The New 2025 Ram 1500 | 3.0L Hurricane I6 Engine
Вставка
- Опубліковано 9 лют 2025
- With the power of two new available 3.0L Hurricane I6 engines-you’re about to meet the Strongest Ram 1500 Ever.
Explore the 2025 Ram 1500: www.ramtrucks....
Preproduction Ram 1500 shown. Actual production model may vary. Coming Q1 2024.
Subscribe to Ram Trucks on UA-cam: / ramtrucks
Follow Ram Trucks on Social:
• Facebook: / ramtrucks
• Twitter: / ramtrucks
• Instagram: / ramtrucks
• TikTok: / ramtrucks
• LinkedIn: / ram-brand
Just traded a ‘19 for a ‘23 so I could have a newer Hemi to last me many more years.
How did you make out on your 19? I’m in the same situation and can’t decide what I’m going to do 🤔
@@superfanbill89 part of the reason I traded was what they gave me. I got 27k on trade in August. Big Horn long box 55k miles. Paid 29.5k in 2019. Used lots were still pretty bare and the new lot was filling back up so timing was great. They sold my 19 for 32k three days later.
Ya and you’re the reason they think they can keep charging though prices. 19 is old? Ha
@@shiningstaer I didn’t ever say 19 was old. I said I wanted a newer Hemi. I just happened to buy at the right time and had the opportunity to upgrade at a great time. You’re telling me you wouldn’t do the same? Ha
last you...its a dodge bro lol. youll need a new one in 4 years
with all these manufactures going turbo I sticking to the old school V8 .
Good for you, I'm sticking with the steam enegine
Something tells me the turbo will put too much stress on this gasoline engine.
I don't care for over-stressed small=displacement engines.
@@claiborneeastjr4129
What is your source for asserting those engine are over-stressed?
You people act like your fireman will shrink without those two extra cylinders.
This engine seems very promising to me. Its difficult to let the hemi go but people had difficulty letting the 318 and 360 go. After a few mfg hiccups, I hope this thing will be great.
Any word on mileage??
It "seems" promising. As you said it.
But only time will tell if this design is rugged/resistant enough for daily use.
We know Stellantis for something else than reliability.
My 318 is still going 40 years later I would say strong but it never really was lol
Great truck!! How about we stop buying new vehicles until they lower prices. New vehicle prices are out of control.
Can’t beat an I6. Perfectly balanced, lots of torques, super realiable. Look at the old fords with the 300 i6 most are still on the road. BMW I6 are pulling over 300,000 miles ( everything else fails, engines are solid lol) Cummins 5.9 and 6.7, super reliable, dodges old slant 6, super reliable, jeeps 4.0 i6 super reliable. I’ve been waiting years for one of the Big 3 to bring back an I6 with all the modern tech, RAM has done it. Now I just need to wait 20 years to be able to afford a used one lol
I drove the new 25 Ram with this hurricane emfi and it felt very responsive and quick but the truck also felt very light and the sound wasn't as deep as I'm used to on the v8 5.7 Hemi. The interior and quality seemed a bit off to me compared to my 21 Laramie so I don't know
Chevy has offered the 3.0l duramax for a few years now and they seem to be a solid motor so far. Looking forward to seeing how these hurricane engines hold up.
No one will bag on an i6 engine as a xesign. It's the fact that there's no replacement for displacement when it comes to towing.
Now that’s a valuable information im more optimistic and excited for the RHO !
you're so right. straight 6's are my favorite. noise is better than a v6 in my opinion. I had the 335i and I loved that engine. you're spot on about everything else failing though lol
If RAM pokes one in a regular cab I'll continue to be a customer!
regular cab and 2 wheel drive and make it look old-school with some fattie tires on the rear.
Single cab short bed 4x4. Something to compete against the Ford with the coyote for an off the assembly line race truck
Wish it had port injection as well to keep the valves clean.
If you DRIVE your car every now and then and get the RPMs up the valves won't get coated with gunk
And a dipstick for the oil.
@@JohanasonI have a direct injection bmw 335i. Driving has nothing to do with whether or not carbon buildup happens. Cleaning the valves is regular maintenance on this car. Do you know about cars?
@@BumpTune8462 100%
Kaboom! The sound that engine will make 20 miles after the power train warranty expires.
You ever heard of the leaning tower of power? You can run a slant 6 without any oil for a couple hours. Don’t count dodge out.
@@86_Bullnose You can’t compare the old inline sixes to these new engines with turbos. Not even close.
Well it's going to be in trucks SUVs and jeeps for decades to come so I hope Dodge did their due diligence when it came to R&D
@@conan6267 Pretty sure Carlos fired everyone in research & development and quality control.
There's a reason why class 7-8 trucks only use INLINE 6 motors.
I’m looking forward to an Ike gauntlet run….
😂 I came here to say this! TFL FTw
@@clipse2701😂
6 in a row ready to tow. This engine will put the Hemi to shame.
@@Kaleptoediting but sound like a vacuum cleaner
@@Kaleptoeditingwill it get the shift flair Aisin, or the 68rfe 😂 ram can't put a transmission on a truck that won't blow up.
I have had a 2019 Ram 1500 Classic 5.7 hemi for 2 years now. All normal maintenance done, I have never had a check engine light or had to do any repairs not even once. 62K miles right now.
if it can last as long as a 5.7 im all for it
Agreed but there's no way
I6 is one of the best engine designs out there, the problem is that high specific output and turbocharging usually makes for a less reliable engine. Understressed, large displacement mills last longer with less maintenance, that's just a mechanical truth.
I'm sure it will be a great engine, I'm just not sure it will be a reliable one. But I have no qualms about the I6 architecture, I6s are great.
YES - Understressed, large displacement mills last longer with less maintenance, that's just a mechanical truth.
When you make everything forged in an engine it will take more boost without more wear. The internals can probably go up to 800-900 hp, like bmw b58. If you have low-mid hp on crazy internals it's bulletproof
They're making lotus hand grenade engines in trucks now 😂
I had the inline 6 on my 09' 335i and it was an amazing engine. Never had a problem with the engine itself. It was all the other parts that were failing on me. Water pump, electrical work, battery problems. But the engine itself was awesome.
@@jjpark1989 n54 is pretty amazing a lot of bmw i6 are amazing, but unless it's a big displacement diesel, it's not for towing.
This is cool but I am concerned about the longevity of a turbo engine.
You’d be lucky to get over 100k miles on one without any serious and expensive issues occurring. Much less 200k miles. Especially in any full sized vehicle. The Hellcat can get 400k-500k miles relatively easily if not beat on super hard all the time and routine maintenance is done. They are pretty much bulletproof motors.
@@Abilesimo You clearly don't understand who Stellanits is
@@fxrsniper1 Its time for you to join us in the year 2024, grandpa. This ain't your 1998 Dodge Caravan.
@@jordan9610 are you challenged?
@@Abilesimo500k on a 6.2 is not gonna happen. Also, these I6 are going to be bulletproof. Dodge can't build a transmission to save them, but they make legendary engines.
One of the biggest reasons people buy Ram trucks is for the Hemi. It’s a well proven, reliable workhorse of an engine. The Hurricane may be a good engine, but it will have to prove itself like the Hemi has. I’m not against innovation at all, but I wouldn’t touch one of these until they’ve been around for at least a couple of years, so there’s time to see if it’s going to be reliable.
Yeah hemi takes a licken and keeps on ticken 😮I mean still running
2024 yes sir
The HO engine will probably be available only in the top trims.
its from the rebel up but standard on the limiteds
Not available on the Rebel
Every inline 6 has the same firing order....lol
Well if they had to replace the v8 with any other engine I think the I6 is the best option. Great platform
3l is a little disappointing though. 4.0 would’ve been awesome barra competitor
Agreed but in the world market 3.0 L is a cap.
@@user-rg4wp7xw9n It has a turbo. That is called replacement for displacement.
@@TheWeavingBagel it has 2 turbos that are pushing 22psi onto the (aluminum) block. It will not be as reliable as the hemi, they should have made the displacement a little larger and used lower pressure turbo/s
@@user-rg4wp7xw9n Good point. I'm assuming the displacement and turbo setup is for efficiency reasons. I have seen some reliable engines that have cast aluminum blocks and forged aluminum internals.
On a different note, after seeing what the S58 and B58 were capable of, I am interested to see what the tuning world will find of this engine.
dude idk why everyone (or at least a majority) hates the new i6. its a lot better than the hemi, especially in terms of power
I just took delivery of a brand new ram rebel (company truck) and drove from Tampa, FL to Atlanta, GA, average mpg 18.1. I did 75 mph, all interstate, on cruise. My past trucks could of pulled this trip while averaging 21-22 mpg in same conditions with v8 and well over 100k on the odometer.
What is the gear ratio on it?
Good thing I have my hemi challenger and my cummins rams 5.9 and 6.7 so I'm set for a good 20 years or so
And about one million miles a piece
Cummins is an I6 too
Kudos to yall for doing something different love the inline 6.always make great power with boost.Just appease your regular crowd and put the v8 as an option in everything.
An inline 6 is great. Think about the slant six an icon. I would have liked to see more displacement with the turbos. Lower horse power for the truck engines with more torque. Design them for reliability don't be cheap like Ford and install a rubber belt to drive the water pump and then recall hundreds of thousands due to belt issues blocking the oil inlet tube or breaking all together. I hope they just build a reliable engine (no Displacement on command) with a reliable and easily serviced timing system, and recommend oil changes at 5000 miles not 15k.
The engineers can do it, but the bean counters get the last word.
The old OHV engines in the late 60s were some of the best built engines ever. If you upgraded the design with EFI (Port and GDI), High quality roller lifters, good flowing heads and higher compression you would have a bullet proof engine. Oh Yea: There is no replacement for Displacement.
I would love to see the dislikes counter on this video
Will miss the Hemi but it is evolution in will miss the sound of the Hemi! Period
I hope it has more than 4 head bolts/cylinder and that somebody smarter than the guys at Ford and Audi ran the timing chains!! Lots of potential if it was done right!
Underrated comment. Heck even Toyota can't build a reliable turbocharged truck engine. Those 2022+ Tundra engines are eating crank bearings and pistons faster than an ecodiesel LOL
I did some digging and I can't recall how many head bolts but I can tell you it's a Closed Deck Block which means it's going to have much less
issues with head gaskets than all of these open deck blocks.
This engine is made by Chrysler corp it's a stellantis engine
@@fxrsniper1 No one said otherwise.
Bring back the ACTUAL RAMCHARGER!
Looks like I'll be buying used trucks for awhile.
I'll be running my 4th gen into the ground
why because you’re so obsessed with having 2 extra cylinders 🤦🏻♂️
@zBPS no, the I6 is a fine engine - the new trucks are not going to be cheap even base, so I'll be hanging on to my Hemi until I'm in the market for newer. Even so I just prefer the body style of mine so I will wait to see what happens to the Classic in the future and also looking forward to seeing what's next for Heavy Duty. Overall really liking the lineup, but trucks are getting pricey.
@@PeteValence Ah got it, I see what you mean
Why what’s wrong with turbo charging
Imagine how dope it would be if they used the new engine design principles on 8 cylinders
Basically a S58. The power bump is great, but if you are concerned about horsepower you might as well get an electric truck. You can’t make up for the rumble of the iconic hemi.
You expect an I6 to sound like a v8? 🤦🏾♂️😂
The hemi had soooo many reliability issues. Our fleet at work is all hemis and they get this ticking knocking noise which becomes a death sentence for it. We had probably 25% of our fleet engines replaced because of this and they are between 30k-75k when it happens. Pricey repair and takes a while which is a big inconvenience. Something to do with the lifter being out of place idk exactly but I wouldn’t own one.
@@evanl889the hemi tick exists in all models and generations you can get a brand new hemi and withing a few weeks it will start ticking
@evanl889 the MDS is they problem if the stop using that in them it wouldn't be a problem I have a 05 without it and have not had the hemi tick.
All of a sudden I love my 5.7
How about putting a twin turbo on the Hemi instead? Or at least give us the option to still be able to buy the Hemis!!!
I was thinking the same thing
Toyota Tundra's biggest selling asset was the reliability of their 5.7 V8. Once Toyota changed over to small displacement 6 cyl turbo motors their reliability went to pot. Fifth generation RAM's 5.7 V8 backed by their 8 speed transmission has proven to be a great and reliable combo. I sincerely hope they don't suffer the same adverse outcome that Toyota fell into with these small displacement turbo engines in a half ton pickup. I will keep my 2019 RAM Rebel 5.7 for awhile and let everybody else be the guinea pig owner of these turbo 6 motors.
It's amazing what they're getting out of 2 L inline fours and something like this which is absolutely mind-boggling! I love technology
We love ya Tim. Build mine well. 😊
Until you show me that engine can consistently last 250k plus miles without major repair, count me out. I bought a 2014 hemi brand new, all maintenance on time, got 320k on it now and it’s just now starting to use oil
Put it in the gladiator please. Love this direction.
Is that usable HP and Torque or peak HP and Torque?
Likely peak
Turbo engine torque typically peaks at a much lower RPM, so more “usable” vs. an engine that has to be revved to the moon for peak power.
Be good to see what rpm peak hp and torque are made
YES
GREAT JOB TIM!
I usually buy a new Ram every 4 years or so. I find lately they are offering less for more money these days... I have a 2021 built to serve edition right now, I am really not too sure I want to part with it. This is by far my favorite over many years, so unless the 2025 really impresses me I will stick with what I got...
I have a feeling that the in-line six will not disappoint!
Good move! Don’t get a Hurricane Ram. That HO Hurricane has a very complicated cooling system that is fragile, and the SO Hurricane is barely more powerful than the 5.7. If you want a new Ram, I’d get a 2024 Hemi. Trucks should sound like trucks…not Honda Civics!!
@@applianceman6009 lol trucks have had inline/ slant 6s in them for over 50 years. The ford barra is the most bulletproof engine ford ever made. The slant six from dodge was in production for over 25 years and is legendary. U don’t know what you’re talking about.
@@isaacwykes636 They weren’t turbocharged, so they did not need an advanced liquid cooling system. This is a completely exotic and new inline 6 design. The old 4.0 Chrysler I6, which was developed by American Motors prior to the Chrysler Jeep buyout due to bankruptcy, was one of the most bulletproof engines I have ever seen. This Hurricane engine is nothing like those engines. Chrysler never did make good turbo engines. This is a European-based engine. Time will tell.
@@applianceman6009 what drugs are you on
i6 > V6 . Looking forward to this for sure
What does the standard put out?
will the HEMI be available as an option still?
no
Did you even listen to video😂
funny part is my 2022 limited 5.7 etorque can tow more than the highouput I6 my trucks rated for 11,052Lbs and 1,373 payload then the high output i6 is rated 10,740lbs 1,370 payload LOL looks like ill be sticking to used 5.7 1500s or get a cummins
@@TomGunnZyour truck can probably tow about 7k lbs based on the fact that you have a limited and likely a 4WD. Look up your towing capacity online according to your vin. The only 1500 pulling that much is a 2wd tradesman, quad cab, with a Hemi & 3.91 gears.
@@brandon6712 11,052Lbs and 1,373 payload is what my vin says and is rated and the options i have with 4wd... the max towing of 12,750lbs is what you stated with tradesman 2wd and 3.92
When they will start coming to showrooms, I am getting a 2 years old, cert, low miles Ram 1500, Limited, HEMI. Overall, the best block out there. Perfect, NOPE, but had done well on American roads. If the new block will be reliable as the HEMI, Dodge/Jeep will do very well and sales will be fantastic.
When dodge released the demon they said no replacement for displacement. Now they say more horse power per litter.
Just bought SST. Engine power seems good but the dam thing sounds like a Prius, especially in the first 60 sec after it starts.
We will see if the engine is solid in a few years.
I had one of the DOHC Neons when I was younger and that engine could take a serious thrashing! I wondered back then what it might be like with 2 more cylinders inline. Now I know 😊. I bet a N/A version of this could outlast the classic SLANT 6 but I cant see those turbos lasting that long.
To all the people saying they don’t care about the power and torque and mpg I don’t understand who wouldn’t want more power yea I love the noise but don’t y’all like the feeling of full gas down the highway i mean I love my truck and by the way I own a 2019 dodge ram 5.7 hemi I like the v8 rumble but that 540 hp with the potential of 1500 hp with mods is insane
This will not get even a fraction better mpg. Mpg is a result of aerodynamics and how aggressive you are with the throttle.
@@VanquishedAgainand you need to run premium fuel for best results, which means the gains you make in mpg goes out the window with 40 extra cents per litre for premium
Why would I pay more for less towing capacity?
@@roest6805where was less towing capacity mentioned?
I wonder if the cam/lifter issue will carry over...But then again they did build the slant 6 which was a great one
Do we still get broken manifold bolts standard?
Tick tick the studs broke
The unbroken manifold bolts is a $295 option…
Where tf is my AGGRESSIVE V8 AMERICAN ENGINE!!!!!!! IDC HOW MUCH POWER I WANT A V8 Looks like I’m getting a new Chevy or ford
I just looked at a 2025 Longhorn with this HO I-6 here in Pensacola. $75,000 plus TTL? Keep it and I'll Keep my 10 year old 5.7 Hemi Laramie Longhorn....8 years of OVER $1,000 a Month? Insanity....
Bring back the shorty with a hemi. Short bed, single cab, V8. Make the damned thing affordable to the average person too, would ya?
I really hope the Ram with the hurricane goes for grand wagoners price lol
Lol nobody would buy it even if it did. We want the Hellcat. “If it ain’t broke don’t fix it”.
Is it better than a 2jz ? It actually looks cool!
They gotta release more data on this Hemi inline 6
Thank God the RaptoR still has a V8
This had to be the test vehicle they used for the hurricane
Holy Jesus lol wow that’s gonna be lit 😆
Product tester please, lol. Can’t wait!
It will be years before this is reliable and lasts 300k miles. Have a 2020 hemi and will try for a late 2024 if possible.
At that power level to displacement it will NEVER last 300K miles.
@jfdb59 yeah just like the ecoboosts, Ford dealer told me they are built to last 5 years or 150k miles. Planned obsolescence
Just like Toyotas new Twin Turbo V6 in the Tundra's and Lexus' that have main bearing issue, this motor may have issues. There is no replacement for displacement. I6 may be different design, but asking a smaller motor to do the work of a V8 is iffy. I do hope the Hurricane does what they say it will do, particularly for reliability and longevity.
This looks good for european buyers! I've heard of an LPG version for Europe too, which is awesome.
2 turbos, what could go wrong 😂😂😂😂😂😂😂😂😂
Yes it has more power.. but it doesn't have that V8 rumble that we all love..
No rumble is a fumble for RAM.
You mean the lifter tick?
I dont think the V8 should be replaced but I would like to see these as options too
My TRX is 702 hp and 650 lb ft of torque monster 😂😂😂 and no thanks to that lawnmower 😂
RAM Trucks .
Bring back the Legend.
Bring back the Hemi V8
The V8 is the best engine for a RAM . And no infladet 3l
My Suggestion
RAM 1500 = 6.4L V8 450 HP
RAM 2500/3500 = 6.2l compressor V8 530 HP
RAM TRX with 6.2 V8 750 HP
develop a new V8 to replace the old ones
3500
I mean I’m gonna miss the v8s too, but it does cost a lot of time and money to develop a motor
Please give it dual injection so (hopefully) the intake valves get cleaned from buildup. I'm still excited as long as it holds up reliably.
They're comparing horsepower per litter to the Demon 170 because they think you're dumb
This will be the dumbest mistake. I predict the quality won't be that great either. New design will likely have issues. You guys never really got the HEMI or the ECO diesel totally perfected, so why should we trust this?
It's been out for 2 years already and I haven't heard of issues
I6 is wayyyyy wayyy more reliable than the ecodiesel, only reliabilty issues youll have possibly have in the long run , this applies to turbo engines are the turbos itself
But how many have really sold if it's only in the Wagoneer which is like $100k@@RAM-KINGOFTRUCKS
It should be yes, but this is aluminum and under high pressure turbo and probably GDI and not all that big at 3.0L I'll still wait and see@@TomGunnZ
@chickenfarm09 sold 37,000 last year in 22 this year don't no yet but lots out there and no issues with motor..👌👍
Don't you wish you had a V8? 💜💜💜
I smell 0W-5 oil, spun bearings, parts shortages, and blown engines before 80,000 miles.
This is definitely going to drive up the price of used trucks, lovely.
Inline 6 cranks are so much easier to balance. Should last longer. Hopefully they put a higher volume oil pump to save the lifters and cam at idling unlike the current hemi.
I’m sure the lifters will be fine. They will have a nice spot on a museum shelf where they belong.
What is the sound like though?
It’s the New 3.0 Hurricane Inline 6 Cylinder Engine for the Truck. And the 1500 Ram trucks don’t need the V8s No More.
Now the 6 cylinder Engine.
The Twin Turbo 6 Cylinder Engine. I will upgrade the Turbo to Make the Sound Nice And smooth Tone. Sounding like A Supra by Toyota.
This seems like a really good option for the Wrangler/Gladiator, Grand Cherokee and maybe the Chargers (which it will be offered on next year) Not 100% sure about Truck use. IF they can make them not burst into flame like the Ecodiesel, might be a good option for half tons
Not a turbo fan,reliability should be #1 not power. Give me a non turbo version with 300hp and 350tq.The old 300ci ford sixes were an example of reliability,still powering many UPS trucks to this day!
At least its not V6.
Will the air intake needs for the turbo allow you to use a snow plow ?
This might be the dumbest comment I've ever read
It's rammin time
Excited for it to cost 60k plus.
should have called in the Slant six instead of hurricane
SOB I just bought a new 2023 Ram truck. Damn it!
If I were you, I’d keep the 5.7 2023 Ram. It is not a complicated engine, and it is a truck that sounds like a truck. The Hurricane may have more power, but the Hemi’s power is plenty! I wouldn’t want my truck sounding like a Honda Civic😂.
What honda civic has an inline 6? And inline 6s souns great.
Quit beinf a v8 boomer @applianceman6009
@@riogrande163 stop being a troll and honda did produce an inline 5 for 10 years, let me give you a chance to stop now before I school you....
I like it. What’s the MPG’s?
At the end of the day it's all about charging more for less manufacturing costs. Raw displacement will always win over technology. The inline six seems interesting but doesn't rub me the right way in a Ram.
Love my Hemi but ill see what prices are before i decide 😊
i saw the hint of the prices somewhere and it will be approx 5 - 10K more than the current model with higher trims toping out to nearly $110-120,000 towards the heavy duty pricing in CAD
@@TomGunnZ 🫨😳😫
@@TomGunnZ pd 57000 last week for a 2025 RAM 1500, traded in a 2019 RAM i1500 perfect condition with 22,000 miles for a 35k trade in and 2.9 interest.......they really want to deal that i6
More HP and torque, but at what RPM? Not at all sold on a 3.0L twin turbo for a light truck application.
6100 rpm is max power
Yeah, but turbo engine torque peak is typically at a lower rpm than NA engine. My twin turbo V8 puts out max torque at 1800 rpm & stays there thru 4K rpm. My old Hemi torque peaked north of 3500 rpm.
Kinda sad Ram. Trucks aren't BMWs.
It has like 1 more mpg probably
In my opinion I think an inline 6 motor is the best configuration… gas or diesel…. To be fair, my 5.7 hemi has 290,000 on it and I’ve only done spark plugs and oil changes… if this motor can be just as reliable I would buy one…. ( chances are with twin turbos probably won’t be… maybe a single turbo would be good )
How much mpg?
I6 has potential if manufacturered right. Can dodge deliver?
Twin turbo a v8 what kind of MPG would it get?
MPG?
It's probably about the same as the HEMI.
Twin turbo inline 6 this could be a great motor.
No v8 option=death wish
Only time will tell. These engine will be great for performance. Longevity will be the golden test. More than likely these engine will be like the Ecoboost Ford has. Pull a 8000lb load for 100,000 miles with no major malfunction. Do this and I am impressed!
It's made by Stellantis not Chrysler so it will be good
Only because of the twin turbos. The Hemi was naturally aspirated.
What fuel economy ?
Why not twin turbo the Hemi. Now thats way more horses than the I-6
And way less mpg so they have to pay millions in fines. Mpg must go up and emissions have to go down to stay in business.
Yeah dude. Just twin turbo it 🤦🏻♂️
Would you like em sticking out of the fenders or hood ? Only so much real estate and cost comes to mind.
A twin turbo HeMi wouldn’t pass emissions that’s not how that works,,, and plus they would get worse mpg than the I6… stop tryna find solutions we already got one
Fingers crossed my ecodiesel Rebel lasts for a long time.
And no engine oil dipstick from what I’ve read