Playing with Sculptris #9 - Japanese Dragon Bust (Part 1)
Вставка
- Опубліковано 20 жов 2024
- I love Eastern Dragons, their faces are always so iconic yet hard to replicate. I particularly like Japanese-drawn Dragons as their expressions always seem more... serious? I went through Google to get some inspiration and see if I could try to capture one of these in a model, the result is not quite what I had in mind but I am enjoying it so far!
Inspiration & Reference - img15.deviantar...
------------------------------------------------------------------
== SOFTWARE ==
The program I used was Sculptris!
pixologic.com/s...
Brushes & Textures are from DeviantArt;
Mega Pack Brushes (bit.ly/28XyWwt) by Strigoi-vii
Dragon Textures (bit.ly/28Xz7HM) by Marqoni
Equipment - Wacom Bamboo Digital Graphics Tablet
------------------------------------------------------------------
== MUSIC & ARTWORK ==
Credits & Artwork were made by me!
Introduction Music - The Land Of The Wizard by Per Kiilstofte
machinimasound...
Licensed under Creative Commons Attribution 4.0 International
(creativecommons...)
Song by teknoaxe
UA-cam - / @teknoaxe
Website - www.reverbnati...
Track - "Breached Skies Extended" - • TeknoAXE's Royalty Fre...
Another amazing creation! :)
Thanks to you i found Sculptris... its amazing
If you were to make the ENTIRE dragon how long would that take?
Days
Have ya ever considered doing spores/busts of beasts from shows like Yu-Gi-Oh! or even Digimon?
Of all the art Ive seen you were the loveliest ;)
Hey darkedgetv,
(or Rebecca if im correct) Your sculptris arts look so amazing to me. I wonder if they are actually 3D printable? (im just askin because we have 3d printers here my university, and under 1year or 2 i should be able to access them, that would be great if i could learn to develop such things like you)
I had watched u make anything in a long time and when I did now again I was so shocked cause I forget how good u r st making thing
could you build with that, even: Slifer the Sky Dragon? :DD
This is very impressive work and a very good Part One. One can't reasonably ask for more due to the fact you are transferring a 2d image into a 3d model and the stylized nature of the image. However, I would have taken more inspiration from the natural features of real life animals and incorporating it more into the model. For example, I would have taken the whiskers of the dragon in the original image and found a real life counterpart, in this case, most likely a catfish. Catfish have a little buildup at the base of their whiskers to the point where there skin is stretched into the whisker. I say they are whiskers instead of hair or feathers because of the nature of the dragon being Japanese.
I would stay away from stylized depictions of eyes and try to sculpt them the best you can akin to real life analogs, mostly because I am afraid you'll get into the habit of undermining your own art with realistic scales and teeth but cartoony anatomy of eyes. I would sculpt the base of the eyes with the buildup of eagle eyes, mostly because they have binocular vision, but detail the pupil and iris with that of a crocodile. Never forget to sculpt the eye lids and some dragons have a nictitating membrane.
Apologies for not replying to this sooner, but thank you very much for the brilliant advice. I'd seen this comment a while ago and tried to use it for my more recent sculptures, especially the eye-tips for my Houndril and Deathwing models. I feel like my eyes have been improved, although a second opinion is more than welcome. Your point on catfish whiskers is something I hope I can remember next time I decide to do whisker-like protrusions.
Again, thank you for the feedback, and to point out that the clash between realism and stylized depictions can be problematic later on, it is incredible helpful!
***** Thank you for your consideration.
3D PRINTERS NEED TO BE ABLE TO PRINT THIS
+Claire Schreurs ...they can...
I THINK I JUST DIED OF AWESOMENESS
have you worked in some dinosaur modeling for programs?
That is pretty cool. Can you try something like head part of Rayquaza or Mega Rayquaza?
Make a Zerg :D (your original desing based on starcraft)
Design Process
According to Samwise Didier, the zerg design process can be summed up as follows:
1) You start with lots of teeth.
2) You choose a troop type:
a) Melee attacker
b) Ranged attacker
c) Flying attacker
d) All of the above (game designers don't like this option, as it's too multi-purposed)
3) Pick a form:
a) Decapod
b) Hexapod
c) Octopod
d) Serpentine
4) Add 2 or more of the following:
a) Poisonous spines
b) More teeth
c) Barbed tails
d) Jagged claws
e) Spiked back plates
f) Insectoid wings
g) Venemous tendrils
h) Bat wings
i) Acidic glands
j) A lot more teeth
5) Choose a name prefix:
a) Rage
b) Omega
c) Spore
d) Ravage
e) Blade
f) Destruct
g) Terror
h) Any other word that sounds violent and exudes overall nastiness.
6) Choose a suffix:
a) -ling
b) -lisk
c) -tor
d) -zor
e) -etc.
Much excite for part 2
Do you use a tablet when using sculptris? or is it by mouse?
dark edge can you help me? ¿how i restart the spore's database?
Who could dislike this?
3 people
Actuellement je fais un musé virtuel sur unity avec des sculpture fais avec sculptris, merci encore de m'avoir fais découvrire ce logiciel :-)
For a start, well it's a start. So it's the best when ti's finished, always, I don't know what to say. *XD*
If you were to make a game, I bet this would be the best bad arse boss in the game.
Damn, that's fancy!
como se descarga el Sculptris!
Does this program cost anything? I would love to use this.
I think it's free
+Marleen S nice
You should make a Spore Playthrough.
Can you do Lao Shan Lung head from Monster Hunter or Gravios head and Yian Garuga head PLS??? ;D
BEAUTYFULL
How do u copy these teeth :I ?
for you it's just playing... WOW
ikrrr
Amazing!!
As good as always
so cool
Please part 2
How much does this software cost?
+David Hebb free
Wow!
Awesome !☺
👍🏻
stunning :^)
why don't you make a dinosaur from ARK: Survival Evolved
At 48 seconds I got how you were making it
Try remaking the first spore you made
But remastered
you do it for fun, for yourself and not for the views am i right
Tutorial plz
"STATE YOUR WISH"
part 2
you very very very good
Coolest
~reeee chaiiiiiin~ REEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
It looks like 3D mottle
omega flowey pls
+Monstarockstar
Someone's done Omega in Spore. I'ts not THAT hard, I'm sure DarkEdge can do it.
+KupKakes yeah
not japan dragon
east asia dragon