How to Wire MK3 Heated Bed Aluminium for 3D Printer

This is a MK3 Aluminium heated bed for a 3d printer. it has a dimension of 220x220 milimeters and a thickness of 3millimeters. it can be used with both 12volts and 24 volts power supply
in this video, i will show you how to wire this aluminium heated bed to use it with a power supply of desired voltage, so lets get started.
there are 3 terminals on the heated bed marked as 1 2 and 3. the wiring is pretty simple. when using a 12 volts power supply, you need to connect pin 1 to ground and pin 2 and 3 to 12 volts
and when using a 24 volts power supply, connect pin 2 to ground and pin 3 to positive 24 volts
i will be using a 24 volts power supply with the heated bed so i will be connecting pin 2 and 3 accordingly
#DIY #3dprinting

[@ViseshMinerva]

Do you use heat gun to pre heat the plate before soldering....!?

[@Giovanni2862]

Is it possible to reach temperatures above 100°C?

[@cpace123]

I think you have it reversed pin 1 is normally postive 2 and 3 negative

[@viniciusborges5276]

Man that solder hurt my eyes

[@SuperbTech]

kindly note that the heated bed is made of aluminium, it is difficult to heat the contacts as the whole plate acts as a heatsink

[@bukszpryt_]

fits perfectly with voiceover that hurts ears,

[@xecarfa9755]

I'm searching for a 12cm cubed or a 15 cm cubed heated bed but I'm unable to find it in india does your website import it?

[@faizsidd9039]

Hello bro Aap ke pass jo dell ka laptop hai yo konsa model hai dell laptop ka please muje batao muje laina hai hand writing machine chalane ke liye please reply jarur dena

[@RICKEBUENO89]

Poor quality soldering. Must increase temperature. Try using a heater first.

[@Silverfox0786]

That soldering was aweful

[@SuperbTech]

the heated bed is made of aluminium, it is difficult to heat the contacts as the whole plate acts as a heatsink

[@ponsaravanan]

@@SuperbTech Heating the contacts /bed before soldering helps melting a lot better than whats in the video. Please try if that helps