Thanks homie this ones only a front hop but there’s also a kit with both front and back, might be something to review in the future, thanks for the feedback homie💯
In 94-95 I use to put 4 motors in mine when I use to build those...I use to buy from the company their defect rims and parts in bulk...I would build 5 or six cars an sell them for 45$.
I used to do this with a paper clip, that motor was in electric lollipops, we would run the paper clip through a straw and glue everything down. Lol same thing. Just touched a AA battery to make it hop
Got a few questions?! Can you run the string to both axles so both ends go up and down at about the same time? What is the lowest voltage you can run this on? I’m looking for more of an airbag effect on a curbside vs a hopper. Is it possible to put a small 3 way toggle or momentary switch on there to also make it look like it’s getting aired up or down? Can I replace the U-Bar with straight stock or would I be better off trimming and rebending it instead of I wanted to keep the full lift height lower?
If you look @ the chassis, it has holes for the strings throughout it for different positioning including the back (driver rear). If not, can always drill in, or melt in your own holes (if u don't have a drill small enough). What I have done before if I couldn't fit the motors in the trunk depending on the size of motors. I would cut out the back seat, leave the front seats in. After installing the motors I would see what parts of the back seat I would be able to build back in with motors in place. Or you can always tint/black out the rear window. ✊
If you buy this kit there is instructions on how to place the motor in the back to use with a interior, although this will only work with a single motor but you might be able to get away with putting another one under the dash or behind the firewall
Okay so the string that you havw is either too long or your battery is to weak, make sure the string has very little slack and make sure your using a powerful enough battery
Mine was the same way sometimes the string 🧵 gets tangled up.. mostly when it hops one and then nothing else.its because it is not enough weight to bring it back down... People mostly use fishing weights to add a few ounces to the chassis.
This takes me waaayyy back to 96. I haven't one of those in years.
This might sound weird but I found this so satisfying, really nice review/tutorial! I salute you G 💯
Thanks I’m glad you liked it💯
Fasho no problem!
I use to do them with fish string and the same lil motor with a clothes hanger I just love the video brought back memories when I was a kid
Hell ya that's clean tutorial was pretty good too might have to get one now..Thanks for sharing homie
Thanks for the feedback homie I appreciate it💯🙏🏽
Fire videos homie💯🔥
Thanks homie 💯
Shoot I used to use Bobby pins when I used to build them enjoyed the video champ
Good times. Thanks for the comment💯
@@lowlowsandclothes9923 your good g blessings boss
Whaaa...Doper than Dope..Lock the rear up n hop it haha..Easy explained tutorial..Thanx HomeBoy
Thanks homie this ones only a front hop but there’s also a kit with both front and back, might be something to review in the future, thanks for the feedback homie💯
In 94-95 I use to put 4 motors in mine when I use to build those...I use to buy from the company their defect rims and parts in bulk...I would build 5 or six cars an sell them for 45$.
Nice haha
Yessirr🔥🔥🔥🔥
💯💯💪🏽
can you make a video on how you set up the wire to the battery and the switch box?
The kit should come with instructions
Please make a video 🙏🏽🙏🏽
🔥🔥🔥🔥
Thanks homie 💯
Can you post on how you did the battery
I just order from you place hopefully it come early
I got in in 3 days so you should expect fast shipping
@@lowlowsandclothes9923 my bad for not text back i got mine in a week because i got a lot of stuff
Dope I think mine came in like 3 days because I’m in cali
I used to do this with a paper clip, that motor was in electric lollipops, we would run the paper clip through a straw and glue everything down. Lol same thing. Just touched a AA battery to make it hop
Got a few questions?!
Can you run the string to both axles so both ends go up and down at about the same time?
What is the lowest voltage you can run this on?
I’m looking for more of an airbag effect on a curbside vs a hopper.
Is it possible to put a small 3 way toggle or momentary switch on there to also make it look like it’s getting aired up or down?
Can I replace the U-Bar with straight stock or would I be better off trimming and rebending it instead of I wanted to keep the full lift height lower?
can you do a review on the the 3 wheel kit by hoppin hydros
Review should come soon in the future
Ay I’m a starter to dis stuff so can u tell me how you put the car on the base
It has Velcro on the sifes
Can you put the motor in the back so you can put the interior in?
Yes actually, if you model had a interior bucket you can do that it is better explained in the instructions
If you look @ the chassis, it has holes for the strings throughout it for different positioning including the back (driver rear). If not, can always drill in, or melt in your own holes (if u don't have a drill small enough). What I have done before if I couldn't fit the motors in the trunk depending on the size of motors. I would cut out the back seat, leave the front seats in. After installing the motors I would see what parts of the back seat I would be able to build back in with motors in place. Or you can always tint/black out the rear window. ✊
If you buy this kit there is instructions on how to place the motor in the back to use with a interior, although this will only work with a single motor but you might be able to get away with putting another one under the dash or behind the firewall
Are those plus tax?
How do u make it keep hoppin my gets stuck when I press the button
Could be a few things, either not enough power, or the string is too long and needs to be shorter
What is slack I'm new in the hoppers scene so ye can someone pls explain
It’s the amount of extra line or how loose it is
@@lowlowsandclothes9923 so if there's more line what is the difference?
@@lowlowsandclothes9923 if there is extra line does it hop less more?
@@albertojimenez1539 if you have extra sometimes it wont go down and it’ll stay locked up
@@lowlowsandclothes9923 oh ok thanks
Why won’t mine hop it just moves up?
Okay so the string that you havw is either too long or your battery is to weak, make sure the string has very little slack and make sure your using a powerful enough battery
@@lowlowsandclothes9923 ok thank you 😊
Can you put it on any car model.
Should fit under most models, mainly for impalas, g body’s, caddy’s and other big body cars
If i get w front and back kit from hoppin hydros, can i still install the kit AND keep the interior? Or does the interior have to go?
Hmmm you might be able to fit the motor under the dash and one in the trunk
@@lowlowsandclothes9923 can i put both in the trunk?
Probably youll just need some extra drill bits and a big body
@@lowlowsandclothes9923 yeah im do a 6-4 probably
I’m so confused how u wired the switch box
The kit comes with a wiring diagram
How do u get three wires I only get 2
You cut one side to add the button, it should be in your instructions
@@lowlowsandclothes9923 dam I threw mine away but I got some coming this week I will let u know if I need help okay
@@bryanmartinez-ou9cy dm me at los_traviesos_sac if you need help
How much is it for kit 65 Chevy Impala
It’s a universal fit, it fits under most late model cars. This single hop kit runs at $16.75 link in the description below if your interested
Where can you buy it is there a website or a place?
Link is in the description below
Can u put it on a monte carlo ss??
Yes!
Mine lifts but doesn’t hop any ideas
Either 2 things, your string is too long or not enough power
I have the same problem
@@lowlowsandclothes9923yea I need help
Where can I buy this?
Link should be in the description
What scale are the wheels?
1:25
How much was it in total plus shipping and tax
Just bought 1 other day the front and back hop 32$ total with shipping took 2days to get g
I need help with mine won’t hop it will hop once then stop
Mine was the same way sometimes the string 🧵 gets tangled up.. mostly when it hops one and then nothing else.its because it is not enough weight to bring it back down... People mostly use fishing weights to add a few ounces to the chassis.
@@syxxpoppin8830 okay thanks I got it fixing now I plan on building more
@@syxxpoppin8830u ever figured it out fam im having same prob
What kinda battery you got?
I’m using a rechargeable battery from a rc car, a small blue 7.4 volt battery. You can also use a 6 volt lead acid
@@lowlowsandclothes9923 alright thanks
Shii i got the same one and i out it on a regal but i added 2 more mottors on it
Dope homie!
@@lowlowsandclothes9923 u can get the motors off stereos
What’s your Instagram I need help on wiring the switch box
@los_traviesos_sac
@@lowlowsandclothes9923 I just messaged you on ig my ig is kingstonscustomdiecast
@@Randomuser23214u ever get help bro?
. Did u ever figure out g i need help man
Im about to do a car.
🔥🔥🔥🔥