Pro Grade 1x30? Knife Sharpener Blade Grinder Toolcker Belt Tool Review
Вставка
- Опубліковано 28 лип 2023
- 1x30 Toolcker Sanding Tool T-King Professional Grade Knife Belt Grinder Sander Sharpener Rubber Contact Wheel Flat Platten Slack Belt 550 Watt Sewing Machine Motor Horizontal Verticle Extreme Quality Sharpener Knife Grinder Belt Tool Tensioner Drive Wheel Pulley Razor Edge Sharpening System
1x30 Toolcker Sanding Tool T-King Professional Grade Knife Belt Grinder Sander Sharpener Rubber Contact Wheel Flat Platten Slack Belt 550 Watt Sewing Machine Motor Horizontal Verticle Extreme Quality Sharpener Knife Grinder Belt Tool Tensioner Drive Wheel Pulley Razor Edge Sharpening System
1x30 Toolcker Sanding Tool T-King Professional Grade Knife Belt Grinder Sander Sharpener Rubber Contact Wheel Flat Platten Slack Belt 550 Watt Sewing Machine Motor Horizontal Verticle Extreme Quality Sharpener Knife Grinder Belt Tool Tensioner Drive Wheel Pulley Razor Edge Sharpening System - Розваги
This video was so helpful to get it all set up. The included brochure is a waste of paper. Thank you for doing this.
Your very welcome. Thank you for the feedback.
I use one on my small blade for my gloves. I hollowgrind on it and it works like a dream👌🏻
Awesome, thank you for the feedback.
I bought this machine five yrs ago , i think they were under 200 when they first came out, i cant exactly remember but from memory they were copied from a manufacturer from middle east, i used them to hollow grind butchering knives, they work but pretty slow, the tracking is also a bit flimsy especially when using cheap belts, they are pretty handy to use for sharpening and small projects
Thank you for your input.
I have the exact same on, I love it. For the price, its awesome. Very stable, much more so then other brands i have tried.m Big difference.
Thats great, thank you for leaving feedback.
Honestly 4 inch is to small for hollow grind, maybe for final bevel ok, or if its a small knife, however I must say this looks like a nice grinder, very small footprint, could be good for mobile sharpening service.
Thank you for the input, I may grab a 2nd unit for sharpening with them. Run a coarse and fine grit belt.
Do you think this would be a decent starting grinder for stock removal I'm trying to get started in the craft and don't want to shell out a grand for a 2x72 I would use it mostly for bevels thanx.
I have a video I did on a Multitool brand 2x48 grinder. It works great for stock removal. I believe its 1hp. The 2 inch belt is much easier to shape the bevel then a 1 inch belt. Im not saying it cant be done with the 1x30, its just going to take more time effort, belts and skill. My bevels I have done were much easier on the 2 inch belt for side to side evenness. The company that makes this chinese 1x30 grinder puts out a bigger grinder with a 2 inch wide belt. Grizzly has a 2x42 that I picked up a few months back. I have not had time to review it. I hear the Grizzly 2x42 has a weak motor so I may use it to sharpen until I can get a bigger motor. My recommendation would be a multitool 2x48 or equal grinder at minimum with 1hp motor for stock removal. I get no kick back from Multitool although they did send me a grinder to review. My first choice would be Ameribrade 2x72 or 2x48. I havent had the money to get an Ameribrade yet. There is also a machine that is similar to a Tormek that allows belts to work with the machine. It is variable speed and reversable with a guide rod for sharpening that looks like a nice tool to have.
@@WardogOutdoors Thanks. And I have seen the grizzly 2x42 and the motor isn't what has me bothered by it because I believe I would be going slow and taking my time being new and all, however the stuff I've seen about the platen is what has me worried I'm just getting going and I don't want to have to upgrade a tool before I use it. But am about to watch your other video thanx for pointing me in a good direction I really appreciate it. Earned a sub bro.
Thank you for subscribing. Your welcome and good luck to you. Im not a pro but I have ground a few blades. There are people who makes knives on 1x30 grinders so it is possible with this grinder. If it dont do what you want at least you could use it to sharpen, scotch brite belts for polishing and leather belt for quick strop.
what is the point of that allen head screw when going from the different tool heads? it isnt big enough to actually keep it from slipping through. it seems tightening the handle locks the spindle in place. what is the bolt for??
It's to hold the work table in place. If not using the work table you don't need them the black screw wrench holds the tooling arm in
Thank you for the explanation.
Does it have a sealed motor for dust? Just asking because my 2 x 72 as a sealed motor
The VFD is not sealed, I dont believe the motor is sealed but not sure. My guess would be not sealed.
Been looking for a 1x30 after someone stole my last one. Was thinking i would buy another cheap harbor freight like i had then do all the upgrades. But im thinking this may be the way to go... Appreciate the video.
Sorry to hear your 1x30 was stolen. This is a great option much more advanced then most 1x30s. Thank you for letting me know you appreciate the content. Good luck to you.
@@WardogOutdoorsI don't remember what model the one you showed was..?
This is a Toolcker 550 watt small belt machine ordered from T-King on Amazon. There are other sellers as well. I had no issues ordering from T-King, it was delivered a few weeks early from estimated date.
@@WardogOutdoors Appreciate the help
Your very welcome, thank you for commenting.
how it compairs to the Grizzli 2x42 ??
My Grizzly 2x42 is still in the box. Havent had time to review the Grizzly yet.
If you had to pick between the Kalamazoo and the toolcker which would you choose
The 1x42 is nice because the belt is longer so it stays cooler longer, but the speed is not variable. The Toolcker is variable speed, adjustable flat platten to different angles, 4" rubber contact wheel. Each has its perks.
Good question 👍🏻
@gregmccormack5709 I agree!
I have my Kalamazoo 1x42 set up for high speed leather stropping right now. It works amazing for ripping away burr/ wire edge. The 1x42 also works great with surface conditioning belts to resurface the sides of knives and shaping knife handles.
The Toolcker I am using as a high speed sharpener.
What is it called on the Amazon site as I cannot find it thanks
T-King 550watt small belt machine.
Thank you.
Your welcome!
Jesus what is up with the description? Reads like an temu product listing that was translated from Chinese to English thru Google translate.
Interesting.
What's the price on it looks nice
Around $400.00 after shipping from tking on amazon.
Hello, how do I change the toolcker address?
Thank you!
Why do you want to change it?
@@WardogOutdoors Simply because if I use a scotch band, not to do it against the edge and to be able to do it more comfortably.
If you are talking about being reversable, yes there is a button to push to change direction. Only change while belt is stopped.