a doppelganger for the guy.
Glad it helped!
This was very helpful, thank you. Pre-drilling pilot holes is a good idea. It is possible for 1 person using a manual screwdriver to assemble this (I did) but 2 people + a cordless screwdriver would certainly help. Fitting the back of the box is certainly the hardest part. I have to ask, why does one arrow on the inside of the back piece point down whilst the arrow on the outside of it point up?
@@deryckthake yeah friggen blisters ya hands though i done mine with screwy tooo
I can assure you the screws don't go in that easy. Everyone was a struggle but it's finally up.
Glad you've assembled it. Sometimes it helps to pre drill the pilot holes to help the screws go in more easily.
I wish Keter would pre-drill the pilot holes... 🤦🏻♂️
@@donkeymagick I've just tried to assemble this item and hit this problem. It would have been very helpful if Keter had predrilled these holes since doing it yourself risks out of alignment etc if you get it wrong. very disappointed in the quality of the instructions here - they could have added that step in the paper instructions or the video.
Been trying to put this item together for most of the morning. Very little progress not helped by fairly unclear instructions. Big question. Is the metal bar at the top of the back panel supposed to be wider than the back panel? Some people have commented below but without any clear answer. Are you supposed to fit it even though it's wider? I rang their 'helpline' which was pretty useless TBH.
Good video, the written instructions were a bit vague for joining of the rear panel and very easy to mis-assemble it, the up -down arrows on the back panel are also confusing. There should be proper pilot holes as well, as it is difficult to screw in the self tappers.... Many Thanks
Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?
Are these easy to disassemble with the clicking parts?
Do you drill this to ground?
The metal support bar is too long (wider than the back panel by 10mm). Can you send me one that fits? Thanks
I've just assembled this myself (57 year old female) and it took around 3 hours single handedly. The video helped enormously but like others have said, pre-drilling holes helps.
thanks! Your comment helps me to feel more confident to go install this by myself for our renters.
Thanks for that mines just been delivered i dont want it now 😂😂😂 thought it would just click in place as its for outside lol😊
Same lol nightmare
@@weazel583 wasnt that bad just i xidnt use a drill had do it manually lol
Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?
looking good
Thank you for your comment.
Can I get a washing machine and dryer next to each other? Is it large enough?
The Store It Out Max is designed for storage purposes only and not to house electrical items so we wouldn't recommend storing a washing machine and dryer in here. For information, the internal size is H 110 x W 132 x D 76cm.
You do need to do pilot holes and then it's piece of cake
I've just assembled this on my own, at 21:00pm at night in the dark and this video was perfect. Thank you most kindly
That's great to hear, well done!
that's what we did except we stopped halfway because of the noise XD did not want to piss the neighbours off!! XD
Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?
Why is this still being sold with the metal bar too long?! 😠
Can't build it, and now i can't take the sides off to send back! 🙄
Thats what i have just found. Metal bar too long....
My lid keeps popping off at the back on the right hand side. I continually have to put it back in place. I have loosened the metal lid supports but it still happens and is not currently fit for purpose. Any ideas on how to remedy this?
Who didn’t take the bar out first 😂
Me
I just put together this shed. When you’re screwing in the back the tabs aren’t long enough and the screw hits the edge. Slant the screw to the outside for a more secure attachment.
The hinge base is not like in the video. The strut is in between the screw holes. The plastic is pretty brittle and thin.
Use a small drill bit to pre drill holes, especially for the back. It somewhat boggles my mind they didn't do this for you for the back of the unit. Rather lazy manufacturing and makes it a two person job UNLESS you pre-drill the holes OR manually do the screws, which is hard work. Imagine if IKEA did that? What should be a simple assembly made 10 times harder by this omission. Was a PITA quite frankly.
I'm interested in getting one of these but not for dust bins, can a bicycle fit in it?
just about to assembly and the (no 2) wlpm x 2 plus the 5 screws the WLpm where the screws go the holes are their but the plastic covers the hole as well, are you supposed to drill through them ????
Are you referring to the Store It Out Max? Generally there are pilot holes where the screws are meant to go, so it's easy to drill them in.
I personally found the second stage of putting together the two big black panels the hardest… and it’s not very clear and quite confusing! However love this video, very calming and great music! Not to mention the acting
Thanks for your feedback, we're glad the video was helpful for you.
I am currently stuck on this step and about to give up. It’s not clear at all and I have arthritis and really struggling as to what to do
Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?
hey i stupidly put the door hinges in before attaching them to the door. tried to take them out but cant seem to do it. broke one in the process. any tips on getting them out?
To remove the hinges, you'd have to gently prise them out with a flat sided tool.
I brought this it came today was a nightmare putting together nothing fits properly and massive gaps everywhere definitely not fit for what I needed to store when it rains
2 boxes broken gonna try & make 1 box 👍here goes,know how but from a wheelchair hmmmm
Thank you so much for this video. I didn't have instructions but managed to work out everything apart from the rear, it just wouldn't go together. I didn't know the metal bit had to be removed! Only one mild criticism; You don't clearly show which way around the metal bit goes. It isn't difficult for me to work out but some people may struggle for a bit if they have it the wrong way around. I managed to bend a hinge that was lining up properly. May have weakened the metal because it doesn't close flush, so I hope spare parts are available?
My eighty year old dad also bought one of these, and managed to assemble it by himself! Shows how simple it is with instructions.
I do have thirteen screws left over... Can't see where they go.
Thanks for your feedback. Glad you found it useful. If you find you need any spare parts, you can contact our team on csuk@keter.com
@@keteruk8879 thank you :-)
Super easy and the kit is as described in this video. Well done Keter, I would by your products over others if this is the norm.
This video was a HUGE help because my max it out did not come with any instructions! thanks
The only minor issue I/we encountered was that I didn't realize one of the two back panels has to be turned around in order to allow both panels to interlock and be a large flat back panel before screwing them together. All in all it was about a 2 1/2 hr. job for the two of us, a cordless drill driver and laptop to follow this video while assembling.
Worked perfectly!
Anyone else's not match up with what they got in the box? Mine completely different?
Purchased one and it arrived today and the hinge on the right door was completely snapped off not very happy tbh hopefully they will send me a replacement right door
You also have the option to return the item to your retailer for a replacement if you'd prefer. We are currently experiencing some delays with replacement parts for the Store It Out Max but the team will get one out to you as soon as they can.
@@keteruk8879 no point returning the full thing when it's just a replacement door sent you guys an email last night but haven't had a reply yet
You change the patern of this one? My don't have the same back walls for example. I don't have instruction manual ether in the cartoon.
If I put wooden shelves on it, how many pounds or kilos can it support?
This was very helpful thanks 😃
Just one mistake n I am ruined I clicked in the door hinge in first now don't know what to do
Dude mine doesn’t have them brackets for the doors…..
Is the store it out max ventilated, concerned about condensation. Also would I fit a 20” wheeled folding bike in there?
This video is a huge help! Thank you
That's great to hear!
Also I was not going to install this beside a wall but as a freestanding shed. Anything I can do to make sure it does not blow over in a storm
I wish I watched this first! Messed up the door hinges! 🤦♀️🤣
Does anyone know how to UNASSEMBLE it. Im moving and struggling to take off the side panels
Did you work out how to? I’m struggling to do mine as I type
I've pushed the hinge in and door come off and so now I can't get hinge out to put door back on? Any help of how to remove hinge as it seems fixed now?
May I know how to disassemble the keter?
Can you unclick the sides for disassembly if needed thanks
I assembled this in my living room, everything disassembled except from the sides lmfao now its stuck
@@SugraBeghum this is a real concern as I can buy a second hand one that’s already assembled but can I take it apart to load into my suv there seems to be a problem doing this?
@hemtet5500 u can take everything apart easily except, the two walls on the sides that are securely clipped into the base or floor of shed, I barely got that shed out into my garden from living room even with the two walls clipped on, I was even thinking about sewing it in half and gluing it back together lmafooo
@@hemtet5500 how big is ur suv? Model?
@@SugraBeghum cr-v mk2 Honda
Thank you for this really useful video, it made putting the storage box together much easier.
Ok I own this kit and it does not
Look easy at all
I’ve put the door on the wrong way in my box can I I clip the hinge piece ? I’ve tried so hard to pull it out but it won’t come out
What did you do to fix it please? Been in same position and would appreciate help
Can someone please tell me what screws these are please?
Do you need to put it on the patio pavers or can you put it on gravel?
How many boxes is it delivered in
has anyone tried to dismantle this shed to move.
I've encountered a big problem- when clicking the door into place the bottom jumped off the peg. I'm now trying to remove the clicked in fitting without breaking it so I complete the construction of the box. Any one with a solution? Help!
I’m having this same issue now. Did you solve it?
Unfortunately no, no one has got back to me either with any advice. I'm not a happy customer! @@conorcallanan3255
How to remove sides from basr
Great video we did it in about 2.5hrs as started wrong then found the video very easy to follow thanks
Hii, when I’m putting my metal rod on top, the walls move and then they do not go in fully, was that the case with you too?
I have assembled this box till you add the doors in. I have put the small plastic fitting in the side panel without adding the door in. How would I removed this?
Ive got the same issue. Did u sort ut?
What model is this please?
Please could you do the same video but for the Store It Out Ace?
What is the inside width in inches ????
Plastic junk
I don’t get it. The pistons I got are different than the ones that are supposedly supplied. Don’t line up the same either..
Thanks for the feedback. If you're having issues with your assembly or need replacement parts, you can get in touch with our team on csuk@keter.com
Many thanks 🙏💕
Thank you for a video very helpful 😅
I’ve put the doors on the wrong way lol. Anyway to take them off?
You would need to unattach the hinge at the top by pulling this out of the side panel. These click into place so you may need to use a flat sided tool to help bring them out gently.
did you managed to get them off because i put the clips in first and can’t fit them on?
@@twogamers6851 I managed to do the same and was unable to get them off
@@keteruk8879 hi, is there any instructions how to dismantle?
@@twogamers6851 yes with sheer muscle lol sorry for late repky but did take 2 people
Can you secure it to the concrete pad so it doesn’t blow away?
Yes- it can be secured. There are holes located on the base that can be used to secure the unit although fittings are not included.
Help…. I mess up with the doors!!!!! I clicked up & the bottom it wasn’t in ….. please help what can I do to unclicked?????
Hello, you can gently prise the part you clicked in with a flat sided tool. This should enable you to reassemble the doors correctly.
@@keteruk8879 thanks sort it!!!!!! 👍
@@claudiagilhespy5180 hi did you manage to get it out? im struggling :(
YES 👍 👍👍
@@narmmm Yes … thanks for the video 👍
Nice music 👍🏽
Aighhhtt I’m about to put 3 of these suckers all by myself. Thanks for the video
Glad it helped, hope you got all 3 sorted.
@@keteruk8879 yes, very easy!!! Took about 30 mins+ each for me
Can it stay still in windy conditions?
With some heavy ish stuff in it won't blow away.
pile of rubbish i did all the steps and there was m massive gap in the lid the metal bar that was supplied was way to long also for some reason
Thanks for the feedback. If you're having issues with your assembly or need replacement parts, you can get in touch with our team on csuk@keter.com
Thank you
I wish I had seen this video before attempting to put ours together. One of the doors ended up on the wrong side and now I can't get it off again. Any ideas for its' easy removal please?
Hammer
Wrench
Bunsen burner
Did you manage to solve it. I made the same errror
wow...this made the assembly so easy...
Great to hear, thanks for your feedback.
Is it possible to disassemble again once put together?
Nope!
i did
How?! @@rickmartindale8443
Every screw becomes harder to install than the previous screw. Pilot holes or no pilot holes, the screws going in is an absolute joke. Just don’t budge whatsoever
Sorry to hear you're struggling with this. It can help to pre-drill the pilot holes before adding in the screws.
@@keteruk8879 I did drill pilot holes! Just seemed to get tighter and tighter! I managed in the end and it’s a great bit of kit! Thank you!
Your products are terrible quality. The plastic panels come warped and the “click together” joints have plastic left in the holes where the moulding process has not worked properly. Have exchanged item and same problem. Quick google search shows this is very common with Keter.
Sorry to hear about this, it's not the quality we would expect. Please contact our customer services team so they can look into this for you. The email is csuk@keter.com
I did it with the Woodglut plans.
Hi! I’ve emailed y’all because Argos sent me this and the wrong back pieces came with it and I was hoping y’all could send me the right pieces because Argos doesn’t have any replacements!
In the meantime I’m trying to disassemble what I already did but I’m really struggling to get the side walls out of the floor. I see the two clips at the front edge which I can just about push in but it still won’t come out. What am I missing?
Thanks!
Hello, to remove the walls from the floor, we'd suggest using a flat sided tool to gently prise out the sides.
This product is causing me a lot of problems when trying to put the back in place. When I get one side right the other side will be out and vica versa. It just doesn't all seem to want to slot in together at the same time. For this reason I couldn't recommend the product.
I’m having the same problem. The metal brace at the top just seems too long!
@@pmyzjc Yeh it seemed that way to me too but I think it might be coz the holes in the brace are not in exactly the right place. It went together eventually but just not perfectly at the top. The main thing is it all works and remains dry inside.
@@pmyzjcomg me too, did u sort this