How-To: Re-screening a fiberglass window screen.
Вставка
- Опубліковано 13 вер 2015
- In this video Rick demonstrates how to re-screen with fiberglass mesh using our screen table kit, along with our screen table jig set.
To see our full line of BackRoom Window And Screen Repair parts, follow this link. www.primeline.net/product-cat... - Навчання та стиль
OK... I was sold and bought this set. This is what I found. First off, I'm making 34"x451/4" and 27 3/4"x45 1/4" frames with mitered corners. I made 4 screens and everyone of them looks like a potato chip. I didn't overstretch the fabric, just pulled it up off the table like the video says. Other major concern, there is no provision for the spring clips. I notice in the video, there are no spring clips on that frame. I tried squeezing the clips inside the jig and was working ok until I took the screen out of the jig, they snap up so fast that the both broke! Being that it was mitered corners, I was able to slide replacements into the corners. On the last screen, I left the corners off the screen and installed the screen, once again, it looked like a potato chip. I have to say, the jig does make the process go faster, but if I was using the plastic corner to connect the joints, I wouldn't be able to add the spring clips after assembly.