Це відео не доступне.
Перепрошуємо.

Fatbike V20 Amsterdam

Поділитися
Вставка
  • Опубліковано 29 чер 2024
  • Fatbike V20 adjusting speed to maximum 45km/ph ❤️❤️❤️ Enjoy! 😊 #amsterdam #fatbike #V20 #speed

КОМЕНТАРІ • 66

  • @Elgaspa1971
    @Elgaspa1971 28 днів тому +3

    hi James, I'm Andrea from Italy,...I also have v20 pro version 3.0 2024, your tutorial is perfect and the speed unlocks without any problem!...I would like to know some more info from you on your computer board, how it can be connected to the smartphone, how it can be updated, what are the other menu items besides 4, what are they for and how are they configured to make the most of the potential of this! finally I would like to know if there is a manual that explains how it works because it wasn't delivered to me with the bicycle, and if you have it maybe in PDF if you can send it to me! let me know thanks!

    • @tour2778
      @tour2778 28 днів тому +2

      I only have the v3 screen on my ouxi v8 but have no bluetooth, for other settings you also need other controller

    • @jamesss1108
      @jamesss1108  26 днів тому

      Hey, thank you for this. I appreciate it ❤️ Going to post it soon ❤️

    • @Elgaspa1971
      @Elgaspa1971 25 днів тому

      very good, I'm waiting for it....

    • @Elgaspa1971
      @Elgaspa1971 25 днів тому

      in the meantime I'll send you what I found on the net, at the moment I haven't been able to make P02 appear, which I don't know what it's for or if it exists, and P03 and for this reason I can't increase from pas 3 to pas 5 in the display ,...I also haven't yet figured out if the display is equipped with Bluetooth to be connected to a smartphone to be updated and therefore I don't know if the H6C can be updated in the firmware!

    • @Elgaspa1971
      @Elgaspa1971 25 днів тому

      - P01: mileage unit, 0: KM; 1: MILE.
      - P02: ? = I NOT HAVE THIS MENU!
      - P03: 0 = 1-3 Top speed 25km/h , 1 = 1-5 Top speed 45km/h
      The default 0 = 1-3 top speed 25km/h/Enter Password = The default password is “1111" = I NOT HAVE THIS MENU!
      - P04: Speed limit setting, default 25km/h
      Enter Password = The default password is “1111" for setting sped until 45km/h.
      - P05: Start mode,default : 0
      0 = zero start,
      1 = non-zero start
      I NOT UNDERSTAND WHAT IS REFERS TO AND WHATS IS DOES!
      - P06: Drive mode, default 2
      0 = Only PAS drive
      1 = Only Throttle drive
      2 = PAS drive + Throttle drive,exists at the same time.
      If it does not have the throttle handbar you must set 0 otherwise the error E 020 will appear on the display
      - P07: Mileage reset + restore factory Settings,
      Press and hold the [+ button] 5 seconds mileage clear
      Press and hold the [- button] for 2 seconds to restore factory Settings.
      - P08: Automatic cruise , default : 0
      0 = automatic cruise
      1 = no automatic cruise.
      - P09: Change the undo password, default : 1111
      Press and hold down [Power button] and [+ button], and enter the old password 1111 at ----. Press and hold down [Power button] and [+ button] at the same time, and switch to example 0000 at ---- to enter the new password.
      Press and hold down [Power button] and [+ button] at the same time to save and exit the password setting.
      - P10: Change the speed display ratio, Default = 100% then the right value is 100.

  • @stefanfianen7866
    @stefanfianen7866 26 днів тому +2

    Hoi. Ik heb een fatbike v20 pro 4.0 h6c scherm. Maar ik weet nou niet hoe ik bij het code schermpje kom. Kunt u mij daarmee helpen? Want nu kan de fatbike alleen maar 25 kilometer per uur, maar ik will hen naar 45 kilometer per uur krijgen.

    • @jamesss1108
      @jamesss1108  12 днів тому

      You just need to press the - and + together for 2-3seconds

  • @user-su3zw2do3r
    @user-su3zw2do3r 16 днів тому +1

    Hello, I have a fatbike V20 Pro 5.0. I bought it yesterday. He doesn't drive more than 25 km. Do I need to change the monitor? It does not enter the settings to enter the code.

    • @jamesss1108
      @jamesss1108  11 днів тому

      What monitor do you have? Same H6C display? If not need to buy it online.

  • @sharfinarif3112
    @sharfinarif3112 Місяць тому +2

    Hi, Can you give the exact link from where you bought your bike v20?
    Thank you.

    • @jamesss1108
      @jamesss1108  Місяць тому

      @@sharfinarif3112 Oh i'll try to search it but it was in dappermarkt

  • @Yemeni_jeff
    @Yemeni_jeff Місяць тому +6

    Kan je nog een andere video maken ik kan niet zien waar je drukt😅

  • @RobertoRomenken
    @RobertoRomenken Місяць тому +3

    Is opvoeren van de v20 pro 2024 ook mogelijk??

    • @ralfverheij5909
      @ralfverheij5909 Місяць тому

      die heb ik ook weet het niet

    • @user-rq2vh8nt9c
      @user-rq2vh8nt9c Місяць тому

      Ja is mogelijk ik heb de fatbike v20 pro 5dagen geleden gekocht

    • @user-rq2vh8nt9c
      @user-rq2vh8nt9c Місяць тому

      Alleen code 1111 werk noet

    • @mckursat
      @mckursat Місяць тому

      @@user-rq2vh8nt9cwat moet je dan doen kan geen codes invoeren

    • @jamesss1108
      @jamesss1108  11 днів тому

      Not sure about that 😭

  •  Місяць тому +1

    Hey. I buy mine yesterday also. Can you explain a bit writing in English how you set it to go faster than 25km and what are the 4 number digits 1111 that you put there

    • @jamesss1108
      @jamesss1108  Місяць тому +1

      Hold + and - together, go to set4, press + to input the code 1111, hold the power button then you can adjust the speed already :) Stay safe 🙏

    •  Місяць тому +1

      @@jamesss1108 did you had when you buy the bicycle at the beginning this error code on the left side of the screen: E 020 error

    • @jamesss1108
      @jamesss1108  Місяць тому

      Didnt have any error with me check my new video

    •  Місяць тому

      @@jamesss1108 I fixed with the error but when I get to set4 I push + but it's not writing any number 1 at all

    • @marcinwar1779
      @marcinwar1779 Місяць тому +1

      You dot show what u doing because you pointed camera in wrong direction by the time u go to that setimgs with numbers 111 . Can u please record new video.

  • @AlbertDeboer-oo9vf
    @AlbertDeboer-oo9vf Місяць тому +2

    Kan je een video maken dat je laat zien waar je op klikt

    • @jamesss1108
      @jamesss1108  12 днів тому

      I made another video, you can see it there ❤️

  • @muttekindje1
    @muttekindje1 Місяць тому +2

    Hoe heb je de begrenzing eraf gekregen???

    • @jamesss1108
      @jamesss1108  12 днів тому

      You need to input the code 1111

  • @leeroyeastside8180
    @leeroyeastside8180 Місяць тому +1

    Yo hello James ik heb gisteren voor me dochter gehaalt precies de zelfde is het mogelijk om deze iets harder te laten rijden gr 👊🏽🤝🏽💪🏾

    • @AllthewayupG
      @AllthewayupG Місяць тому +2

      Kijk wel uit maat niet te hard..

    • @user-tc2oe6pp6u
      @user-tc2oe6pp6u Місяць тому

      Ni verschieten da je dochter dan wat klappen krijgt als ze een ongeluk veroorzaakt he..en dat je genoeg spaargeld hebt ,want de verzekering zal niets dekken als ze een ongeluk veroorzaakt,

    • @jamesss1108
      @jamesss1108  12 днів тому

      Yes, it is on the video how to increase the speed. But please stay safe 🙏

  • @K.A-87
    @K.A-87 22 дні тому +1

    WEET IEMAND HOE JE DAT START LICHT ERAF KRIJGT DIE AUTOMATISCH AANGAAT IN HET DONKER??????????

    • @jamesss1108
      @jamesss1108  12 днів тому

      It is part of it already unless you want to change the whole front light.

  • @karolinaparys3134
    @karolinaparys3134 17 днів тому +1

    Hoe de gashendel te ontgrendelen

    • @jamesss1108
      @jamesss1108  12 днів тому

      My fatbike doesnt have a throttle, only pedal assist

  • @santinofs
    @santinofs Місяць тому +1

    Haha top maar hoe kom je in dat streepjes menu dan? Heb dezelfde maar hij knippert alleen 25 en daarna van alles geprobeerd…

  • @jacques86
    @jacques86 Місяць тому +1

    Pls how you put on screen numbers for code?

    • @jamesss1108
      @jamesss1108  Місяць тому

      @@jacques86 You can use the + and - to put in the code and hold + and - together so you can go to the editing mode.

    • @user-cm6oh8fs3f
      @user-cm6oh8fs3f Місяць тому +1

      Why you don’t let see it , make a full new video mate so people can learn it .

    • @jamesss1108
      @jamesss1108  Місяць тому

      @@user-cm6oh8fs3f I dont know why is the video like that, i had it captured perfectly fine but when i uploaded it, the video is different :(

    • @jamesss1108
      @jamesss1108  Місяць тому +1

      @@user-cm6oh8fs3f check my new video

    • @user-cm6oh8fs3f
      @user-cm6oh8fs3f Місяць тому

      @@jamesss1108 oké

  • @ayoubhalui7243
    @ayoubhalui7243 Місяць тому

    Strijder ❤️

  • @PaulTheTurkish-ny1wc
    @PaulTheTurkish-ny1wc 21 день тому +1

    I hope they ban these as soon as possible. Stupid and illegal, endangering other people on the road.

    • @hsshhs-j6r
      @hsshhs-j6r 21 день тому

      go cry harder 😂😂😂😂

    • @bigHT456
      @bigHT456 19 днів тому

      They cant ban these, there are too many police wont have time to catch REAL criminals

    • @jamesss1108
      @jamesss1108  12 днів тому

      Let's claim it ❤

  • @RobertoRomenken
    @RobertoRomenken Місяць тому +2

    Is opvoeren van de v20 pro 2024 ook mogelijk?