ECU flash disaster - I just bricked my ECU!

Поділитися
Вставка
  • Опубліковано 7 вер 2024
  • I accidentally wiped my ECU! I moved out of the door and kicked the cable out like a moron. This is a slightly humorous look at the downside of trying DIY remaps. Thankfully the tool I use was able to recover from the partial write to the ECU.
    Music: Kevin MacLeod
    "Pixel Peeker Polka - slower" Kevin MacLeod (incompetech.com) Licensed under Creative Commons "Attribution 3.0" creativecommons..."

КОМЕНТАРІ • 153

  • @vPerformance
    @vPerformance  11 років тому +9

    There's nothing the professionals do that an amateur can't learn with patience and intelligence. There are risks, as shown in the video, but I did my own remap and it was great - and free.

    • @marianandrei8946
      @marianandrei8946 4 роки тому

      I'm only starting to learn and bought a Galletto for my zafira A to do it myself(including map edit)only to find out that Galletto can't read ECU through OBD.Now i have to buy MPPS and work directly on the pump.I'll see what i'll blow up from there :D.It's gonna be funny ( BOSCH PSG16 Is a pain in the ass).
      Anyway you're right.You can't learn without failing.And I always say that anything can be done as long as it was done by another human,haha :D .

  • @vPerformance
    @vPerformance  11 років тому +9

    Normally its a low voltage battery that causes such instability then. The MPPS software I was using was able to recover from the partial write. It detected an incomplete flash so it just wiped it and started over.

  • @treyturner3288
    @treyturner3288 7 місяців тому +1

    That song plays in my head regularly I almost couldn't even hear it until I noticed a slight echo.. 😵‍💫

  • @defaultdaniel
    @defaultdaniel 5 років тому +2

    Dude I did the EXACT same thing on my brand new STI. Was all excited to go stage 2, but during the flash I was in a rush to clean up and finish the job. Stepped out of my car while it was flashing and the long accessport cable got caught on my shoe and just yanked out like 1 cm from the OBD port. Lost communication with ECM, tuned it again, car drove "okay" for a week, then started throwing random codes. Fault was bad ecm.

  • @jack765ful
    @jack765ful 5 років тому

    "Not rocket science" he said. 🤣
    Bro, I'm glad your ECU recovered.

  • @vPerformance
    @vPerformance  11 років тому +2

    Start off with just reading your original map off the ECU, then flashing it straight back again. Then start with something simple like a small increase to the torque limiter map, and go from there gently. If you don't have a dyno you need lots of testing and not a lot of greed for power :D

  • @abuKaJeiN.
    @abuKaJeiN. Місяць тому

    incredible 2012 energy

  • @jeffmee763
    @jeffmee763 5 років тому +1

    Same about the music I thought we were going to the fairground afterwards for a test drive.

    • @chrisfrost7337
      @chrisfrost7337 4 роки тому

      What a tune. A masterpiece of our time.

  • @Re3Ns
    @Re3Ns 9 років тому +8

    LOL "Pat my shants"
    Does the MPPS have a database of mapping files, or you have to search for it yourself? Where did you find mapping files for your car?
    May yer lum reek :)

  • @bananabombprods
    @bananabombprods 9 років тому +8

    Hahahaha that face, I know that face.
    -Slack

  • @DigbyPixels
    @DigbyPixels 11 років тому

    Very nice.
    Good video.Well explained and even well shot.
    I'm still not going to remap my ECU though !

  • @TheCNR200
    @TheCNR200 8 років тому

    I feel for you man. I've had lot of problems working with electronics & it goes tits up. Glad you sorted it out. Tuners usually run the engine. Leaving the ignition on can burn the coil pack out, that would be a real drag! ;) lol

    • @5Siver
      @5Siver 5 років тому

      Flashing is usually done on key on. Where do you get your info from?

  • @TheShmeebitdog
    @TheShmeebitdog 7 місяців тому

    So what it that adapter you are using mine looks nothing like that and what’s all the flashing lights all about

  • @CPMotors814
    @CPMotors814 5 років тому

    Good O'l scots humour "Pat my Shants" 🤣👌🏻

  • @MrSpeedy99
    @MrSpeedy99 8 років тому +2

    A tonne of bricks was shat at that moment +vPerfornance

  • @reza524
    @reza524 2 роки тому

    Hello. I have a question. I have a Peugeot 207 1.4 8v Flex, with ECU Bosch 7.4.9. I have it's map file and now after remapping it's file with a professional guy, want to know that MPPS can write this Remap file on my ecu with OBD2? Thanks

  • @chiptuning-store9735
    @chiptuning-store9735 10 років тому

    Please make more Vids over remap-if you can :-) you're a funny guy !!!
    best regards from Germany

  • @shifty2755
    @shifty2755 4 роки тому

    I had a bad checksum whilst downloading a map onto my mercedes. Luckily I didnt get locked out and discs recovery with kess V2.

  • @chtdmrc
    @chtdmrc 8 років тому

    the same happened to my car. mpps v16 writing the cable snapped. tool is not working. I can not write the original .bin file again. EC only reading program. ECU or can not write

  • @gmanBNR34
    @gmanBNR34 10 років тому +1

    farking hilarious my good sir!

  • @shwappler
    @shwappler 4 роки тому

    Used MPPS v16 and now I have "Block data checksum error" after it finishes (I used ecuSafe for dpf off) and now i get same error even with original file no matter what i do. Can someone please help? I can still communicate with the ecu, ID is ok. I have original file through OBD. At first it worked really well, had no problems but since i used EcuSafe 2.0 it ruined it.

  • @riggacars
    @riggacars 6 років тому

    My car has died because of this. A friend of mine told me he could map my car and stupidly I believed him. Mid map one of the kids opened the door on the car and apparently it's deleted ecu and can't recognise it any more... So can't even put the factory map back on it. I have no idea about maps and stuff but I'm looking at £200 for a second hand ecu to put on haha lesson learned.

    • @vPerformance
      @vPerformance  6 років тому

      I was lucky - but it sounds like you were not. Sorry buddy :(

  • @asalcommonrail
    @asalcommonrail 5 років тому +1

    I have a question when we write the ECU file and when writing the connection is lost, will it damage the ECU? or can we repeat the rewrite?

    • @acshorts84
      @acshorts84 4 роки тому

      On my case my PC turned off writing the ECU, now i can't write... ☹️

  • @andisadler2897
    @andisadler2897 5 років тому

    I take it this kit can map any car? I have a GSI 200bhp standard maybe 210bhp as i have nice exhaust on it and a panel filter. It will map my car yes? as its turbo?

  • @shawng5799
    @shawng5799 8 років тому

    What is MAGIC recovery? Doesn't seem to be an option I can see? I had that face on a few weeks ago when mid flash with a Galletto a pop up launched in Italian eeeeeekkkkk!!!!!

  • @Pendawa_Diesel_Plus
    @Pendawa_Diesel_Plus 5 років тому

    If at writing file to ecu and the connection is lose can this problem make the ecu a risk

  • @gydddd
    @gydddd 9 років тому

    Can you recommend any software to edit EDC16 maps? My trying to find software for my Golf Mk5 is a nightmare, it seems that VAGSuite is only compatible with EDC15 ECUs

  • @thomasadmiral3401
    @thomasadmiral3401 6 років тому

    Hello!
    Now I was doing this as well,it did not write for anything the ECU.
    mpps-v16, can you help me?-where find I the recover?-now don't start the car and don't see the software.
    thanks!!!!

  • @8310kenny
    @8310kenny 8 років тому

    Well I've just bricked my Ecu it's now useless will not write at all good job I've kept my standard Ecu

  • @laisvidasss
    @laisvidasss 10 років тому +2

    Yes, i have read original file and saved it before iv flashed tuned one. So, What steps should i take?
    Should i Try on recover mode to write that org file?
    Edc15c2 . 2,0 hdi

    • @vPerformance
      @vPerformance  10 років тому

      Attempt to write the original file. My mpps clone fixed it from there

  • @hectorlambies7400
    @hectorlambies7400 6 років тому

    did you know if VAGsuite recalculates automatically checksum?¿

  • @NOXXism
    @NOXXism 9 років тому

    So what was your objective? Get more power? Did you make the map yourself or did you buy it from somewhere else? How has it worked so far?

  • @PlagueDr00
    @PlagueDr00 9 років тому

    im so laughing my ass off at this, even so when I seen your face.I know it wasn't funny if you cook your ecu, but by god I had stiches,lol

    • @vPerformance
      @vPerformance  9 років тому +5

      Ste Beckett We f***ed it up so you don't have to :)

  • @RGD-Audio-Repairs
    @RGD-Audio-Repairs 7 років тому

    i have just downloaded MPPS, as i plan on bumping up my Golf mk4 mapping.
    First load up of MPPS, it just comes up with a firmware update thing..
    What do i do with that? Do i have to download a file from internet somewhere, for it?
    Wont let me get past that, to the main software, Until i do it..
    cheers

  • @Ihelpanytime
    @Ihelpanytime 7 років тому +2

    R.I.P ECU
    666-2012

    • @vPerformance
      @vPerformance  6 років тому

      God bless her, and all who sailed in her

  • @PlayoutONE
    @PlayoutONE 11 років тому

    Dude my heart was racing for you, It felt like breaking my own car from here, I'm glad you got yourself sorted out in the end, I have looked at your other video and bought all the stuff, I have a mk4 golf 1.9tdi 90bhp trying to get around 115bhp, Do you think you could give me some pointers?

  • @laisvidasss
    @laisvidasss 10 років тому

    Hello, I've just brick my ecu with mpps clone :) tried to flash tuned file to ecu (a bit tuned). Winols said the file has sinc block error or something, but I have not paid any attention to it. It could be the reason? is in't it? just have sent an email them. how do you think, will they help me? any advices? thank you

  • @QQ-hm4nu
    @QQ-hm4nu 9 років тому +2

    Where did you get the cable to tune ?

  • @AnthGott
    @AnthGott 4 роки тому

    How do I do checksum

  • @SayWhaaaaaaaaaaaaaaaaaaaaaaat
    @SayWhaaaaaaaaaaaaaaaaaaaaaaat 5 років тому

    I REALLY doubt that it is possible to brick ecu with MPPS. if you read and write only DATA part -then it's impossible. Just write again.

  • @shifty2755
    @shifty2755 5 років тому

    I dont even breathe or blink when im remapping. Only takes one second.

  • @poshpanda469
    @poshpanda469 4 роки тому

    My first attempt, car didn't start. MPPS - "can't find ecu". New file pgm v. 21,write,it starts and runs with a flashing engine fault light.
    I don't think this is something for amateurs. 🤔🙄😕😞

    • @pedronogueira6897
      @pedronogueira6897 3 роки тому

      Pgmv? What is it? Where did you find it? I have the same problem

  • @BLASIOTEAM
    @BLASIOTEAM 6 років тому

    Hi is difficult or impossible to brick ecu with stable connection and 2 battery? Thank you

    • @vPerformance
      @vPerformance  5 років тому

      Still possible if you flash a bad map on!

  • @christopherwalker8203
    @christopherwalker8203 7 років тому

    Can you send me a link to the seller on ebay that you bought the flasher from? I see them on there but non that look like yours.

  • @sibakweshingirai8302
    @sibakweshingirai8302 7 років тому

    hie !what gadget are you using.because I want to buy mine

  • @kokotajebka
    @kokotajebka 10 років тому +4

    Backup factory firmware before it !!!!

    • @vPerformance
      @vPerformance  10 років тому

      Absolutely!

    • @LinuxUsersonly
      @LinuxUsersonly 10 років тому

      v11o Hey when you are selecting your Car in the program how do you know what car is yours because there are so many in one category does it state it on the logbook?

  • @rusuhoratiu9462
    @rusuhoratiu9462 7 років тому

    can you give to me a nice tuning map for golf mk5 2.0 tdi 140 bhp ?

  • @ethanmccrory1727
    @ethanmccrory1727 4 роки тому

    I bricked my ecu because there was an error in the program. I managed to recover using a bench flash. If anyone need help doing that let me know!

    • @acshorts84
      @acshorts84 4 роки тому

      I bricked my ecu... The PC with low batery Turn off writing the ECU ☹️... Opel Corsa C 1.7 DTI Delco ECU... Any idea?

    • @ethanmccrory1727
      @ethanmccrory1727 4 роки тому

      @@acshorts84 you could try a bench flash. Does the check engine light not appear on the dash with the key on? How confident do you feel with mechanical + electrical work?

    • @acshorts84
      @acshorts84 4 роки тому

      @@ethanmccrory1727 yes, with ignition the engine light appears, I tried bench but it didn't work, when reading it appears wake up error ... kess is the clone ... maybe that's why he didn't read ... I'm not a professional, but I know the logic

    • @ethanmccrory1727
      @ethanmccrory1727 4 роки тому

      @@acshorts84 maybe try purchasing an mpps clone and see if that can wake the ecu. What type of ecu is it? Are you sure you wired the bench flash correctly, this caused a lot of headache for me?

    • @acshorts84
      @acshorts84 4 роки тому

      @@ethanmccrory1727 the problem occurred with the mpps clone and never wrote again ... I tried to obd and bench with the kess clone, following the scheme and nothing ... maybe I wasn't doing it right ... until I remembered to test with the kwp 2000 by obd and managed to write ... :) delco hybrid Ecu

  • @mohamedabih947
    @mohamedabih947 10 років тому

    thank you my friends begin download

  • @gezabalint8880
    @gezabalint8880 9 років тому

    Hey!
    Do you have any idea why mine throws an error at me? Even if i get the fuse out?
    It says remove the fuse nr 11 which the car doesnt even have. I removed nr 15 which is a fuse for the dash. The car is an 1999 VW PASSAT 1.9 tdi 110 HP.

    • @hbfj
      @hbfj 7 років тому

      You can't write the MSA15 ecu via obd. this ecu has two plcc eprom chips . You need to desolder them and program two new chips ,because the originals are one-time-programmable chips .

    • @shifty2755
      @shifty2755 4 роки тому

      @@hbfj
      Yes, the information is burned into the chip.

  • @gonzagnr2
    @gonzagnr2 10 років тому

    after the first atempt to flash the ecu failed.
    how did you recover the ecu?? did you simply try to write it again??

    • @vPerformance
      @vPerformance  10 років тому +2

      I attempted to flash a map file on again. MMPS detected my f***ed up map and offered a "Recovery mode" which erased the ECU and restored the new file.

  • @craigharvie24
    @craigharvie24 12 років тому

    The music is kinda strange lol kinda reminds me of pacman however i think pacman does not need re-mapping ;-)

  • @passatb638
    @passatb638 8 років тому

    I've had similar problem I tried to flash my ecu on pass at b5.5 and I torn off my laptop by mistake and I tried to reflash it not working it says no ecu information found any suggestions?

    • @chtdmrc
      @chtdmrc 8 років тому

      +passat b6 Did you find the solution I've had the same thing?

  • @thunderfox
    @thunderfox 11 років тому

    I was using a Galletto tool that the car owner had bought. I've bought an MPPS now, I hope I can recover from the previous bad flash! Wish me luck! Did you use Slow Recovery Mode and just hit the Write button the second time?

  • @cj7girl280
    @cj7girl280 10 років тому

    What chip and chip burner and software did you use to re-program your ecu? Could you share with us a website or link?
    Good to hear you didn't kill your car's brain. :)
    At first thought "bricked" my ECU was that you pooped on it... :0 Good to hear you didn't do-do that... ROFL

    • @vPerformance
      @vPerformance  10 років тому

      Software was MPPS for flashing, and VAGsuite for editing the maps. Thankfully it wasn't the other sort of "bricking"!

    • @cj7girl280
      @cj7girl280 10 років тому

      v11o
      Thanks for the information!
      I was worried what you meant about "bricked" ROFL.. ;)

  • @spammattsubi1
    @spammattsubi1 11 років тому

    I am looking in remapping as I am debating whether it is worth $500+ for a shop's shelf tune when I can do it myself. I am beyond scared to ruin my ECU but it seems like with the program you are using the risk is minimal; just make a copy of the stock file, plug up to OBD2 and let it do its thing.

  • @Pendawa_Diesel_Plus
    @Pendawa_Diesel_Plus 4 роки тому

    How to recovery ecu file when we write wrong file to ecu ?

    • @vPerformance
      @vPerformance  4 роки тому

      With mpps you just write a new file again, and it will recover

    • @Pendawa_Diesel_Plus
      @Pendawa_Diesel_Plus 4 роки тому

      @@vPerformance i have try with kess by recovery the original file but the ecu cannot save the the file
      and the engine check light is off

    • @Pendawa_Diesel_Plus
      @Pendawa_Diesel_Plus 4 роки тому

      @@vPerformance if the flash memory is broken can we change with a new flash memory chip and write file again can it work and fix the problem?

  • @zaherulhuda5712
    @zaherulhuda5712 8 років тому

    sorry about your ecu mate :(

    • @vPerformance
      @vPerformance  8 років тому +2

      +Zaherul Huda I was able to recover it with the software. I thought I was doomed for sure.

    • @RGD-Audio-Repairs
      @RGD-Audio-Repairs 7 років тому

      Surely, a simple re-write of the file, would un-brick it?
      As it erases the ECU before the new write..

  • @idriwzrd
    @idriwzrd 8 років тому

    Moral of the story is; don't get out of the car during reflash upload to get a better camera angle?

    • @vPerformance
      @vPerformance  8 років тому

      +idriwzrd That is wisdom. I feel like I should write it down lol

  • @rohanboswell5408
    @rohanboswell5408 5 років тому

    Question!? Is it that you leave the tuner on or not?

    • @vPerformance
      @vPerformance  5 років тому

      Sorry I don't think I understand the question

    • @rohanboswell5408
      @rohanboswell5408 5 років тому

      Some tuners are pluged in to the DCL and stay there ..

  • @thunderfox
    @thunderfox 11 років тому

    Well SHIT. That's exactly the same that happened to me... Except I didn't trip on no wires, it just stopped xD
    What did you use to recover it?

  • @laisvidasss
    @laisvidasss 10 років тому

    Should I set it on recovery (slow) mode?

    • @vPerformance
      @vPerformance  10 років тому

      Mine didn't have that, but it sounds good

  • @terracleanagent5062
    @terracleanagent5062 9 років тому

    v11o what do you use for modifying your map

    • @vPerformance
      @vPerformance  9 років тому

      Nick Fox This was VAGsuite, but WinOLS is another good alternative (but harder to use)

  • @renoir6900
    @renoir6900 4 роки тому

    Same happened to me 😅

  • @laisvidasss
    @laisvidasss 10 років тому

    Is there any recover mode on mpps clone? :(

    • @PaulAlford75
      @PaulAlford75 10 років тому

      It can detect a failed write. It can replace the file with a new file and did a good job for me. Do you have a backup of your original ECU file?

  • @leaperv12
    @leaperv12 8 років тому

    Hey Bud, Could you be kind enough to post a link of the Mpps tool you are using, that way i wont have to try 6 different cables before find the right one. In my case i got a 1.8T AWM in a Passat
    thanks

  • @pc3046
    @pc3046 9 років тому

    Hi m8
    Wondering can you help.ive done a remap before all went good.so im remapping my seat leon and half way throught my laptop went dead now the car wont start.is there any way to rewite my file back to my ecu.my battery is constant 12.30volts.

  • @99__1
    @99__1 4 роки тому

    من خوب میدونم چه حسیه وقتی چک بپره
    البته و مشتری هم منتظر تحویل گرفتن ماشینش باشه...

  • @dkizilkaya6839
    @dkizilkaya6839 5 років тому

    This happened to me when i was getting out to get a smoke haahaah.

  • @bravebrowser261
    @bravebrowser261 9 років тому

    CMD only

  • @mirondraghici5356
    @mirondraghici5356 4 роки тому

    i really appreciate your other videos, i subscribed, but i don't get the annoying background music on this one..was it meant to be funny? is not

    • @vPerformance
      @vPerformance  4 роки тому +1

      Unfortunately 8 years ago I thought it was entertaining

  • @DJMac
    @DJMac 4 роки тому

    so how did you recover it?

    • @vPerformance
      @vPerformance  4 роки тому +1

      Fortunately mpps has write recovery. I attempted the flash again, it detected the partial attempt, and started again from scratch

    • @DJMac
      @DJMac 4 роки тому

      @@vPerformance nice one. knowing my luck i would do the same thats why i asked lol

  • @kenpoS2K
    @kenpoS2K 10 років тому

    Pat my shants lol

  • @bababaphotri
    @bababaphotri 7 років тому

    it would be great if you choose appropriate music for the video

    • @bababaphotri
      @bababaphotri 6 років тому

      No No No! sorry! I love the music.

  • @leviackarmen4332
    @leviackarmen4332 2 роки тому

    The music is annoying

  • @napper1496
    @napper1496 11 років тому

    flashing with a galletto 1260 isnt ECU remapping. Guys,dont even think about doing DIY remaps. actually its not too bad with vw/pug but......when you end up bricking the ecu you'll wish you hadnt started

  • @sabz_bhp
    @sabz_bhp Рік тому

    Mate wtf is with the music man

    • @vPerformance
      @vPerformance  Рік тому

      I used to be much younger. Music was fun then. How old is this video? A decade?

  • @andreikashin
    @andreikashin 8 років тому +1

    How exactly did you recover ECU firmware?

    • @vPerformance
      @vPerformance  8 років тому +1

      MPPS had a recovery mode. I attempted the flash again and it detected a failed write, and offered to fix it. Thank god!

    • @andreikashin
      @andreikashin 8 років тому +1

      You are lucky. Thanks to god and MPPS engineers. As I know Galletto cannot recover.

    • @hbfj
      @hbfj 7 років тому +2

      And when the recovery mode doesn"t works , you can desolder the 29f400 (or some edc15 ecus 29f800) and you can write in a programmer .

    • @therealchayd
      @therealchayd 7 років тому

      I think the ECU has a part of memory (boot block) that can't be overwritten, so even if you mess up the main flash, it'll sit there waiting for a magic command to tell it how to recover, I guess MPPS knows this. Saves a lot of faffing around with chips. If you overwrite the boot block, it's time to get the reflow tools out!

  • @julespatch
    @julespatch Рік тому

    🤣🤣😢

  • @chrissyong1223wjl
    @chrissyong1223wjl 8 років тому

    lmao

  • @yugen042
    @yugen042 10 років тому

    Dat face :)

    • @vPerformance
      @vPerformance  10 років тому

      The face of a man shitting his pants.

    • @loserbmx
      @loserbmx 10 років тому

      v11o What was that you were using to flash your ECU?

    • @saylllo
      @saylllo 10 років тому

      loserbmx Brain my friend, just brain :)

    • @saylllo
      @saylllo 10 років тому

      loserbmx Yopu can use many of interfaces, but, you nedd UNDERSTANT before do that. This is a best CHIPTUNING tool kitt :)

  • @galingas
    @galingas 10 років тому

    "Working" with shitty MPPS clone... :) Shame, guys..

    • @vPerformance
      @vPerformance  10 років тому

      Yeah I know, I know. It did the job nicely though and I learned a LOT in the process

  • @jeffmee763
    @jeffmee763 7 років тому

    I had to turn the sound off awful.

    • @vPerformance
      @vPerformance  6 років тому

      Yes I apologise. Our filming and editing has improved over the years.

  • @romankahun2764
    @romankahun2764 6 років тому

    Is dump unit ... easy way start writing again thats all, but try BMW or mercedes :D .... dont use cheap china shit clone .......

  • @diytech4u
    @diytech4u 4 роки тому

    carnival music sucks