Home Made Canoe Sail Rig Overview

Поділитися
Вставка
  • Опубліковано 21 гру 2024
  • How I made a home made sail rig for my canoe. Do it yourself sailing.

КОМЕНТАРІ • 14

  • @scottdean7613
    @scottdean7613 Рік тому +1

    Thanks, watched your video while I was getting ready to go out and start my rigging.
    Probably use some of your ideas. If nothing else you saved me some trouble.
    Have you ever been hassled using a sail without canoe being licensed? Here in Iowa my 14' does equipped with sail.

    • @travelbywater9378
      @travelbywater9378  Рік тому

      That rig worked well for me when everything was closed during the pandemic,, halve since switched to a commercial off the shelf rig, bit something like that should get you started.

  • @norbertrohrmuller6792
    @norbertrohrmuller6792 4 роки тому +2

    Hi, I found your channel today. It's a funny coincidence. I also made a sail for my 17" aluminum canoe and sailed between petrie island and the rideau waterfall this summer.
    Can you give me a clue where I can get used sails cheaply? I hope to see you guys on the Ottawa River next summer ;-D

    • @travelbywater9378
      @travelbywater9378  4 роки тому

      You can pick up dinghy sails off kijiji a lot of the time. Most dinghy sails are pretty big for a canoe though. Optimist sails are good. They can be had pretty cheap even new.

  • @jackrabbit5047
    @jackrabbit5047 4 роки тому +1

    Long Sault? Looks like a very nice setup.

  • @kingoftacoland
    @kingoftacoland 3 роки тому +1

    Have you found the leeboard to be redundant because of the outriggers?

    • @travelbywater9378
      @travelbywater9378  3 роки тому +1

      No, the boat sails poorly without the leeboard. The outriggers don't make much difference to sailing performance, they might actually make it worse, but they do provide extra stability.

  • @dianegordon5366
    @dianegordon5366 Рік тому +1

    Why oh why is marine glue so expensive?

    • @travelbywater9378
      @travelbywater9378  Рік тому

      I don't know, but it is. A gallon of West System Epoxy and hardener is almost $300.

    • @zanderdev57
      @zanderdev57 11 місяців тому

      Because they know you'll buy it. There has to be some substitute somewhere though...

  • @DowneastThunderCreations
    @DowneastThunderCreations 4 роки тому +1

    👍