Time Stamps Disassemble original RM motor mount: 0:15 Installing aluminium motor mount: 1:27 Dealing with the motor: 3:28 Gear mesh setup: 6:31 Installing oil shock: 9:30 Testing: 11:08
Where the stock suspension connects to the back end of the body, that plastic broke for me. This mounting style looks like a more solid solution than super glue. Excellent video, and thanks for helping me!
The T-bar breaks pretty easily. The rear motor catcher/clip also breaks easily. So far I haven't got any problem with this motor mount yet and it doesn't hit the body I use (The old NSX).
have u upgraded the tires?` for tracks like the kyosho ones, get "pn soft" tires for front and "pn super soft" tires for the rear. :) for carpet its some other ones. tires make most of the performance of mini z
Thanks for the suggestion. I've just got Kyosho radial 30 degree front and 20 degrees rear but haven't installed them yet. I run my car mainly on dirty office floor so I'm also looking at GQ foam tyres. I really want to try PN and Marka too.
Right now I'm using Radiolink RC3S hooked up to multiprotocol box. ua-cam.com/video/zJmg_gv34us/v-deo.html I might change it to Futaba 3PK with multiprotocol box soon.
It's very simple. I just use the pieces I have. Basically it's Lego Technics, stack in 2 layers and held together with black pecks. The pieces you need are long 5-12 holes and L shape pieces to make it rigid. Here are some photos so you can adapt it to the pieces you have. imgur.com/oaH7JV9 imgur.com/iUsKrCT imgur.com/PPDfgew imgur.com/xYg3ZXe ps. It's not the most financially sounded stand because you can get PN Racing foam car stand for about 2-3 Euros but I didn't have to pay for it.
Really difficult because the steering is limited. However if you have 3D printer you can print a new chassis to have enough steering, install all new electronics along with gyro and use just the motor mount from the original car. But that's not really a Mini-Z is it?
I use multiprotocol module. Here's the video tutorial. ua-cam.com/video/zJmg_gv34us/v-deo.html Actually the FHS and FHSS doesn't mean it would connect to each other. It just says "frequency hopping spread spectrum" technique to avoid interference. What makes Tx talks to Rx is protocol. I forgot to mention Mini-Z FHS is actually FlySky AFHDS protocol. You can use FlySky radio with it too. Here's the tutorial. ua-cam.com/video/fX0REIw1GRA/v-deo.html
Yes, you can use any motor mount. MM also works with this chassis. Diff is the same as RM. But the wheelbase will change according to the motor mount you use. MM with RM T-plate will start from 102mm wheelbase so you'll have to change the T-plate too to get 98mm wheelbase. Which body are you going to use it with?
Hello, could you recommend please good grip max sticky tires of PVC laminate for MR03? I understand that laminat is not the bast surface for non drift car, but it all what I have. :)
Mini-Z radial tyres. It works even on dusty surface. Use more degrees at the front than back eg. 30 degrees narrow front + 20 degrees wide rear. If the back has more grip it won't spin out easily.
No, the one I need is motor mount and the one I removed is from plastic that has cracked. The plate is graphite and yes, it's stiffer than the one on this aluminium mount.
Diff is a bolt-on so tutorial isn't really needed. You can also see in this video that I just thread it through and lock it in place with grub screw. The best one right now is PN Racing (choose according to your motor mount because LM is wider). www.kenonhobby.com/PN-Racing-Mini-Z-MR0203-V3-Ceramic-Ball-Diff-Set_p_42916.html The one from Mini-Z is great too but a tad more expensive.
Thanks for the info. I recently installed a xspeed motor and I think my diff is toast. 🙄 I expected it to be the first thing to go. I’ll look into the PN racing one. Hopefully I can find a cheaper price than what I’ve been seeing on eBay.. 🤑
Thanks for reminding me. Here you go. www.rcmart.com/kits-miniz-c-420_1184.html Normally you can buy it from local Kyosho dealer but I really should add link for international shop too.
Yes, you can. Just check if you have the wheels for the width you are going to buy. If it's all narrow then it's pretty standard. Some cars come with all narrow out of the box. If it's all wide then the front might look a bit weird but you can use them.
@@BeaversHobby For Mr03 front are narrow, rear are wider. Mean I have to buy 2 different sets of 4 tires each pack? Seem I need your advise for selecting a set of tires😊 to play indoor home tiles
@@fwfefrtefdv4719 Yes, in this case you will have to buy 2 sets, one narrow and one wide. As for the shore (tyre number) it depends on the track but generally 30 is good. If you roll over in the corners then tune the suspension first, make the spring stiffer. If it still rolls then you will have to decrease the grip at the front by using a higher number (40). Or increase the grip at the back by using a lower number (20).
![Mini-Z FWD to AWD Conversion [Full Length]](http://i.ytimg.com/vi/IQ2I5hzBRIE/mqdefault.jpg)
![Mini-Z FWD to AWD Conversion [Full Length]](/img/tr.png)
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Time Stamps
Disassemble original RM motor mount: 0:15
Installing aluminium motor mount: 1:27
Dealing with the motor: 3:28
Gear mesh setup: 6:31
Installing oil shock: 9:30
Testing: 11:08
Hm have you looked into hydro dipping a mini-z body anything ?
Could be a great way too redo worn & already painted bodies.
@@Mini-z1994 Thanks for the suggestion. I haven't look it to it yet but I have the NSX that probably need re-furbishing after a few knocks.
i guess it's kind of off topic but does anyone know a good place to stream new series online ?
@Jordan Kenzo Meh I use Flixportal. just google after it:) -brody
@Brody Dariel Thank you, I went there and it seems like they got a lot of movies there =) I really appreciate it!
Ooooo, shiney... pretty... my precioussss. That was some vicarious bolting new stuff to other new stuff loveliness.
I like the Lego technic stand you made, car looks great too
Where the stock suspension connects to the back end of the body, that plastic broke for me. This mounting style looks like a more solid solution than super glue. Excellent video, and thanks for helping me!
The T-bar breaks pretty easily. The rear motor catcher/clip also breaks easily. So far I haven't got any problem with this motor mount yet and it doesn't hit the body I use (The old NSX).
@@BeaversHobby I mean the spring on the top. The plastic support for that in front of the motor mount broke off of the chassis ;-;
Btw, I just got my mini z on Amazon because it was at the price you said was worth it! I got the GT-R R35
@@bryguy6452 There's spare for every part so you should find it pretty easily. Also congratulations on getting one at fair price.
Excited to see your getting back to mini-z!
Great job I love all your videos thanks for your amazing work
Nice video! We just received a lot of new upgrades and parts we are testing on our channel.
great tune!
have u upgraded the tires?`
for tracks like the kyosho ones, get "pn soft" tires for front and "pn super soft" tires for the rear. :)
for carpet its some other ones.
tires make most of the performance of mini z
Thanks for the suggestion. I've just got Kyosho radial 30 degree front and 20 degrees rear but haven't installed them yet.
I run my car mainly on dirty office floor so I'm also looking at GQ foam tyres. I really want to try PN and Marka too.
GREAT VIDEO
very nice video.what type of radio did you use on your MR03?
Right now I'm using Radiolink RC3S hooked up to multiprotocol box. ua-cam.com/video/zJmg_gv34us/v-deo.html
I might change it to Futaba 3PK with multiprotocol box soon.
I'm interested in the lego stand if u can show more info on it and what pieces needed
It's very simple. I just use the pieces I have.
Basically it's Lego Technics, stack in 2 layers and held together with black pecks. The pieces you need are long 5-12 holes and L shape pieces to make it rigid.
Here are some photos so you can adapt it to the pieces you have.
imgur.com/oaH7JV9
imgur.com/iUsKrCT
imgur.com/PPDfgew
imgur.com/xYg3ZXe
ps. It's not the most financially sounded stand because you can get PN Racing foam car stand for about 2-3 Euros but I didn't have to pay for it.
Can you turn this into RWD drift car.
Really difficult because the steering is limited. However if you have 3D printer you can print a new chassis to have enough steering, install all new electronics along with gyro and use just the motor mount from the original car. But that's not really a Mini-Z is it?
Hi. How you connected radiolink with FHSS with mr03 (FHS)?
I use multiprotocol module. Here's the video tutorial. ua-cam.com/video/zJmg_gv34us/v-deo.html
Actually the FHS and FHSS doesn't mean it would connect to each other. It just says "frequency hopping spread spectrum" technique to avoid interference. What makes Tx talks to Rx is protocol.
I forgot to mention Mini-Z FHS is actually FlySky AFHDS protocol. You can use FlySky radio with it too. Here's the tutorial. ua-cam.com/video/fX0REIw1GRA/v-deo.html
motor mount (rm) & (mm) Install instead Can or not. ? (I bought it wrong.) If done. What needs to be changed?
Yes, you can use any motor mount. MM also works with this chassis. Diff is the same as RM. But the wheelbase will change according to the motor mount you use. MM with RM T-plate will start from 102mm wheelbase so you'll have to change the T-plate too to get 98mm wheelbase.
Which body are you going to use it with?
@@BeaversHobby sir yes sir Thank you bro
@@T2EJourney My pleasure.
Hello, could you recommend please good grip max sticky tires of PVC laminate for MR03? I understand that laminat is not the bast surface for non drift car, but it all what I have. :)
Mini-Z radial tyres. It works even on dusty surface.
Use more degrees at the front than back eg. 30 degrees narrow front + 20 degrees wide rear. If the back has more grip it won't spin out easily.
พี่ครับพี่บายสัญญานรีโมทกับ เรดิโอลิงคได้ไงครับ
ใช้กล่อง Multiprotocol วิธีตามนี้ครับ
ua-cam.com/video/zJmg_gv34us/v-deo.html
Wouldn't the carbon fiber you just removed be stronger then the aluminum?
No, the one I need is motor mount and the one I removed is from plastic that has cracked. The plate is graphite and yes, it's stiffer than the one on this aluminium mount.
You know you could buy AAA lipo batteries for that?
Yes, unfortunately my board won't be able to handle it. This is FHS version and it's the weakest one.
Does The mr02 body fit The mr03??
Yes, all of them. Every body fits on MR03 because it can adjust the width of both front and rear.
@@BeaversHobby Thanks for answer 😁
@@lillerikxp My pleasure.
Do you have an install tutorial for ball diff on mr-03 chassis? Or do you have a recommendation on which one to purchase?
Diff is a bolt-on so tutorial isn't really needed. You can also see in this video that I just thread it through and lock it in place with grub screw.
The best one right now is PN Racing (choose according to your motor mount because LM is wider). www.kenonhobby.com/PN-Racing-Mini-Z-MR0203-V3-Ceramic-Ball-Diff-Set_p_42916.html
The one from Mini-Z is great too but a tad more expensive.
Thanks for the info. I recently installed a xspeed motor and I think my diff is toast. 🙄 I expected it to be the first thing to go. I’ll look into the PN racing one. Hopefully I can find a cheaper price than what I’ve been seeing on eBay.. 🤑
Can you provide the link of the car,,, love from🇮🇳
Thanks for reminding me. Here you go.
www.rcmart.com/kits-miniz-c-420_1184.html
Normally you can buy it from local Kyosho dealer but I really should add link for international shop too.
Hi, Racing Radial Tire 30° MZW37-30 1 bag x 4 pieces, can they use on both front and rear wheels?
Yes, you can. Just check if you have the wheels for the width you are going to buy. If it's all narrow then it's pretty standard. Some cars come with all narrow out of the box. If it's all wide then the front might look a bit weird but you can use them.
@@BeaversHobby For Mr03 front are narrow, rear are wider. Mean I have to buy 2 different sets of 4 tires each pack? Seem I need your advise for selecting a set of tires😊 to play indoor home tiles
@@fwfefrtefdv4719 Yes, in this case you will have to buy 2 sets, one narrow and one wide. As for the shore (tyre number) it depends on the track but generally 30 is good. If you roll over in the corners then tune the suspension first, make the spring stiffer. If it still rolls then you will have to decrease the grip at the front by using a higher number (40). Or increase the grip at the back by using a lower number (20).
@@BeaversHobby Thanks for your advise!
mr03ve ผมจะหาซื้อชุด wide ได้ที่ไหนบ้างครับบอดี้ p1 ใส่แล้วล้อหุบมากเลย
ปกติมันจะมีมาให้ในกล่องนะครับ ไม่งั้นก็ซื้อแยกได้เป็นอะไหล่ครับ banzaihobby.com/Kyosho-MZ403
banzaihobby.com/radio-control/kyosho-miniz/mr-03-parts/mz406-front-suspension-arm-set-for-mr-03
banzaihobby.com/Kyosho-MZ502
@@BeaversHobby ผมได้รถมือ2มาครับไม่มีมาให้
@@user-pp6di3vm1g หลัก ๆ คือต้องเปลี่ยน 3 ชิ้นครับ
คันชักกว้าง MZ403 Wide
ฝาปิดล่างแบบกว้าง MZ406 Wide
ฝาปิดบนแบบกว้าง MZ502 Wide
แต่มันขายแยกชิ้นกันตามลิงค์ที่ให้ไปด้านบนเลยครับ
@@BeaversHobby ขอบคุณมากๆครับ
@@BeaversHobby ขอถามอีกสักนิดครับ น็อตที่ใช้กับพวกห้องเครื่องอลูและยึดมอเตอร์นี่มันมีขนาดเท่าไรครับ
No diff?!
No, it can't.
Hey friend i found metal differential and pinion gears for the 1/24 check out my new video