Looks great 👍🏻 One suggestion would be to fit the led strip lights into a channel with a defuser. This will distribute the light evenly and your shadow lines will be perfectly straight giving a very clean cut appearance.
If you were doing this in my country, you'll be booked everyday. The clean work is great tbh. People have to move out to get it done here,because they leave alot of dust and dirt. Nice work!!!
Gypsum Academy. Thank you so much. I am building my home own but it is in concrete and I am very passionate about doing wonderful things like that. Thank you so much!
I have got the ceiling job still pending for my house.... and I found your video. And watching Your video I am so confident that I can do it on my own. Thanks for sharing and specially for videography 🤟🏻
Great video, I followed everything that you did and it looks great so far! The only issue I have is that the screws stick out a little bit on the drywall, doesn’t countersink into it for a flushed finish. How do you get the screws to countersink into the gypsum board when attaching for a smooth look? I am using sheet metal screws because the drywall screws do not go into the metal as easy Update: Now I get what you did. After I set the corner beads on with the mud it kind of covered up the screw heads. I then proceeded to fill in any gaps between the top and bottom corner beads with an additional layer of mud, kind of like putting icing on a cake LOL. After sanding it looks perfect you don’t see any screws
Complimenti per il video; mi sarebbe piaciuto vedere come hai fatto il allacciamenti elettrici, magari nel prossimo video!????? Complimenti ancora! molto bello !
What a GREAT JOB YOU DID detailed. I just bought a condo with a 1980 cement ceiling (yikes). I want to do a total drop ceiling with sheetrock to at least 1 big room. What did you use to hold it into the ceiling above? I want to install a ceiling fan for my wife and a bunch of 9 volt pod lights. How would I attached the electric box to the cement in order to hold the ceiling fan up to the poured cement ceiling? I am not sure if I want to farm my condo job to an expert I will need a person to pull a permit possibly. Or do this job myself. I am an old man and a long retired contractor from NY. I use to be a outdoor brake man back in the day. So any help would be deeply appreciated. I look to hear from you regards, William
A beautiful job! Can you tell whether you have used one light strip or two from the inside and outside, please? Also, do you have a similar video with this installation but around a room perimeter? Thank you
Hi next time please show how did you run wiring from inside for led lights facing down I didn’t understand that , how to run wires connected with led light ?
Tools needed to work Gypsum Board
👉 ua-cam.com/video/nNh9wiKIAFE/v-deo.html
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
🍍🍅🌽🍞🍌🍓🥕🌰🍋🍒🥔🥜🍊🍑🍆🍄🍉🍐🥑🥦🍈🍏🥝🥒🍇🍎🥥🌶🍭🍫🍬🍡🍔🥩🥪🍲🍙🍖🌭🥘🍘🧀🍕🍳🥫🥞🍟🥚🍱🍔🍔🥙🍿🥖🥓🥗🥗🥐🍗🌮🥣🍹🍽🍸🥢🍷🍾🥃🥂🥂🍵🍻🍺🍺🏺🔪🥄🍴🍣🍦🥧🍢🍰🍰🍠🥠🎂🍯🍝🥟🍪🍮🍜🍡🍩🍭🍛🍥🍨🍬🍚🍤🍧🍫
🌶🌶🌶🌶🌶🌶🌶🌶🌶🌶🌶🌶🌶🥒🥒🥒🥒🥒🥒🥒🥒🥒🥒🥒🥒🥒🥜🥜🥜🥜🥜🥜🥜🥜🥜🥜🥜🥜🥜🥕🥕🥕🥕🥕🥕🥕🥕🥕🥕🥕🥕🥕🍋🍋🍋🍋🍋🍋🍋🍋🍋🍋🍋🍋🍋🍌🍌🍌🍌🍌🍌🍌🍌🍌🍌🍌🍌🍌🥑🥑🥑🥑🥑🥑🥑🥑🥑🥑🥑🥑🥑🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥔🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖🥖
🍆🍆🍆🍆🍆🍆🍆🍆🍆🍆🍆🍆🍆🌽🌽🌽🌽🌽🌽🌽🌽🌽🌽🌽🌽🌽🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇🍇🥝🥝🥝🥝🥝🥝🥝🥝🥝🥝🥝🥝🥝🔪🔪🔪🔪🔪🔪🔪🔪🔪🔪🔪🔪🔪🍡🍡🍡🍡🍡🍡🍡🍡🍡🍡🍡🍡🍡🍠🍠🍠🍠🍠🍠🍠🍠🍠🍠🍠🍠🍠🍳🍳🍳🍳🍳🍳🍳🍳🍳🍳🍳🍳🍳🍖🍖🍖🍖🍖🍖🍖🍖🍖🍖🍖🍖🍖🍾🍾🍾🍾🍾🍾🍾🍾🍾🍾🍾🍾🍾🎾🎾🎾🎾🎾🎾🎾🎾🎾🎾🎾🎾🎾
He worked throughout very professionally and neatly except at last when installed LEDs so roughly.
Looks great 👍🏻
One suggestion would be to fit the led strip lights into a channel with a defuser. This will distribute the light evenly and your shadow lines will be perfectly straight giving a very clean cut appearance.
If you were doing this in my country, you'll be booked everyday. The clean work is great tbh. People have to move out to get it done here,because they leave alot of dust and dirt. Nice work!!!
Very well explained! was looking for the process everywhere but only got more confused. I'm very much clear now! Thank you so much:)
ua-cam.com/video/P-rw8j6Axmc/v-deo.html try this video plz
great video, I'm researching to do a big project on my ceiling next year, thanks.
this is really cool, from the workmanship to the result!!!
I'm vietnamese.
The ceiling is so beautiful
Gypsum Academy. Thank you so much. I am building my home own but it is in concrete and I am very passionate about doing wonderful things like that. Thank you so much!
I have got the ceiling job still pending for my house.... and I found your video.
And watching Your video I am so confident that I can do it on my own.
Thanks for sharing and specially for videography 🤟🏻
Please share your experience after you do the job.
Saludos desde Chihuahua México te admiro karnal, siempre ayudando a la gente!!!
Working on this at my living room. The frame is installed. It is 10' X 20'. Thanks for the instructional video.
Good job sir..you are very talented..thanks for sharing this video ..
You're amazing. 1 million thanks for this video.🥰🤝🏾👏🏾
How did you run the wiring, and from where did you run them?
At the start of the video the concrete in the sealing is cut for cable
Great video, I followed everything that you did and it looks great so far! The only issue I have is that the screws stick out a little bit on the drywall, doesn’t countersink into it for a flushed finish. How do you get the screws to countersink into the gypsum board when attaching for a smooth look? I am using sheet metal screws
because the drywall screws do not go into the metal as easy
Update: Now I get what you did. After I set the corner beads on with the mud it kind of covered up the screw heads. I then proceeded to fill in any gaps between the top and bottom corner beads with an additional layer of mud, kind of like putting icing on a cake LOL. After sanding it looks perfect you don’t see any screws
I just made two works on the sailing of my house thanks to you
very professional and the final result is very beautiful and amazing.goof joob...👍👍👍
beautiful work bro, fantastic work!!
The skill of a standard plaster ceiling maker
Thanks so much I would like to know material to use when making floating ceiling for gypsum
Awesome Interior Design😍❤️
You really have bigger talent good job bro 👍
What size track are you using please ? The smallest Ive found so far is 50mm. But that looks smaller.
what kind of tubular is that bro? so thin you can cut it a cutter
Awesome brother, God bless you 👍🏻
훌륭하십니다,,멋진 유익한 영상 고맙고 아주잘보고 갑니다,,항상 행운이 함께하시길 간절히 바랍니다,,화이팅하세요,,화이팅,
Great video! Thank you!
where do you buy the metal studs? I could not find at homedepot or lowes.
Complimenti per il video; mi sarebbe piaciuto vedere come hai fatto il allacciamenti elettrici, magari nel prossimo video!?????
Complimenti ancora!
molto bello !
Good sharing my friend..gybsum.bord
Mike Tyson?
lol
Thomething 😂😂😂😂
New subscriber from philippines
excelente trabajo!! dudas: Que tornillos usas? no se afloja a lo largo del tiempo si solo es tornillo? no sería mejor un remache?
What a GREAT JOB YOU DID detailed. I just bought a condo with a 1980 cement ceiling (yikes). I want to do a total drop ceiling with sheetrock to at least 1 big room. What did you use to hold it into the ceiling above? I want to install a ceiling fan for my wife and a bunch of 9 volt pod lights. How would I attached the electric box to the cement in order to hold the ceiling fan up to the poured cement ceiling? I am not sure if I want to farm my condo job to an expert I will need a person to pull a permit possibly. Or do this job myself. I am an old man and a long retired contractor from NY. I use to be a outdoor brake man back in the day. So any help would be deeply appreciated. I look to hear from you regards, William
Hi sir how are you thanks for your service
Kereeen mas.. Aku mau buat di kamar lah
I am Pakistan. So beautiful your vedio.
Awesome, Great job! Thanks for for that.
A beautiful job! Can you tell whether you have used one light strip or two from the inside and outside, please? Also, do you have a similar video with this installation but around a room perimeter? Thank you
Try this video plz
@@pvcmasterindia3806
Good job..... Nice broo
Very interesting 👌 and 🙏 informative.. thanks for sharing
Tolles Video💪 Vielen Dank für die Idee🥇
Fabulous video, thanks.
Amazing work 😍😍
Great job!! What type and size of metal frame did you use?
Nice job 👌👍👌👌 I like
Bjr excellent travail l éclairage des leds est indépendant des spots ou c'est la même alimentation ?
very nice work
Me gusta mcho tu trabajo soy de guatemala city felicitaciones
I like it so much how can i work with you Sir...🤗❤
What is the name of the sides which you put as a design? That screen-like thing.
nice share ❤️☕
Hi next time please show how did you run wiring from inside for led lights facing down I didn’t understand that , how to run wires connected with led light ?
3555eالاااباااتاا
Good job brother😊😊😊
ua-cam.com/video/P-rw8j6AxmcA/v-deo.htmlnd shere kro plz
Beautiful work: please upload more videos
Thank you for that sharing,sir.
Is the position of the hidden lighting correct?
Thank you so much for 5his video, I did it in my house it came exactly the same
🍬🍬
🍫🍫
🍭🍭
🍉🍉
🍋🍋
Great tutorial! Do you have dimension of the width, length of the floating ceiling?
I think each design has to be customized to the space it will go in
Can u do my kitchen like this :)
What are the tracks that u used called
Great job 👍❤️
Cool tutorial. Are those CD profils?
We Need More Video from starting to end of Gypsum Work.
Amazing work.
Great! Thanks for sharing! Can you also do a video on how to install ceiling like that but has curvy design?
very good , thank you bro form sri lanka
Are you using a remote with the rbg lights since the push button adapter is on the top
Good..👍👍👍👍
Wow.. nice👍👍👍
Very clear process ...
Good paint design 👍🤙
Love your work!
Awesome my friend!!!
Hi, new here... please what's that iron called
Awesome great job sir...
Beautiful bro
Nice . it's excellent work.
Boss if you have a brick wall could you shoot nails or would it not hold
What kind of vacuum cleaner do you use ? Looks awesome having it on you're back i would need one of those if they any good.
can you use wood instead of the metal frame ?
Well done mate looks great
If it’s a concrete ceiling, how did you run the power wires to the light fixtures, or were the wires already in place when you started?
Looks like a runner on the left side. Did you cut a channel?
good job Brother..
New friend, Goodluck and GODBLESS.
Good job and rely on yourself
The plastic to catch dust when drilling overhead 🤯
Nice work , but I want to understand how was the connection made
Where can I learn how to build a basic gypsum ceiling to put in my sister's home.
Did you watch the video or not?? Thats the answer in your question were you can learn.
Hi bro can we do animal cell as celling??? With gypsum
I mean, any design possible with gypsum
Good projects... 👍
Awesome 😎😎😎🔥🔥🔥❣️💯
I like that kind of selling can I get more videos
Una pregunta mi amigo cuanto se puede cobrar por este trabajo , gracias por su tiempo y enseñanza
Very cool. I was just drawing something similar.
i like this, please can you help me with the basic tools involve. thank you.
Can gypsum board be used as Partition walls
Very nice . I'm Electrician
Fantastic job any chance of getting plan or measurements please