Would like to see a comparison between this welder and the bobcat 260. In the market for a motor driven machine and having a hard time deciding which way to go
How well do the electrics work after being left out in the weather, if I get one of these it's living on a trailer or in the back of my truck year round through the snow and wind and heat
I have the exact same set up, however I have heavy black soot around the welds. I have checked every connection, the bottle holds pressure when closed. Any idea why?
I currently run a trailblazer for the 10,000 watts w/ plasma (Hypertherm 45amp) and air compressor and grinders; which did much better than bobcat. Will the 265 keep up at 9500 watts? Im usually running LN25 wirefeed too. Curiously shopping
The only thing I hate about them is when u have it in low idle all of a sudden the thing kicks into high idle and takes forever to go back down to low idle. It just sits there and screams all the time but that’s the only thing I hated about it. And the one we had was a 330 idk if the 260 does it or not but I’m pretty sure all the 330s do it correct me if I’m wrong on that.
Same happened to my 260 but it was the idle silinoed was like a 10 min fix at a local shop it’s just has to be adjusted a bit and should resolve the problem
Jesus crikey... we just had to pick up on of those spool guns cause our other magnums push-pull guns went down...We ended up spending like $5k CAD... in order to get one period from the only place we could find....
So I have the weldanpower 225 acdc from 1984 same engine Briggs stratton cast iron.......it shit the bed yesterday could you point me in the right direction? I give try to turn it over @ 1:00 ua-cam.com/video/zWFo__4APiQ/v-deo.html
Have ranger newer generation that I'm going to sell having these companies sell machines with intentional failure point Is joke both linclon n Kohler linclon there board problems n Kohler for unnecessary designs sucks being a moblie welder n having dumb issues with designs being the problem so far miller has been working out for me so I'm sticking to that now
Have ranger newer generation that I'm going to sell having these companies sell machines with intentional failure paint Is joke both linclon n Kohler linclon there board problems n Kohler for unnecessary designs suck being a moblie welder n having dumb issues with designs being the problem so far miller has been working out for me so I'm sticking to that now
Would like to see a comparison between this welder and the bobcat 260. In the market for a motor driven machine and having a hard time deciding which way to go
Sure we can help! Call or email us and we can send over some information on both!
Nice looking weld Sir.
Thanks for watching! Let us know if you have any questions.
How long can it be ran on full tank and will it last on heavy duty jobs
How well do the electrics work after being left out in the weather, if I get one of these it's living on a trailer or in the back of my truck year round through the snow and wind and heat
Thats what I want to know. I don't know anybody thats got one of these.
The spool gun is like 35% the price of the welder right now. Holy crap!
Well that spool gun work with the Lincoln 305
Cant wait to pick up this spool gun for my 330...could you do a video on the ln25x or maybe the active8x suitcases? Or did I miss that video?
Here is the link to the video we talk about the Activ8X. If you have more questions call or message us!
ua-cam.com/video/sph2MxYDAhQ/v-deo.html
@@BakersGas just bought one and the spool gun as well
@@sevanski1135 Awesome let us know how you like it!
I have exactly the same setup, but the gas won't stop coming. I have to close the valve gas every time this is normal o I have a problem with the gun?
I have the exact same set up, however I have heavy black soot around the welds. I have checked every connection, the bottle holds pressure when closed. Any idea why?
Hey can you do video to actually set up the spool wire? I'm running into some really issues and fighting to get it to feed.
Hello, sure next time we will show that part! We were trying to keep the video under 10 minutes.
Instablaster.
No pulse on the 260? But the 330 can pulse?
How long do you let it run before welding?
I currently run a trailblazer for the 10,000 watts w/ plasma (Hypertherm 45amp) and air compressor and grinders; which did much better than bobcat. Will the 265 keep up at 9500 watts? Im usually running LN25 wirefeed too. Curiously shopping
Is it worth the price I heard the air compressor on them is no good I have the 305 Lincoln
Does this work on vantage 300-400 welder?
Nice looking welder good replacement for the gxt 250
Yes this might be it for you! Let us know if you have any questions.
Can you hook up a spool gun to a 305g
The only thing I hate about them is when u have it in low idle all of a sudden the thing kicks into high idle and takes forever to go back down to low idle. It just sits there and screams all the time but that’s the only thing I hated about it. And the one we had was a 330 idk if the 260 does it or not but I’m pretty sure all the 330s do it correct me if I’m wrong on that.
Same happened to my 260 but it was the idle silinoed was like a 10 min fix at a local shop it’s just has to be adjusted a bit and should resolve the problem
What's the price on the machine now days? August 2022
I knkw the 260mpx is $2700 higher than it was 2 years ago. The 330 is about $9 grand
@@strayedarticle2838 I got onr earlier this year. Machine and 100ft of lead was 7300. Hurt my soul
Jesus crikey... we just had to pick up on of those spool guns cause our other magnums push-pull guns went down...We ended up spending like $5k CAD... in order to get one period from the only place we could find....
Can you arc gouge with the 260?
No
Nope you wouldn’t want to anyway not enough amps
@@lockeparsons9198 I ended up getting the 330mpx
Technically no actually yes u can set it to stick and run a smaller carbon u can’t uses a 3/16 but u can run a 5/32 carbon
I'm from Guatemala
Madaraobito from where and what is your comment?
So I have the weldanpower 225 acdc from 1984 same engine Briggs stratton cast iron.......it shit the bed yesterday could you point me in the right direction?
I give try to turn it over @ 1:00
ua-cam.com/video/zWFo__4APiQ/v-deo.html
Have ranger newer generation that I'm going to sell having these companies sell machines with intentional failure point Is joke both linclon n Kohler linclon there board problems n Kohler for unnecessary designs sucks being a moblie welder n having dumb issues with designs being the problem so far miller has been working out for me so I'm sticking to that now
Have ranger newer generation that I'm going to sell having these companies sell machines with intentional failure paint Is joke both linclon n Kohler linclon there board problems n Kohler for unnecessary designs suck being a moblie welder n having dumb issues with designs being the problem so far miller has been working out for me so I'm sticking to that now