How To Troubleshoot Rachio Smart Sprinkler System Zone Fault No Water Or Dry Run
Вставка
- Опубліковано 13 вер 2024
- Hello Everyone My Self Baljit Johal
Whether you're a beginning artist, a practical do-it-yourselfer, or a professional craftsman, my videos will provide a how-to guide to great projects. I will show you the tools, plans, and tips to bring art and design to your home.
Follow Me On Facebook:-
/ jkhandyman00420
Follow me On instagram :-
/ baljit00420
For more information go to my website :- johalbaljit.wi...
_________
Advertising, partnership inquiries, or commissioned projects, please email
email : johalbaljit7@gmail.com
any question please leave in comment box Or visit my website:-
johalbaljit.wi...
Thank u for sharing the great info
nice sharing
Thanks for sharing
I have four zones that does not work, ones of them is a main line that is connected with two zones, one of them works but the other zone doesn't. All of them shows flashing blue without any red. The valve is a tiny circle without anyway to open the water manually, there is a lot of dirt in there and it's nearly buried with grass, I was thinking that it may be the connection. What should I do in this case? Please help.
To open manually you can spin coil counter clock wise one have wire
If you think have dirt than most likely you need to flush out you can turn off main water and remove coil completely than turn main water on for 2-3 minutes hope it will work otherwise you have to change whole valve
Hello Mr. Jolal; I have a zone that has extremely low water pressure. The water is trickling out of the sprinkler heads and only shooting out about 6 inches. Can you please assist me in trouble shooting this problem? Thank you, sir.
First you need to see if main line have enough pressure - you can tell if you have more than one zone tied to same main line all other have pressure than that is not issue
Second you can open that zone manually see if you got pressure if yes that means your coil is bad not opening properly if not your valve is faulty or plugged need to replace whole valve
@@baljitjohal Thank you!
All my zones light up blue like it is running, but none of the stations are working. I can manually turn on each station and it works fine. Any suggestions?
What you meant manual like from app or from physically valve?
If from valve than you 1st need to check voltage on coil one of zone is showing running on app if you have voltage,
Most common for all station all sharing negative 24v positive comes from controller accordingly the zone on
Also when system running all lights flash in breath mode
What if the flashing is blue like it's working but no water?? Can you help please
When is flashing blue but no water if coil bad it will goes red and send you notifications about zone not watering
But if is flashing blue still not water than cupel things can happened
First check water flow if there is water pressure you can spin coil with hands to check
If manually working it might have bad connection wire need to check both end it properly connected to controller and to coil
I forgot to maintain when it is flashing blue just check which zone it will be flashing on one of zone that will tell you
@@baljitjohal I got it fixed by spinning the coil. That was the problem. Thank you for helping us. Bless you
Don't put tape on a solenoid!!!