Flashing ESP Home on SonOff TX Ultimate Touch Switch in Home Assistant

In this video, Sonoff TX Ultimate Touch switch is flashed with ESP Home in Home Assistant to make it work locally. Also all the features of the touch switches is explained with the real time use cases.
All the automation rules are created using NODERED.
For Smart Home Solution Contact :
R. Yogeshwaran
TECHIERAT AUTOMATION
[phone]
product link:
itead.cc/product/sonoff-tx-ul...
10% Coupon : TECHERATSONOFF
TUTORIAL LINK :
• SONOFF TX Ultimate end...
github.com/SmartHome-yourself...
Chapters
0:00 Start
1:04 Overview Of Options avalable after Flashing ESP Home
1:58 Explaining Control Options One by One
3:16 Explaining Binary Sensor - Long Press
3:36 Explaining Binary Sensor - Multi Touch
3:46 Explaining Binary Sensor - Swipe Left and Swipe Right
4:05 Explaing Touch Field one, Touch Field 2 and Touch Field 3
4:18 Explaining Night Mode
5:11 Touch Action Light colour
6:00 Installing ESP Home in Home Assistant
6:52 Creating Initial File in ESP Home to Flash in touch panel
7:53 Opening Back panel of the touch switch
10:10 Explaining TX RX 3V GND and Boot Pin Required for flashing
10:45 Preparing for Installation
11:52 ESP Home Installation Procedure
13:57 Update the reruired files and OTA Install
18:59 Features demo using Node RED
19:15 Node-RED Automation For Swipe Right to Left
20:41 Node-RED Automation For Swipe Left to Right
21:35 Real Time Demo of SWipe Right to Left and Swipe Left to Right
22:35 Node-RED Automation For Touch Field 1, Touch Field 2, Touch Field 3 and Multi Touch
24:38 Real Time Demo of Touch Field 1, Touch Field 2,Touch Fieled 3 and Multi Touch
25:50 Node-RED Automation For Long Press Action
29:00 EXplaing Relays L1 L2 and L3
30:49 Final Thansk

[@Smarthomeyourself]

;) Thx for reviewing my component.
I've fixed the audio yesterday and added an alternative configuration for covers.

[@TechieRat_Automation]

Thank you very much sir…👍

[@ginopiervincenzi9751]

Top ❤

[@TechieRat_Automation]

Thank you..

[@rahul4u2k3]

Hi , i have bought tx ultimate switch but never flashed any esp32 device so can u tell me which cable have u used to flashed it and where i can buy it

[@nitin45456]

Hello, I want to configure 86 EU type 4 gang. Can you please help me with that?

[@TechieRat_Automation]

How may I help u?

[@jagadeeshv2763]

how to integrate atomberg Fan in home assistant

[@TechieRat_Automation]

Have to use Ir blaster fan

[@balakrishnanv26]

what smart switch module are you using?

[@TechieRat_Automation]

Sonoff

[@tedev]

the video of showing the cable connection with the usb to serial should be better and the fact that you changed the cables in the middle killed me. also it would be nice if you could show the info inside the node red.
do you know how we can enable the led color to be activated on the top of the switch as well when the relay is on? right now it only shows as the bottom

[@TechieRat_Automation]

I will check it out and let u know..

[@00_Hunter_00]

Working for 120 US version?

[@TechieRat_Automation]

Yes.. it will