Can only assume he is drilling into wood or some kind of board. If going into brick/concrete you're best offering up the panel and drilling through some pilot holes first. Then put some plugs in.
I'm currently attaching them to a concrete wall at the moment. Cut everything , make sure all is fitting ok. I placed the panel on the wall in it's correct position then drilled through it to mark the location of all the drill holes.take panel away from wall, drill all the holes in the wall, plug it, panel back in position, then screw it all in place. This prevents concrete dust destroying the black felt board which would happen if you drilled plugged and screwed in the one go. Very slow process on your own. Won't be doing again.
How are the screws attaching to the wall? Dont you need a threaded hole first?
Can only assume he is drilling into wood or some kind of board. If going into brick/concrete you're best offering up the panel and drilling through some pilot holes first. Then put some plugs in.
What type of screws did you used?
How well does it reduce the reverberation? What frequencies?
can the panels install without nails, such as silicon glue instead?
Strong adhesive
Hello What type of screws did in the video?
What about concrete wall
Good job 👏
Jesus, that music, I was waiting for the murder to happen
😱🤣
Lmao
Died
If have concrete wall stick with clear silicon
Can these panels attach to a concrete ceiling in the same way as they attach to a wall?
What about the screws that will remain visible is there a way to make them disappear
Use black screws
Use black screws
what is the name of the song in this video?
Is that fixed to a dry wall....
do you have a supplier in Australia??
just go down to bunnings mate
Ok, and now tell us how to install it on German walls please
The same questions and know one answers anything is concrete wall did he make the holes first nothing 🤷♂️
I'm currently attaching them to a concrete wall at the moment. Cut everything , make sure all is fitting ok. I placed the panel on the wall in it's correct position then drilled through it to mark the location of all the drill holes.take panel away from wall, drill all the holes in the wall, plug it, panel back in position, then screw it all in place. This prevents concrete dust destroying
the black felt board which would happen if you drilled plugged and screwed in the one go. Very slow process on your own. Won't be doing again.
😮❤😅
The fact people ask about the holes suggests they are absolutely clueless
Probably the reason they’re asking mate
Sorry Mr. Perfect
@@Oxygen97 . Clown 🤡
And the only way we don't stay clueless is by asking questions to learn from those who know...
@@Oxygen97. Did mummy drop you on your stupid head little boy.
No US option to buy?