Products that we use and recommend: ► Front Door Lock Actuator Driver: amzn.to/4flPVry ► Front Door Lock Actuator Passenger: amzn.to/3YI6kQf ► Torx Set: amzn.to/3xlCkfT ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Mobil 1 Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► Voltmeter: amzn.to/4hB6Zvk ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
this job can be completed in 20 min , you do not need to pull the door window switch .. you do not need to take out the window regulator , you also do not need to take out the exterior door handle ... you will need to pop the wire harness mount and rest door panel on the side roll window up and slide actuator out behind the window regulator
Detailed video. It is possible to remove the door actuator without taking out the outside handle assembly. Meaning, that you have to disconnect only the white cable shown at around 18:41, while the actuator is still inside the door. Additionally, the vertical beam you removed at around 14:00 can be left on. If you flip the actuator while inside the door, it is still possible to pass it from behind this vertical beam.
It's actually possible to replace the actuator without removing the door handle, without removing the window regulator...only pain in the as* is the cable holders of the lock actuator itsef...it took me about an hour to replace...i didn't even disconnect anything of the doorpanel,i just left it hanging on the ground
Thanks for the video y’all! I’ll be taking apart my door this weekend. A lot more complicated than my old Chevy Tahoe sadly, but now I’ve got an awesome reference point!
Strange you don’t show how to disconnect the window from the regulator, but it helped me as I just rotated the inner door handle assembly and the door latch as one out through the door without removing the regulator. Thanks for the video-it helped a lot!
A QUICK WAY TO BYPASS ALL OF THAT IS TO USE THE KEY. Open up your fab and take the key out and open the door manually. Only for driver side door though.
If I replace my driver front door that has the Technology package /comfort , with used a one. Do I also have to swap out out lock actuator and the key hole slot?
Thank you for this detailed video! My F30 lock on the same side but RHD just stopped working. Just bought the parts and tools. Will try when the weather is good. I have another problem of the drivers window going all the way to the top and then it come down a few inches. Can you show what we can do please?
Products that we use and recommend:
► Front Door Lock Actuator Driver: amzn.to/4flPVry
► Front Door Lock Actuator Passenger: amzn.to/3YI6kQf
► Torx Set: amzn.to/3xlCkfT
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Mobil 1 Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► Voltmeter: amzn.to/4hB6Zvk
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
this job can be completed in 20 min , you do not need to pull the door window switch .. you do not need to take out the window regulator , you also do not need to take out the exterior door handle ...
you will need to pop the wire harness mount and rest door panel on the side
roll window up and slide actuator out behind the window regulator
Exactly 😂
Detailed video. It is possible to remove the door actuator without taking out the outside handle assembly. Meaning, that you have to disconnect only the white cable shown at around 18:41, while the actuator is still inside the door. Additionally, the vertical beam you removed at around 14:00 can be left on. If you flip the actuator while inside the door, it is still possible to pass it from behind this vertical beam.
You can leave the black beam in the door?
It's actually possible to replace the actuator without removing the door handle, without removing the window regulator...only pain in the as* is the cable holders of the lock actuator itsef...it took me about an hour to replace...i didn't even disconnect anything of the doorpanel,i just left it hanging on the ground
Can you help me with it
@@plamenpeykov709 bring it in 😀
@@Musti1986where are you located
@@seanwoodson1143 belgium
How did you get the actuator out of the door ?
8 years later and this video is still saving people! I have an F30 and the mechanism is the same. Thank you for the ball point pen trick!
Why would you not show us how to put the lock part back on
Because they couldn't
Thanks for the video y’all! I’ll be taking apart my door this weekend. A lot more complicated than my old Chevy Tahoe sadly, but now I’ve got an awesome reference point!
Strange you don’t show how to disconnect the window from the regulator, but it helped me as I just rotated the inner door handle assembly and the door latch as one out through the door without removing the regulator. Thanks for the video-it helped a lot!
Was going to ask if that could be done removing the lock actuator without removing the window regulator and motor
Is there any way to find out if mine part if 4 od 7 pins without taking it out?
After part replacement is there need to install it on bimmer tools?
Do u have link where you can buy dose door lights.
Hello! Ty a lot but where is the link for the clips?
A QUICK WAY TO BYPASS ALL OF THAT IS TO USE THE KEY. Open up your fab and take the key out and open the door manually. Only for driver side door though.
Hy guys ! Thx for the video, but whe don’t need quick the window up/down and dont remove the windows remote
If I replace my driver front door that has the Technology package /comfort , with used a one. Do I also have to swap out out lock actuator and the key hole slot?
Thank you for this detailed video! My F30 lock on the same side but RHD just stopped working. Just bought the parts and tools. Will try when the weather is good.
I have another problem of the drivers window going all the way to the top and then it come down a few inches. Can you show what we can do please?
I have a similar issue how did you solve it ?
You need reset anti trap function
The window magical dissappear
The window regulator is quite hard to remove… can you show more detail please?
I have to do this job in the morning. How much am I charging for labor here 😂😂😂
No you made it a lot harder then it has to be you can literally pull it out without the window regulator and the outer door handle
Is that the bulgarian flag on the wall