Thnx, just did mines! The second one was easier than the 1st of course. Smh gotta make sure you have enough slack in the wires so when you connect they don't slip out
Thanks for this video man, helped me out a lot on my install. Especially Alex’s tip on just putting the wires in the pig tails. I did not want to cut wires. 👍🏼
I'm hust wondering after you stick the wires into the pigtails thingamajigers do the wires hold, is there some kind of locking mechanism i have mine wanna install right now
Bout to do these as my first mod. Also found some aftermarket reps of the updated front foglight garnish that I might try. Couldnt find the rears for the sedan.
Wait, how did you plug the socket back in 5:47, if you just plugged the wire directly to the harness (no splicing/TTap)? Won't the thickness of the wires prevent you from plugging it back into the socket? Or you'll damage the LED reflector wires, trying to plug the harness back?
hey man, I installed mine today using your video and it was a great help, I was wondering I ran into some problems after I installed which now my SYSTEM BREAKS and some other lights turning on and when I try to drive the car it won't let me shift to any gear(yet the car is On working fine)
That’s odd, disconnect the negative terminal from the battery for a couple minutes then reconnect it. Go for a 10 min drive then turn the car off and on and see if that helps
I’m back did all that battery removing therm I already but didn’t work it was just a the stoping light fuse had gone bad switched it all my problems gone and car looking nice !
I have a 2013 civic si and i recently installed the led reflectors and they work but only when i come to a stop and use my turn signals. There is a problem to that which is my tail lights. My tail lights aren’t on at night and i had people flash at me from behind since my tail lights are out. Can anyone tell me how to fix this?
I didn’t get these exact lights, but some other brand from amazon. The apparently kept blowing fuses in my civic so I had to get my car serviced. Anyone know anything that might help?
Just installed mine and my running rear lights don't work. The blinker and the brake lights work but nothing will allow the running taillights to turn on. And now my front side marker lights aren't working 😢
hi guys i live out here in canada, and my mechanic warned me that i should not install the rear bumper sequential lights because of the snow and salt hitting those areas, causing electrical and corrosion issues. any one has any thoughts or feedback on the validity of this claim? thanks
Bro I just ordered mine on Amazon just now. Coming in tomorrow. Can't wait. The wiring on the video wasn't super specific. So my question is the wires that go from the lights to the tail light pigtails. You just stick the wires accordingly into the pig tails then just clip the other part back together? No splicing or cutting into the original wiring at all?
Hey man great videos first off. I just bought a new civic and wanted to know where a good shop is in the GTA to install the mods especially shocks/springs
Recommend to change the rear bulbs to LED too. basically i changed all the rear bulbs to LED(signal, brake and reverse). Its much brighter and the signals goes off and on and does not fade like the filament bulbs
This video is really helpful! I'm trying to do this to my civic as well. Are the two screws easy to find? I can't find the screws anywhere along the backside of where the reflector is
how has the wiring hold up since you didn't splice into the actual wires of the harness? Im about to set up mine and I wanted to see if this a pretty secure/easier method to doing things lol
Hey, big fan of your videos! How did you do this without splicing. You make it seem like there are naked ports on these connectors you can just jack the wires into. Is that all? No quick splicers necessary? Cause all the vids I've watched they're using quick splicers.
Are you just gonna stick in the wire into the pig tails (wiring hole)? If so, how long the wire holds with your everyday driving? Is there any locking mechanism to hold the wire so it won't fall off?
@@zmohp.2060 I did mine the same way, it was hard to push them down to lock them in. After a week of driving, one of my turn signlas stopped functioning. Not sure why. This method is easier than splicing but i myself ran into a problem.
Have to remove the whole bumper to remove the honeycomb garnish there is a hidden screw that the garnish is attached to the bumper and the only way to remove the garnish is to remove the whole rear bumper
I spent hours trying to figure this out. strip them back about a 1/4 inch each and when you plug them in, it won’t be as thick so it’ll prevent them from breaking and or falling out of the hole.
These looks amazing should have came from the factory like this!
Wait..sooo...he didn't splice into any wires...? And just shoved the wires into the connectors? And they won't disconnect? Did I miss something? 😳
I was wondering the same thing lol
thanks got mine in took less than 30 mins looks so much better its the little things in life
Totally agree!
Thnx, just did mines! The second one was easier than the 1st of course. Smh gotta make sure you have enough slack in the wires so when you connect they don't slip out
Thanks for this video man, helped me out a lot on my install. Especially Alex’s tip on just putting the wires in the pig tails. I did not want to cut wires. 👍🏼
For the 2020 model there is no need to remove the screws. Just take the pannel of and it's open
Just did mine yesterday! Amazing job! Makes the car 100% better at night! 🙏 🙏
Totally agree, thanks for watching!
I'm hust wondering after you stick the wires into the pigtails thingamajigers do the wires hold, is there some kind of locking mechanism i have mine wanna install right now
@@ChrisLowpes ?
@@londellmalone5414 not understanding the question.
Bout to do these as my first mod. Also found some aftermarket reps of the updated front foglight garnish that I might try. Couldnt find the rears for the sedan.
Very helpful video. Mine just arrived and I can't wait to install.
Thanks for watching!
Can't wait for that ABS dynamics diffuser! I'm becoming a little impatient to get mine😬
JOVTECXTV I missed the first launch of it. I have to wait until it’s restocked
Hey do you have to connect all the wires for it to work? I tried connecting 1 wire to see if it worked and nothing happened.
Is there a way to test the reflector before installing just to make sure the reflector actually works.
How it is after one year? Any problems with it?
they look good, tsh sharing this step.
Wait, how did you plug the socket back in 5:47, if you just plugged the wire directly to the harness (no splicing/TTap)? Won't the thickness of the wires prevent you from plugging it back into the socket? Or you'll damage the LED reflector wires, trying to plug the harness back?
You have to trim enough of the plastic around the wire to clear. It’s a snug fit but it works great
Question, if you add them to the pigtail the way shown on the video, doesnt that interfere with the pigtail fitting into the tailight?
Did you ever get an answer anywhere else?
So the wires aren’t in the way when plugging them back into the housing connectors?
Can someone takes some measurements of these reflectors for me? I need overall height and width (across the wider section). Thanks!
hey man, I installed mine today using your video and it was a great help, I was wondering I ran into some problems after I installed which now my SYSTEM BREAKS and some other lights turning on and when I try to drive the car it won't let me shift to any gear(yet the car is On working fine)
That’s odd, disconnect the negative terminal from the battery for a couple minutes then reconnect it. Go for a 10 min drive then turn the car off and on and see if that helps
Hey wassup got the same problem just now did you figure it out ? Also thanks Mr.Lopes for the video!
I’m back did all that battery removing therm I already but didn’t work it was just a the stoping light fuse had gone bad switched it all my problems gone and car looking nice !
Nice I order some right now.
Looks real sharp man..well done.
Thank you!!
I have a 2013 civic si and i recently installed the led reflectors and they work but only when i come to a stop and use my turn signals. There is a problem to that which is my tail lights. My tail lights aren’t on at night and i had people flash at me from behind since my tail lights are out. Can anyone tell me how to fix this?
ouuuu IM SOLD!!! going to pick them up! Keep it going bro!
I didn’t get these exact lights, but some other brand from amazon. The apparently kept blowing fuses in my civic so I had to get my car serviced. Anyone know anything that might help?
Same here. One of my turn signals stopped functioning.
Just installed mine and my running rear lights don't work. The blinker and the brake lights work but nothing will allow the running taillights to turn on. And now my front side marker lights aren't working 😢
Would you recommend installing these if you plan on getting some taillights later on
hi guys i live out here in canada, and my mechanic warned me that i should not install the rear bumper sequential lights because of the snow and salt hitting those areas, causing electrical and corrosion issues.
any one has any thoughts or feedback on the validity of this claim?
thanks
bump
Did you ever do it?
@@gosulanre6669 yuppppp... and it has been ok so far.. just ask the mechanic to use extra sealant around the corners and cables
@@gstreetboi thank you very much for replying. Really appreciate it! I’ll be doing this then
Looks amazing!
André Valentim thanks!
Bro I just ordered mine on Amazon just now. Coming in tomorrow. Can't wait. The wiring on the video wasn't super specific. So my question is the wires that go from the lights to the tail light pigtails. You just stick the wires accordingly into the pig tails then just clip the other part back together? No splicing or cutting into the original wiring at all?
Aye just double checking, works with 2017 Honda Civic Sport hatchbacks (assuming manual doesn’t make a difference) ?
Hi Chris are those still working? Because I heard that they could not last to long.
Is anyone else getting these warning signals after installing the lights? I got mine from amazon?
Does anyone know if this this work on 2017 hatch normal model not sport?
Hey Chris I was wondering where you got your exhaust from. I am looking into getting an exhaust for my own civic and I like the sound of yours.
Looks good I want to copy
Very nice
They look good. I'm going to get them. How hard was it 1 to 10?
Hey man great videos first off. I just bought a new civic and wanted to know where a good shop is in the GTA to install the mods especially shocks/springs
I’d say check out Kevin Mercer I believe you can contact him through Instagram @mercerbuilt
Recommend to change the rear bulbs to LED too. basically i changed all the rear bulbs to LED(signal, brake and reverse). Its much brighter and the signals goes off and on and does not fade like the filament bulbs
Have you had an issues since upgrading to LED?
@@ofwgthaidgaf 2 years with no issues
Nice ive done my headlights and fogs so far looks 1000x times better. May have to do the rears next. Also wanted to do some on the inside as well.
U are my motivation bro
Really appreciate it! Thank you!!
Definitely interesting🤔 idea to do to mine
Hey Chris, wondering if you know how to take off the reflector from back panel for 2020 hatchback? I’m having hard time, pls n ty
I’m pretty sure the steps are similar but you have additional screws to remove. I’ve seen someone do it on UA-cam so try searching up to confirm!
This video is really helpful! I'm trying to do this to my civic as well. Are the two screws easy to find? I can't find the screws anywhere along the backside of where the reflector is
Yea they are pretty easy to find, it’s just a tight location for the top screws
@@ChrisLowpes got it thanks!!
In the UK rear reflectors are a legal requirement.Are they not where you are?
These look great
Thanks!
Is there a way to get these in non sequential?
Hey Chris, liking what you've done to your si so far 🔥👌🏽. Is this exclusive for the si sedan model or will it fit the hatchback trims as well..?
It will fit the hatchback as long as you have the same style rear bumper and thanks!
Hey Chris great video! But I noticed they same thing on my tail lights the chip part. Did you just use touch up?
Hey thanks and yes I did!
Did you splice into each wire ?
Does this fit the civic si coupe? It doesn’t look like it would but on eBay it is saying it will?
Definitely won’t fit. Been hunting for a coupe version but no luck. Been seeing there’s way more mods for sedan/hatchback than coupe
how has the wiring hold up since you didn't splice into the actual wires of the harness? Im about to set up mine and I wanted to see if this a pretty secure/easier method to doing things lol
Yea I haven’t had any issues to date surprisingly
Will this fit on the EX hatchback? I love the sequential look
It will fit as long as it’s the same style light
What color wires went to what?
@chris Lowpes will these fit on my 2019 Honda Civic sport HATCH?
Mine isn't SI. will it still fit?
So you just leave those wires in there and plug it like that they don’t get torn or in the way?
daniel cordoba yea as long as you trim enough of the plastic you’ll be ok just make sure to double check before re installing it
Chris Lowpes And by plastics you mean the insulation around the wire right? Just making sure don’t want to do anything stupid 😂
@@DCvenomfang yes, so that you get a better fit when ypu plug it in.
Hey, big fan of your videos! How did you do this without splicing. You make it seem like there are naked ports on these connectors you can just jack the wires into. Is that all? No quick splicers necessary? Cause all the vids I've watched they're using quick splicers.
Check out minute 4:53, we put the wires into the plug and connect them to the car, also thanks for watching!!
@@ChrisLowpes how did you do that? removing the wires from the pigtail?
Will this void the warranty?
Ugggh so I installed these, the left one works, the right one comes on but doesn’t brake or turn signal, gonna have to return and try again lol
Would this fit on the ‘20 hatch sport?
As long as the rear bumper is the same it will
Any damage on the paint when you pry open the vents?
I personally had a little mark but nothing major
Looks good man! Hey what kinda of Mic set-up do you have for your camera? looking to up my audio game. Thanks.
Hey man, I’m using a rode mic
Do they have something like this for the coupe si?
I’m sure somewhere on eBay
Will it work if you have an aftermarket tail lights?
It should just make sure u do the wiring right
anyone else getting the issue where their turn signal flashes rapidly?
Sick bro!
Thanks bro!
Is it hard to do the wiring for the bumper deflectors? Cause it seems like is not a quick connect or a disconnect thint :(
Preço dos LEDs?
I have mugen rr and I have ep3 too
Damn I wish I knew you could just stick the wires in the pig tails! I wired mine which took a lot longer!!
Are you just gonna stick in the wire into the pig tails (wiring hole)? If so, how long the wire holds with your everyday driving? Is there any locking mechanism to hold the wire so it won't fall off?
Same thing I was thinking
@@zmohp.2060 I did mine the same way, it was hard to push them down to lock them in. After a week of driving, one of my turn signlas stopped functioning. Not sure why. This method is easier than splicing but i myself ran into a problem.
What’s the name of the song?
I want these for my type r.... but they're actually illegal in the UK as you have to have the reflectors on the back... 😑
The reflectors are useful if you are in the dark with the car turned off and you don’t want to be rear ended
@@TheDetrity exactly (they're a legal requirement for parked cars).... do you know if they reflect when not in use?
They don't work on the 2021 SPORT model. The light is way too loose, even with a screw.....
I don’t understand
best way to get a short. all those exposed harnesses smh
What do you mean
idfk how on earth you got the honeycomb panel off. my plastic clip remover snapped before i even got a single clip out
i also broke half the clips so now the panel is loose and still hasn’t came off
Have to remove the whole bumper to remove the honeycomb garnish there is a hidden screw that the garnish is attached to the bumper and the only way to remove the garnish is to remove the whole rear bumper
Do they fit non SI and 16?
david rolon it will only fit the same bumper as mine.
will these work on a sedan?
It’s installed on a sedan
No way! I tried it and the wires did not go back onto the sockets. Only way is to cut and spice the wires. Lmao
It’s a little tricky but it does work, I still have it like that to this day!
@@ChrisLowpes same here. It does work!
Are there any sequential tail lights yet?
Yes I believe companies make them
Suma Performance makes a set , at least for the hatchback…
cool
Thanks!
I had the same issue with the right side light chipping the paint. Horrible paint by Honda
How TF did you manage to plug them back in? I tried and I cannot do it to save my life
I spent hours trying to figure this out. strip them back about a 1/4 inch each and when you plug them in, it won’t be as thick so it’ll prevent them from breaking and or falling out of the hole.
Make sure to hit that notification button to stay up to date with all video!!
Did you remove the battery for this installation?
Carlo James Calem no I didn’t
Blue plug white= red
Gren plug white= yellow.
Black plug white = green
Any plug black = black
I blacked mine out
I added 3M double sided tape just in case 😏
10th gen Si’s are trash. Base model pos
Jeeeeez so much hate. What did the 10th gen Si do to you 😂
Would these fit on a 2021 civic hatchback?
tried it on 2021 civic hatch for some reason they don't work not sure if I wanna splice it tho
Will these fit the 2018 Civic Sport?
You need one specific to the sport