How To Setup Your At Home Dental Unit || One Mission DMD

Поділитися
Вставка
  • Опубліковано 3 жов 2024

КОМЕНТАРІ • 19

  • @darshvinderpawa1859
    @darshvinderpawa1859 2 роки тому +3

    Thanks a lot for putting so much effort into making these video's. These are really helpful. I have emailed you my question. I will really appreciate your reply.

    • @onemissiondmd
      @onemissiondmd  2 роки тому

      Thank you so much! I'll make sure to respond to you as soon as I can!

  • @josevelaz9385
    @josevelaz9385 6 місяців тому +1

    Thank you very much for this excellent material. Could you clarify some doubts?
    a. What is the minimum pressure (PSI) that the portable dental unit requires to operate?
    b. When you are using the unit, let's say for about 30 minutes, could you tell me approximately how many times the compressor turns on and how many seconds it lasts on each time it turns on?
    Thank you very much if you can answer these questions. Greetings and blessings!

    • @onemissiondmd
      @onemissiondmd  13 днів тому

      Anytime it would go to the red mark for the psi I would release the pressure I can't remember which number it was at. It constantly turns on and off as the more you press the hand piece step, the pressure goes up and down up and down.

  • @yazosoyo
    @yazosoyo 2 роки тому +3

    What type of typodont are you using? Also, do you feel it's necessary to use water on typodont teeth?

    • @onemissiondmd
      @onemissiondmd  2 роки тому

      Thanks for your question! It's the acadental typodont!

  • @raiaf.3130
    @raiaf.3130 2 роки тому +3

    Hey most of the things u put are not available can u give me alternatives would help alott

    • @onemissiondmd
      @onemissiondmd  2 роки тому +1

      Hi, Yes I'm aware that a lot of things update since the last time I posted all the links regarding Amazon and eBay. You can simply Google search them, eBay search them or Amazon search them and everything will be fine. As long as you make sure that you are buying either a two-hole-hand piece with the two whole unit or a four-hole handpiece with a four hole unit.

  • @arhamkc
    @arhamkc 2 місяці тому

    Did u release the air from the bottom of the compressor after using it evrytime? Read it somewhere thats it’s important to release it but it also releases some greese and liquid.

    • @onemissiondmd
      @onemissiondmd  27 днів тому

      Yes absolutely! Made sure there was never air inside when I turned it off and was not using it

  • @shailishah2373
    @shailishah2373 Місяць тому

    My air conpressor of portable dentL unit is not holding air so RPM of handpieces reduces too. Any help?

    • @onemissiondmd
      @onemissiondmd  26 днів тому

      Double check your piping/tubing to ensure there is no escape of air and that there is a good seal! Hope this helps

  • @raiaf.3130
    @raiaf.3130 2 роки тому +1

    The prices are like sky high rn 😅

  • @MarthaYong
    @MarthaYong Рік тому +1

    Hi, help me, what code is your compressor california?

    • @onemissiondmd
      @onemissiondmd  Рік тому

      Hello, what do you mean by code? I have the California tools brand compressor

  • @craigsimonson4015
    @craigsimonson4015 2 роки тому

    Hello! I would like to mirror your setup, but cannot find anything close to your dental unit on Amazon. Any recommendations where or how else to find something comparable?

    • @onemissiondmd
      @onemissiondmd  2 роки тому +2

      Hi thank you for your question! So I actually bought mine when it used to be on Amazon but it is not there anymore. That's why I posted this eBay link that is selling it there, the link is in the description but I'll post it here too. It's the same one that I purchased!
      www.ebay.com/itm/184560993336?hash=item2af8b14438:g:~hMAAOSwBdBfI5e7

  • @odeyemikolade8816
    @odeyemikolade8816 Місяць тому +1

    The video wasn't very helpful because you show more of your face than the actual guidance.

    • @onemissiondmd
      @onemissiondmd  28 днів тому

      @@odeyemikolade8816 lol sorry about that, I made a follow up video with an update with step by step instructions how to set it up. Hopefully you see that video too