The Market Garage elevator on the Church Avenue site has been down for a few weeks. Officials said the elevator vendor has been troubleshooting during this time and found several issues. The most recent issue is a hydraulic oil leak due to the deterioration of the packing, PARK Roanoke shared. New packing has been ordered and should be delivered and installed mid to late week of June 12.
The single elevator at Church Avenue Garage has had intermittent issues for a week, and the elevator vendor again through troubleshooting has discovered the selector tape which informs the elevator when to start and stop needs to be replaced.
I'm glad elevator number 1 still runs very well. I think the guide rails are too close to or touching the doors on every floor for lift 2 at Luck Avenue
This is quite odd. It could even be something with the guide rails or maybe it's hitting something in the shaft. But as you said, it's probably a door clutch issue. I think the door clutch might be misaligned and it's colliding with the door rollers. It's kind of hard to tell, but this is what I think the issue could be.
weird how the clutch hits its rollers but does not break the safety chain. i sure hope its not running with a bridge on its shaft doors that would be super dangerous
It seems to me that this elevator is hitting multiple things in the shaft. The left C3 elevator at the Gaylord opryland did that same thing to me in 2014 right after it got modded by Thyssenkrupp
@@GaryBeltz The door restrictor keeps people from inside the elevator from opening the door. If the elevator is not within 18 inches of the floor, the restrictor keeps the door from opening so people couldn't fall down the shaft.
The Market Garage elevator on the Church Avenue site has been down for a few weeks. Officials said the elevator vendor has been troubleshooting during this time and found several issues. The most recent issue is a hydraulic oil leak due to the deterioration of the packing, PARK Roanoke shared. New packing has been ordered and should be delivered and installed mid to late week of June 12.
Sounds like the clutch is hitting the door rollers on every floor causing that sound to be made.
The single elevator at Church Avenue Garage has had intermittent issues for a week, and the elevator vendor again through troubleshooting has discovered the selector tape which informs the elevator when to start and stop needs to be replaced.
Reminds me of the "Talking" the ones at the Worcester Galleria Garage used to do (before their removal), especially "Red #1", with the 2-speed door.
6:24 that is wierd every time we get to a floor we hear a really loud clang
It always seems the back elevator has the most problems
Looks like the elevator has been possessed, sounds like a ghost Knocks on the elevator every time the elevator passes each floor. lol
The interlock bangs. Bang bang, bang bang, bang bang, bang bang, bang bang 2 times on every floor going up & down.
The moment I first heard that, I knew that was obviously an issue with the door clutch. Very graceful! ✔
Yep
I'm glad elevator number 1 still runs very well. I think the guide rails are too close to or touching the doors on every floor for lift 2 at Luck Avenue
Could be a interlock on the cab hitting the floors as you go up and down maybe easy fix or could be a complete modernization
had a 700A do that to me.
The clutch is banging on every interlock.
That’s odd. I have never seen this elevator act this way before
It's like Bloomingdale's parking deck at Roosevelt Field ALL OVER AGAIN! That and maybe Filechia's Bathroom...
I remember those videos of you getting stuck in this elevator years ago.
This is quite odd. It could even be something with the guide rails or maybe it's hitting something in the shaft. But as you said, it's probably a door clutch issue. I think the door clutch might be misaligned and it's colliding with the door rollers. It's kind of hard to tell, but this is what I think the issue could be.
Completely agree with you
hi
It’s the one in the cab not the shaft
I wish they would fix the bells.
0:27 AWESOME MUSTANG!! I love Mustangs!! I drive one 😁😁
Me too. Thats my favorite car and color. Thats my dream car!!
Gee, the door clutch noise the 2nd elevator makes reminds me of my own elevator where I currently reside... (tip: it sucks)
Why is it acting strange
I did ride this elevator before in 2019
i'm gonna guess its the interlocks for the inner doors hitting the latch of the outer doors as it goes past. didn't elmwood have a similar issue once?
U did scratch once and i know it :3
7:31 when you wake up at 4 in the morning and there's that one woodpecker outside your window
lol
I record elevators too
Me too
Me too
Me too. Well I will soon and I used too. I think you know why I'm not currently doing it.
@@EverydayEverything360 Oh
2:28 “It’s a HIGHdraulic!”
I think you're fooling us again with the voice controlled elevator bit.
Kones are my favorite
weird how the clutch hits its rollers but does not break the safety chain. i sure hope its not running with a bridge on its shaft doors that would be super dangerous
It seems to me that this elevator is hitting multiple things in the shaft. The left C3 elevator at the Gaylord opryland did that same thing to me in 2014 right after it got modded by Thyssenkrupp
We all know and love the famous Market Parking garage elevator! Well, I wonder what is going on with the elevators here
Nice elevators love it!
I really want to ride this elevator someday
A happy Summerween Special by DieselDucy!
Love the videos
Sounds like something with the Clutch
Sounds like the door restrictor is facing out a bit
What is the door restrictor?
@@GaryBeltz The door restrictor keeps people from inside the elevator from opening the door. If the elevator is not within 18 inches of the floor, the restrictor keeps the door from opening so people couldn't fall down the shaft.
I’m subscribed and an elevator fan
Has to do with the Limit Switch hitter
Will they ever mod these elevators?
Good ol Dover Impulse!
To me, it sounded worse when it went down and the 2nd time they went up
The door clutches are having bonding time with the shaft noises on elevator b
They are
@@DieselDucy Switch it to independent service and all you hear is the banging noises. (The Dover buzz becomes silent on independent service.)
I love that elevater
It was 11 years ago 2009-2020
Can't it cause the elevator to get stuck? Or would somebody just be able to push it closed? How would something like that develop?
Sounds like a car crossing a train track or something
It almost seemed to be that there was something on the elevator that was hitting the outer doors
Love the b motor
It is nice
When I was doing that double bang wasn't like death trap
What do you think is wrong?
Sounds like the clutch is hitting the door rollers causing that sound to be made every time the elevator reaches a floor.
It sounds like a door issue
Door clutch.
Is it the interlock?
Door clutch.
Might it wind up tripping an interlock?
How are you doing during The Coronavirus Pandemic
What time was it when you were there
What's that banging noise on the other elevator?
I think it's the clutch.
Man the elevators need to be fixed
They are rinning good today.
Door clutch or inner lock
yep
Those both need repairs they both need the bells fixed and door repairs add floor indicators
the indicator is doing well now.
There is a Roblox game that replicates this parking garage!
It's banging
Filechia's bathroom 2.0
3:17 it just needs full intelligent leveling
It does.
0:54 spooky
yep!
6ty floor the weather floor
Ur night owls
Woah! Someone is angry today!! 😮😮
BraydonSlayz43 who?!
@@josecontreras8468 This elevator!
I think these elevators could stand to be fully modernized.
they are running well for now.
Mmniljn