Hello friend good day, sorry I have a g shock 6500 watch and the word error flashes on the screen, I already replaced batteries and still does that, does it have repair? It's a great channel, regards
You'll first need to perform AC after battery switch to reset the circuit board. If that didn't work, check the connection on the sensor side. Follow the steps I showed and try to check if the sensor is still there or if the wire cable still intact. Sometimes they crack/torn apart.
@@gshockhighfashion thanks Hello friend, I already did the reset after putting new batteries, I already checked the connection and it seems that everything is in optimal condition however the intermittent error message on the screen is not removed, I do not know what to do
Hi really good videos. I have a PRT40 but one of the back screws is not fasten. How I can fix it. Some solution on web is use a JB époxic or a glue with baking soda. I do not want damage the watch. Could you give and advice. Also how the sensor can be remove from the main body case? Thank you
*** BOOK WARNING *** The bezel was already broken on the sensor when ur started so I couldn't see how it was placed on the casing. I'm currently max bidded @ $150 for one of these that is all orginal. Now I know theres a good chance the bezel is prob already at best very fragile at worst already cracked. I've pulled a few of these vintage ones to know my best best at getting things off to clean(It's my thing to clean them up and wear them)is to remove EVERYTHING from the casing and just slip it off. Is there anything that will prevent that bezel from coming off attached to that sensor?
The bezel aren't attached to the sensor. There's a perforated metal plate screwed to the hardcase to cover the sensor. You'll need to brush clean all/any oily residue with soap first. Then remove the strap and 4 bezel's side screws. Then disassemble the movement/engine/module out of the hard case. Then remove all 4 side buttons by taken out the e-clip. After all that, now you can try to remove the bezel upwards and pray it didn't break during the entire process. In my case, I didn't really care if it breaks since I could just buy a replacement bezel and swap them out. Not original replacement part of course.
Looks a lot better on the inside then it did on the outside 🤔👍 Looks like another good rebuild (did you just have a spare bezel hanging around?) Great work & vid, cheers 🍻
Exactly, I'm impressed with all the tiny parts that made the interior. Looks really premium for the price. Yes, I found an aftermarket bezel for this watch and that completes the whole rebuild works! 😃🙌
I remember when one of my friends got one in the 90's I wanted one SOOO BAD
They're pretty affordable to get today. Will all the features it has, it is still a good deal.
@@gshockhighfashion just bought one for 90 euros, it looks brand new lol
Hello friend good day, sorry I have a g shock 6500 watch and the word error flashes on the screen, I already replaced batteries and still does that, does it have repair? It's a great channel, regards
You'll first need to perform AC after battery switch to reset the circuit board.
If that didn't work, check the connection on the sensor side. Follow the steps I showed and try to check if the sensor is still there or if the wire cable still intact. Sometimes they crack/torn apart.
@@gshockhighfashion thanks
Hello friend, I already did the reset after putting new batteries, I already checked the connection and it seems that everything is in optimal condition however the intermittent error message on the screen is not removed, I do not know what to do
did you rebuild it ?
Hi really good videos. I have a PRT40 but one of the back screws is not fasten. How I can fix it. Some solution on web is use a JB époxic or a glue with baking soda. I do not want damage the watch. Could you give and advice. Also how the sensor can be remove from the main body case? Thank you
Hi got question, how to open the face plate, mine looks foggy, i want clean it. Thx
Please show how you assemble it. Thank you
Sad to see how a bezel crack like a cookie, pain much pain
Muy buen video..eres un artista!!
*** BOOK WARNING ***
The bezel was already broken on the sensor when ur started so I couldn't see how it was placed on the casing. I'm currently max bidded @ $150 for one of these that is all orginal.
Now I know theres a good chance the bezel is prob already at best very fragile at worst already cracked. I've pulled a few of these vintage ones to know my best best at getting things off to clean(It's my thing to clean them up and wear them)is to remove EVERYTHING from the casing and just slip it off. Is there anything that will prevent that bezel from coming off attached to that sensor?
The bezel aren't attached to the sensor.
There's a perforated metal plate screwed to the hardcase to cover the sensor.
You'll need to brush clean all/any oily residue with soap first. Then remove the strap and 4 bezel's side screws.
Then disassemble the movement/engine/module out of the hard case. Then remove all 4 side buttons by taken out the e-clip.
After all that, now you can try to remove the bezel upwards and pray it didn't break during the entire process.
In my case, I didn't really care if it breaks since I could just buy a replacement bezel and swap them out. Not original replacement part of course.
do you sell this type of sensor? i want to buy

Pls help. How can i put back the wire sensor.. i accidentally pulled it.
Hi Jay it is a way to remove the sensor?
please make your state of collection of 2018 video please
Increíble, felicitaciones
Thank you
Looks a lot better on the inside then it did on the outside 🤔👍
Looks like another good rebuild (did you just have a spare bezel hanging around?) Great work & vid, cheers 🍻
Exactly, I'm impressed with all the tiny parts that made the interior. Looks really premium for the price. Yes, I found an aftermarket bezel for this watch and that completes the whole rebuild works! 😃🙌
gshock highfashion Awesome & a Nice looking watch for your troubles 👍🍻
PS: have you sorted your quad sensor issue yet ?
@@gshockhighfashion where did you manage to find the bezel?
I'm deep deep need of a bezel for a lungman and a raysman...so hard to find 😔
plz make inside video of G-Shock GBA-800 squad dark green edition one .
Verygood vidio. I want see to insinde a gg 1000 and change battery it. Thank you.
Here you go:
ua-cam.com/video/ALzNMlY3ipQ/v-deo.html
gshock highfashion Thank you so much.
First one
Optimus prime
first like
Fifth one