Ppf Jo log nhi lagaya hai wo logon ko nhi pata hoga bhai. Saalon saal ek jaise rehta hai, apna gaddi me lagaye hai abhi to ka best decision maanta hoon.
Dear Biturbo your information is way far from correct. You should be cautious while making such videos. Here are the answers your incorrect points. PPF: Opening parts: If you are going to get ppf installed by a noob for a cheaper quote maybe then he won’t be able to fix parts properly. A professional with great experience would never let such things happened. PPF Yellow: cheaper quality ppf made with mixed of pvc with tpu material or tph with tpu may turn yellow. But high quality brands which ppf roll costs for approx 40,000/- above and 100% tpu won’t turn yellow. It would hardly make a slight change in colour and that also you won’t be able to see on non white cars. Price: any ppf roll below the cost of inr 35,000 is not worth to get installed on your car as informed above. But roll above this cost can be considered good for 3-4 years although companies give 5 years life. Any roll of upto 50-60k should be good enough for minimum 5 years and that though with self healing of upto 2 years and gloss and protection for 5 years. Application cost should be from 10-15k depending upon expertise of installer. And every studio would charge approx 20-25k for getting this job done with highest possible standards which includes paint correction (also on new car) and responsibility for coming years (means warranty). Accident on PPF: in many cases ppf protects the paint and itself where in impact was not too deep. For example car used on roads which has bushes on the side. Swirl marks and deep scratches happening during daily cleaning which turns black cars into kind of greyish tone. Denting cheaper than ppf: but what about quality of denting painting ? OEM finish is barely possible to achieve even by service Center’s. Only few talented professionals can achieve good finish but they charge a lot higher than what you said. Self healing life: baar baar scratch padne se self healing khatam nahi hoti bhai (hey bhagwan) it depends upon material if the materials top layer is hard then it would self heal for approx 2-3 years if your usage is approx 25-30k kms per year. Self healing life reduces when you clean your car in rough manner . Slowly by time self healing layer gets removed due to rough cleaning just like we get our paint rubbed to remove scratches and that process removes few microns of paint. If you clean your ppf with spraying water and gently you can increase self healing life. Also if ppf material is cheaper and self healing layer is soft. Then it would stop self healing in approx one year . But still you have your glossy ppf which is protecting paint. PPF removing paint: 5 rs main Kaua biryani hi milegi. Bhai Jab ppf lagwane jaate ho toh sabse sasta rate dhoondte ho. Quality nahi. Search for quality material . Lagwa kahin se bhi lo. But material should be 100% TPU and of well known international brand. All these ppf with the names of guard, ultra, shine, dragon etc etc are absolute garbage. Some good brands are - NAR, Bremen, Saint Gobain, Lumar, Avery Dennison, Xpel , Stek. Ceramic coating: Only good gloss and hydrophobic effect lasts as per usage. I have seen hydrophobic effect lasting for 1 and half year where car was driven hardly 12000 kms always parked inside and always washed with Ph neutral shampoo. I have also seen same coating hydrophobic effect lasting only 2 months because car use to go for normal foam was which is alkaline in nature and car is parked outdoors . But that does not mean coating is not on vehicle if hydrophoc effect stops. You can again get hydrophobic effect with ceramic boosters. Use them as maintenance after every month. DIY ceramics: bhai kuch bhi guide kar rahe ho. Proper professional coating require paint correction job before putting on any coating. Main job is paint correction coating is just a sealant. But it requires tempreature 20-27 degrees where ever it’s getting installed and humidity level should be below 50% for best results. Padhai likhai karo ias yas bano kin chakkro main pade ho bhai ?
I have been using kits from amazon since the last 3 years and it seems to work wonders. Really no point in investing in PPF when I'm also paying for bumper to bumper insurance to cover every damage on the car. It's India and gadi agar niklegi to thukegi, scratch padegi...it's inevitable. Bike wala, Van wala, Rickshaw ka kaam hi hai ye. What I do is I wait for a few months for some major damage to happen and then get everything fixed under insurance. Koi showpiece toh hai nahi, kaam ki cheez hai. Scratch padna hi hai kuch bhi bol lo. Bekaar ke hai ye saare paint protection investments. Great video as always 🙌🏽🙌🏽
Ppf have become a way to attract clout for certain youtubers which is why there price has inflated so much and this has also created a lot of misconceptions amongst people.
Firstly you make great videos and they are very informative. Please make a video on car after market accessories. I have heard people saying your warranty voids, Insurance clams are rejected because of this. Seen the video makes of these car accessories shops, they open all doors and change steering wheels and enabling features like cruise control , does it effect locks quality and what about coupler to coupler fitting clams coz we never really know what are they gonna do with wirings. Those base to top conversions are getting popular these days
All recent base models are featureless. Also need a grasp on which are the features we should get installed. I want things like 360 camera, rear wiper, better speakers, cruise control etc. , but not sure from insurance and quality perspective if these changes should be made.
I spent approx 3 lakh on 3M 200 gloss self healing + ceramic infused PPF, from 3M car care showroom. After 1 year , self healing + ceramic properties stopped working. 3M Company Did not even provide warranty claim, and put the blame on customer - that car was not washed properly. PPF is total Scam. If 3m is this bad , others will be much worse. It may sound unbeleivable , But truth is bitter. The 3M car care showroom opened/dismantled my brand new Audi's parts like doors , dickey , side mirrors etc.. and some parts were opened without my permission , as many customers cancel the ppf deal if they are told that their brand new car parts will be opened/dismantled. From that day, side mirror keeps making noise and dickey get stuck many times and does not open. So guys, Just get full body rubbing if you want to remove swirl marks, whenever the car goes for service once a year, nothing else to be done. Otherwise You will pay huge money for harming your car + wasting your time and money.
Bhai same here 3M is simply cheating but that does not mean all brands are bad. I have been using other brand since last 2 years and it’s perfect. Infact I got that done in my 2nd car too. Pls DM me if any confusion.
Thanks for giving an honest opinion. Car manufacturers make products after extensive research. Don't know how people rely more on roadside shops for detailing and accessories
I’m not sure where you’re getting your information, but I’ve been detailing in Canada for over three years, specializing in paint protection film (PPF) applications. The way we handle PPF is both advanced and effective, and it’s very different from what you’ve described. Yellowing is no longer an issue with quality PPF, as long as it’s maintained properly-just like any other protective layer. PPF is specifically designed to protect your paint from rock chips, not to guard against major scratches. If your previous experience hasn’t met these standards, I’d recommend finding a detailer who understands the current best practices.
Bro your condition are quite different than what it is in India ......rock chips are too common moreover there is no civics sense of car length gaps here it's bumper to bumper in traffic so rubbing from a two wheeler is a weekly basis affair and no cares for insurance for a rub ........morever India recieve sunlight for 8 months that is more less perpendicular to surface so it's a different affairs between India and Canada ...I guess whatever was spoken here is quite relative to India.
You live in Canada dude where there's barely UV rays If i am spending 1.5 lakh, it better be a one time investment instead of me maintaining it all the time.
Teflon and wax don’t offer protection but enhance the gloss finish of the vehicle. Ceramic coating apply krte time paint to properly clean krke indoors mein lagana chahiye in a relatively colder temp. 9h hardness ceramic/ graphene coatings are expensive if done by a professional with right tools. PPFs are a better option for ORVMs, and door scuff plate area, and bumpers. As there are the areas which get most scratches.
@ yes, it’s a time taking process. But can be done easily at home. You can also try turtle hybrid’s spray ceramic coating or of any other brands. It’s easy to do, lasts about 6 months and is inexpensive.
I apply Teflon costing on my car every 6 months. It is more than enough for a normal person. My car is 6yrs old and still shines like new ❤️ no need to waste money on ppf
Sir what a timing, abhi apki hi dostcast pe apki podcast dekh raha tha. I would suggest everyone to watch that podcast,that's too informative for all ❤
@@vedantwkr if a youtuber runs a channel making numerous videos about why ppf is useful, how great his ppf quality is etc and promoting them, indirectly convincing you to get one for your car, while you know the product itself is overpriced, useless waste of money as stated in the video, it is a scam. Looks like you need to rewatch the video my friend.
Glad someone spoke about tearing down a new car for applying PPF. Would break my heart to see my car like that. Also it does not make sense to spend 10-15% of car value on PPF, I would consider it for cars over 45-50 lakh on road price.
Your videos are really informative....I really love them....I have noticed how structural they are like first you start like an introduction then a lot of information without any cringe or going off topic...and then in last everytime there is a conclusion which everytime is like very sensible no nonsense.. really appreciate it keep doing this bro❤️
Rat mesh has just one problem, your car's chassis will be drilled for the screws to hold the SS mesh. This can cause early rusting of your car. If you want to install rat mesh in your car, get your chassis drilled, after that get anti-rust protection done and then install the mesh.
People should understand why PPF is important for your car. It saves your from minor scratches. Easy to maintain your car from dust and easy to clean your car and shine as new car. Main point is it saves you from stone chipping on highway which damage your car paint. And the main point it save your car paint from bird dropping which will be acidic and damage your car paint. I have experienced in bird dropping case where my car parks in open parking and because of bird dropping my paint got damaged 😢 and cracks took place in the shape of bird dropping. This is the reason PPF is important to apply. It acts like screengaurd to your car
Thermoplastic Polyurethane (TPU) which is part of PPF sheet is a polymer that can yellow upon exposure to sunlight, mainly due to photo-oxidative degradation. This process is driven by ultraviolet (UV) radiation from the sun, which breaks down the chemical bonds within the polymer. In the presence of oxygen, UV light accelerates oxidation. The reaction can be summarized as follows, where R represents polymer chains: RH (polymer)+O2→UV R• (radical)+HO• (radical) . This radical HO is what causes degradation and yellowing of the polymer. As everyone would have noticed, melamine plates that we use in Kitchen turn yellow after a year or two, it's because HO radical has been formed.
Ppf provides the best protection out of all applications. I've ppf in my bike and after 1 and half years I've not a single scratch and no yellowing on my bikes paint
@@zub07 there is difference between ppf on bike and a car. Bike is a compact thing usually parked inside homes and most of the time away from direct sunlight while on the other hand most of the people who own cars doesn't have parking space and they most of the time park outside their homes exposing them to direct sunlight.
I have alto 800 which is 11 year old. No coatings at all and still working fine, I am not going for reapinting because it has only 4 year validity left. I believe cost of repainting is less and it provide effective solution.
finally someone said it..! idk how are educated people are falling for a scam like PPF, spending lakhs on your car for just protection from minor scratches is literally so stupid.. i would rather paint the whole panel in fraction of the cost... infact painting the whole car would cost less.
@@saurabhkesharwani6143 I use the Graphene coating by ShineX Pro. 1. Wash your car. 2. Wipe it dry. 3. Apply the ShineX Pro spray & wipe it off. Make sure to not apply when vehicle is hot or where there is sunlight. You can do it monthly or once in 2 months
Teflon coating itself is a scam, most service providers just apply car wax and sell it as teflon coating, doesn't usually last more than a couple of months.
8:52 completely agree with you. An extra anti-rust coating layer may require in moist regions. However, you didn't criticised about the applicators and service providers, like you did with PPF service providers. Car bodies, exhaust, braking system, drive shaft, links, lines must be properly covered, but shops generally don't make such preperations. Hot exhaust covered in coating may result in fire. Improper application may also result in general servicing the vehicle.
Conclusion is you should only do three things: 1. Ceramic: Khud kar lo. 2. Anti Rust: Bahar se karwa lo. 3. Rat mesh: Bahar se lagwa lo. From reading comments, chaho to: 1. Amazon se car care kits combo le lo. 2. Get bumper to bumper insurance to cover every damage on the car.
*I really respect your view & follow your content BUT as an Offroader cum SUV owner - i can confirm a superior quality PPF (1.9 Lac) makes a hell & heaven difference on car body* Totally worth it🤞🏼
I've been following Larry from AMMO NYC for a while, and I've never seen him apply ppf on the whole car. He always applies it only on the bonnet and front side panels.
Usue simple handwash gel, water and a good scrub. Keep car under cheap plastic cover to avoid dust. Wax polish once in a while- its good exercise too! Concentrate on a good running engine, rather than these expensive ultra high gloss.
You are a legend for uncovering this scam… I always wondered why people even bother about ppf on 20-30 lakh rupee car. Unless you are buying a high end luxury car near 1-Cr.. ppf doesn’t make sense as a percentage of the car cost..
When I bought my new car I ordered a ceramic liquid for 1800rs, watched some 10 videos on application and later I only appled it. Noe its more than a year and the coat is still intact. Now I have purchased Turtle ceramic wax for 2000rs which can be applied for 10 times and one application lasts for 5 months. I have been applying this wax for my both cars and they are perfect. Ceramic/wax is only for protecting paint from UV rays, oxidation and bird droppings, it cannot protect paint from scratches
Use Turtle ice seal n shine. Do it yourself, if you care for your vehicle. You can’t prevent scratches happening on India roads but you can choose to be a good driver.
PPF can be done on front bumper, bonnet and on ORVMs if the car is being driven majorly on highways to prevent any minor damages from small pebbles. Ceramic only if one wants a glossy hydrophobic finish. Teflon / wax is the best in terms of VFM considering cost vs protection preposition.
Exactly..this ppf shit is crazy.. people are buying cars in emi that to hatch back thn applying ppf which is 10 to 15% of the car. Repainting dents and scratches makes more sense thn ppf...and tbh i have never seen a car with a higher resale value because of ppf.
For those suggesting that painting is a better option than PPF (paint protection film), consider this: how many times would you repaint your entire car just to fix minor swirls, scratches, iron contamination, or oxidation? These issues are recurring and cause continuous wear on your car's finish. Repainting every time simply isn’t practical. And let’s be clear: repainting will not give you that original factory finish and gloss. Some might suggest paint correction as an alternative, but how often can you actually perform paint correction? Every layer of paint has a limited thickness, so multiple corrections are not sustainable. The primary purpose of PPF and ceramic coating is to provide daily protection from environmental damage like oxidation and minor scratches, helping to maintain that showroom-quality finish over time. . Detailing is for people who truly care about their cars and want to preserve them at their best.
Finally, somebody spoke up. I'm an automotive paint dealer based in Gurgaon and I completely agree with the guy. PPF is a waste of money, you guys can go with the ceramic/graphene coating. It's a good investment, doesn't cost much and does the job well. The wax doesn't stay for long (a week to a month) and requires a lot of effort if you decide to do it on your own. Overall, ceramic or graphene is suitable and the best option available at present.
@saurabhkesharwani6143 you need a little bit of experience to operate a rotary polisher. Take your vehicle to any nearby car wash, they'll apply the wax for you. Tho, you can buy one for yourself but be careful with the rpm's, even experts sometimes mess up.
I got a PPF applied recently but for me the reason was entirely cosmetic. My car is around 4 years old and I wanted it to be a bit different so I went for a repaint and a matt chrome ppf which actually made my car look more beautiful.
Anti-rust has a fundamental flaw. The mechanic/detailer that applies the coating, does not clean the underbody thoroughly. There is existing dust in the underbody over which they apply the anti-rust. That kinda defeats the purpose of it.
Then that's not Anti-rust's flaw, it is the fault of the detailer. But I think if you tell them or guide them beforehand or go to a skilled and experienced detailer, this shouldn't be an issue.
kudos bro , very true & helpful topic to car community you chosen , dont know why people is crazy about ppf nowdays , it is not worthy of your single penny guys , dont fall on that self healing & coating gimmicks
Guys, in my opinion, don't waste your money on any 3rd-party services (PPF, Ceramic, Teflon, etc.) right after getting a new car. Brands deliver cars that are built to withstand regular use, so spending extra on these services doesn’t make much sense. At the end of the day, it’s just a metal box that helps you travel. Drive carefully, but don’t overly prioritize it. If there were a product you could apply to your skin to prevent aging, I’d recommend spending on that instead! Also, in my opinion, avoid putting a cheap seat cover on your car. Enjoy the soft, cushy new seats for a few years. Covering them with a mediocre cover is like preserving them for the next owner when you sell it. Just use your car as you wish... Enjoy it ! After 5-6 years, get it detailed for around 5-10k, and it’ll feel like new again. Aim to use your car long-term to reduce unnecessary waste.
Jo bhi ye video dekh ke rat mesh lagane ka soch ra h to 2 cheez ka dhyan rakhein - rubber washer/tape aur locktite zaroor use karvae. Varna kaafi rattling ki awaaz aa sakti h. Even washing machine me bhi rattling ki awaaz aati h agar mesh ke sath washer na lage.
Log jeb wagera kuch nhi khol rhe , companies mei EMI TERMS kaafi easy kr rkhe hai , jiski vajah se ye sab ho rha hai aaj , especially in luxury brands..... 85% of luxury brand cars are in EMI TERMS
Brother ceramic coating/ graphene coating life also depends on how it gets maintained too. Teflon is a banned product and no more available in market. It’s a scam now of someone sells u Teflon Nano coating is not advisable to apply just like that. Spray form coating which gives a quick coat and gloo can be considered as a DIY coating. But a concrete coating always depend on a passionate and professional Detailer nearby.
It’s a very good analysis. Regarding PPF, it is useful for expensive and off road vehicles. Ceramic quoting will not give you protection as PPF. Ceramic quoting will not save your car paint from small stone chips. Good quality PPF applied by professionals will be a good for cars, specifically if you are doing more off roading. You can also use semi PPF Quoting and rest nano ceramic quoting. (Like bumpers can have PPF, rest ceramic.) Yellowing will certainly be a problem with white cars, but will hardly affect other colors. Nowadays PPF comes with anti yellowing formulas. All in all, whether it’s nano ceramic , PPF or Teflon, if you give it to some roadside vendor with no proper expertise, he will surely ruin your car. This is one service which should have no compromise on quality of work or material. Rat mesh is one thing I am certainly considering applying in my car. I was not aware of this.
I agree the PPF is costly, they asked me 1.5lac for my Honda City 2022 and I opted for Ceramic Coating considering the high cost OnRoad and the PPF 1.5 was out of my budget. Unfortunately, within 2 months, my car door panel got a big deep scratch that is soo long that I cannot cover it up without a complete repaint. I regret not getting the PPF. I wish we had long lasting PPF to justify the cost associated with it.
PPF can't avoid deep scratch, PPF is scam if you run car in bumper to bumper traffic. I wasted 1.7L on PPF. My car got scratches from a MCD truck and i have to to claim insurances and then again paid for PPF.
I know someone who has around 10-12 cars in his garrage and non of his cars have ppf on it yet all his cars are in good condition. He just parks his cars under shade and takes good care of them.
I disagree that PPFs (Paint Protection Films) are a scam for the most part. I own a black Verna Turbo that I purchased last year. Initially, I was hesitant about PPF due to its price and the lack of authenticity signs. One seller in Andheri was offering Garware PPF with an 8-year warranty for 55k, while another quoted 97k. I decided to contact Garware directly, and they provided a list of nearby authorized detailers. I ultimately went with one of them for 80k. The reason I chose PPF was that my car is black, which requires extra care. I wasn’t fully aware of this since it’s our first car. During regular driving-over 14,000 kilometers-I noticed many stone chips, swirl marks, and minor scratches from cats in my society, as I’m a cat feeder. They often climb on the car and wait for me. Lastly, since this is our first car, I have emotional attachments to it, and I wanted to give it the best care possible. I also don’t plan on selling it anytime soon
@@33_chaitanyagadkari64 Brother here the math Suppose one of the ur bumber got damaged., thn cost of repainting the bumper will be cheaper thn some high end films. When you go to sale your car its very unlikely Someone will be paying you a premium for the ppf, Even a minor repainting on dents before selling will do the job. Ppf makes only sense on luxury cars where cost of repainting is very high in dealers.
I live in Mumbai, and every alternate weekend, I visit Lonavala. There, stone chipping is as common as Maganlal chikki. I believe that repainting reduces the resale value of a car. Beyond just resale, repainting is never the same as the original paint because the first coat is applied by a machine, while subsequent layers are applied by workers, leading to noticeable quality differences. But why be so negative ki ye hoga vo hoga? let's be realistic: if a car is driven on the road, something is bound to happen eventually. Should we avoid using the car out of fear? I also asked about the charges for replacing a section of paint protection film (PPF) if it gets damaged. He quoted ₹450 per square foot for that service.
@ just a suggestion - ceramic coating n all from niche companies is fine but if ever planning for a ppf go for reputed brands. Aegis has lifetime warranty but what if he goes out of business in few years? Phir kya karega lifetime warranty ka?
@annoynommus yeah, but that's the point, you would've to paint a accidental car eitherway, PPF don't protect the paint from major accident. Why bother putting PPFs on C segment cars.
I disagree on the PPF. My points are as follow: 1. Instead of looking at the actual cost of application, think in terms of percentages. For example if a car costs 1Cr, a 1L PPF is only 1% but for a 10L car, thats 10%. So dont go by absolute value of the application but look at the ratio. The cost of repainting a panel in a GLE is not the same as that of a verna or city. 2. Consider this. A german brand or an expensive car is more likely to spend long time waiting for parts at the workshop as compared to a mass market product. The service center is NOT going to take care of your car and is going to lie in their yard for weeks. Consider bird droppings as a BIG problem as these can burn through ceramic coat as well as clear coat and make permanent marks on expensive paints. PPF fairs better here. I have had first hand experience when the starter motor in my X3 burned out prematurely and the vehicle spent 3 weeks at the yard. The car had just been freshly ceramic coated but when I got my car back I had bird marks all over the bonnet. It was so disheartening 3. Ceramic/ Teflon are shams. They last only a few washes and get back to original state in a few months. 4. Forget self healing - If the PPF is thick enough it can save your from minor brushes. When I got my GLE (coming from X3) I was not used to the size difference. Just as I was driving out of PPF shop, I had a minor brush on the front left and the Rift taxi had some good scratches. I was pleasantly surprised to see that the PPF took up the entire brunt of the damage. I decided to not get it fixed as you can never be sure in bangalore. However the resale value of the vehicle - esp for luxury/ exotic ones - is totally dependent on the touches you make. 5. Lastly most luxury car dealers or high end vehicles offer PPF service as part of their internal offers. This is to ensure that trained people open up the vehicle. Yes, you pay a lot more but think about how much expensive it will be if something were to go wrong. Cheers
Perhaps true. Need to balance cost of car vs cost of application. Then it also depends on air particles and rain (like dust and salts) and harshness of the sun. Based on these, the plastics can deteriorate faster… considering basic chemistry.
In india 🇮🇳 substandard quality is a part of day to day life, in every walk of life it is the same! This automotive accessories market is so much flourished now yet our roads are f****ed up all over lol 😂 we now get toxic airs to breath & no one gives a damn … 😂
00:59 Aur isiliye main iss Video main Batana Chahta Hu Ki Kaise Ek Sahi Bachhe Ko pehchane jo PPF ke bare main sabse zyada jaanta ho..aur Galat Bacche se Baat Karke Apna keemti Samay barbaad na Kare...kyunki Bacche kuch bhi bolte hain..jhoot bhi Bahut Bolte hain...unhe Farak nahi Padta...Lekin main Ek ladke ko Janta hu jiska Naam "Farak" hain but woh Padta hain. Btw Geat Video brother..one of the few honest channels ❤😊
I differ with your on the anti rust coating. If the anto rust is not done on a totally dry & clean surface, it becones the cause of rusting as it locks the moisture & dirt in!
I am a car detailer and i do have a opinion. Paint thickness has to be measured and when cut polishing the car. And when washing it. Just spray soap the car and then just pressure wash it. That’s it.
I own a Hatchback the time i bought it i was researching about ppf. And finally decided to not apply. I saved my 50k. Because its been 5years & almost every year i claimed insurance of my car. And some panels were replaced. Can’t imagine i cost i would have to bare to get that ppf applied to those panels again & again.
And yes ceramic coating do work but only if it's done by a professional and with genuine products. Otherwise the effects fade away in a week-month or 4-5 car washes and proper care.
Hats off to your audacity man for speaking on this scams but on the other hand influencers like @arunpanwar and @anmoljaiswal are endorsing the ppf companies. One needs guts to speak against these ppf giant companies. Hats off to you and thanks for being so truthful and being a real automotive influencer.
DIY( Do it Yourself) Instant ceramic coating ❤are best for middle class ! Prices are geniune aprox. 1399/- & shine like Professional coatings . Durability up to 180 days . 200 ml bottle last for 3-4 applications. Easy to apply ! Better than Waxes.. #instantceramic
I personally appreciate your all efforts for your informative videos, Bhai my humble request to you that please make a video on after market infotainment(music and touch screen with navigation) system for whom haven't or want to upgrade there existing company given infotainment system.
Nice video. But for people who are planning to keep car for long time PPF makes total sense. Resale value goes down drastically if original paint quality is deteriorated. PPF will protect that plus avoid minor scratches and also swirl marks are not as much on PPF when compared to a non PPF car
4:00 sahi kaha bhaiya. Agar aapka budget 1.5lakh ki PPF ka to mat lagwao. Gaadi ko chalne do Bina ppf k scratches aur dents k baad bhi kisi professional workshop me original paint bhi karwaye to 70-80k ka kharcha aayega aur gaadi fir new ho jayegi. Aur agar ppf lagane k baad koi accident hua to ppf k paise alag aur paint k paise alag..
I think you are the only channel who spoke truth about PPF
Exactly 💯💯
Yes 👍
Ask Carguru Also Saying in His Live Session
6yr and still my ppf is not yellow
Ppf Jo log nhi lagaya hai wo logon ko nhi pata hoga bhai. Saalon saal ek jaise rehta hai, apna gaddi me lagaye hai abhi to ka best decision maanta hoon.
Finally someone addressing the real automobile scam
Dear Biturbo your information is way far from correct. You should be cautious while making such videos. Here are the answers your incorrect points.
PPF:
Opening parts: If you are going to get ppf installed by a noob for a cheaper quote maybe then he won’t be able to fix parts properly. A professional with great experience would never let such things happened.
PPF Yellow: cheaper quality ppf made with mixed of pvc with tpu material or tph with tpu may turn yellow. But high quality brands which ppf roll costs for approx 40,000/- above and 100% tpu won’t turn yellow. It would hardly make a slight change in colour and that also you won’t be able to see on non white cars.
Price: any ppf roll below the cost of inr 35,000 is not worth to get installed on your car as informed above. But roll above this cost can be considered good for 3-4 years although companies give 5 years life. Any roll of upto 50-60k should be good enough for minimum 5 years and that though with self healing of upto 2 years and gloss and protection for 5 years. Application cost should be from 10-15k depending upon expertise of installer. And every studio would charge approx 20-25k for getting this job done with highest possible standards which includes paint correction (also on new car) and responsibility for coming years (means warranty).
Accident on PPF: in many cases ppf protects the paint and itself where in impact was not too deep. For example car used on roads which has bushes on the side. Swirl marks and deep scratches happening during daily cleaning which turns black cars into kind of greyish tone.
Denting cheaper than ppf: but what about quality of denting painting ? OEM finish is barely possible to achieve even by service Center’s. Only few talented professionals can achieve good finish but they charge a lot higher than what you said.
Self healing life: baar baar scratch padne se self healing khatam nahi hoti bhai (hey bhagwan) it depends upon material if the materials top layer is hard then it would self heal for approx 2-3 years if your usage is approx 25-30k kms per year. Self healing life reduces when you clean your car in rough manner . Slowly by time self healing layer gets removed due to rough cleaning just like we get our paint rubbed to remove scratches and that process removes few microns of paint. If you clean your ppf with spraying water and gently you can increase self healing life. Also if ppf material is cheaper and self healing layer is soft. Then it would stop self healing in approx one year . But still you have your glossy ppf which is protecting paint.
PPF removing paint: 5 rs main Kaua biryani hi milegi. Bhai Jab ppf lagwane jaate ho toh sabse sasta rate dhoondte ho. Quality nahi. Search for quality material . Lagwa kahin se bhi lo. But material should be 100% TPU and of well known international brand. All these ppf with the names of guard, ultra, shine, dragon etc etc are absolute garbage. Some good brands are - NAR, Bremen, Saint Gobain, Lumar, Avery Dennison, Xpel , Stek.
Ceramic coating: Only good gloss and hydrophobic effect lasts as per usage. I have seen hydrophobic effect lasting for 1 and half year where car was driven hardly 12000 kms always parked inside and always washed with Ph neutral shampoo. I have also seen same coating hydrophobic effect lasting only 2 months because car use to go for normal foam was which is alkaline in nature and car is parked outdoors . But that does not mean coating is not on vehicle if hydrophoc effect stops. You can again get hydrophobic effect with ceramic boosters. Use them as maintenance after every month.
DIY ceramics: bhai kuch bhi guide kar rahe ho. Proper professional coating require paint correction job before putting on any coating. Main job is paint correction coating is just a sealant. But it requires tempreature 20-27 degrees where ever it’s getting installed and humidity level should be below 50% for best results.
Padhai likhai karo ias yas bano kin chakkro main pade ho bhai ?
No brotomotive hurts 😂
Sir tyre mey puncture aaya hey
Brotomotive- pura panel change karna padega🤣🤣
Those are very arrogant and insulting bunch...
brotomotive: ye to dhoti khol raha hai
Detailing bulls also
@@manojpaudel3460 🤣🤣
You saved my ₹15000. Thank you brother 🙏
Then join his Channel and take his premium subscription
Scooty main ppf ki bat nahi horahi hain😒
scooty pe lamination hoti jai2
Ppf cost goes upto 1.5 lakh depending on size fortuner will be more than that
You forgot 1 zero bro 🤔
I have been using kits from amazon since the last 3 years and it seems to work wonders. Really no point in investing in PPF when I'm also paying for bumper to bumper insurance to cover every damage on the car. It's India and gadi agar niklegi to thukegi, scratch padegi...it's inevitable. Bike wala, Van wala, Rickshaw ka kaam hi hai ye. What I do is I wait for a few months for some major damage to happen and then get everything fixed under insurance. Koi showpiece toh hai nahi, kaam ki cheez hai. Scratch padna hi hai kuch bhi bol lo. Bekaar ke hai ye saare paint protection investments. Great video as always 🙌🏽🙌🏽
What about no claim bonus? I get 40% discount due to no claim bonus
40% is less than goodPPF cost also you can easily get bumper etc repainted at a low cost.
@@normalstranger6482It’s only good for the cars whose value is above 50lakhs
What kits ??
@@callingbell-ix5se car care kits combo
Like scratch remover, wax, dashboard polish, car shampoo and other stuff
Ppf have become a way to attract clout for certain youtubers which is why there price has inflated so much and this has also created a lot of misconceptions amongst people.
Biturbo media must open its own workshop 😅
I think also!
It is a very capital intensive business.
No. Vegans shouldn't be in Meat Market.
Explain@@anshmishra3525
Actually kholna chahiye
Firstly you make great videos and they are very informative.
Please make a video on car after market accessories. I have heard people saying your warranty voids, Insurance clams are rejected because of this.
Seen the video makes of these car accessories shops, they open all doors and change steering wheels and enabling features like cruise control , does it effect locks quality and what about coupler to coupler fitting clams coz we never really know what are they gonna do with wirings. Those base to top conversions are getting popular these days
Yes it's true, I couldn't get claim for one of my flooded due to aftermarket parts
Agree 👍
All recent base models are featureless. Also need a grasp on which are the features we should get installed. I want things like 360 camera, rear wiper, better speakers, cruise control etc. , but not sure from insurance and quality perspective if these changes should be made.
I spent approx 3 lakh on 3M 200 gloss self healing + ceramic infused PPF, from 3M car care showroom. After 1 year , self healing + ceramic properties stopped working. 3M Company Did not even provide warranty claim, and put the blame on customer - that car was not washed properly. PPF is total Scam. If 3m is this bad , others will be much worse. It may sound unbeleivable , But truth is bitter. The 3M car care showroom opened/dismantled my brand new Audi's parts like doors , dickey , side mirrors etc.. and some parts were opened without my permission , as many customers cancel the ppf deal if they are told that their brand new car parts will be opened/dismantled. From that day, side mirror keeps making noise and dickey get stuck many times and does not open. So guys, Just get full body rubbing if you want to remove swirl marks, whenever the car goes for service once a year, nothing else to be done. Otherwise You will pay huge money for harming your car + wasting your time and money.
Bhai same here 3M is simply cheating but that does not mean all brands are bad. I have been using other brand since last 2 years and it’s perfect. Infact I got that done in my 2nd car too. Pls DM me if any confusion.
Yes BRO I totally agree
Yes removing car parts is the worst thing they do
Thanks for your feedback. Its really helpful ❤
Thanks for giving an honest opinion. Car manufacturers make products after extensive research. Don't know how people rely more on roadside shops for detailing and accessories
I’m not sure where you’re getting your information, but I’ve been detailing in Canada for over three years, specializing in paint protection film (PPF) applications. The way we handle PPF is both advanced and effective, and it’s very different from what you’ve described. Yellowing is no longer an issue with quality PPF, as long as it’s maintained properly-just like any other protective layer.
PPF is specifically designed to protect your paint from rock chips, not to guard against major scratches. If your previous experience hasn’t met these standards, I’d recommend finding a detailer who understands the current best practices.
Bro your condition are quite different than what it is in India ......rock chips are too common moreover there is no civics sense of car length gaps here it's bumper to bumper in traffic so rubbing from a two wheeler is a weekly basis affair and no cares for insurance for a rub ........morever India recieve sunlight for 8 months that is more less perpendicular to surface so it's a different affairs between India and Canada ...I guess whatever was spoken here is quite relative to India.
You live in Canada dude where there's barely UV rays
If i am spending 1.5 lakh, it better be a one time investment instead of me maintaining it all the time.
Teflon and wax don’t offer protection but enhance the gloss finish of the vehicle.
Ceramic coating apply krte time paint to properly clean krke indoors mein lagana chahiye in a relatively colder temp. 9h hardness ceramic/ graphene coatings are expensive if done by a professional with right tools.
PPFs are a better option for ORVMs, and door scuff plate area, and bumpers. As there are the areas which get most scratches.
Good point! 👍🏼
Should one but a buffing machine for home use for wax? Can anyone do it? 🤔
@ yes, it’s a time taking process. But can be done easily at home. You can also try turtle hybrid’s spray ceramic coating or of any other brands. It’s easy to do, lasts about 6 months and is inexpensive.
@@Moonlight-zp5rj okay! 👍🏼
Thank you for replying! ☺️
I apply Teflon costing on my car every 6 months. It is more than enough for a normal person. My car is 6yrs old and still shines like new ❤️ no need to waste money on ppf
What's the price??
Actually there is no teflon coating..the derailers are buffing the car and waxing it.😂
@@infinitebeing1119 I was expecting this response from Biturbo Media. Sad to see this omitted.
There is nothing called teflon coating
Sir what a timing, abhi apki hi dostcast pe apki podcast dekh raha tha.
I would suggest everyone to watch that podcast,that's too informative for all ❤
Brotomotive guy is a biggest scam
LoL 😅
You are right
The biggest scam😂
Scam until you don't know what's the point of video 😂
@@vedantwkr if a youtuber runs a channel making numerous videos about why ppf is useful, how great his ppf quality is etc and promoting them, indirectly convincing you to get one for your car, while you know the product itself is overpriced, useless waste of money as stated in the video, it is a scam. Looks like you need to rewatch the video my friend.
I have used Graphene coating on my motorcycle it has been 8-9 months now and I'm more than happy and satisfied.
Just like sunroof is not for our country, PPF and Ceramic coating has become a craze without any logic but only ornamental
Glad someone spoke about tearing down a new car for applying PPF. Would break my heart to see my car like that. Also it does not make sense to spend 10-15% of car value on PPF, I would consider it for cars over 45-50 lakh on road price.
Why would it break your heart? The car is fully dissassembleable and reassembleable.
Great video .. Fully agree with your thoughts about PPF, i think with the same cost a person can easily get his/her car fully repainted.
Your videos are really informative....I really love them....I have noticed how structural they are like first you start like an introduction then a lot of information without any cringe or going off topic...and then in last everytime there is a conclusion which everytime is like very sensible no nonsense.. really appreciate it keep doing this bro❤️
No drama, no hype, just truth...thank you brother
Rat mesh has just one problem, your car's chassis will be drilled for the screws to hold the SS mesh. This can cause early rusting of your car. If you want to install rat mesh in your car, get your chassis drilled, after that get anti-rust protection done and then install the mesh.
Highly INFORMATIVE video. I watched several PPF/Ceramic coating videos, but this one is top notch with direct yes or no answers.
People should understand why PPF is important for your car. It saves your from minor scratches. Easy to maintain your car from dust and easy to clean your car and shine as new car. Main point is it saves you from stone chipping on highway which damage your car paint. And the main point it save your car paint from bird dropping which will be acidic and damage your car paint. I have experienced in bird dropping case where my car parks in open parking and because of bird dropping my paint got damaged 😢 and cracks took place in the shape of bird dropping. This is the reason PPF is important to apply. It acts like screengaurd to your car
cost is a factor dude
Very honest and informative. Keep up the good work of enlightening car owners.
Thermoplastic Polyurethane (TPU) which is part of PPF sheet is a polymer that can yellow upon exposure to sunlight, mainly due to photo-oxidative degradation. This process is driven by ultraviolet (UV) radiation from the sun, which breaks down the chemical bonds within the polymer.
In the presence of oxygen, UV light accelerates oxidation. The reaction can be summarized as follows, where R represents polymer chains:
RH (polymer)+O2→UV R• (radical)+HO• (radical) . This radical HO is what causes degradation and yellowing of the polymer. As everyone would have noticed, melamine plates that we use in Kitchen turn yellow after a year or two, it's because HO radical has been formed.
Awesome!! You've cleared confusion of thousands and thousands of people. All the best. Keep it up.
Teflon coating is a big scam😅
do ceramic one, Teflon is cheaper doesn't means it's a scam
Ppf provides the best protection out of all applications. I've ppf in my bike and after 1 and half years I've not a single scratch and no yellowing on my bikes paint
@@zub07 how much you spend on ppf and whats your bike cost
@@zub07 there is difference between ppf on bike and a car. Bike is a compact thing usually parked inside homes and most of the time away from direct sunlight while on the other hand most of the people who own cars doesn't have parking space and they most of the time park outside their homes exposing them to direct sunlight.
@@Aka_768 I've dominar 400 and my ppf cost was 8k with 5 years warranty. And on cars ppf cost is around 80k for 5 years warranty.
Honesty radiates from your face while you speak. it's a rarity nowadays that youtubers are doing social cause like this, thanks Bhai
I have alto 800 which is 11 year old. No coatings at all and still working fine, I am not going for reapinting because it has only 4 year validity left. I believe cost of repainting is less and it provide effective solution.
Tu garib hai bhai
@HelloUserss bilkul, aap sahi keh rahe hain
deserves a subscribe for such good information, I was about to get this done but I am so glad I saw this
finally someone said it..! idk how are educated people are falling for a scam like PPF, spending lakhs on your car for just protection from minor scratches is literally so stupid.. i would rather paint the whole panel in fraction of the cost... infact painting the whole car would cost less.
Exactly. Simply get the whole car repainted after 5 years. Premium paint jobs would cost you the same.
This channel is legit... An encyclopedia for car lovers
He knows nothing, he is misleading
I use a DIY spray ceramic coating which costs around 1200. Works great. A bottle lasts for almost a year.
Would you share more details?
Which company's spray, how to apply and what to watch out for, etc.?
@@saurabhkesharwani6143 I use the Graphene coating by ShineX Pro.
1. Wash your car.
2. Wipe it dry.
3. Apply the ShineX Pro spray & wipe it off.
Make sure to not apply when vehicle is hot or where there is sunlight.
You can do it monthly or once in 2 months
@@saurabhkesharwani6143 I use the ShineX Pro graphene coating spray.
But keep note to apply it when the vehicle is cool, in a shaded place.
Teflon coating itself is a scam, most service providers just apply car wax and sell it as teflon coating, doesn't usually last more than a couple of months.
8:52 completely agree with you. An extra anti-rust coating layer may require in moist regions. However, you didn't criticised about the applicators and service providers, like you did with PPF service providers. Car bodies, exhaust, braking system, drive shaft, links, lines must be properly covered, but shops generally don't make such preperations. Hot exhaust covered in coating may result in fire. Improper application may also result in general servicing the vehicle.
I love how your videos address such important issues in the automotive industry, please keep going!! Kudos to ur team as well!
Conclusion is you should only do three things:
1. Ceramic: Khud kar lo.
2. Anti Rust: Bahar se karwa lo.
3. Rat mesh: Bahar se lagwa lo.
From reading comments, chaho to:
1. Amazon se car care kits combo le lo.
2. Get bumper to bumper insurance to cover every damage on the car.
He he! ☺️
You read most of the comments! 👍🏼
*I really respect your view & follow your content BUT as an Offroader cum SUV owner - i can confirm a superior quality PPF (1.9 Lac) makes a hell & heaven difference on car body* Totally worth it🤞🏼
I've been following Larry from AMMO NYC for a while, and I've never seen him apply ppf on the whole car.
He always applies it only on the bonnet and front side panels.
Thats what we do in dubai
Usue simple handwash gel, water and a good scrub. Keep car under cheap plastic cover to avoid dust. Wax polish once in a while- its good exercise too!
Concentrate on a good running engine, rather than these expensive ultra high gloss.
You are a legend for uncovering this scam… I always wondered why people even bother about ppf on 20-30 lakh rupee car. Unless you are buying a high end luxury car near 1-Cr.. ppf doesn’t make sense as a percentage of the car cost..
I have done PPF, it does help in preventing minor scratches.
When I bought my new car I ordered a ceramic liquid for 1800rs, watched some 10 videos on application and later I only appled it. Noe its more than a year and the coat is still intact.
Now I have purchased Turtle ceramic wax for 2000rs which can be applied for 10 times and one application lasts for 5 months.
I have been applying this wax for my both cars and they are perfect.
Ceramic/wax is only for protecting paint from UV rays, oxidation and bird droppings, it cannot protect paint from scratches
Which brand’s ceramic coating did you use?
Use Turtle ice seal n shine. Do it yourself, if you care for your vehicle. You can’t prevent scratches happening on India roads but you can choose to be a good driver.
Rat Mash seem like is good solution. I had to spend almost 50K due to rat bites.. even had to get the Catelyic converter changed as well.
Bro keep it up. Content clarity is excellent. I will show this to anyone buying a new car.
PPF can be done on front bumper, bonnet and on ORVMs if the car is being driven majorly on highways to prevent any minor damages from small pebbles.
Ceramic only if one wants a glossy hydrophobic finish.
Teflon / wax is the best in terms of VFM considering cost vs protection preposition.
Should one buy a buffing machine for home use for wax? Can anyone do it? 🤔
You are giving the best possible knowledge on the Car maintenance.. Kudos ..Keep it up
Exactly..this ppf shit is crazy.. people are buying cars in emi that to hatch back thn applying ppf which is 10 to 15% of the car. Repainting dents and scratches makes more sense thn ppf...and tbh i have never seen a car with a higher resale value because of ppf.
For those suggesting that painting is a better option than PPF (paint protection film), consider this: how many times would you repaint your entire car just to fix minor swirls, scratches, iron contamination, or oxidation? These issues are recurring and cause continuous wear on your car's finish. Repainting every time simply isn’t practical.
And let’s be clear: repainting will not give you that original factory finish and gloss. Some might suggest paint correction as an alternative, but how often can you actually perform paint correction? Every layer of paint has a limited thickness, so multiple corrections are not sustainable.
The primary purpose of PPF and ceramic coating is to provide daily protection from environmental damage like oxidation and minor scratches, helping to maintain that showroom-quality finish over time.
. Detailing is for people who truly care about their cars and want to preserve them at their best.
Exactly, these repainting people won't understand this.
Finally, somebody spoke up. I'm an automotive paint dealer based in Gurgaon and I completely agree with the guy. PPF is a waste of money, you guys can go with the ceramic/graphene coating. It's a good investment, doesn't cost much and does the job well. The wax doesn't stay for long (a week to a month) and requires a lot of effort if you decide to do it on your own. Overall, ceramic or graphene is suitable and the best option available at present.
Good point! 👍🏼
Should one buy a buffing machine for home use for wax? Can anyone do it? 🤔
@saurabhkesharwani6143 you need a little bit of experience to operate a rotary polisher. Take your vehicle to any nearby car wash, they'll apply the wax for you. Tho, you can buy one for yourself but be careful with the rpm's, even experts sometimes mess up.
@@gandharvsharma4429 okay!
So what happens if I mess up, would it scratch the body? 🤔
@@saurabhkesharwani6143 You can accidentally remove the paint from the edges.
@gandharvsharma4429 Oh! I see! 😮
Thank you for replying! 👍🏼
I got a PPF applied recently but for me the reason was entirely cosmetic. My car is around 4 years old and I wanted it to be a bit different so I went for a repaint and a matt chrome ppf which actually made my car look more beautiful.
Paise basane ke liye base model lete or bad mein Dil khol ke after market mein psisa uddate 😂😂😂
That's why I used PPF only on the outer panels. It's cheap, less time consuming, no mis-alignment. I'm sharing my humble opinion.
Anti-rust has a fundamental flaw. The mechanic/detailer that applies the coating, does not clean the underbody thoroughly. There is existing dust in the underbody over which they apply the anti-rust. That kinda defeats the purpose of it.
👏
Then that's not Anti-rust's flaw, it is the fault of the detailer. But I think if you tell them or guide them beforehand or go to a skilled and experienced detailer, this shouldn't be an issue.
kudos bro , very true & helpful topic to car community you chosen , dont know why people is crazy about ppf nowdays , it is not worthy of your single penny guys , dont fall on that self healing & coating gimmicks
Guys, in my opinion, don't waste your money on any 3rd-party services (PPF, Ceramic, Teflon, etc.) right after getting a new car. Brands deliver cars that are built to withstand regular use, so spending extra on these services doesn’t make much sense. At the end of the day, it’s just a metal box that helps you travel. Drive carefully, but don’t overly prioritize it. If there were a product you could apply to your skin to prevent aging, I’d recommend spending on that instead!
Also, in my opinion, avoid putting a cheap seat cover on your car. Enjoy the soft, cushy new seats for a few years. Covering them with a mediocre cover is like preserving them for the next owner when you sell it. Just use your car as you wish... Enjoy it ! After 5-6 years, get it detailed for around 5-10k, and it’ll feel like new again. Aim to use your car long-term to reduce unnecessary waste.
I agree with you 100%, car is a consumable item, not an everlasting thing unless it is a unique car.
Unfortunately this view is lost on the new generation who goes into crazy debt to "own" a flashy lifestyle.
Repainting will never be of factory quality
You can get better than oem finish if you have some decent budget, most indian made cars have shitty paint quality. orange peels are everywhere
Ekdum sahi kaha aapne.. teflon coating and wax polish is enough for mainly MIDDLE CLASS CAR owners.
Teflon coating is waste of money.. go for ceramic or graphene coating but only if the car is new
Teflon coating is considered normal polish in most places
Jo bhi ye video dekh ke rat mesh lagane ka soch ra h to 2 cheez ka dhyan rakhein - rubber washer/tape aur locktite zaroor use karvae. Varna kaafi rattling ki awaaz aa sakti h.
Even washing machine me bhi rattling ki awaaz aati h agar mesh ke sath washer na lage.
Log jeb wagera kuch nhi khol rhe , companies mei EMI TERMS kaafi easy kr rkhe hai , jiski vajah se ye sab ho rha hai aaj , especially in luxury brands..... 85% of luxury brand cars are in EMI TERMS
We need more channels like you who give true information bro
Keep up the great work!
Brother ceramic coating/ graphene coating life also depends on how it gets maintained too.
Teflon is a banned product and no more available in market. It’s a scam now of someone sells u Teflon
Nano coating is not advisable to apply just like that. Spray form coating which gives a quick coat and gloo can be considered as a DIY coating. But a concrete coating always depend on a passionate and professional Detailer nearby.
Bro indirectly ROASTED "BROTOMOTIVE"
😂
Wo ppf thodi karte hai...unka kaam paint job ka hai
😂
Lol
Absolutely correct information… no mid level customer should go for these,,
It’s a very good analysis.
Regarding PPF, it is useful for expensive and off road vehicles. Ceramic quoting will not give you protection as PPF. Ceramic quoting will not save your car paint from small stone chips. Good quality PPF applied by professionals will be a good for cars, specifically if you are doing more off roading.
You can also use semi PPF Quoting and rest nano ceramic quoting. (Like bumpers can have PPF, rest ceramic.)
Yellowing will certainly be a problem with white cars, but will hardly affect other colors. Nowadays PPF comes with anti yellowing formulas.
All in all, whether it’s nano ceramic , PPF or Teflon, if you give it to some roadside vendor with no proper expertise, he will surely ruin your car. This is one service which should have no compromise on quality of work or material.
Rat mesh is one thing I am certainly considering applying in my car. I was not aware of this.
I agree the PPF is costly, they asked me 1.5lac for my Honda City 2022 and I opted for Ceramic Coating considering the high cost OnRoad and the PPF 1.5 was out of my budget.
Unfortunately, within 2 months, my car door panel got a big deep scratch that is soo long that I cannot cover it up without a complete repaint. I regret not getting the PPF.
I wish we had long lasting PPF to justify the cost associated with it.
PPF can't avoid deep scratch, PPF is scam if you run car in bumper to bumper traffic. I wasted 1.7L on PPF. My car got scratches from a MCD truck and i have to to claim insurances and then again paid for PPF.
I know someone who has around 10-12 cars in his garrage and non of his cars have ppf on it yet all his cars are in good condition. He just parks his cars under shade and takes good care of them.
Very helpful information for a car 🚗 PPF and ceramic coating. 100 percent rights & truly your advice 🙏
I disagree that PPFs (Paint Protection Films) are a scam for the most part. I own a black Verna Turbo that I purchased last year. Initially, I was hesitant about PPF due to its price and the lack of authenticity signs. One seller in Andheri was offering Garware PPF with an 8-year warranty for 55k, while another quoted 97k. I decided to contact Garware directly, and they provided a list of nearby authorized detailers. I ultimately went with one of them for 80k.
The reason I chose PPF was that my car is black, which requires extra care. I wasn’t fully aware of this since it’s our first car. During regular driving-over 14,000 kilometers-I noticed many stone chips, swirl marks, and minor scratches from cats in my society, as I’m a cat feeder. They often climb on the car and wait for me. Lastly, since this is our first car, I have emotional attachments to it, and I wanted to give it the best care possible. I also don’t plan on selling it anytime soon
@@33_chaitanyagadkari64
Brother here the math
Suppose one of the ur bumber got damaged., thn cost of repainting the bumper will be cheaper thn some high end films.
When you go to sale your car its very unlikely Someone will be paying you a premium for the ppf,
Even a minor repainting on dents before selling will do the job. Ppf makes only sense on luxury cars where cost of repainting is very high in dealers.
@@pdutta_indrepainting will reduce the resale value of the car. And the repainting will never be of a factory quality
I live in Mumbai, and every alternate weekend, I visit Lonavala. There, stone chipping is as common as Maganlal chikki. I believe that repainting reduces the resale value of a car. Beyond just resale, repainting is never the same as the original paint because the first coat is applied by a machine, while subsequent layers are applied by workers, leading to noticeable quality differences.
But why be so negative ki ye hoga vo hoga? let's be realistic: if a car is driven on the road, something is bound to happen eventually. Should we avoid using the car out of fear? I also asked about the charges for replacing a section of paint protection film (PPF) if it gets damaged. He quoted ₹450 per square foot for that service.
I just sent my 2 years old sonet to carzspa for ceramic and nano coating 😅
@ just a suggestion - ceramic coating n all from niche companies is fine but if ever planning for a ppf go for reputed brands. Aegis has lifetime warranty but what if he goes out of business in few years? Phir kya karega lifetime warranty ka?
Just watched a video y'day on mahindra-octane that was basically advertising a shop and its detailing services. This one is a reality check, thanks!
Cost of full body painting honda city is ₹30k in local and ₹45k in Honda dealership. Why would anyone apply more expe nsive PPF
Painting se resale value kaam hota hai bro. Even sometimes they took it as a accidental car.
@annoynommus yeah, but that's the point, you would've to paint a accidental car eitherway, PPF don't protect the paint from major accident. Why bother putting PPFs on C segment cars.
“Wet coat” is also an easy to apply detailing. It gives ceramic coating effects with minimal effort.
I have been using ppf since 5yrs, I have had no issues so far.
Like every service you have to go to the right detailer.
good information. I was thinking of puting PPF on my vehicle changed my mind after watching this video
I disagree on the PPF. My points are as follow:
1. Instead of looking at the actual cost of application, think in terms of percentages. For example if a car costs 1Cr, a 1L PPF is only 1% but for a 10L car, thats 10%. So dont go by absolute value of the application but look at the ratio. The cost of repainting a panel in a GLE is not the same as that of a verna or city.
2. Consider this. A german brand or an expensive car is more likely to spend long time waiting for parts at the workshop as compared to a mass market product. The service center is NOT going to take care of your car and is going to lie in their yard for weeks. Consider bird droppings as a BIG problem as these can burn through ceramic coat as well as clear coat and make permanent marks on expensive paints. PPF fairs better here. I have had first hand experience when the starter motor in my X3 burned out prematurely and the vehicle spent 3 weeks at the yard. The car had just been freshly ceramic coated but when I got my car back I had bird marks all over the bonnet. It was so disheartening
3. Ceramic/ Teflon are shams. They last only a few washes and get back to original state in a few months.
4. Forget self healing - If the PPF is thick enough it can save your from minor brushes. When I got my GLE (coming from X3) I was not used to the size difference. Just as I was driving out of PPF shop, I had a minor brush on the front left and the Rift taxi had some good scratches. I was pleasantly surprised to see that the PPF took up the entire brunt of the damage. I decided to not get it fixed as you can never be sure in bangalore. However the resale value of the vehicle - esp for luxury/ exotic ones - is totally dependent on the touches you make.
5. Lastly most luxury car dealers or high end vehicles offer PPF service as part of their internal offers. This is to ensure that trained people open up the vehicle. Yes, you pay a lot more but think about how much expensive it will be if something were to go wrong.
Cheers
Chup saala.
Biturbo media , ARD wheels are the best automobile information channels keep going brothers 🎉❤
Wrong info.. I am in US and part of automotive business.. PPF with good quality and installed properly.. it’s a great protection
Perhaps true. Need to balance cost of car vs cost of application. Then it also depends on air particles and rain (like dust and salts) and harshness of the sun. Based on these, the plastics can deteriorate faster… considering basic chemistry.
In india 🇮🇳 substandard quality is a part of day to day life, in every walk of life it is the same! This automotive accessories market is so much flourished now yet our roads are f****ed up all over lol 😂 we now get toxic airs to breath & no one gives a damn … 😂
00:59 Aur isiliye main iss Video main Batana Chahta Hu Ki Kaise Ek Sahi Bachhe Ko pehchane jo PPF ke bare main sabse zyada jaanta ho..aur Galat Bacche se Baat Karke Apna keemti Samay barbaad na Kare...kyunki Bacche kuch bhi bolte hain..jhoot bhi Bahut Bolte hain...unhe Farak nahi Padta...Lekin main Ek ladke ko Janta hu jiska Naam "Farak" hain but woh Padta hain.
Btw Geat Video brother..one of the few honest channels ❤😊
Pune ke Do Mote logo ko target kyu kia 😂😂😂😂
I differ with your on the anti rust coating. If the anto rust is not done on a totally dry & clean surface, it becones the cause of rusting as it locks the moisture & dirt in!
Bhai scooter waale log kya hi ppf ki baatein karr rahe hai. Tumhaare liye nahi bana hai ppf. Tum plastic ki panni lagaao apni scooter pe
Woh vese bhi middle class logo ke liye bata raha hai tere pass jyda hai toh tu karwale
I am a car detailer and i do have a opinion. Paint thickness has to be measured and when cut polishing the car. And when washing it. Just spray soap the car and then just pressure wash it. That’s it.
ये होता हे असली 💯you tuber good sir ❤️🙏🏻
Brotomotiv Scammer❌
Biturbo Media ✅✅✅
Similar kind of thing which is being promoted is coupler to coupler modification which is just waste of money
I own a Hatchback the time i bought it i was researching about ppf. And finally decided to not apply. I saved my 50k. Because its been 5years & almost every year i claimed insurance of my car. And some panels were replaced. Can’t imagine i cost i would have to bare to get that ppf applied to those panels again & again.
Finally someone spoke the much needed truth needed ✌🏻🙏🏻
And yes ceramic coating do work but only if it's done by a professional and with genuine products. Otherwise the effects fade away in a week-month or 4-5 car washes and proper care.
Hats off to your audacity man for speaking on this scams but on the other hand influencers like @arunpanwar and @anmoljaiswal are endorsing the ppf companies. One needs guts to speak against these ppf giant companies. Hats off to you and thanks for being so truthful and being a real automotive influencer.
DIY( Do it Yourself) Instant ceramic coating ❤are best for middle class ! Prices are geniune aprox. 1399/- & shine like Professional coatings . Durability up to 180 days . 200 ml bottle last for 3-4 applications. Easy to apply ! Better than Waxes..
#instantceramic
You saved my 50000/-
.thank you bhai 🙏🙏
thanks man!!! you cleared the doubt no one is talking about
I am big fan of this man. He does such good work to keep us informed
I personally appreciate your all efforts for your informative videos,
Bhai my humble request to you that please make a video on after market infotainment(music and touch screen with navigation) system for whom haven't or want to upgrade there existing company given infotainment system.
Nice video. But for people who are planning to keep car for long time PPF makes total sense. Resale value goes down drastically if original paint quality is deteriorated. PPF will protect that plus avoid minor scratches and also swirl marks are not as much on PPF when compared to a non PPF car
I loved your comments and compassion bro. Keep up the good work 👍
4:00 sahi kaha bhaiya.
Agar aapka budget 1.5lakh ki PPF ka to mat lagwao. Gaadi ko chalne do Bina ppf k scratches aur dents k baad bhi kisi professional workshop me original paint bhi karwaye to 70-80k ka kharcha aayega aur gaadi fir new ho jayegi. Aur agar ppf lagane k baad koi accident hua to ppf k paise alag aur paint k paise alag..