Hey I have the same car 3.5 just replaced the fuse box because the low speed fan wasn’t working worked for a couple weeks then it stopped again do u know what could be the issue I got new cooling fans , new harness , new connections ,
Hey bud check the harness for power while the car is running if you’re comfortable doing so. If you can go to your local parts store and get a test light it’s pretty cheap and a good investment always start there. If you have power and still no signal you may have an issue in the pcm highly doubt that though.
@@CoachKFixeditTv yes I even changed the high one and low one because the high one still works so I switched it around to see if the low one would work and nope same result the high one only works
dont understand how much i appreciate you for telling me to take that solid line off to put it in saved me too much anger
How did you replace the harness? I can't find a video anywhere.
My driver side cooling fan not coming on, I replaced the relay in the fuse box and it’s still not turning , what should I do
Do you have any access to any diagnostics tools ?
Try changing the blower motor resistor bro I found a video on here and did it myself. If not that it could be the actuators
Hey I have the same car 3.5 just replaced the fuse box because the low speed fan wasn’t working worked for a couple weeks then it stopped again do u know what could be the issue I got new cooling fans , new harness , new connections ,
Hey bud check the harness for power while the car is running if you’re comfortable doing so. If you can go to your local parts store and get a test light it’s pretty cheap and a good investment always start there. If you have power and still no signal you may have an issue in the pcm highly doubt that though.
@@CoachKFixeditTv I do it shows power in harness and then I test the connectors to the fans they always show power as well.
@@jorgeorduno3309 did you change the fan relays???
@@CoachKFixeditTv yes I even changed the high one and low one because the high one still works so I switched it around to see if the low one would work and nope same result the high one only works
They make a revised fan wiring harness that runs to the front of the vehicle so relays won't get hot and wires burn up
Hey my man I know Im a bit late but what is the tool you used to test the circuit on the fans 0:25 thanks in advance brother
Not a problem it’s called a power probe 3
www.amazon.com/Power-Probe-III-Case-Acc/dp/B005MVB3OY/ref=mp_s_a_1_11?dchild=1&keywords=power+probe+3&qid=1628333805&sprefix=power+probe&sr=8-11
I was replacing my radiator today and one of my fans was broken in half
Do not I REPEAT Do not use those fans! Either order a new set or go get one from a local junkyard!