Thanks for watching, Jackie! My little town doesn't have one, but some cities have maker's spaces where you can try out different machines. They really are fun.
Thanks Tanyu. Of the diode lasers I have used, I have liked this one the best. The air assist included with this one and the extra power are very nice features.
@@MakingwithMarilyn Anytime you need to move the screen to see what is not visable vs clicking on the hand up at the top. Just hold the spacebar and click and drag the screen with your mouse. I find it way easier.
I don't have suggestions on how to make your projects better; but i can send my blanks to you, you can do the engraving and send my blanks back to me. I think that's a great idea.
Hello, after watching your video. Which I liked very much, I think It was just what I needed to give me that push. Yes, I have a We Create. Yes, it is still in the box. And, yes I have had it ever since April of 2024. I wanted to send it back for some reason. I have looked at a lot of tips tricks video and feeds on lasering. and, still couldn't get up my nerve. I even thought to give it away. and just take the money hit. My husband talked me into keeping it so now it's in the box still. And everyday, I look at it and I think is this the day I take it out and set it up? So I say that, to say this. I enjoyed your video, ease of use and calming encouragement. I hope you do more. Thank You!
I hope you open the box, set it up and have a successful first project. There is a learning curve and trial and error, so give yourself some grace until you get it all figured out. Thank you very much for your encouraging comment!
If you are talking about the jig that holds multiple of the same blank, you can buy jig files or, in my case, I just design them around what I am using them for. A UA-cam channel named SamCraft is who I watched to learn how to make them.
Thank you very much! As for the jig, I watched a youtuber named SamCraft. He has multiple videos on jigs and I made it by watching one of his videos. Here is his channel if you are interested in learning to make one as well. www.youtube.com/@Samcraftcom
I'm actually not sure because I've never touched them, unless I touched them picking up my materials and just didn't think about it. Next time I run it, I will see. Thanks for watching!
I don't cut real thick materials, so I think the 20 watt is a nice module. The higher you go in power, the thicker you can cut, but you can lose some finer details in engraving as you go up in power. Personally, I like the Vista laser over the Vision, but it currently only goes up to a 10 watt module. I believe they will be releasing a 20 watt module for it this year. The Vista's modules are very easy to swap out. I have a 10 watt and a 2 Watt InfraRed module.
I just bought one. Not yet arrived. I have heard the air purifier isn't that good from the FB group. Your thoughts. Will it still leave my house stinky? It gets ugly cold where I live and I want to use this in the house. No basement to get away from anything.
I use the WeCreat air purifier with both of the WeCreat laser. With another laser, I vent out a window. I've been using the WeCreat Vista lately in case you are interested in checking out those videos. Thanks so much for watching!
Thank you for great project ideas! Can you do a video on how you make your jigs?
That jig is fantastic.
Thank you.
wow...that entire video makes me want something new now Marilyn
Thanks for watching, Jackie! My little town doesn't have one, but some cities have maker's spaces where you can try out different machines. They really are fun.
thank you for showing changing colouring for engravings i had been ignoring that feature and didn't realise
@@TheTimmytom7 you’re welcome
Thank you! You are so infomative!
@@patriciarichardson6952 Thank you very much!
Nice machine and projects! Glad you figured out how to get designs centered.
Tracey
Thank you Tracey!
Hey Marilyn!! Thanks for the Tutorial!! Great content!
Thank you.
I need to stop watching you (just kidding) because you make me want to try new crafts! Love the projects, especially the slate and wood ones!
@@2andor4 I totally understand that😅
Amazing Everything is Beautiful especially the BLESSED Great ideas and job Marilyn 🙏
Thank you, Rondrea!
Awesome tutorial Marrrrrilynnnnn. I’m looking into getting a WECREAT. This has helped with my decision. Thanks again❤❤❤
Thanks Tanyu. Of the diode lasers I have used, I have liked this one the best. The air assist included with this one and the extra power are very nice features.
Love them. Thank you. I just unboxed mine. I just subscribed to Creative Fabrica. ❤
I just love my Creative Fabric membership. Thank you for watching!
AWESOME TOOL. EVERYTHING YOU MADE IS NICE.
Thank you!
Just hold the space bar and the hand will come up to pan the screen, and let it go when your done :)
Thank you for letting me know this feature. What part of the process was I at when I could have used this feature? I appreciate it!
@@MakingwithMarilyn Anytime you need to move the screen to see what is not visable vs clicking on the hand up at the top. Just hold the spacebar and click and drag the screen with your mouse. I find it way easier.
I use the space bar to switch between the arrow & the hand tool! Super fast shortcut :D
@@deenabrown3385 oh, thank you so much for sharing that!!! I love it!
I don't have suggestions on how to make your projects better; but i can send my blanks to you, you can do the engraving and send my blanks back to me. I think that's a great idea.
Put them in the box with those tumblers that I'm going to tape for you too🤣 Thanks for watching, Delonda!
TFS…. great job as usual👍🏽
Thank you Nicole!
great video....i wish i had the room for one!
Thank you, Martin!
Hello, after watching your video. Which I liked very much, I think It was just what I needed to give me that push. Yes, I have a We Create. Yes, it is still in the box. And, yes I have had it ever since April of 2024. I wanted to send it back for some reason. I have looked at a lot of tips tricks video and feeds on lasering. and, still couldn't get up my nerve. I even thought to give it away. and just take the money hit. My husband talked me into keeping it so now it's in the box still. And everyday, I look at it and I think is this the day I take it out and set it up? So I say that, to say this.
I enjoyed your video, ease of use and calming encouragement. I hope you do more. Thank You!
I hope you open the box, set it up and have a successful first project. There is a learning curve and trial and error, so give yourself some grace until you get it all figured out. Thank you very much for your encouraging comment!
Excellent Video !!! ❤ Thanks for sharing!!
@@gregbarker30 you’re welcome, Greg.
Thanks for doing this. I can't decide if I want to buy a laser or not. This was very helpful.
You're welcome. Thank you for watching! It is definitely a big decision on whether to get one or not.
Would like to see you make a rubber stamp
Would love to see you engrave a tumbler a goblet and a cup
How do you do the Templates for your project. I saw one that holds pencils but we're you start
If you are talking about the jig that holds multiple of the same blank, you can buy jig files or, in my case, I just design them around what I am using them for. A UA-cam channel named SamCraft is who I watched to learn how to make them.
HEY MARILYN...HERE FR THE REPLAY.
Hi Stacey!!! Thanks for watching.
Hi may I ask where did you get the jig?
I made the file and cut it myself. I learned from a UA-camr named SamCraft. He also sells Jig files. www.youtube.com/@Samcraftcom
You did a great job. How did you make the jig?
Thank you very much! As for the jig, I watched a youtuber named SamCraft. He has multiple videos on jigs and I made it by watching one of his videos. Here is his channel if you are interested in learning to make one as well. www.youtube.com/@Samcraftcom
I this engraver so bad, great tutorials
@@deloriswhite1309 thank you Deloris. I plan to do more tutorials on it in the near future.
Good video thanks looks good
Thanks Jessie!
Thank you
You are very welcome! Thank you for watching.
Hey Marilyn!!! do the grates get hot?
I'm actually not sure because I've never touched them, unless I touched them picking up my materials and just didn't think about it. Next time I run it, I will see. Thanks for watching!
Can u tell me what is better the 20 or 40 if u buy the base one can you add the other tools after you learn how to use them ??
I don't cut real thick materials, so I think the 20 watt is a nice module. The higher you go in power, the thicker you can cut, but you can lose some finer details in engraving as you go up in power. Personally, I like the Vista laser over the Vision, but it currently only goes up to a 10 watt module. I believe they will be releasing a 20 watt module for it this year. The Vista's modules are very easy to swap out. I have a 10 watt and a 2 Watt InfraRed module.
I just bought one. Not yet arrived. I have heard the air purifier isn't that good from the FB group. Your thoughts. Will it still leave my house stinky? It gets ugly cold where I live and I want to use this in the house. No basement to get away from anything.
I use the air purifier with it and it seems to work well for me. I can still smell something, but it's been sufficient. Enjoy your laser!
Thank you for the video! I've been wanting to get one of these machines. Curious question, which air purifier do you use?
I use the WeCreat air purifier with both of the WeCreat laser. With another laser, I vent out a window. I've been using the WeCreat Vista lately in case you are interested in checking out those videos. Thanks so much for watching!
Where did you buy your dog tag ?
I bought them off of Amazon. amzn.to/3C6k6oj
Good evening 😊
Hi Louis!!! Thanks for watching.
Hi Marilyn. I’m getting ready to set my Vision 20W up tomorrow. Where did you get the jig from that you used in the tutorial. Thank you
I made the file and cut it myself. I learned from a UA-camr named SamCraft. He also sells Jig files. www.youtube.com/@Samcraftcom
@@MakingwithMarilyn thank you
Very nice! I might be contacting for assistance
Thanks for watching, Stacey! How has your WeCreat creating been going?
@@MakingwithMarilynI haven’t taken out of the box. I’m trying to make room
Ms. Marilyn, how are you.
Hi Penny! I'm doing well, thanks! I hope you are also?
@@MakingwithMarilyn I'm doing wonderful 😊
❤
Thanks, Uni!
Good evening
Hi Sharon!