Impresionante compañero.....Una verdadera obra de arte.....No estoy seguro si usted se dedica a vender dichas obras de arte.....De ser así, sería interesante saber su precio.....Lo dicho, Enhorabuena por tan hermosa obra de arte.....Un gran abrazo desde Las Islas Canarias (España)......................................................
Muchas gracias. Mientras que la acústica es mi hobby. El precio de esta columna por componentes es de unos 250 dólares, sin contar el trabajo y el tiempo invertido.
Добротно и качественно сделано,очень нравится.Практически все пересмотрел подобное на ютубе. Увидел надпись "вверх",значит понимаете о чем я). На свой вкус оставил бы все как есть,кроме сч и вч.Их бы заменил на мид басс 2шт по "6" дюймов и 2 пищалки. А что за саб поставили,8дюймов,мощность?Как называется? И по аккумулятору,получается 24в и всего 3000мач,маловато будет🤔 И про ручку хотел спросить,как ее носить,ручки же нет. во сколько обошлась Вам эта колоночка?
Весь комплект динамиков из microlab H600, достойная акустика была (не в счет аудиофилов). По аккумулятору, ну это все по желанию, вы же понимаете, что с такой отделкой и размером не предполагается ее носить по улицам и тд. для домашнего использования более чем достаточно. По ручкам, я не люблю их, портят вид, личное мнение. Можно делать конечно в стенках, но опять же жертвуя внутр. объемом, особенно если это колонка поменьше.
@@DIYAcoustic хочу добавить.Ручку можно сделать из кожи и смотреться будет четко.На улицу носить, разве что малолетки не смогут,тяжело,а так в машину закинул и поехал.Допустим на рыбалку,в лес ,дачу речку. Знаете же,что 3116д2,саб выход даёт 100вт,только при подключении в 2ом?При 4ом-50вт настоящих,не рмс,это при 24вольтах,а при 12вольтах,то вообще печаль-10вт.Некоторые лепят в сборку 12вольт и пук,пук.😁
Hi there. I like the build a lot. I'm planning to do a build with the same amp and similar power source and hoping I can ask you some questions please. Have you done any kind of battery life tests with it? Or even played 'loud music' for 'x hours'? Also, max voltage for 6s x 4.2v cells is 25.2v. Does the amp take 25v without any issues?
I don’t remember the exact data on current consumption, from about 200mah to 1A., It’s just that for a small room, 30% volume is enough completely. The column worked for about 9 hours without problems with a volume of 60-70%. At a maximum voltage of 25.2v, the amplifier worked without problems, you can use a 24v charger and your battery above will not be charged. The best solution would be to use a DC-DC converter, for example you can make a 3S, 4S, 5S battery and raise it to the required 24v. and you will not have a drawdown in power with a battery discharge.
hello, I used a regular crossover from microlab h600 acoustics, I didn’t measure its exact characteristics, since the acoustics sounded great. Frequencies are cut from approximately 280hz to 7000hz for the midrange speakers, the rest of the frequencies are played by tweeter. the only caveat, the midrange speakers are connected in series, and the tweeter is in antiphase. In any case, purchasing a ready-made crossover separately is not very good, you need to take measurements of all the speakers.
What exactly you don’t understand, everything is simple, if you buy a bluetooth module, an amplifier and everything else, then on each device there is a marking of connection pins and, accordingly, the permissible voltage.
Hi! I have a question. I have the same amolifier (tpa3316 2*50w + 100w), and I noticed that above 70% it clips. The bass becomes distorted and sounds trash. Did you noticed that on your own speaker? If yes, how can I fix it?
in my assembly the components are suitable for the power of the amplifier and the amplifier itself is powered by a 6s 24v assembly. If your speakers have a rated power lower than the amplifier, then you will have to: 1) use an external sound source module, bt, usb, etc. but with volume control. 2) if there is Bluetooth on the board, then use 2 variable resistors in series, 1 will be a volume limiter, 2 will be external to control the main volume.
The dimensions of the case were designed individually for the acoustics of the microlab H600, measurements of the parameters of the low-frequency speaker, setting the phase inverter port. My measurements won't fit your speakers. The main components are in the description.
If I understand you correctly, you wanted to know how long the Bluetooth speaker works at maximum volume, then it’s about 2 hours, since it has a 3000 mah, 24v battery.
Hello, acoustics cost about $ 270. It is heavy, and I'm afraid it will not be profitable with delivery. Can I add to the column, I didn’t understand what exactly because of the translator, sorry, you can drop the link or write in more detail
@@DIYAcoustic I am from India. It is 230 volts here with 50Hz frequency, I love your design. I wish to buy this model with Bluetooth and Wifi. Can be with a suitable attery adaptor getting power from 230v AC source.
There are no problems with voltage, we have the same thing in Russia. The problem is delivery, from Russia to India, the cost of shipping acoustics of the same size and weight is $ 290, which is very expensive. And so you can make acoustics according to your needs, using, for example, the Arylic amplifier from AliExpress.
Everything is simple, the source is a 6s battery, a 25V charger, 24V is supplied to the amplifier, about 16V goes to the panel backlight through a step-down converter.
It’s better for you to assemble a Bluetooth speaker or buy it yourself in your region, it will be much cheaper. I sell my finished projects only in my region.
@@DIYAcoustic Brother if I use 6000 mah 24 volt lithium ion battery and use the system at 60-70 percent volume then can I get backup upto 5 hrs? and are you answering for 2hrs backup on the basis of your practical experience?
You can easily calculate, knowing what is the current consumption of the amplifier. My speaker worked for about 10 hours when listening at a volume of 30-45%, maybe even more, I never discharged the battery to the minimum. Amplifier tpa3116 2 pcs. Perhaps if you use a more energy-efficient amplifier with high efficiency, it will work longer. After all, the load is floating, even the volume level of the low-frequency speaker depends. If you have a 6S battery at 6000 mAh (these are 12 cans of the 18650 type) and your amplifier, for example, consumes 1 ampere of current on average, accordingly it will work for 6 hours.
Najpierw mierzone są parametry głośnika til-małego, robię to za pomocą dodatkowej masy. Następnie obliczasz projekt obudowy, wymiary, ustawienie portu, jeśli falownik fazowy. W Internecie jest wiele formuł i informacji. Mam nadzieję, że tłumacz wszystko przetłumaczył poprawnie.
На максимальной громкости часов на 2, на средней около 6, всё зависит от ручки громкости сабвуфера. Я обычно слушал примерно на 30-40% громкости, этого для меня было достаточно, работала непрерывно около 9 часов. Аккумулятор 6s на 3000mAh., соответственно можно ставить ещё и ещё и пока место в корпусе не кончится, увеличивая автономность в разы.
Lo que desilusiona de este tipo de vídeos ni es que tu no puedas hacer una caja acústica para un parlante....desilusiona es el tipo de herramientas que utilizan para algo que no es tan complicado de hacer....y cuando vez que usan herramientas de primera tue piensas...y ahora que hago yo con mi serrucho mi sierra cortadora mi martillo y nada más...yo si e echo pero mucha gente ve esto y que va hacer 😫😫😫
@@matamistavineslateyevernig8238these small amps won’t overheat . There enough air space inside . He meant the the bass which doesn’t need port as it’s better sound sealed
@@ThaiRoney no really bro I've seen class d amplifier burned i was laughing at that video becuase the diy was freshly made i viewed his channel and found the same diy he made burnt
I think you should start speakers factory in USA and be patriotic unlike others so called American companies but greedy, un patriotic , just shameless at least Europeans kept up patriotism
Beautiful, clean. The attention to detail. love the finish product.. good job!
Thank you very much
This is one of the best Bluetooth speaker build. So professional and clean work 10/10 thanks for sharing
Thank you very much
Wow, that is a ton of work! I can only imagine how many total hours are in that project. Excellent attention to detail and beautiful finished product.
Thank you very much, you are right, the work took about two months and 120gb of video. Thanks for watching
ua-cam.com/video/EoPNqdF5syY/v-deo.html
man i love this kinda stuff .... so many people knows how to do this now
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Excellent craftsmanship. Look at that gorgeous speaker box. Beautiful. Professional.
Thank you very much.
besides the wood look on the speaker(not a fan of wood on speakers) it's an amazing build. well done.
Thank you very much.
Браво, крассава, уважуха, молодец всё чётко, прям как надо.
Спасибо!
👍👍👍 отдуши
Wow a utuber that doesnt just hit a button on a cnc machine...nice work!
Thanks
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Que espetáculo!! Parabéns por essa obra de arte.
Thank you very much.
Your creation is wonderful 😊
We all support you 💖
Thank you very much
Meu amigo, depois do trabalho e do capricho que vc teve nessa caixa, ganhou mais um inscrito...👏👏👏
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Great work. keep it up. lots of love 💙 from Pakistan
Thanks
unique dans facon d appliquer ses creations,j adore
Thank you so much for commenting and watching
Caixa de som ficou top viu
Thanks
Nice build......clean work....does it have good lows.
Please post a bill of materials that has links and component ratings
Thanks. The main components are listed in the description. All speakers used from Microlab H600 audio system.
Excellent sound system 😊
Thanks
Impresionante compañero.....Una verdadera obra de arte.....No estoy seguro si usted se dedica a vender dichas obras de arte.....De ser así, sería interesante saber su precio.....Lo dicho, Enhorabuena por tan hermosa obra de arte.....Un gran abrazo desde Las Islas Canarias (España)......................................................
Muchas gracias. Mientras que la acústica es mi hobby. El precio de esta columna por componentes es de unos 250 dólares, sin contar el trabajo y el tiempo invertido.
@@DIYAcoustic me lo imaginaba compañero.....muchísimas gracias por todo......cuídese x favor.....desde donde me escribe?????.....Bendiciones para
Soy de Rusia
Harika el işçiliği süper tebrik ederim 👍👍👍👏
Yorumunuz ve görüntülemeniz için çok teşekkür ederiz.
Amazing wood works,love your videos ,keep it up
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Добротно и качественно сделано,очень нравится.Практически все пересмотрел подобное на ютубе.
Увидел надпись "вверх",значит понимаете о чем я).
На свой вкус оставил бы все как есть,кроме сч и вч.Их бы заменил на мид басс 2шт по "6" дюймов и 2 пищалки.
А что за саб поставили,8дюймов,мощность?Как называется? И по аккумулятору,получается 24в и всего 3000мач,маловато будет🤔
И про ручку хотел спросить,как ее носить,ручки же нет.
во сколько обошлась Вам эта колоночка?
Весь комплект динамиков из microlab H600, достойная акустика была (не в счет аудиофилов). По аккумулятору, ну это все по желанию, вы же понимаете, что с такой отделкой и размером не предполагается ее носить по улицам и тд. для домашнего использования более чем достаточно. По ручкам, я не люблю их, портят вид, личное мнение. Можно делать конечно в стенках, но опять же жертвуя внутр. объемом, особенно если это колонка поменьше.
@@DIYAcoustic хочу добавить.Ручку можно сделать из кожи и смотреться будет четко.На улицу носить, разве что малолетки не смогут,тяжело,а так в машину закинул и поехал.Допустим на рыбалку,в лес ,дачу речку.
Знаете же,что 3116д2,саб выход даёт 100вт,только при подключении в 2ом?При 4ом-50вт настоящих,не рмс,это при 24вольтах,а при 12вольтах,то вообще печаль-10вт.Некоторые лепят в сборку 12вольт и пук,пук.😁
@@РусланналсуР-и3ъпо даташиту она не работает с 2Ом, 50w на канал, 1 чип работает в мостовом режиме, вот и получается 100w при 24в.
Ты точно заслуживаешь комментарии
👌 👌. Great skills and ideas
Thank you very much!
Good work..only a question..how do you connect 2 midrange and One tweeter from the crossover?
2 midrange connect consistently, tweeter in opposite phase.
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Hi
Good Job very clean but where is the bass i can feel juste à litle vibrations from the Woofer
Needs some adjustments
The recording volume was low so that there was no overload for the microphone.
@@DIYAcoustic yes i understand
But need excursion from the subs
Write in more detail, I did not quite understand because of the translator.
@@DIYAcoustic any way
This woofer needs something to be great 👍
Gut gemacht einsamme spitze
it looks great👍👍👍👍
Спасибо большое
Thank you so much !!!
Wow gut gemacht 👍👍👍👍☕
Thanks
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Hello I Like DIY Power TPA3116 😊
👍👍👍
Hi there. I like the build a lot. I'm planning to do a build with the same amp and similar power source and hoping I can ask you some questions please. Have you done any kind of battery life tests with it? Or even played 'loud music' for 'x hours'? Also, max voltage for 6s x 4.2v cells is 25.2v. Does the amp take 25v without any issues?
I don’t remember the exact data on current consumption, from about 200mah to 1A., It’s just that for a small room, 30% volume is enough completely. The column worked for about 9 hours without problems with a volume of 60-70%. At a maximum voltage of 25.2v, the amplifier worked without problems, you can use a 24v charger and your battery above will not be charged. The best solution would be to use a DC-DC converter, for example you can make a 3S, 4S, 5S battery and raise it to the required 24v. and you will not have a drawdown in power with a battery discharge.
@@DIYAcoustic what a champion response, thanks heaps man.
Nice design but i prefer middle tones not less then 16cm.
Parabéns muito lindo este trabalho 👊👊👊👊👊👊👊
Большое спасибо
What the item you burn the wire to the subwoofer with
I didn't quite understand your question
Hola puedes dejar información de los Twitter los medios y los bajos.
No entendí tu pregunta debido al traductor, pero si preguntaste sobre los parlantes, este es el conjunto completo del sistema de audio microlab H600.
Сделано очень качественно и красиво. Но мне почему то кажется что басов не хватает
Просто запись видео была сделана на очень низкой громкости, еще зависит от самого трека, к сожалению не возможно использовать хорошие треки.
@@DIYAcoustic а что за НЧ динамик и откуда взят?
Динамики от аудиосистемы Microlab h600.
hello. ca you show us the crossover that you are using ? or tell us. thank you!
hello, I used a regular crossover from microlab h600 acoustics, I didn’t measure its exact characteristics, since the acoustics sounded great. Frequencies are cut from approximately 280hz to 7000hz for the midrange speakers, the rest of the frequencies are played by tweeter. the only caveat, the midrange speakers are connected in series, and the tweeter is in antiphase. In any case, purchasing a ready-made crossover separately is not very good, you need to take measurements of all the speakers.
ua-cam.com/video/EoPNqdF5syY/v-deo.html
what is the fabric you use as a speaker cover?
I bought it on Ali Express, it’s called speaker fabric. I had a thin one, I used 2 layers.
@ thanks
You can upload link s in discretion .as speaker, tools .... 👍
Added links to the main components in the description, speakers from microlab 5.1 H600
X
@@josepcaralt7803 y
много пересмотрел, но вот этот ящичек понравился, красава
Спасибо
крутая колонка просто бомба
great job, superfinish
Thanks
ua-cam.com/video/EoPNqdF5syY/v-deo.html
29:06 What is the approximate price of such a speaker?
Именно готовой колонки или комплектующих (динамиков)?
Please give us wiring diagram of the Bluetooth speaker
What exactly you don’t understand, everything is simple, if you buy a bluetooth module, an amplifier and everything else, then on each device there is a marking of connection pins and, accordingly, the permissible voltage.
Nice one. I LIKE IT.
Thanks
Bossing hm that
Apresentação 10, áudio 2
what type of crossovers you have used?
A factory-type second-order crossover from the microlab H600 audio system was used.
Hi! I have a question. I have the same amolifier (tpa3316 2*50w + 100w), and I noticed that above 70% it clips. The bass becomes distorted and sounds trash. Did you noticed that on your own speaker? If yes, how can I fix it?
in my assembly the components are suitable for the power of the amplifier and the amplifier itself is powered by a 6s 24v assembly. If your speakers have a rated power lower than the amplifier, then you will have to: 1) use an external sound source module, bt, usb, etc. but with volume control. 2) if there is Bluetooth on the board, then use 2 variable resistors in series, 1 will be a volume limiter, 2 will be external to control the main volume.
@@DIYAcousticThanks so much for ths reply. I fixed the issue with an audio-potentiometer connected to aux input. Im a big fan btw. 😊
Can you send build plans and components
The dimensions of the case were designed individually for the acoustics of the microlab H600, measurements of the parameters of the low-frequency speaker, setting the phase inverter port. My measurements won't fit your speakers. The main components are in the description.
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Good job 👍🏻
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Great video. Awesome
Thanks 👍
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Very Nice build
Thanks
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Brilliant. I definitely want to buy this. What is the price. Can you include VU meters in the display.
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Молодец. Золотые руки.
Спасибо
Whats the backup time time at full volume?
If I understand you correctly, you wanted to know how long the Bluetooth speaker works at maximum volume, then it’s about 2 hours, since it has a 3000 mah, 24v battery.
@DIYAcoustic yes i am asking you exactly about it. Thanks.
Guau q hermoso soy fanático de los parlantes me encanta 10/10
Thanks
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Brilliant. I definitely want to buy this. What is the price. Can you please include VU meters
Hello, acoustics cost about $ 270. It is heavy, and I'm afraid it will not be profitable with delivery. Can I add to the column, I didn’t understand what exactly because of the translator, sorry, you can drop the link or write in more detail
@@DIYAcoustic I am from India. It is 230 volts here with 50Hz frequency,
I love your design. I wish to buy this model with Bluetooth and Wifi. Can be with a suitable attery adaptor getting power from 230v AC source.
There are no problems with voltage, we have the same thing in Russia. The problem is delivery, from Russia to India, the cost of shipping acoustics of the same size and weight is $ 290, which is very expensive. And so you can make acoustics according to your needs, using, for example, the Arylic amplifier from AliExpress.
@@DIYAcoustic доброе утро. большое спасибо мой дорогой товарищ
Subwoofer what inch ?
8 inch
Wiring diagram? Thanks a lot
Everything is simple, the source is a 6s battery, a 25V charger, 24V is supplied to the amplifier, about 16V goes to the panel backlight through a step-down converter.
How can I buy it from you?
It’s better for you to assemble a Bluetooth speaker or buy it yourself in your region, it will be much cheaper. I sell my finished projects only in my region.
Good job
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Fantastico
Thanks
ua-cam.com/video/EoPNqdF5syY/v-deo.html
13:47 a brush will be more convenient
What is price for india
The price will be about $500-550, including shipping about $250.
Excelente
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Cool Man 👍
Thanks
Use passive radiator
Absolutely perfect
Здравствуйте где купить такую колонку
Здравствуйте, можете написать на почту f1.4laser@gmail.com
What is the battery backup duration?
Bluetooth speaker works at maximum volume, then it’s about 2 hours, since it has a 3000 mah, 24v battery.
@@DIYAcoustic Brother if I use 6000 mah 24 volt lithium ion battery and use the system at 60-70 percent volume then can I get backup upto 5 hrs? and are you answering for 2hrs backup on the basis of your practical experience?
You can easily calculate, knowing what is the current consumption of the amplifier. My speaker worked for about 10 hours when listening at a volume of 30-45%, maybe even more, I never discharged the battery to the minimum. Amplifier tpa3116 2 pcs. Perhaps if you use a more energy-efficient amplifier with high efficiency, it will work longer. After all, the load is floating, even the volume level of the low-frequency speaker depends. If you have a 6S battery at 6000 mAh (these are 12 cans of the 18650 type) and your amplifier, for example, consumes 1 ampere of current on average, accordingly it will work for 6 hours.
@@DIYAcoustic Thank you for your kind information and regards from India 🙂
Nice
Thanks
Awesome 👌
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Nice ,bat no bass?
subwoofer does not move
recording was made at low volume, and the camera angle in front of the speaker
Thật tuyệt
Thank you
can you tell the connection diagram
exactly what connection?
@@DIYAcoustic this speaker conection diagram
The mid-range speakers are connected in series through the crossover, the tweeter is in antiphase. subwoofer directly to the amplifier.
bhai tera subwoofer to hil bhi nhi rha..!
lindo trabalho!
Thanks 👍
1 SUPER HUGE SPEAKER
စန်နုစ်စ်
Jak policzyłeś pojemność/objętość obudowy?
Najpierw mierzone są parametry głośnika til-małego, robię to za pomocą dodatkowej masy. Następnie obliczasz projekt obudowy, wymiary, ustawienie portu, jeśli falownik fazowy. W Internecie jest wiele formuł i informacji. Mam nadzieję, że tłumacz wszystko przetłumaczył poprawnie.
@@DIYAcoustic przetłumaczył dobrze, dzięki za odpowiedź. Chociaż dalej mało wiem na ten temat 😉
I did this to. I made a video on my shorts
На сколько акума хватает?
На максимальной громкости часов на 2, на средней около 6, всё зависит от ручки громкости сабвуфера. Я обычно слушал примерно на 30-40% громкости, этого для меня было достаточно, работала непрерывно около 9 часов. Аккумулятор 6s на 3000mAh., соответственно можно ставить ещё и ещё и пока место в корпусе не кончится, увеличивая автономность в разы.
Спасибо
Price?
~250$ for all components
good bro !!!
Diy speaker ua-cam.com/video/EoPNqdF5syY/v-deo.html
Lo que desilusiona de este tipo de vídeos ni es que tu no puedas hacer una caja acústica para un parlante....desilusiona es el tipo de herramientas que utilizan para algo que no es tan complicado de hacer....y cuando vez que usan herramientas de primera tue piensas...y ahora que hago yo con mi serrucho mi sierra cortadora mi martillo y nada más...yo si e echo pero mucha gente ve esto y que va hacer 😫😫😫
Не продаешь?
Уже продана, колонка собиралась в 1 экземпляре.
👍👍👍👍👌😉
Very good
ua-cam.com/video/EoPNqdF5syY/v-deo.html
good
Ask for a recipe for cutting wood. Make a speaker cabinet.
Вы можете написать свою почту, я вам отправлю файлы проекта. Но для каждых динамиков нужно делать расчет индивидуальный.
@@DIYAcoustic здравствуйте как купить колонку
Are u sure its 200watts?!
This is the maximum total power of 3 channels at a voltage of 24v, the column operates at this voltage. Power corresponds to the declared.
👏👏👏
ua-cam.com/video/EoPNqdF5syY/v-deo.html
Bass ?????
recording was made at low volume, and the camera angle in front of the speaker
Muy grueso la caja creo
No air vent 😂😂😂
it’s called a sealed system and it’s supposed to give punchy bass.
@@gliderman9302 i think he meant to say about the amplifier it'll overheat💀
@@matamistavineslateyevernig8238
So., You're positive thinking 😅
@@matamistavineslateyevernig8238these small amps won’t overheat . There enough air space inside . He meant the the bass which doesn’t need port as it’s better sound sealed
@@ThaiRoney no really bro I've seen class d amplifier burned i was laughing at that video becuase the diy was freshly made i viewed his channel and found the same diy he made burnt
the bass is not good
HI, because the volume of the speaker during the demonstration was low, so that there was no distortion when recording video.
I think you should start speakers factory in USA and be patriotic unlike others so called American companies but greedy, un patriotic , just shameless at least Europeans kept up patriotism
Batería muy muy muy escasa....
ว😊)ล~
Зт
I don't like class d..
Hi, I think class D is lightweight and efficiency is better than class AB.
Im using class A pre amp with class D amp and sound is not so "unorganic"
DDDDDDDDDDDDDDDD