You need to determine if your Lipo is a regular Lipo or a HV. Regular Lipo charge at 4.2 HV Lipo Charger at 4.35. If you are using a GNB most likely it’s HV But please verify
Can you set different amps for each battery to charge? For instance if one battery is 750 mah and another one is 350 mah. Can you set one battery to charge at .3 and the other at .7 amp?
Nope, not possible for this charger. But since most of the FPV 1S batteries are 300/450/550 capacity, it should be fine to charge them even with the highest amp
I've seen talk about non-balanced charging being dangerous, does this do balanced charging? Is that something I need to worry about? Or does it not matter with this charger because each port is separate?
For this particular charger, as I was saying in the video, this is a series based charger and it is mainly for 1S lipos. So yes, each port is separate and since it is 1S you don’t need to worry about the balance issue
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Pro tip: you can remove the black cover (by unscrewing the 4 corrner bolts) under this there is a clear plastic so you get to see the inside 🧐
great video, thank you very much. really helped me out.
Glad you found it helpful
Simple n best tutorial until its done 👌🏼
What is tue purple number??
The voltage from the USB C charger
Love it ❤
I was actually getting ready to buy this… my betafpv one isn’t charging anymore
Trust me, once you get Whoopstor you will want to throw the BetaFPV one out the window
How can you tell if your batteries need to charge at 4.2 Va 4.35? I am using 660 1s gnb batteries. Thanks
You need to determine if your Lipo is a regular Lipo or a HV. Regular Lipo charge at 4.2 HV Lipo Charger at 4.35. If you are using a GNB most likely it’s HV But please verify
Regular Lipo is 4.20V if the Lipo if a LiHV Lipo then 4.35V Check your batteries to determine what type they are
Hi! Thanks for the guide! Would a 140W Mac charger brick be okay to charge with?
Assumption is yes as the W is more then required
Nice vídeo ty Bro 💪🏽
Can you charge different sized batteries at the same time with it, like an 850Mah and a 500 Mah?
Yes you can
Can you set different amps for each battery to charge? For instance if one battery is 750 mah and another one is 350 mah. Can you set one battery to charge at .3 and the other at .7 amp?
Nope, not possible for this charger. But since most of the FPV 1S batteries are 300/450/550 capacity, it should be fine to charge them even with the highest amp
@ okay. Thank ya
I've seen talk about non-balanced charging being dangerous, does this do balanced charging? Is that something I need to worry about? Or does it not matter with this charger because each port is separate?
For this particular charger, as I was saying in the video, this is a series based charger and it is mainly for 1S lipos. So yes, each port is separate and since it is 1S you don’t need to worry about the balance issue
do you add up the mah, is it a parallel charger?
No it’s not a parallel charger, each port is separate. If you want to says it more a serial charger. No need to add up the mah