I joined the club! I got mine earlier this week... and it... is... AWESOME! Runs a little on the small side, unfortunately. For my medium to large sized American face, it just barely goes under my chin when adjusted to the largest size - but it is still the best mask I have ever worn, and it is easy to forget that you’re wearing a mask when you have it one. Great breathing!
@BOSSMusic it ultimately depends on what setting. If you want the most power stick with the low setting which gives you 5.5 hours of fresh air. The medium setting is 3-4 hours and the highest setting will only give you 2 hours or 2.5 charge. The only downfall is that once it dies, this mask is deemed useless cause there will be a low probability of your droplets escaping
Here in the Philippines it is sold under a different name. I just don't know if they ship globally but you can search it's name. This is the link that i went to and bought the product. prolabsph.com/collections/nxt-gen-protective-mask/products/philipis-blaise-nxt-gen-n95-protective-mask
@@joequis6173 bro, kamusta yung product? If you dont mind me asking, do you use it in the hospital setting? If so, washable ba yung outer cloth shell? Thanks!
@@lejend69 it is equivalent to about 180 dollars. The advantage is the electric fan and filter that can last for 1 week to 3 weeks depending on the situation. It would be great if you are a healthcare professional or in a hotspot for the recent virus. If you are a physician dealing in a hotspot and need PPE, i would suggest the cleanspace halo. Look also at the price of replacement filters which is 25 dollars for a pack of 5 filters. Weigh in the cost effectiveness for your personal need. There are cheaper ones.
@@ruixel I am still waiting for my order and will probably arrive within this week. I plan to use it in my out-patient medical clinic. The outer cloth is washable from what i know but will let you know when the prodecut arrives. If you work in the hospital and need very good PPE due to hotspot, look into cleanspace halo which is alot better but more expensive...ALOT MORE EXPENSIVE. Cleanspace would probably help in ICU setting if you are a physician or nurse. I will let you know how it is when it comes.
curious if this passes the lighter test. A LOT of the vent style masks just release your exhaust breath directly out the port w/o filtering it. Which would make this mask useless for any type of covid protection.
@Xandra J I think it would, ive been using it for two Weeks. The difference is that the fan slot for the air is on the bottom of the fan so it’s shoots directly down. Plus there’s a N95 valve underneath. Traps particles before it hits your face. So it’s protecting you and other people around you
@@maggielim34 if it pushes air in, it pushes air out. of course it would 'fail' the lighter test. the lighter test isn't a real test at all, though, because it doesn't matter if the exhaust air is moving if it's been filtered.
@Roy Wilkie you’re probably right this might fail the lighter test but no one knows unless someone runs the test on this particular mask. From observation, the slit on the bottom of the fan is titled towards you. To clarify, in order for your droplets to escape it has to pass through the N95 filter, then the turbo fan and then hit the plastic metal casing that houses the fan and finally shooting out towards your neck/ground. I’m not doubting that some of my CO2 is escaping but either way this still provides more protection against others when it comes to a valve mask. Clearly this would protect you more than others but those suffering with asthma or other breathing problems this should be used. Plus you could always stick a regular cloth mask on top. I tried that a couple of times and I can’t tell the difference. Seems like I’m still getting more airflow shooting at my face no matter what
I want to order it but I believe the mask sucking the Air OUT instead of IN.. please correct me if am wrong because In the Vid you explained it the other way around ... I have been searching for someone used this mask .. what I need to know is how sealed is the mask because a fan that just sucks the air out of the mask is actually can suck in particles from the edges of it's not sealed .. I wonder how heavy is the mask with the Fan ?
@Omran Alsayed To answer your question... the seal is tight and the air isn’t escaping through the sides. The fan itself itself when turned on is blowing air into the mask but also doing its job of pushing air out down towards the ground. If you heard correctly the N95 filter is what protects you and stops any particles coming in. This mask is heavier than the standard mask but the question is would you compromise your breathing over that minor issue? I had this for a couple of days now and it’s great for people with breathing and asthma problems.
Does this form a tight seal around your face? I have hesitated to buy anything that resembles these type of masks because they don't seem to form a tight seal.
@dave morrison depends on what setting. You can get away with over five hours on the lowest setting. Medium will get you 3-4 hours and the highest will be 2 hours. Also just wanted to note that the fan must always be kept in order to prevent the low probability of the spreading of droplets to others since the fan eliminates your CO2. Charging in total takes 4 hours or when the light stops blinking
Maggie Lim I got mine this week, and I love it, but every time I plug it in to charge, it never stops blinking. I heard that I shouldn’t overcharge it, but today it didn’t stop blinking even after 2 hours charging, and it died after an hour and fifteen minutes workout (it was dead before I did the two hours of charging). Will try charging for four hours like you suggest, and see if that does better. I do love the mask otherwise - but that’s a long time to charge if it lasts shorter than the charging time.
You can use the power supply fan more comfortably in outdoor sports such as running, fitness so run a little and check your ability, it is worth for 99usd
Wait what i ordered an electric skateboard from China it has a huge lithium 18650 battery shipped via air from FedEx. Took 4 days to ship from China. Do you mean it is using Lipo then maybe that makes more sense.
Been looking for a mask like this. My main concern is the CO2 buildup when we exhale using normal mask. Maybe with this CO2 will be reduced or eliminated.
@3D Printwiz this may help. So your carbon dioxide is being eliminated with the fan(slit on the bottom) this is not a normal mask. I can guarantee you-this mask will make you happy given that you can breathe normally
@Kim Lee I’ve heard, I would suggest putting a surgical mask on top of it. Plus if you want to get technical about it, it should be fine but again the fan must be always on and never off. Theres a lower probability that your droplets might come out but then again it might be harder due to your droplets passing to the filter, plastic compartment and fan I’ve really wish I had a cited study to back up my points but no one seems to know about these masks with fans Also I’ve tried out a couple of other diy options that still includes the fan and it works wonders
@Peter Munoz-Bennett depending on how creative you are. Here’s a few that worked out best for me especially on hot days where there’s semi warm air flowing into the mask 1) took out the outer mesh shell and replaced it with a cloth mask with the filter and fan still intact 2) used a paper surgical mask and taped it on top of the cloth mask to cover the whole thing up leaving the bottom of the mask to ensure the fan doesn’t burn up Also i tried this and freaked out cause the fan got super hot where I heard squeaking sounds when taping something over the slit on the bottom. Dont try that cause you can break the whole entire mask. You can basically redesign the whole entire mask since the fan is literally the core part.
question what wattage/voltage charger is most recommended for the product? how do you know when the charging is finished? expected battery life?.. when is short,too short?
I think I can Diy that, it's just a small battery from Bluetooth headset or & a small fan from laptops, available at Pc shop plus bonus a combo meal at fast food cheap it wont reach $100
I have ordered the Airpop mask & the Smartmi mask from shopmask & they delivered my mask as they stated in my email receipt. I did not have any issues with shipping.
How do you completely sanitize the entire mask unit? How can we make sure that the electrical part is also sanitized and not contaminated? Thanks for your help.
So it is sucking air from outside or through the entire filter layers?. It looks actual filtration area is only where tiny fan is fixed. May be the fan will help virus to pass the filter easily. Fan area filter should be HEPA type
There is a valve on the filter that only lets out the exhaled air. When you inhale that valve is closed so nothing comes in through it. So you're only breathing in air through the filter. The fan is only taking air out to keep the interior of the mask cool and free of condensation and it works very well if I do say so myself.
I’ve been doing videos myself over here in Japan about wearing face mask 😷 here in Japan and I was actually thinking about buying this and checking it out myself. It looks like a winner but I actually go out often and put the face mask to the test on very long walks and and in different types of temperatures that has happened over here in Japan. I’m glad I caught your video as I was researching rather to buy this or not.
i dont mean to be so offtopic but does someone know a tool to get back into an instagram account? I was dumb forgot the login password. I would love any tricks you can give me.
@Asa Kareem Thanks for your reply. I got to the site on google and Im trying it out atm. I see it takes quite some time so I will reply here later with my results.
@Asa Kareem DAMN IT REALLY WORKED! Just hacked my instagram password within roughly 30 mins of using the site. I had to pay 15 $ but for sure worth the price :O Thank you so much, you saved my account !
@Moody Mo clearly the best mask. I just got mine a couple days ago. It really makes being outside more tolerable since masks are now officially required. I mostly have it on the highest setting but feels weird if someone is standing near me since they can hear the motor
@Erika Santiago Philips is the only well known brand. The other ones are considered knockoffs. Price is cheaper for the other lower end masks. For the airflow the Philips will give out 41L per minute while the other ones are 27L-31L
@Ma. Theresa Dimaculangan No it’s not. The product is over in China so basically you have to order it SEPARATELY on this site www.shopmask.com. The filters do get costly but I’m sure you can custom fit your own N95 filters. The only issue will be fitting the filter on the fan. The whole product is pricey for a reason plus you’ll have to deal with the $60-80 shipping
@Kai Fam Yeah, so when you click on the Philip respirator mask product and where you click add to cart you should be able to check out on there. There you’ll be able to enter your payment options and choice of shipping. Hope this helps. If not LMK
Yup...but remember that it has an electric fan that will suck air through this filter and the pressure in the mask will push air out so outside air coming in from any other way is difficult because of the air circulation in the mask.
you will be breathing through the n95 filter too. What the fan and the small filter in it does is provide more fresh air inside the mask so you have less condensation and heat. This provides more comfort. But no extra protection than your standard n95 disposable mask( well maybe a little more because construction is much better)
@@rage8kage Yes..you are right about that it is more about the comfort. But according to their site, filter changes depends on the situation. So the price of the filter should also be considered. The cost-effectiveness of buying this product. It says that if you have a high VIRAL risk....the mask should be changed every 4 hours..which, in terms of price, will be expensive compared to a regular n95 mask. The product boasts that you can use the mask for 1 to 3 weeks..again depending on air quality. So...if you are not in a very bad coronavirus spot maybe you can consider this product for allergies or recurrent asthma due to environmental exposure.
It was $180 when I got mine, and the very next day it went out of stock, but it looked like the price might have gone up to $199. I think as this product gets more popular, they keep raising the price. I saw them go out of stock for about four days a week before I ordered mine. This is now the longest they have been out of stock (almost three weeks).
Yup! haven’t reached 3 months so based on having it for a little over a month it’s like as I first bought it. At times I do have to adjust the straps on the side. I’ve been noticing for another reseller such as problabs they’ve gotten a lot of details and facts wrong. Comparing this to the Alexis the amount of air is a lot lower so for the Philips fresh air mask it gives off 41/L on the highest setting so for the fan it doesn’t move as fast. Same thing for the battery., it dies faster. I haven’t had the Alexis mask but I know from the other reviews is that there’s no slit on the Alexis so all the air stays inside the mask. For the Philips, I guess you can have a surgical mask to prevent the air from coming out from the outside
Great video! My friend in Chengdu bought me this mask, but finding a shipper to send it to me in the US has been a problem. DHL won’t take it because it has a battery. How did your friend ship it to you?
@@lazybuccaneer7683 the outer layer is exposed to all the elements in the air, including viruses. If we cant disinfect the outerlayer, it is very dangerous
Can you do like a 1 week reviewmafter working outside or a brisk walk or a run.. My job is very physical and would like to know how the mask is while breathing heavily.. Thanks in advance.. I sub...
@Erwin Delarmente I posted a review so reposting it here ❌UPDATE: OUT OF STOCK❌ Compare and contrast to other types of Masks with the amount of airflow 🥈Alexis breathable mask: 30L of air per minute🥈 🥉Bouvier Smart Nano tech mask: 17L-27L of air per minute🥉 🏆Philips fresh air mask: up to 41L of air🏆 ◼️Grey ◼️Black ◼️Pink 📌YOU MUST HAVE THE FAN ON TO ELIMINATE YOUR CO2 SO IT DOESN’T SPREAD. IF THE MASK DIES YOU HAVE TO SWAP IT OUT FOR THE STANDARD MEDICAL MASK . YOU CAN ALSO PUT A MEDICAL MASK OR CLOTH MASK ON TOP OF THE PHILIPS MASK WHICH AGAIN DOESN’T SlOW DOWN THE FAN OR RESTRICT THE AIR FLOW.📌 Here’s a full on review on my experience with the Philip fresh air mask since there aren’t many out there. I received this a week ago from a site called www.shopmask.com which took approximately around 2 weeks. Upon opening up the package the PHILIPS(house named brand) was very minimal in terms of the branding. It did feel like a premium product upon arrival. 👁🗨COST $179 without shipping so with the shipping(2-3 days) +$80.00 was added. 📦 2-3 days DLS: $80.00 📦5-7 days DLS: $60.00 Took two weeks to arrive from purchase date since ‼️⚠️IT ISNT SOLD IN THE USA due to lithium battery and it is currently in high demand. SPECIAL HANDLING IS PRETTY MUCH REQUIRED‼️⚠️ I would suggest you to buy the filters together upon checking out cause you won’t have to deal with paying an additional $60 shipping( the cheapest but I paid the 2-3 express shipping) 🔴Filters alone costed $30 with x5 -> appearance I’m able to be more functional and productive. Thanks to Alex, I wouldn’t have known this product exists so THANK YOU!
I want to add to Maggie Lim’s review: I find her review to be spot on. (Funny how this mask is developing its own fan club) - I made one of the last orders the day before it went out of stock (and has stayed out of stock since). I was worried mine wouldn’t arrive and contacted Shopmask, and they explained that there was a Covid outbreak near the factory where these are produced, so that slowed down production. I’m contemplating getting another one, so I have been watching every day to see when they go back in stock. My one thing to add to Maggie’s review: this is made for smaller faces. I think the thousands of face profiles they did were based off smaller non-American sized faces. I am an athletic man 6’ in height, and I am able to put the adjustable strap to the largest size and the mask will cover my face, but it doesn’t quite go below my chin. If I move it below my chin, the the top of the mask is below the bridge of my nose, and nose pinch to keep it in place doesn’t quite work. I would say this mask was a 10 out of 10 if it had just an inch of more “height” in the fabric as well as that much more height in the N95 filter. If you put this side by side with the average mask sold in the US, you’ll see that it is a bit “shorter”. So I would say this mask is a 10 out of 10 for anyone whose face it fits perfectly, but for me it is a 9 out of 10. I still love it beyond all other masks I have tried, though. I did my first workout in it today: like Maggie said, you feel the hot exhaled air a moment before it disperses by the fan, but if I am wearing the mask and I am not working out, I don’t feel my exhaled air at all. Despite being slightly too short for my face, I STILL love this mask a lot and highly recommend it.
Oh, and the mask also took exactly two weeks to arrive, even though the company contacted me and told me there was a slight delay with my order due to a covid outbreak near the factory that produces the masks. The order STILL made it to me in two weeks (which was the expected time), so kudos and congrats to the company and people at shopmask for getting it to me on time even though they were having supply difficulties.
He specifically stated that he liked this mask because his glasses didn't fog up. Here is the part where he talks about it. ua-cam.com/video/0p26UuVvPE4/v-deo.html
@@diogoeskate3075 Hello hello..just got it a couple of days ago Yes, fan is an extractor. It takes 4 hours to fully charge from dead battery (light stops blinking). I used it on medium setting and it was drained in about 3.5 hours. For the price, i am kinda disappointed on it. BUT it is easy to set up and the mask is an n95. The low fan setting (which lasts 5.5 hours) is okay to help suck in air through the mask. I thought there was a filter in the extractor part of the white mask, but none. I was asked... what if the person using this has covid, can the person spread the infection...and the answer, for me, is yes. When you exhale, the air from your lungs go out through the extractor that has no filter. WHEN THE FAN TURNS OFF AND YOU INHALE, AIR WILL ALSO GO IN THROUGH THE FAN EXTRACTOR AND UNFILTERED AIR WILL ENTER. I can see into the mask from the under part of the extractor. You should have a back-up mask just in case the battery dies out and fan doesn't work. So....i am disappointed with the price for what i got. Think twice about buying this for the price. It makes inhaling less difficult when using an n95 BUT always be sure the fan is running.
@@joequis6173 tks for the detailed answer, its very bad design in my opinion, the fan should have a valve mechanism if it doesn't have a filter. The chinese masks I bought have a very good quality filters in front of them so you breath in filtered air, also when you turn on the fan it forces air into the mask. The heavier model I have works for 15H on the low setting and charges for 4H the lighter one charges for 30M and works for 4H on the high setting.
@@diogoeskate3075 Hello again, can you tell me what your mask is and if it is available in the philippines, if it's no trouble. Or you can tell me the brand and i will look for it. Thanks, again, for sharing your knowledge on this item.
www.shopmask.com/respirator-philips-freshairmask.html $229-249 depending on the shipping method you choose. Make sure you get a box of filters if you order one as well.
@TrumpetGapper I believe the sizing is pretty universal. For me the mask was on the bigger side but I was able to adjust the sides of the mask. No biggie in that sense. I doubt the mask will run small. I don’t think many had a issue with that unless you knew people personally that struggled with the fit
They do run small. I think I have a medium size face in American standards? (According to the sizing for Under Armor Sportsmask, I am a medium which is the second out of 5 size options they have.). This mask does fit me at it’s maximum size adjustment, but it barely gets under my chin, and doesn’t quite sit on the bridge of my nose - sits a little bit low. It can still give a good N95 seal even if it doesn’t go under your chin, though, and I think it is still very very worth it! A very large face probably won’t fit into this mask, though.
@Justin Tyme you would just keep it at the lowest setting giving you 5.5 hours of charge. I honestly had to buy two masks to solve the battery problem cause I need it at the highest speed cause of my asthma problems
@Billy I just got mine in today and it actually feels better than the usual mask. I did test it at Trader Joe’s for two hours and there were times were I didn’t feel like I had a mask on
@Jeanology it’s on www.shopmask.com Click new arrivals and the PHILIP mask should pop up. They did sell out in the past so not sure if they still have it stock
Billy L What is it? Hepa filters to filer the air from outside, Philips Logo on it? why still wear this clean air mask then, Hepa is enough, double hepa? save energy...
Hey there. I got it at www.shopmask.com/respirator-philips-mask.html With warmer weather I would say it doesn’t completely cool your face if you’re out in 75 degree heat. The fan actually will blow warm air in but it’s still feels better than the normal masks. Keep in mind that the price starts at $170 and goes up from there. It’s really only worth it if you have asthma or respiratory issues
Yuck, this is still a valved mask. I was really hoping it would have a second fan that blew in the opposite direction, through the filter media, to expel exhalations, similar to a larger PAPR device. This is not pandemic-safe. It's yet another "selfish" mask and I'll bet that an asymptomatic superspreader will probably be jetting viral particles extremely far into the environment with this design. I'll stick with my idMASK 2.0 with its superior silicone gasket fit, proper head straps (no damn ear loops!), modular design for easy cleaning, and much cheaper replacement filter media. The filter has a large enough surface area that breathing through it isn't laborious. And, hey, it's actually still available at a not insane price at their website. PM me for the URL or just Google it yourself.
First off theres needs to be a study on this specific mask in order to obtain any sort of evidence. Honestly no mask is a 100% leakage proof. For instance the regular surgical mask can still infect others as there’s gaps on the sides. Same like bandanas I doubt you own this but the slit is titled on the bottom of the mask and they claim that whatever particles attempts to come out is absorbed into the material. In order for the particles to come out it has to bypass the n95 filter->through the spinning turbine-> mental encasing->another plastic thingy in order to escape. Remember this mask gives out 41L of air so I’m not sure how much of your C02 is escaping as some claim that it gets eliminated due to how fast it spins This mask is honestly made for asthma users. Besides that if your that worried about it not protecting others just wear another mask on top to prevent the possible droplets
@@maggielim34 but is the exhaust air filtered like the inbound air, or it’s just a valve without filtering like for example a 3M 6200? I don’t understand if that circular part inside the filter is a round fixed filter or a filter/valve
@Barista MD I just got mine today and well the fan is literally bringing fresh air into your mask which is filtered in and out so in a way your CO2 is escaping from it. Honestly it’s the best on the market. No problems breathing in and out of it tbh.
@Maggie Lim. If it's pushing air IN then that hole should have an N95 filter in it otherwise it's not worth wearing them. It's not going to be protective.
@Barista MD there is an N95 filter under the fan. It does become pricey cause you have to buy the filters separate. Sorry I wasn’t clear about it at first.
@B Stebbins yeah it feels great and more productive with it which often it feels like im not wearing a mask. I’m surprised not many aren’t familiar with it. Also btw I just found out that the highest mode only lasts 2 hours😪
Barista MD it sucks the CO2 out of the mask. It does FEEL like it is blowing air on your face, though. Took me a while to figure out the physics of this, but basically due to pressure I “think” it is sucking air through the N95 filter and assisting your breathing, so it ends up being very easy to breath, and if you’re not exercising, you don’t feel your warm exhaled air at all because that leaves the mask right away. The fan direction is clearing blowing CO2 out, though. It blows it out downward onto your own neck, and if you put your hand close to the mask, you can feel the air pushing out.
www.shopmask.com/respirator-philips-freshairmask.html Takes one week or so to get to you. You're gonna end up spending like $470 for two with at least one box of filters just so you know.
SlowMotion214 do you know if your breathing feels restricted? I have asthma and need to go back to work soon. Does this make breathing more comfortable?
@@maggielim34 No, it doesn't at all. I have asthma as well. This is by far the best mask I've worn as far as breathing is concerned. I have a couple of masks from RZ Mask that have vents on them and those are better than regular masks but I still would occasionally feel like it's hard to breathe. I've had zero issues breathing in this mask and have worn it for a few hours at a time with no issue of heat or moisture building up inside the mask; which helps cause I live in the desert.
@SlowMotion214 I just ordered it, so this is basically the best you can get in terms of breathing wise? Do you usually have the mode on the highest setting? and how long does the battery last.. There’s another mask i just saw right after called ATMOBLUE. Would you know anything about it?
@@maggielim34 Well, I dunno if it's the best but it's the best out of the masks I have. I actually use it on low most of the time as I'm in A/C a good chunk of the day. If I'm outside I use medium. I don't know how long the battery lasts as I haven't run out yet. The longest I've had it running consistently was like 4 hours straight on medium and didn't have an issues. I didn't hear about that Atmoblue until you just told me about it so I wouldn't know anything about it. It kinda looks interesting. I ordered the Beeasy/Alexis/Resmr Electric Air mask so I'll probably be receiving that in a few weeks. I also intend to get the Xiaomi Purely mask from shopmask.com so I can try out them all against one another.
@NGMonocrom there’s an 95 filter valve underneath the fan. Smh🤦♀️. I had one for awhile and it’s better than any mask on the market in terms of protecting you and other people around you
They don’t even label the box. I mean if you ignore these stickers on two sides clearly saying what it is. But otherwise, yep no labeling of what’s inside. 🤦🏻♂️
Great product and nice to have it reviewd! Just to clarify. Did you buy and get it shipped by breaking the regulations? Or did you got that as a gift? You said two different things.
Thats pricey for just a mask made of nylon, the fan is probably a $10 item. I think the company is marketing the COVID-19. Cant see how it would cost $150
Here's my question. The air being pulled into the mask through the fan is outside air, right? So if your near a person and they sneeze or cough what is there to stop the fan from pulling those germs into the fan? I get there's a filter blah blah blah but still, isn't it still like playing roulette?
No, the fan does not pull any air into the mask. There is a valve on the filter that goes between the filter and the fan. The valve is closed while the fan is off. When you turn the fan on the valve opens at the bottom very slightly; just enough to let air out. When you inhale the valve is pulled closed thus the only air getting in is coming through the filter.
I was ready to buy one and watched multiple youtube videos on this including this one. However, I don't think it forms a tight seal around the face (very important) which kind of makes it useless and definitely not worth that price. It's like driving a luxury car in the rain with the sunroof slightly open...
i don't think a tight seal is going to make all that big of a difference...how about being able to breathe in it? I think thats more important...i have yet to wear any sort of mask for that very reason...I always feel like i'm smothering..I need to be able to breathe near normal.
yeah right, Philips engineers would totally make something that doesn't work and comes with a N95 label in it. The seal is perfect when I use it, but hurts a bit behind the ears if you make too tight
@Moody Mo lol I love it when misinformed people think they know how a product works without owning one🤷🏻♀️ hmm bashing something from a couple of reviews?
This mask gives a tight seal. It’s like driving a luxury car. Period. With the sunroof open on sunny days, and sealed perfectly shut on rainy days. Look at how many people in the comment section love this mask. No one who actually owns one is complaining. All happy.
dude put the filter on and get on with it already
I joined the club! I got mine earlier this week... and it... is... AWESOME! Runs a little on the small side, unfortunately. For my medium to large sized American face, it just barely goes under my chin when adjusted to the largest size - but it is still the best mask I have ever worn, and it is easy to forget that you’re wearing a mask when you have it one. Great breathing!
Can you tell me where you bought yours please?
@kay bee hey! I got it on this site. www.shopmask.com/respirator-philips-mask.html.
⚠️ the price got raised again to $189
kay bee I got mine on the same site which Maggie Lim showed you
Maggie Lim in the comments is the real MVP here answering all the questions this video didn't address. Props to you, lady! 👍
Awe thank you! Flattered!
Starts 4:40
You are getting it wrong for lithium batteries. All carriers can ship them, just need to indicate on the box. Very easy
Rocking it right now. This thing is very comfortable.
@Samir S might be pricey but you might want to consider getting a second one in case the battery dies
How long does the battery last ?
@BOSSMusic it ultimately depends on what setting.
If you want the most power stick with the low setting which gives you 5.5 hours of fresh air.
The medium setting is 3-4 hours and the highest setting will only give you 2 hours or 2.5 charge.
The only downfall is that once it dies, this mask is deemed useless cause there will be a low probability of your droplets escaping
@Samir S You get use to it after awhile I assure you.
I like this mask but it makes me wonder why this cannot be found in Philips Global website and is this even has a NIOSH certification
Here in the Philippines it is sold under a different name. I just don't know if they ship globally but you can search it's name. This is the link that i went to and bought the product. prolabsph.com/collections/nxt-gen-protective-mask/products/philipis-blaise-nxt-gen-n95-protective-mask
How much is that in us
@@joequis6173 bro, kamusta yung product? If you dont mind me asking, do you use it in the hospital setting? If so, washable ba yung outer cloth shell? Thanks!
@@lejend69 it is equivalent to about 180 dollars. The advantage is the electric fan and filter that can last for 1 week to 3 weeks depending on the situation. It would be great if you are a healthcare professional or in a hotspot for the recent virus. If you are a physician dealing in a hotspot and need PPE, i would suggest the cleanspace halo. Look also at the price of replacement filters which is 25 dollars for a pack of 5 filters. Weigh in the cost effectiveness for your personal need. There are cheaper ones.
@@ruixel I am still waiting for my order and will probably arrive within this week. I plan to use it in my out-patient medical clinic. The outer cloth is washable from what i know but will let you know when the prodecut arrives. If you work in the hospital and need very good PPE due to hotspot, look into cleanspace halo which is alot better but more expensive...ALOT MORE EXPENSIVE. Cleanspace would probably help in ICU setting if you are a physician or nurse. I will let you know how it is when it comes.
which one better? this one or LG puricare?
curious if this passes the lighter test. A LOT of the vent style masks just release your exhaust breath directly out the port w/o filtering it. Which would make this mask useless for any type of covid protection.
@Xandra J I think it would, ive been using it for two
Weeks. The difference is that the fan slot for the air is on the bottom of the fan so it’s shoots directly down. Plus there’s a N95 valve underneath. Traps particles before it hits your face. So it’s protecting you and other people around you
@@maggielim34 if it pushes air in, it pushes air out. of course it would 'fail' the lighter test. the lighter test isn't a real test at all, though, because it doesn't matter if the exhaust air is moving if it's been filtered.
@Roy Wilkie you’re probably right this might fail the lighter test but no one knows unless someone runs the test on this particular mask. From observation, the slit on the bottom of the fan is titled towards you.
To clarify, in order for your droplets to escape it has to pass through the N95 filter, then the turbo fan and then hit the plastic metal casing that houses the fan and finally shooting out towards your neck/ground. I’m not doubting that some of my CO2 is escaping but either way this still provides more protection against others when it comes to a valve mask.
Clearly this would protect you more than others but those suffering with asthma or other breathing problems this should be used. Plus you could always stick a regular cloth mask on top. I tried that a couple of times and I can’t tell the difference. Seems like I’m still getting more airflow shooting at my face no matter what
I want to order it but I believe the mask sucking the Air OUT instead of IN.. please correct me if am wrong because In the Vid you explained it the other way around ... I have been searching for someone used this mask .. what I need to know is how sealed is the mask because a fan that just sucks the air out of the mask is actually can suck in particles from the edges of it's not sealed .. I wonder how heavy is the mask with the Fan ?
@Omran Alsayed To answer your question... the seal is tight and the air isn’t escaping through the sides.
The fan itself itself when turned on is blowing air into the mask but also doing its job of pushing air out down towards the ground.
If you heard correctly the N95 filter is what protects you and stops any particles coming in.
This mask is heavier than the standard mask but the question is would you compromise your breathing over that minor issue?
I had this for a couple of days now and it’s great for people with breathing and asthma problems.
where did you buy the mask at , if i may ask
you can try Air+ mask. its similar. And I believed they ship overseas too
Got my wife one today. Hopefully she'll like it.
Did she like it?
2020 reviews of face masks.
Facts
Does this form a tight seal around your face? I have hesitated to buy anything that resembles these type of masks because they don't seem to form a tight seal.
I'm more concerned with being able to breathe.
@Jim Morrison yeah! You really can breathe. U have to have the fan on though in order to have that option
@@maggielim34 of course...how long does the fan work, after charging?
@dave morrison depends on what setting. You can get away with over five hours on the lowest setting. Medium will get you 3-4 hours and the highest will be 2 hours.
Also just wanted to note that the fan must always be kept in order to prevent the low probability of the spreading of droplets to others since the fan eliminates your CO2.
Charging in total takes 4 hours or when the light stops blinking
Maggie Lim I got mine this week, and I love it, but every time I plug it in to charge, it never stops blinking. I heard that I shouldn’t overcharge it, but today it didn’t stop blinking even after 2 hours charging, and it died after an hour and fifteen minutes workout (it was dead before I did the two hours of charging). Will try charging for four hours like you suggest, and see if that does better. I do love the mask otherwise - but that’s a long time to charge if it lasts shorter than the charging time.
thumbs down for showing something i cannot buy
Is it good for wearing at gym ... does the fan inhale air or exhale ..?
You can use the power supply fan more comfortably in outdoor sports such as running, fitness so run a little and check your ability, it is worth for 99usd
Wait what i ordered an electric skateboard from China it has a huge lithium 18650 battery shipped via air from FedEx. Took 4 days to ship from China.
Do you mean it is using Lipo then maybe that makes more sense.
Guess next time you won't leave the camera 6 feet away from you. 🤣 Cool information!
Been looking for a mask like this. My main concern is the CO2 buildup when we exhale using normal mask. Maybe with this CO2 will be reduced or eliminated.
@3D Printwiz this may help. So your carbon dioxide is being eliminated with the fan(slit on the bottom) this is not a normal mask. I can guarantee you-this mask will make you happy given that you can breathe normally
@@maggielim34 CDC now discourages vented masks, what now?
@Kim Lee I’ve heard, I would suggest putting a surgical mask on top of it.
Plus if you want to get technical about it, it should be fine but again the fan must be always on and never off. Theres a lower probability that your droplets might come out but then again it might be harder due to your droplets passing to the filter, plastic compartment and fan
I’ve really wish I had a cited study to back up my points but no one seems to know about these masks with fans
Also I’ve tried out a couple of other diy options that still includes the fan and it works wonders
Maggie Lim What other DIY options did you try?
@Peter Munoz-Bennett depending on how creative you are. Here’s a few that worked out best for me especially on hot days where there’s semi warm air flowing into the mask
1) took out the outer mesh shell and replaced it with a cloth mask with the filter and fan still intact
2) used a paper surgical mask and taped it on top of the cloth mask to cover the whole thing up leaving the bottom of the mask to ensure the fan doesn’t burn up
Also i tried this and freaked out cause the fan got super hot where I heard squeaking sounds when taping something over the slit on the bottom. Dont try that cause you can break the whole entire mask.
You can basically redesign the whole entire mask since the fan is literally the core part.
120 hours divided by 24 hours equals 5 days
U wear the masks while sleeping, showering and eating?
Thanks Alex for a nice review i really liked it.
question
what wattage/voltage charger is most recommended for the product?
how do you know when the charging is finished?
expected battery life?.. when is short,too short?
I think I can Diy that, it's just a small battery from Bluetooth headset or & a small fan from laptops, available at Pc shop plus bonus a combo meal at fast food cheap it wont reach $100
I’m from Toronto Canada, has anyone ordered this from shopmask and had no issues with shipping?
I have ordered the Airpop mask & the Smartmi mask from shopmask & they delivered my mask as they stated in my email receipt. I did not have any issues with shipping.
@@ericdvan That's weird they just sold out of the airpop on that site
@@WeylandLabs I ordered the airpop mask before they sold out. Hope that helps you.
Does the battery gets hot on your face when using long period of time?
No, it does not. You don't even notice the battery as the filter is between your face and the battery and fan.
Breathing battery acid gases good for health
Very helpful video! Thank you 👍🏼
Hi, Where can I get this mask ??? Thanks
How’s the strap on the ears with prolonged use? Are they painful? Ty
@Jules Cabristante that strongly depends on whether you want them super tight. Honestly you can adjust the ear loops
can u wash it ?
I can not find it on the Philips website. Is it a fake Philips item?
How do you completely sanitize the entire mask unit? How can we make sure that the electrical part is also sanitized and not contaminated? Thanks for your help.
corona is a hoax
So it is sucking air from outside or through the entire filter layers?. It looks actual filtration area is only where tiny fan is fixed. May be the fan will help virus to pass the filter easily. Fan area filter should be HEPA type
There is a valve on the filter that only lets out the exhaled air. When you inhale that valve is closed so nothing comes in through it. So you're only breathing in air through the filter. The fan is only taking air out to keep the interior of the mask cool and free of condensation and it works very well if I do say so myself.
Philips it's here, in Amsterdam, 100 meters from here.
China? Outsourcing a good thing?
I’ve been doing videos myself over here in Japan about wearing face mask 😷 here in Japan and I was actually thinking about buying this and checking it out myself. It looks like a winner but I actually go out often and put the face mask to the test on very long walks and and in different types of temperatures that has happened over here in Japan. I’m glad I caught your video as I was researching rather to buy this or not.
i dont mean to be so offtopic but does someone know a tool to get back into an instagram account?
I was dumb forgot the login password. I would love any tricks you can give me.
@Zeke Layton Instablaster =)
@Asa Kareem Thanks for your reply. I got to the site on google and Im trying it out atm.
I see it takes quite some time so I will reply here later with my results.
@Asa Kareem DAMN IT REALLY WORKED! Just hacked my instagram password within roughly 30 mins of using the site.
I had to pay 15 $ but for sure worth the price :O
Thank you so much, you saved my account !
@Zeke Layton You are welcome :D
So if you stick your tongue in the fan will it hurt
how long will the battery last per charge?
I'm still trying to find this out before I buy it... lol
What site can I buy one????
Hi i know its been a year but, can you wear it with just the mesh shell and not the filter mask?
Best part of the video is of course the T-Shirt he is wearing. Hehe.
Thank you Alex for nice and Safety your introduce a Facemask... by the way where buy your Mask introduce and how much ?
I bought mine a while ago here www.shopmask.com/respirator-philips-mask.html
@Moody Mo clearly the best mask. I just got mine a couple days ago. It really makes being outside more tolerable since masks are now officially required. I mostly have it on the highest setting but feels weird if someone is standing near me since they can hear the motor
What is the difference between this Philips mask, the Beeasy and the Purely on their website? aside from prices.
@Erika Santiago Philips is the only well known brand. The other ones are considered knockoffs.
Price is cheaper for the other lower end masks.
For the airflow the Philips will give out 41L per minute while the other ones are 27L-31L
how do you take out the Fan from the mask
@Vergil DMC the fan snaps off along with the chargeable 🔋
They’re all separated into parts.
How much. Usd?
Those bulging masks remind me of Shaq’s jockstrap on a person’s face... 😂
One can only dream!
Do you have extra filters for that? Is it locally made?where can we order one??
@Ma. Theresa Dimaculangan No it’s not. The product is over in China so basically you have to order it SEPARATELY on this site www.shopmask.com. The filters do get costly but I’m sure you can custom fit your own N95 filters. The only issue will be fitting the filter on the fan. The whole product is pricey for a reason plus you’ll have to deal with the $60-80 shipping
@Kai Fam Yeah, so when you click on the Philip respirator mask product and where you click add to cart you should be able to check out on there. There you’ll be able to enter your payment options and choice of shipping. Hope this helps. If not LMK
But can you wear two of them over an N95 and under a face shield? Otherwise not my style.
And you are filtering ONLY with the tiny round-like filter and NOT with the whole mask, because the air is entering trought the tiny filter only?
Yup...but remember that it has an electric fan that will suck air through this filter and the pressure in the mask will push air out so outside air coming in from any other way is difficult because of the air circulation in the mask.
you will be breathing through the n95 filter too. What the fan and the small filter in it does is provide more fresh air inside the mask so you have less condensation and heat. This provides more comfort. But no extra protection than your standard n95 disposable mask( well maybe a little more because construction is much better)
@@rage8kage Yes..you are right about that it is more about the comfort. But according to their site, filter changes depends on the situation. So the price of the filter should also be considered. The cost-effectiveness of buying this product. It says that if you have a high VIRAL risk....the mask should be changed every 4 hours..which, in terms of price, will be expensive compared to a regular n95 mask. The product boasts that you can use the mask for 1 to 3 weeks..again depending on air quality. So...if you are not in a very bad coronavirus spot maybe you can consider this product for allergies or recurrent asthma due to environmental exposure.
Is there anyway to get one. My lungs are severely damaged from chemical exposures, then the black mold and asbestos kicked me to the curb.
Your website gives detailed information but no info on pricing or how to order. Is there another site where you can actually make a purchase?
@43drak
www.shopmask.com/respirator-philips-mask.html is where I got mine.
Currently they’re all out of stock rn so not sure when they’ll come back
@@maggielim34 Thanks but I don't see a listing on their prices.
@43drak oh looks like the price is gone once the out of stock appears.
When I got mine it was $170
It was $180 when I got mine, and the very next day it went out of stock, but it looked like the price might have gone up to $199. I think as this product gets more popular, they keep raising the price. I saw them go out of stock for about four days a week before I ordered mine. This is now the longest they have been out of stock (almost three weeks).
How do you clean it?
From my understanding you take out the filter, battery and fan then just wash it with a soapy towel and let it air dry.
Can you do newer model with solor only instead of charging
Is the Philips Blaise Mask durable? How many times have you used it? How does it compare to the Alexis Smart Mask? Thanks.
Yup! haven’t reached 3 months so based on having it for a little over a month it’s like as I first bought it. At times I do have to adjust the straps on the side.
I’ve been noticing for another reseller such as problabs they’ve gotten a lot of details and facts wrong.
Comparing this to the Alexis the amount of air is a lot lower so for the Philips fresh air mask it gives off 41/L on the highest setting so for the fan it doesn’t move as fast. Same thing for the battery., it dies faster.
I haven’t had the Alexis mask but I know
from the other reviews is that there’s no slit on the Alexis so all the air stays inside the mask.
For the Philips, I guess you can have a surgical mask to prevent the air from coming out from the outside
Oh man. I really want one of those
Great video! My friend in Chengdu bought me this mask, but finding a shipper to send it to me in the US has been a problem. DHL won’t take it because it has a battery. How did your friend ship it to you?
How come you just didn’t purchase it online. This is where I got my Philips mask at. www.shopmask.com/respirator-philips-mask.html
So the fan allows suction or airflow from external environment into the mask ?
@Da Wong yeah the air goes into the metal compartment and then through the filter
What is the Cost of the this Masks and how long its battery life
max 5.5 hours - 99usd
I need a face mask is easy to breath. Cause I’m doing labor or bit exercise. Can this helps
How to disinfect the outer layer after using?
You don't, the main entry and exit of air is throught the fan. The filter is where all is filtered that is why its replaceable.
@@lazybuccaneer7683 the outer layer is exposed to all the elements in the air, including viruses. If we cant disinfect the outerlayer, it is very dangerous
Spray alcohol
where can u buy it
that sounds like mask for me to wear and want find out how much would it cost let me know .please!
It costs $250
@Foa Tino 250? It’s $180.
Maggie Lim nice. So it’s less than $250, i just estimated the price haha
@Foa Tino lol the price hurt me a bit still.
Can you do like a 1 week reviewmafter working outside or a brisk walk or a run.. My job is very physical and would like to know how the mask is while breathing heavily.. Thanks in advance.. I sub...
@Erwin Delarmente I posted a review so reposting it here
❌UPDATE: OUT OF STOCK❌
Compare and contrast to other types of Masks with the amount of airflow
🥈Alexis breathable mask: 30L of air per minute🥈
🥉Bouvier Smart Nano tech mask: 17L-27L of air per minute🥉
🏆Philips fresh air mask: up to 41L of air🏆
◼️Grey
◼️Black
◼️Pink
📌YOU MUST HAVE THE FAN ON TO ELIMINATE YOUR CO2 SO IT DOESN’T SPREAD. IF THE MASK DIES YOU HAVE TO SWAP IT OUT FOR THE STANDARD MEDICAL MASK .
YOU CAN ALSO PUT A MEDICAL MASK OR CLOTH MASK ON TOP OF THE PHILIPS MASK WHICH AGAIN DOESN’T SlOW DOWN THE FAN OR RESTRICT THE AIR FLOW.📌
Here’s a full on review on my experience with the Philip fresh air mask since there aren’t many out there.
I received this a week ago from a site called www.shopmask.com which took approximately around 2 weeks. Upon opening up the package the PHILIPS(house named brand) was very minimal in terms of the branding. It did feel like a premium product upon arrival.
👁🗨COST
$179 without shipping so with the shipping(2-3 days) +$80.00 was added.
📦 2-3 days DLS: $80.00
📦5-7 days DLS: $60.00
Took two weeks to arrive from purchase date since ‼️⚠️IT ISNT SOLD IN THE USA due to lithium battery and it is currently in high demand. SPECIAL HANDLING IS PRETTY MUCH REQUIRED‼️⚠️
I would suggest you to buy the filters together upon checking out cause you won’t have to deal with paying an additional $60 shipping( the cheapest but I paid the 2-3 express shipping)
🔴Filters alone costed $30 with x5
-> appearance
I’m able to be more functional and productive. Thanks to Alex, I wouldn’t have known this product exists so THANK YOU!
I want to add to Maggie Lim’s review: I find her review to be spot on. (Funny how this mask is developing its own fan club) - I made one of the last orders the day before it went out of stock (and has stayed out of stock since). I was worried mine wouldn’t arrive and contacted Shopmask, and they explained that there was a Covid outbreak near the factory where these are produced, so that slowed down production. I’m contemplating getting another one, so I have been watching every day to see when they go back in stock.
My one thing to add to Maggie’s review: this is made for smaller faces. I think the thousands of face profiles they did were based off smaller non-American sized faces. I am an athletic man 6’ in height, and I am able to put the adjustable strap to the largest size and the mask will cover my face, but it doesn’t quite go below my chin. If I move it below my chin, the the top of the mask is below the bridge of my nose, and nose pinch to keep it in place doesn’t quite work. I would say this mask was a 10 out of 10 if it had just an inch of more “height” in the fabric as well as that much more height in the N95 filter. If you put this side by side with the average mask sold in the US, you’ll see that it is a bit “shorter”. So I would say this mask is a 10 out of 10 for anyone whose face it fits perfectly, but for me it is a 9 out of 10. I still love it beyond all other masks I have tried, though. I did my first workout in it today: like Maggie said, you feel the hot exhaled air a moment before it disperses by the fan, but if I am wearing the mask and I am not working out, I don’t feel my exhaled air at all. Despite being slightly too short for my face, I STILL love this mask a lot and highly recommend it.
Oh, and the mask also took exactly two weeks to arrive, even though the company contacted me and told me there was a slight delay with my order due to a covid outbreak near the factory that produces the masks. The order STILL made it to me in two weeks (which was the expected time), so kudos and congrats to the company and people at shopmask for getting it to me on time even though they were having supply difficulties.
Ummm you need to put the link where to find it... ???\
@Milton Arguello www.shopmask.com you’re welcome. It’s under the new arrival section
Noting gets in?
Hi Alex. I wear glasses and they always get fogged with my current cloth mask. Do you experience fog on your glasses with the Philips mask?
He specifically stated that he liked this mask because his glasses didn't fog up. Here is the part where he talks about it. ua-cam.com/video/0p26UuVvPE4/v-deo.html
I plan on ordering this device. I just want to know about how long does it operate until the full charge is empty using the 3 different speeds.
If you plan in ordering it know that fan is an extractor not an intake, acording to the brand specifications.
@@diogoeskate3075 Hello hello..just got it a couple of days ago Yes, fan is an extractor. It takes 4 hours to fully charge from dead battery (light stops blinking). I used it on medium setting and it was drained in about 3.5 hours. For the price, i am kinda disappointed on it. BUT it is easy to set up and the mask is an n95. The low fan setting (which lasts 5.5 hours) is okay to help suck in air through the mask. I thought there was a filter in the extractor part of the white mask, but none. I was asked... what if the person using this has covid, can the person spread the infection...and the answer, for me, is yes. When you exhale, the air from your lungs go out through the extractor that has no filter. WHEN THE FAN TURNS OFF AND YOU INHALE, AIR WILL ALSO GO IN THROUGH THE FAN EXTRACTOR AND UNFILTERED AIR WILL ENTER. I can see into the mask from the under part of the extractor. You should have a back-up mask just in case the battery dies out and fan doesn't work. So....i am disappointed with the price for what i got. Think twice about buying this for the price. It makes inhaling less difficult when using an n95 BUT always be sure the fan is running.
@@joequis6173 tks for the detailed answer, its very bad design in my opinion, the fan should have a valve mechanism if it doesn't have a filter. The chinese masks I bought have a very good quality filters in front of them so you breath in filtered air, also when you turn on the fan it forces air into the mask. The heavier model I have works for 15H on the low setting and charges for 4H the lighter one charges for 30M and works for 4H on the high setting.
@@diogoeskate3075 Hello again, can you tell me what your mask is and if it is available in the philippines, if it's no trouble. Or you can tell me the brand and i will look for it. Thanks, again, for sharing your knowledge on this item.
@@joequis6173 this would be easier by email if you are wiling to share
This electric mask seems to have a better standard compared to other brands available in the market.
Awesome mask 😷 it's good there a hole where the fan go that will definitely protect you from Coronavirus.
it’s not for coronavirus , it’s for the smog
can u wash the fabric? i guess not
@Kim Monzon They’re all parts, remove the fan and the filter and there you can wash the cloth fabric
Maggie Lim thanks for the info
How much and I want one
@Junior C over $250.00 with shipping
where you buy??
That dog comment was pretty Brilliantly well said. God I want that mask now.
www.shopmask.com/respirator-philips-freshairmask.html
$229-249 depending on the shipping method you choose. Make sure you get a box of filters if you order one as well.
use philipsfreshairmask.com mask is 99 usd filter 26usd , I don't know why shopmask offers so expensive prices
How much was this mask and how can I get one
Can anyone speak to the sizing of the mask? I've heard they run "small". I have a round rather large face. Any thoughts?
@TrumpetGapper I believe the sizing is pretty universal. For me the mask was on the bigger side but I was able to adjust the sides of the mask. No biggie in that sense.
I doubt the mask will run small. I don’t think many had a issue with that unless you knew people personally that struggled with the fit
They do run small. I think I have a medium size face in American standards? (According to the sizing for Under Armor Sportsmask, I am a medium which is the second out of 5 size options they have.). This mask does fit me at it’s maximum size adjustment, but it barely gets under my chin, and doesn’t quite sit on the bridge of my nose - sits a little bit low. It can still give a good N95 seal even if it doesn’t go under your chin, though, and I think it is still very very worth it! A very large face probably won’t fit into this mask, though.
@@petermunoz-bennett386 Thanks!
What's the product number?
Any idea what the battery life is like on setting 1? Setting 3 is only 2 hours so curious if 1 could last the day.
@Justin Tyme you would just keep it at the lowest setting giving you 5.5 hours of charge.
I honestly had to buy two masks to solve the battery problem cause I need it at the highest speed cause of my asthma problems
You must try the fan outside. In my experiment with other brand, the air still feel the same with the usual mask
@Billy I just got mine in today and it actually feels better than the usual mask. I did test it at Trader Joe’s for two hours and there were times were I didn’t feel like I had a mask on
Maggie Lim Where can I buy it?
@Jeanology it’s on www.shopmask.com Click new arrivals and the PHILIP mask should pop up. They did sell out in the past so not sure if they still have it stock
Billy L
What is it? Hepa filters to filer the air from outside, Philips Logo on it?
why still wear this clean air mask then, Hepa is enough, double hepa? save energy...
Maggie Lim please respond is it loud? I want this for my kid that has breathing problems
Can u hook us up with the ordering please??? I need that mask for this FL heat!!!!
Hey there. I got it at www.shopmask.com/respirator-philips-mask.html
With warmer weather I would say it doesn’t completely cool your face if you’re out in 75 degree heat. The fan actually will blow warm air in but it’s still feels better than the normal masks.
Keep in mind that the price starts at $170 and goes up from there. It’s really only worth it if you have asthma or respiratory issues
@@maggielim34 Thank u!
@@nymamy did u get one? that website charges a whopping 80 dollars
Yuck, this is still a valved mask. I was really hoping it would have a second fan that blew in the opposite direction, through the filter media, to expel exhalations, similar to a larger PAPR device. This is not pandemic-safe. It's yet another "selfish" mask and I'll bet that an asymptomatic superspreader will probably be jetting viral particles extremely far into the environment with this design. I'll stick with my idMASK 2.0 with its superior silicone gasket fit, proper head straps (no damn ear loops!), modular design for easy cleaning, and much cheaper replacement filter media. The filter has a large enough surface area that breathing through it isn't laborious. And, hey, it's actually still available at a not insane price at their website. PM me for the URL or just Google it yourself.
Thanks for the id mask tip, haven't seen it before going to get one to try. 😳 I can't believe this has a fan forced exhalation valve!
First off theres needs to be a study on this specific mask in order to obtain any sort of evidence. Honestly no mask is a 100% leakage proof. For instance the regular surgical mask can still infect others as there’s gaps on the sides. Same like bandanas
I doubt you own this but the slit is titled on the bottom of the mask and they claim that whatever particles attempts to come out is absorbed into the material.
In order for the particles to come out it has to bypass the n95 filter->through the spinning turbine-> mental encasing->another plastic thingy in order to escape.
Remember this mask gives out 41L of air so I’m not sure how much of your C02 is escaping as some claim that it gets eliminated due to how fast it spins
This mask is honestly made for asthma users. Besides that if your that worried about it not protecting others just wear another mask on top to prevent the possible droplets
@@maggielim34 but is the exhaust air filtered like the inbound air, or it’s just a valve without filtering like for example a 3M 6200? I don’t understand if that circular part inside the filter is a round fixed filter or a filter/valve
Got a light on it ....I want it
its a partical mask and not a gas mask
But is it FDA approved
Wouldn’t the fan just sucking dirty air through the little flap by the filter the whole time?
nope, the fan ain't sucking anything... its doing the exact opposite, sending air outside!
I'm confused. I thought its suppose to suck the CO2 out of the mask?
@Barista MD I just got mine today and well the fan is literally bringing fresh air into your mask which is filtered in and out so in a way your CO2 is escaping from it.
Honestly it’s the best on the market. No problems breathing in and out of it tbh.
@Maggie Lim. If it's pushing air IN then that hole should have an N95 filter in it otherwise it's not worth wearing them. It's not going to be protective.
@Barista MD there is an N95 filter under the fan. It does become pricey cause you have to buy the filters separate. Sorry I wasn’t clear about it at first.
@B Stebbins yeah it feels great and more productive with it which often it feels like im not wearing a mask. I’m surprised not many aren’t familiar with it. Also btw I just found out that the highest mode only lasts 2 hours😪
Barista MD it sucks the CO2 out of the mask. It does FEEL like it is blowing air on your face, though. Took me a while to figure out the physics of this, but basically due to pressure I “think” it is sucking air through the N95 filter and assisting your breathing, so it ends up being very easy to breath, and if you’re not exercising, you don’t feel your warm exhaled air at all because that leaves the mask right away. The fan direction is clearing blowing CO2 out, though. It blows it out downward onto your own neck, and if you put your hand close to the mask, you can feel the air pushing out.
Where did u order it??
How many hours is the the battery life once you used i?
That’s what I want to know also
I don’t think he even says this.
While air drying overnight I’d just charge it so it’s good to go in the AM then just reassemble it
Will it block coronavirus?
N95
Yes it does
It's made for that.
Wish they were for sale in the states. I want two.
www.shopmask.com/respirator-philips-freshairmask.html
Takes one week or so to get to you. You're gonna end up spending like $470 for two with at least one box of filters just so you know.
SlowMotion214 do you know if your breathing feels restricted? I have asthma and need to go back to work soon. Does this make breathing more comfortable?
@@maggielim34 No, it doesn't at all. I have asthma as well. This is by far the best mask I've worn as far as breathing is concerned. I have a couple of masks from RZ Mask that have vents on them and those are better than regular masks but I still would occasionally feel like it's hard to breathe.
I've had zero issues breathing in this mask and have worn it for a few hours at a time with no issue of heat or moisture building up inside the mask; which helps cause I live in the desert.
@SlowMotion214 I just ordered it,
so this is basically the best you can get in terms of breathing wise?
Do you usually have the mode on the highest setting? and how long does the battery last..
There’s another mask i just saw right after called ATMOBLUE. Would you know anything about it?
@@maggielim34 Well, I dunno if it's the best but it's the best out of the masks I have. I actually use it on low most of the time as I'm in A/C a good chunk of the day. If I'm outside I use medium. I don't know how long the battery lasts as I haven't run out yet. The longest I've had it running consistently was like 4 hours straight on medium and didn't have an issues.
I didn't hear about that Atmoblue until you just told me about it so I wouldn't know anything about it. It kinda looks interesting.
I ordered the Beeasy/Alexis/Resmr Electric Air mask so I'll probably be receiving that in a few weeks. I also intend to get the Xiaomi Purely mask from shopmask.com so I can try out them all against one another.
Goodluck that fan will suck the air outside, jf the air is contaminated with covid-19 it will put ot on your nose directly
Yup, exactly. This product is so ridiculous.
@NGMonocrom there’s an 95 filter valve underneath the fan. Smh🤦♀️. I had one for awhile and it’s better than any mask on the market in terms of protecting you and other people around you
how's the battery life?
What about the life of the battery if I use it the whole day.
The lowest mode will last the longest. 5.5 in total. The only way to solve this is to buy a second mask.
They don’t even label the box. I mean if you ignore these stickers on two sides clearly saying what it is. But otherwise, yep no labeling of what’s inside. 🤦🏻♂️
Great product and nice to have it reviewd!
Just to clarify. Did you buy and get it shipped by breaking the regulations? Or did you got that as a gift? You said two different things.
Thats pricey for just a mask made of nylon, the fan is probably a $10 item. I think the company is marketing the COVID-19. Cant see how it would cost $150
Nah in China the air is just nasty so they wear masks daily even before they released Covid to draw attention away from Hong Kong
Like a 12 year old doing an unboxing
mobile phone has battery and its available in all website
hi can you send the link where in taobao?
Aquí Tokio Jasón lo venden
Here's my question. The air being pulled into the mask through the fan is outside air, right? So if your near a person and they sneeze or cough what is there to stop the fan from pulling those germs into the fan? I get there's a filter blah blah blah but still, isn't it still like playing roulette?
No, the fan does not pull any air into the mask. There is a valve on the filter that goes between the filter and the fan. The valve is closed while the fan is off. When you turn the fan on the valve opens at the bottom very slightly; just enough to let air out. When you inhale the valve is pulled closed thus the only air getting in is coming through the filter.
I was ready to buy one and watched multiple youtube videos on this including this one. However, I don't think it forms a tight seal around the face (very important) which kind of makes it useless and definitely not worth that price. It's like driving a luxury car in the rain with the sunroof slightly open...
i don't think a tight seal is going to make all that big of a difference...how about being able to breathe in it? I think thats more important...i have yet to wear any sort of mask for that very reason...I always feel like i'm smothering..I need to be able to breathe near normal.
yeah right, Philips engineers would totally make something that doesn't work and comes with a N95 label in it. The seal is perfect when I use it, but hurts a bit behind the ears if you make too tight
@Moody Mo lol I love it when misinformed people think they know how a product works without owning one🤷🏻♀️ hmm bashing something from a couple of reviews?
This mask gives a tight seal. It’s like driving a luxury car. Period. With the sunroof open on sunny days, and sealed perfectly shut on rainy days. Look at how many people in the comment section love this mask. No one who actually owns one is complaining. All happy.
I want buy, where???