After watching this video, that nut was the first thing I checked. Mine was about to completely fall off the bolt. Thank you so much! The nut is a 24MM by the way.
YOU ARE AWESOME!!! I was literally hours away from spending $700 on a new washer. I saw your video and I fixed my washer in less than 10 minutes. God Bless You and know that you are making a difference!!
I thanked God for you tonight. Your video saved the day for a very sweet lady who has had enough problems. Same issue. Same fix. May God bless your house this week🙏 You may not believe but I do. Message me back when it happens😊
I’m so grateful, I saw your video, Yes my machine also has loose screw, easy fixed.. THANK YOU SO MUCH, saved money and feeling proud to be able to repair the washer.. Have a great day and be safe..🙏
THIS WAS EXACTLY OUR PROBLEM AS WELL! I highly suggest checking the pinion nut before attempting any other fixes. In our case the nut had contacted the floor and spun completely off. This probably happened months ago and the washer seemed to work fine, except for the UE error code. Now that the nut is back on and tight the washer is like new again.
I thank you from the depths of my wallet. Not long ago we had to have the transmission replaced in this washer. We washed a load and the next load would fault UE. Couldn't run another load. Lots of research, greased rods, no good. Watched your video and in a matter of maybe 3 minutes it was tipped up, tightened (24mm or 15/16 both fit the same.) put back in it's spot and the next cycle performed flawlessly. Your video saved me lots of money just wished I found it sooner. Thumbs up given! Thanks again.
Mannn, I was getting an LE ERROR CODE on my top load kenmore elite. After watching this video, I was hoping this was the fix. Opened it up, tip it over. And BAM, it was a loose nut. Just screwed it back on tight. And works like new!! Thanks for posting this!
A huge, huge thank you. This was incredibly perfectly timed. My Kenmore was making a Great big racket on the spin cycle. Your counsel and advice is greatly appreciated. You are awesome! Thank you!
I guess Im asking randomly but does any of you know of a way to log back into an instagram account? I was stupid forgot the login password. I would appreciate any assistance you can offer me
@Muhammad Emmitt I really appreciate your reply. I got to the site through google and im trying it out atm. I see it takes quite some time so I will reply here later with my results.
dude, this was my problem too. thanks for the video, saved me a lot of time. I have been getting UE faults for months, and this week I was getting a grinding noise and an LE code. bolt was really loose, tightened it up and it works fine
Very nice. I also tried replacing the suspension rods and springs and wedging foam around the drum. Neither worked. I planned on checking the bottom. I definitely will now! I'll come back to update
Your video helped out A LOT. Thanks. Looked at all possibilities including your solution. The bottom nut was not my problem though, but it got me thinking. The bottom nut was good and tight. And looking at that it stands to reason that if that can spin off then the top nut, just under the tub, could also come loose also. Mine did. Thanks for the heads up
The PE error code indicates that the water level sensor is malfunctional. To fix this: Unplug the washer for 10 seconds. Plug the washer back in, and restart the cycle again.
Here's the problem: Also affects Kenmore Elite 29002 models which are made by LG. 1. There's a recall. Here's the gov website link: www.cpsc.gov/Recalls/2012/lg-recalls-top-loading-washing-machines-due-to-risk-of-injury The recall is bc the Washer Washplate* (Kenmore Part AGZ72909701) comes off while spinning! LG/Kenmore will REPAIR FOR FREE! 2. When the washer washplate comes off, it strips the splines that are inside the washer washplate mounting hole, that the bolt screws through to tighten down the washplate to the inner tub. If the wash plate isn't tightened down, it moves and causes 'unbalanced load' errors. The frequent 'unbalanced load' error and subsequent shut down is made worse bc the washer has a system designed to rebalance loads on its own. What it does is it adds a little water, then tries to spin again. If it doesn't work, it tries a few more times before it shuts down and give you a UL- unbalanced load code in the digital display. Each time the clothes get wetter and heavier, making the rebalance impossible and then you're having to babysit the washer as it quits 3 times or so per load. Call LG/Sears. Demand a new washer wash plate, even if it's not part of the recall be the recall defect causes the spines to strip. Hope this helps. *Explanation of what a washer washplate is: If you look inside the inner tub (where you load your clothes, which sits inside the outer tub) attached to the bottom of the inner tub is a disc that kind of looks like a hub cap/UFO with the 'hub' extending up a bit. That hub is just a snap on cap and underneath is a bolt that goes into the drive shaft to hold the washer plate on. Here's another YT vid where you can see what I'm describing: ua-cam.com/video/4j7J4euNCWI/v-deo.html
When I called the number listed on the recall the lady told me that it was not on the recall list even though the model number and serial number of my washer is listed on this website. I have a Kenmore Elite 29272 model. She then tried to book me for a service appointment.
A and E Factory Services is the company that does the recall work. It makes no sense that no one on their end can help set this up. I suspect it's intentional but I won't put on my tinfoil hat.
After watching this video, that nut was the first thing I checked. Mine was about to completely fall off the bolt. Thank you so much! The nut is a 24MM by the way.
YOU ARE AWESOME!!! I was literally hours away from spending $700 on a new washer. I saw your video and I fixed my washer in less than 10 minutes. God Bless You and know that you are making a difference!!
You are welcome 💥💥💥
I thanked God for you tonight. Your video saved the day for a very sweet lady who has had enough problems. Same issue. Same fix. May God bless your house this week🙏 You may not believe but I do. Message me back when it happens😊
You just saved me from buying a new washer-- we had a professional out TWICE for this issue and they didn't catch it! Thank you so much!!
You are welcome 💥💥💥
I’m so grateful, I saw your video, Yes my machine also has loose screw, easy fixed..
THANK YOU SO MUCH, saved money and feeling proud to be able to repair the washer..
Have a great day and be safe..🙏
You are welcome
THIS WAS EXACTLY OUR PROBLEM AS WELL! I highly suggest checking the pinion nut before attempting any other fixes. In our case the nut had contacted the floor and spun completely off. This probably happened months ago and the washer seemed to work fine, except for the UE error code. Now that the nut is back on and tight the washer is like new again.
THANK YOU. Saved me money and gave me the satisfaction of fixing it myself. Doing the Lord's work! Thank you!!!
RAZ: Rebecca A. Zarate You are welcome
I thank you from the depths of my wallet. Not long ago we had to have the transmission replaced in this washer. We washed a load and the next load would fault UE. Couldn't run another load. Lots of research, greased rods, no good. Watched your video and in a matter of maybe 3 minutes it was tipped up, tightened (24mm or 15/16 both fit the same.) put back in it's spot and the next cycle performed flawlessly. Your video saved me lots of money just wished I found it sooner. Thumbs up given! Thanks again.
You are welcome
Mannn, I was getting an LE ERROR CODE on my top load kenmore elite. After watching this video, I was hoping this was the fix. Opened it up, tip it over. And BAM, it was a loose nut. Just screwed it back on tight. And works like new!! Thanks for posting this!
You are welcome 🙏🏾
A huge, huge thank you. This was incredibly perfectly timed. My Kenmore was making a Great big racket on the spin cycle. Your counsel and advice is greatly appreciated. You are awesome! Thank you!
I guess Im asking randomly but does any of you know of a way to log back into an instagram account?
I was stupid forgot the login password. I would appreciate any assistance you can offer me
@Dustin Jamal instablaster ;)
@Muhammad Emmitt I really appreciate your reply. I got to the site through google and im trying it out atm.
I see it takes quite some time so I will reply here later with my results.
dude, this was my problem too. thanks for the video, saved me a lot of time. I have been getting UE faults for months, and this week I was getting a grinding noise and an LE code. bolt was really loose, tightened it up and it works fine
Bruh you are the best!! Looked under mine and the bolt was completely off! 😂
Very nice. I also tried replacing the suspension rods and springs and wedging foam around the drum. Neither worked. I planned on checking the bottom. I definitely will now! I'll come back to update
@Joseph Martin it didn't work. Neither did installing new ones. It's pretty unanimous that washer is complete garbage so I ended up buying a new one.
Your video helped out A LOT. Thanks. Looked at all possibilities including your solution. The bottom nut was not my problem though, but it got me thinking. The bottom nut was good and tight. And looking at that it stands to reason that if that can spin off then the top nut, just under the tub, could also come loose also. Mine did. Thanks for the heads up
Thank you for this share 👍
Bro, you saved me $700.00 or more. I did have to replace the pulsator assembly. It was hard to remove. Again, thanks!
My man. Making me look good for the wife. Your the real mvp hahaha problem fixed in under 2 minutes lol
lol...You are Welcome
I'm having the same problem. Thanks for sharing..
this might be the best christmas present ever. about to go drop kick my washer over and check this bolt. subscribed!
Lol. Merry Christmas 🎄🎁
Thanks !!! That was my problem on Lg waveForce washer 👍🏽
Thank you, I'll check mine today
TL;DW- Large bolt underneath washer needs tightening. See @ 5:00
Can you tighten it from inside the tub under the silver cap?
God bless you!
I have a top loading kenmore washer that showing a PE code and the washer was bought in 2017 and I need to know what the PE code is and how to fix it
The PE error code indicates that the water level sensor is malfunctional. To fix this: Unplug the washer for 10 seconds. Plug the washer back in, and restart the cycle again.
thank you for your help
Is that a 15/16 nut? Or what size?
i used a adjustable wrench
Kenmore elite top- load washer not working the motherboard has a red light on the back side that is on solid?
Thank you 🙏
Thank you, it help
Welcome 💥💥💥
I am going to work tomorrow the same problem and I will try that.
THANK YOU!!!!! 🙏
Welcome
mine does not agitate but spins, any idea?
Make sure the nut inside the washer that holds the agitator is tight
Here's the problem: Also affects Kenmore Elite 29002 models which are made by LG.
1. There's a recall. Here's the gov website link: www.cpsc.gov/Recalls/2012/lg-recalls-top-loading-washing-machines-due-to-risk-of-injury The recall is bc the Washer Washplate* (Kenmore Part AGZ72909701) comes off while spinning! LG/Kenmore will REPAIR FOR FREE!
2. When the washer washplate comes off, it strips the splines that are inside the washer washplate mounting hole, that the bolt screws through to tighten down the washplate to the inner tub. If the wash plate isn't tightened down, it moves and causes 'unbalanced load' errors.
The frequent 'unbalanced load' error and subsequent shut down is made worse bc the washer has a system designed to rebalance loads on its own. What it does is it adds a little water, then tries to spin again. If it doesn't work, it tries a few more times before it shuts down and give you a UL- unbalanced load code in the digital display. Each time the clothes get wetter and heavier, making the rebalance impossible and then you're having to babysit the washer as it quits 3 times or so per load.
Call LG/Sears. Demand a new washer wash plate, even if it's not part of the recall be the recall defect causes the spines to strip. Hope this helps.
*Explanation of what a washer washplate is: If you look inside the inner tub (where you load your clothes, which sits inside the outer tub) attached to the bottom of the inner tub is a disc that kind of looks like a hub cap/UFO with the 'hub' extending up a bit. That hub is just a snap on cap and underneath is a bolt that goes into the drive shaft to hold the washer plate on. Here's another YT vid where you can see what I'm describing: ua-cam.com/video/4j7J4euNCWI/v-deo.html
Thank you so much!!!!
I watched this video a year ago and revisited this and just noticed your post about the recall. THANK YOU SO MUCH!!
When I called the number listed on the recall the lady told me that it was not on the recall list even though the model number and serial number of my washer is listed on this website. I have a Kenmore Elite 29272 model. She then tried to book me for a service appointment.
@@aaronwolfson1329 Call back and speak with someone different. Sometimes you just get a Customer Srvc Rep that's new or mistaken.
A and E Factory Services is the company that does the recall work. It makes no sense that no one on their end can help set this up. I suspect it's intentional but I won't put on my tinfoil hat.
Ok so just so you know a 24mm socket works. Probably a 15/16 but I couldnt find mine lol
👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽👌🏽🤝🏼
Damn bro,why you so slow.I fell asleep 1 minute in.Speed up.
Dano Karis how about you slow that slow as brain down
He is walking us through his troubleshooting process. I’m thankful he took the time.