Clunking noise? Excessive engine movement?**2009-2014 4th gen Tl Front Motor Mount swap!**
Вставка
- Опубліковано 12 вер 2024
- I have been feeling excessive engine movement and clunking noise when shifting. Found out my front motor mount is completely shot. I have never done it in this year TL,so here we go!!
Cool that you posted this video..I recently had mine down at a shop. The after market mounts will still have a vibration...at least with mine it did. I took it back to the shop and they said there wasn't a labor error issue. We did have to slightly modify a few mounts in order to fit. Next time I will order my mounts from the dealer..I want it to ride like it was when it was new.😎. I believe there is 1 in the front, and 2 on each side .
I almost bet they didnt let it rest before tightening the bolts. Meaning once the mount is mounted. Start it and let it idle for 30 seconds so the mount can rest where it needs to be. Then tighten all bolts completely. Mine doesnt have any vibration and feels like the oem.
Yup. 1 front and rear-2 both sides.
@@FlipSideGarage preciate that info..
@@FlipSideGarage so, the Mounts need to be take loose again, and retighted after reset?
@@AcuraChannel Anytime man. Have a good night.
I hear a clunk when i press and release gas pedal from the engine on my crosstour 3.5L . How did you know it was the front and not de rear mount?
Excess movement of the motor will always result in a clunk noise. The rubber in the mounts just deteriorate overtime and break from the mount itself.
@@FlipSideGarage do you have a test to do to know if it is the front or the back one ? Or the best is a video
@@rankytonky you will have to ask a friend to put it in reverse and or drive while watching the motor motor. If motlr mount is completely bad. You will def hear it clunk. If it moves to much when putting in D or R. That would also cause it,specially while driving.
@@rankytonky I didnt have a video sadly,but rule of thumb is that engines cant move to much.
Which brand motor mount did you end up getting?
Oem
Nice, how does the car feel after this job?
Its smoother ride,vibration is almost non existtant, and does its job absorbing vibrations
@@FlipSideGaragequestion is it 5 motor mounts that need to be bought for this including upper and lower transmission mounts
@@abrahamlopez1388 theres only 4
@@FlipSideGarage but one of the 4 is a transmission mount? I’ve been watching as many videos as I can this is going to be expensive since I’m going O.E.M but I’m seeing a upper engine mount,lower engine mount ,one side mount,and an upper transmission mount and lower
@@abrahamlopez1388 yea one upper trans.