I’m here because of Buckin’ Billy and my longtime interest in the mechanical aspect of internal combustion. I have a couple of saws that I use for firewood gathering. An old 261 is a bit tired, so I’m going to experiment changing it to a 272 as a backup saw to my 372XP 24” with Buckin’s file techniques done on the chain. Piñon fear it (I’m Nevada). Another hitchhiker story you might enjoy. A guy stops to pickup a hitchhiker. As they are riding along, the hitchhiker says, “Nice of you to stop. I guess you aren’t worried about the possibility of me being a serial killer.” The driver says, “What are the chances of two serial killers being in the same vehicle.” Thanks for sharing your expertise.
Harvey I hope your ready for where this channel is going. You subscriber count goes up everyday. I will tell you why. You are a good genuine person. You have faults and aren’t afraid to own them, and we love you for it. Great story, I wonder what that hippy is doing now. Really looking forward to the saw builds. It is truly with love that I tell you have a great day and please give my best to you family.
Harvey love ur stories , reminds me of my best friends father , he was a very good man ,a large man, always had a good story to tell . he loved play tricks on people and was funny as heck! keep the stories coming ! good info on the saw builds !
Man oh man I'm glad you made it to hospital & that doc fixed you up, this is one hell of a video & a hell of a story I've not laughed so much in ages & it's the way you talk & behave on camera I feel I'm sitting in the same room as you! Love it all, the saws, the knowledge, the character & the stories. This is great stuff 😬❤️👍
Mikey!! Always a pleasure to here from you! So glad yer here! I love reading yer comments! Wish I could give you another thumbs up! It lets me do only one take care mY friend from scotland!!
Glad you got taken care of Sir! Mikey Yoyo told me about your channel. I'd heard Buckin mention ya, but didn't realize you did videos as well! I'd love to see video of you working on these saws! I'm a mechanical guy, so I appreciate, not only running saws but enjoy watching and learning the mechanics of saws and upgrades.
I use the same pistons. They work well and you won't burn them up either. There is timing on the intake skirt. If you stay around 0.030 you will be ok. If you remove the cylinder base gasket that's 0.020, so only take 0.010 off the skirt. If you go over then ya gotta use a degree wheel to time it. Great videos, I like this shit!
Hey Harvey I love you videos I have an old Husqvarna 61 with a 24 inch bar I'm just a homeowner wood cutter for my wood stoves but boy that saw sure has cut a lot of wood and has never given me a moment's problem.
Harvey I'm new to your videos so far I'm hooked , I'm a buckin fan and I'm impressed with your work and outlook at life hopefully we can do business soon 👍👍 love how you share your lifetime of knowledge and skills of building saws ✌
I dont mean to be off topic but does someone know of a tool to get back into an instagram account? I somehow forgot my account password. I would love any tricks you can give me.
@Luciano Omar thanks so much for your reply. I got to the site thru google and Im trying it out atm. Looks like it's gonna take quite some time so I will reply here later with my results.
That was a great story!! Love it! Thanks for sharing!! Would live to see that saw build also. I have a saw i gotta fix. Something to learn on. Ms260. Needs a new top end. Should be able to figure it out. If not im no worse off than i am now cause it doesnt run. Ive got $30 into it so far so a little more wont hurt. Anyway, STAY SAFE!!
New subscriber from NE Ct and coming from Buckin. Enjoy your stories and knowledge on saws. I am lucky to be the only one permitted to cut on a 400 acre 18th century farm so I am always trying to keep up with the deadwood. Between you, Buckin Billy Ray and Mike Morgan, I truelly love to hear about the woods. Keep it going and thanks. PS: Great story, keep them coming!!!
I met u thru Billys channel, asked him bout a saw, he said hit up Ebay, I said NO! I wanna met U, now... yur my New idol! u rock Harv!!! ur old school, like me!! ^5s bro ^5
Nice I hope to be riding dirtbikes this weekend to, I haven't been out this year at all. I just picked up another 81 pe 250 that's running real rich for some reason. And have to get the forks re-sealed on my 14' 450 Honda. I actually need to do work on all my bikes, But that's the two bikes I want to run this weekend. when a guy owns to much crap its hard to maintain it all. I'm sure you know what that's all about. Alot of people seem to talk crap about wiesco pistons, but that is all I run in my bikes and have never had an issue. Snowmobiles on the other hand well that is a different story. Haha great story I bet that fella never ever forgot his ride with you two crazy loggers!
@@theironhorse6600 yea a tall seat and wide bars. there nice bikes to ride. Hopefully I have time to get er tuned in this weeked. Yes I could talk bikes all day long as well.
Hello came over from bucking channel been catching up on your vids can't wait for your videos login with mules that is how I started out 50 years ago 2 dollars a day and the fellers got 10 I was 9 it was big fun by the way from Missouri ozarks I would be proud to be on your map keep up the good work
LOL I have a bone to pick with you Ironhorse. So I'm rummaging around YT trying to entertain myself and I come across your channel. So I watch a couple and think to myself, I don't know who this guy is but he seems to be making some sense and knows a thing or two. So I watch few more and a few more. Well the way a figure it Ironhorse you owe me the better part of a day! Your videos are ridiculously addictive. Thoroughly enjoyed your videos Mate! A big shout out from New Zealand.
That is a awesome story! 🤣🤘🏻I cant wait to see you make the saw a screamer! To be honest I never paid any attention to if it was an x-torq? I just bought it second hand, tuned it, run motul T2 off road dirt bike oil and used the crap out of it. Looking forward to it!
@Darrell VanHammerSlammer still have to get one, but the pro mac 10-10 has an attitude right now - maybe it is the gas line..... Going pretty good otherwise, just too warm to cut or split wood. How are you, did you get your saw back from Ironhorse?
Iron horse .first time watching your videos I'm a big buckin fan watch him every other day. Now I'm gonna be following yo probably every day I'm on the computer . props brother.
It’s my grandpa saying “If ya ain’t got nothing nice to say then keep your mouth shut!” Them darn “trolls” are just rude and ugly people. They got miserable lives and they try to pull people down! It’s a shame that some folks like your history buff friend... don’t have the upbringing or lives lived to be able to tell the negative Nancy’s to go pound sand at to shut the hell up! We’re all different and we’re all the same. We can learn something from everyone around us and that’s what we should be doing. Looking for the good and learning and sharing positive vibes and love! I’m a half a hippie and I am laughing my ass off about the guy that ran out his flip-flops getting down the road! Just didn’t understand that logger sense of humor!!! LMFFAO!
I have been watching you and bucking for a bit. Love the both of you and the kindness. I have been wondering if you have done any playing with nitro methanol in any of your builds? Would love some footage of explaining how.
Yes I have! It’s a little scary! Don’t really want to put it on video! If you want to play with it and have a saw with around 300 pounds compression email me and I will walk you through it!
I'm a new sub . Good story. I know first hand about saws and skin. The saw don't care about skin . I have scars on my leg too prove it. You end up with a lot more respect for them afterwards. Buchanan said your the best..😊
I have a 372xp that I purchased used. It's pretty worn, showing some scars lol. I emailed you for your input on how to go about getting it tuned and or modified. I also have a 390xp that's wants some attend lol.
Lots! Some saws don't get big gains when ported! But the272 eat it up! Pound for pound abuilt 272 will eat a 372 that's had the same work done! BUT! A lot of times you have to build the bottom end too!
@@brianfloyd8033 hard to pin down! Can get tricky! 400 to 700 top number is if yer crank is ok! If the saw runs decent likely the low number! I try hard to keep the cost down! You pay shipping both ways!
🤣🤣🤣 I have always been a fan of the Wiesco in bike engine but only after figuring out they need a little more tolerance when set up,to swell then some other brands.Are you finding this in these saw pistons as well?
In the bikes it's still that way! These pistons in a saw are super stable! I will show in my next video the recommended clearance! It's zero! But I leave 2 thou! I don't know this as a fact but I heard the material is the same as top fuel pistons! What I do know is the only way to hurt that piston is to run it way too lean or strait gas the saw! I have 2 saws out there running16.000 rpms one of them buckin Billy has got!! The first 371 I sent him!
I got a question Ironhorse - do you ever build your own handles for any of your saws? I want a full wrap handle for my Stihl MS 381, but they don`t make that kind of handle for that saw which means I need to make one myself. Sure could do with some advice on how to build a handle from scratch or how to modify the existing half wrap handle. Thanks for the great vids.
Hi Harvey and subs, I’m a carpenter and use a 575xp xtorque to gang cut rafters- stair stringers and floor joist. I’d like to use a mill with it too. In your opinion is that a saw worth building.? I’ve never run a 372 but I bought my 575 because I was told it was similar performance just heavier and as a result less expensive used. If you think it would be worth it I’d like to have you build my saw. Thx for the videos brother!
I love your channel brother! Keep up the good work! Have you ever knurled the skirt of a piston and sand it down till it fit in the cylinder nicely. We did it when I used to race motocross and it stopped piston slap and held oil better along with chamfering the hole on the front of the piston with a small drill bit. At least that’s what I was told. Do you have Any thoughts on doing those mods?
My 562xp husqvarna on the exhaust side its scoring just a little. Is that something I should worry about. I still use it to fell bigger tree's. It has a 24" bar and chain. 3/8" pitch and .050. If I could get some prices on building it to run like a scalded dog that would be awesome. Thanks! And oh I just now sub to your channel!!
Hi are the dominat wiseco pistons chainsaw specific or are they designed to fit another type of two stroke engine? Only asking as thet don't seem to list chainsaws on their website when looking for parts. Thanks for the great content
Hey been catching up on all your videos what's you take on single ring and double ring pistons I had a 70 yz 100 bike has single ring hard to find piston before Ebay but my bike shop had a rm 100 double ring piston that matched pin to tdc height and my bore just had to trim the skirt and seemed like it lasted forever that's the last time I had to go in that motor did the crank at same time it wont cheap do you mess with rod main bearings on these like bikes😁 keep up the good videos
Just saying but the YZ didn't come out until 74....we had a 72 rt100 which was the first year with the reed induction. That bike was highly ported piped and modified for flat track racing in the early to mid 70's. My last Yamaha Enduro was a 71 dt250....no reeds.
Might have been mid 70s it had the nice aluminum tank bored it out new rod on the crank then couldn't find the piston before Ebay was around fun little bike then I got the 84 kx 250 then there was no turning back
@@pdaddyblake yes I think the 74 and possibly 75 had aluminum tanks....and that was because Honda had just released the elsinore 125s and 250s with aluminum tanks
Ironhorse - thx for your content - i like your stuff very mutch. The talking on the trolls ... They want that you respond - thats what they try - they want you get angry ( well, you or the ppl in the comments ) You get them strongley mad, if you all dont respond on their comments - to ignore them, it is the biggest punishment for them. Sad that i cant be on BuckinStock to meet you Greetings from germany #BeKind
Love the channel Harvey! I love everything power saw. I am likin' the stories you have to tell as well. I have a woods ported 372XP non X-torq. Would I benefit from installing a Dominant piston? I have a Dominant muffler on it now. Thanks for all your work and taking the time to explain things! Peace.
I STAND BESIDE THIS MAN AND HIS BUILDS. HE PRODUCES POWER LOVE THE STORY
Thanks buckin!! Means a lot to me!!
I’m here because of Buckin’ Billy and my longtime interest in the mechanical aspect of internal combustion. I have a couple of saws that I use for firewood gathering. An old 261 is a bit tired, so I’m going to experiment changing it to a 272 as a backup saw to my 372XP 24” with Buckin’s file techniques done on the chain. Piñon fear it (I’m Nevada).
Another hitchhiker story you might enjoy. A guy stops to pickup a hitchhiker. As they are riding along, the hitchhiker says, “Nice of you to stop. I guess you aren’t worried about the possibility of me being a serial killer.” The driver says, “What are the chances of two serial killers being in the same vehicle.”
Thanks for sharing your expertise.
Great story. almost spilled my morning coffee.The wife gave me the look
WANGO
Harvey I hope your ready for where this channel is going. You subscriber count goes up everyday. I will tell you why. You are a good genuine person. You have faults and aren’t afraid to own them, and we love you for it. Great story, I wonder what that hippy is doing now. Really looking forward to the saw builds. It is truly with love that I tell you have a great day and please give my best to you family.
Thanks Patrick! Means a lot!
Harvey love ur stories , reminds me of my best friends father , he was a very good man ,a large man, always had a good story to tell . he loved play tricks on people and was funny as heck! keep the stories coming ! good info on the saw builds !
Thanks! Got more comin!
I cant get over your channel. The info so solid, and you got a blackbelt in storytelling. Huge respect from canuckastan
Man oh man I'm glad you made it to hospital & that doc fixed you up, this is one hell of a video & a hell of a story I've not laughed so much in ages & it's the way you talk & behave on camera I feel I'm sitting in the same room as you! Love it all, the saws, the knowledge, the character & the stories. This is great stuff 😬❤️👍
Thanks for recommending this channel to me Mikey! I like his style! Take care friend!
Pretty cool eh bud, mind say where your from & Harvey will get ya pinned on the big map, shine on mate 😀❤️👍
@@mikeyyoyo6464 You bet! Harvey, you can put a pin in the state of Kansas, in the USA!
Mikey!! Always a pleasure to here from you! So glad yer here! I love reading yer comments! Wish I could give you another thumbs up! It lets me do only one take care mY friend from scotland!!
Glad you got taken care of Sir! Mikey Yoyo told me about your channel. I'd heard Buckin mention ya, but didn't realize you did videos as well! I'd love to see video of you working on these saws! I'm a mechanical guy, so I appreciate, not only running saws but enjoy watching and learning the mechanics of saws and upgrades.
You got it buddy! Watch the next video! Welcome to our channel! Real good people here!
@@theironhorse6600 Thanks Sir! Thanks for the warm welcome and I'm glad to be here! I will definitely be watching it!
I use the same pistons. They work well and you won't burn them up either. There is timing on the intake skirt. If you stay around 0.030 you will be ok. If you remove the cylinder base gasket that's 0.020, so only take 0.010 off the skirt. If you go over then ya gotta use a degree wheel to time it. Great videos, I like this shit!
Oh, man. That story! Hilarious. I think I hurt myself laughing 😅
When he said " and there wasn't anything wrong, he just didn't know it." I almost pissed myself.
Hey Harvey I love you videos I have an old Husqvarna 61 with a 24 inch bar I'm just a homeowner wood cutter for my wood stoves but boy that saw sure has cut a lot of wood and has never given me a moment's problem.
Same here. Not the fastest, But always starts and cuts wood. What more can you ask for.
Love your stories. Can't wait for more saw builds. Keep up the positive vibes. This channel is going to grow because you are real no BS.
I seen this notification after a tough ol' day,and I cheered up.. Harvey I look forward to your vids,I'd watch em even if u talked about the weather💥👍
Greatm. Funny you should say! Might just cover the weather soon! No joke! But it's gotta be funny!
I loved the story, keep them coming.
Hey Lane! Keep on keeping on keeping on! Stay safe my friend! I'm gonna play a joke in you sometime and yer never gonna see it comin! All in good fun!
Harvey I'm new to your videos so far I'm hooked , I'm a buckin fan and I'm impressed with your work and outlook at life hopefully we can do business soon 👍👍 love how you share your lifetime of knowledge and skills of building saws ✌
Great content on this channel. like the saw talk a lot and great stories. Please keep it coming.
Thanks Harvey I really like the education you give on all of these different saws. Love it
Buckin is right you are a good man. like your stories
I would like to see the full build on both those saws and a comparison after they are done. Love the content Ironhorse. Keep the videos coming.
I dont mean to be off topic but does someone know of a tool to get back into an instagram account?
I somehow forgot my account password. I would love any tricks you can give me.
@Joshua Yousef Instablaster ;)
@Luciano Omar thanks so much for your reply. I got to the site thru google and Im trying it out atm.
Looks like it's gonna take quite some time so I will reply here later with my results.
@Luciano Omar It worked and I finally got access to my account again. I am so happy!
Thank you so much you really help me out :D
@Joshua Yousef glad I could help :D
Harvey that was a great story ! I just done a head gasket delete on my 372 xtorq with the muffler mod and little tuning it's "bad" little saw !
That was a great story!! Love it! Thanks for sharing!! Would live to see that saw build also. I have a saw i gotta fix. Something to learn on. Ms260. Needs a new top end. Should be able to figure it out. If not im no worse off than i am now cause it doesnt run. Ive got $30 into it so far so a little more wont hurt. Anyway, STAY SAFE!!
Thanks buddy! You can fix it ! I know you can!
16000 rpm, awesome!looking forward to seeing those builds.Takecare MJ
New subscriber from NE Ct and coming from Buckin. Enjoy your stories and knowledge on saws. I am lucky to be the only one permitted to cut on a 400 acre 18th century farm so I am always trying to keep up with the deadwood. Between you, Buckin Billy Ray and Mike Morgan, I truelly love to hear about the woods. Keep it going and thanks. PS: Great story, keep them coming!!!
I met u thru Billys channel, asked him bout a saw, he said hit up Ebay, I said NO! I wanna met U, now... yur my New idol! u rock Harv!!! ur old school, like me!! ^5s bro ^5
Nice I hope to be riding dirtbikes this weekend to, I haven't been out this year at all. I just picked up another 81 pe 250 that's running real rich for some reason. And have to get the forks re-sealed on my 14' 450 Honda. I actually need to do work on all my bikes, But that's the two bikes I want to run this weekend. when a guy owns to much crap its hard to maintain it all. I'm sure you know what that's all about. Alot of people seem to talk crap about wiesco pistons, but that is all I run in my bikes and have never had an issue. Snowmobiles on the other hand well that is a different story. Haha great story I bet that fella never ever forgot his ride with you two crazy loggers!
Always liked those pe bikes! They had a nice ride! I enjoy talking bikes! And saws! And everything else!
@@theironhorse6600 yea a tall seat and wide bars. there nice bikes to ride. Hopefully I have time to get er tuned in this weeked. Yes I could talk bikes all day long as well.
Hello came over from bucking channel been catching up on your vids can't wait for your videos login with mules that is how I started out 50 years ago 2 dollars a day and the fellers got 10 I was 9 it was big fun by the way from Missouri ozarks I would be proud to be on your map keep up the good work
Tom! Glad to here from you old timer! If you don't know how to talk mule they don't work good for you! They are smart!
LOL I have a bone to pick with you Ironhorse.
So I'm rummaging around YT trying to entertain myself and I come across your channel. So I watch a couple and think to myself, I don't know who this guy is but he seems to be making some sense and knows a thing or two. So I watch few more and a few more. Well the way a figure it Ironhorse you owe me the better part of a day! Your videos are ridiculously addictive.
Thoroughly enjoyed your videos Mate! A big shout out from New Zealand.
I love the videos! Trying to go back and get caught up from the start. Great story too.
Love your stories thanks ironhorse
Hey Matt! Thanks man!
Absolutely loved that story!
That is a awesome story! 🤣🤘🏻I cant wait to see you make the saw a screamer! To be honest I never paid any attention to if it was an x-torq? I just bought it second hand, tuned it, run motul T2 off road dirt bike oil and used the crap out of it. Looking forward to it!
I’m
Keep the good positive knowledge coming, great story.two thumbs up 👍👍
Interested to see how the x-tourque comes along - thank you for the content, Ironhorse!👍
@Darrell VanHammerSlammer still have to get one, but the pro mac 10-10 has an attitude right now - maybe it is the gas line..... Going pretty good otherwise, just too warm to cut or split wood. How are you, did you get your saw back from Ironhorse?
I enjoyed your story and all the information thanks.
Iron horse .first time watching your videos I'm a big buckin fan watch him every other day. Now I'm gonna be following yo probably every day I'm on the computer . props brother.
God Bless and Protect you and your family IRONHORSE!!!
Love that story it was great I got a good chuckle out of that
Great video once again. Dont worry about what trolls say. We will deal with them
Buckin sent me! Love your channel. Subbed.
LMAO Love that story about the hitch hiker.
It’s my grandpa saying “If ya ain’t got nothing nice to say then keep your mouth shut!” Them darn “trolls” are just rude and ugly people. They got miserable lives and they try to pull people down! It’s a shame that some folks like your history buff friend... don’t have the upbringing or lives lived to be able to tell the negative Nancy’s to go pound sand at to shut the hell up! We’re all different and we’re all the same. We can learn something from everyone around us and that’s what we should be doing. Looking for the good and learning and sharing positive vibes and love! I’m a half a hippie and I am laughing my ass off about the guy that ran out his flip-flops getting down the road! Just didn’t understand that logger sense of humor!!! LMFFAO!
Thank you!
Great video👍
New subscriber from Løkken Verk, Norway.
Harvey is great. you'll like it here. :)
Jonesy boy 💥❤️👍
@@munched55 Ohhhh yes, This is a part of chainsaw heaven too👍🍻
The jonsberg! Friend! Glad ya showed up! Sit down and stay a while!
@@mikeyyoyo6464 Harvey surely knows the best way engine's work. Thinkin about shipping the 254 xpg over to him for some spa treatment 😁
Hello Harvey, new sub here from Buckin Billy, you can mark Iowa on your map when it goes up.
Welcome damon! Sit back and have fun!
I treasure being called "one of us". Believe it, I am. Old Faller Tom.
Thanks old faller tom!! Logging is a tough life! But so rewarding!
Great story!!!!
Great story! God bless
Yes I would like to see that process
I have been watching you and bucking for a bit. Love the both of you and the kindness. I have been wondering if you have done any playing with nitro methanol in any of your builds? Would love some footage of explaining how.
Yes I have! It’s a little scary! Don’t really want to put it on video! If you want to play with it and have a saw with around 300 pounds compression email me and I will walk you through it!
I agree just ignore the trolls. I hope you video that saw build. Cant wait to see the new maps
I'm a new sub . Good story. I know first hand about saws and skin. The saw don't care about skin . I have scars on my leg too prove it. You end up with a lot more respect for them afterwards. Buchanan said your the best..😊
I have a 372xp that I purchased used. It's pretty worn, showing some scars lol. I emailed you for your input on how to go about getting it tuned and or modified. I also have a 390xp that's wants some attend lol.
If the owner is good with it I would love to see a video on the build.
Thanks for sharing Harvey! Good story buddy. 272 husky what can we do to her buddy? Love to watch saw builds
Lots! Some saws don't get big gains when ported! But the272 eat it up! Pound for pound abuilt 272 will eat a 372 that's had the same work done! BUT! A lot of times you have to build the bottom end too!
@@theironhorse6600 what do you recommend ? Rough idea of cost for parts and labor
@@brianfloyd8033 hard to pin down! Can get tricky! 400 to 700 top number is if yer crank is ok! If the saw runs decent likely the low number! I try hard to keep the cost down! You pay shipping both ways!
@@theironhorse6600 not sure if crank is ok cuz piston and cylinder are scored
@@brianfloyd8033 if it needs a crank a good used one is about 50 bucks!
🤣🤣🤣
I have always been a fan of the Wiesco in bike engine but only after figuring out they need a little more tolerance when set up,to swell then some other brands.Are you finding this in these saw pistons as well?
In the bikes it's still that way! These pistons in a saw are super stable! I will show in my next video the recommended clearance! It's zero! But I leave 2 thou! I don't know this as a fact but I heard the material is the same as top fuel pistons! What I do know is the only way to hurt that piston is to run it way too lean or strait gas the saw! I have 2 saws out there running16.000 rpms one of them buckin Billy has got!! The first 371 I sent him!
That is alot of rpms! You may have to invent the first Husky burst panels! 😁
Thanks uncle Harve.
I got a question Ironhorse - do you ever build your own handles for any of your saws? I want a full wrap handle for my Stihl MS 381, but they don`t make that kind of handle for that saw which means I need to make one myself. Sure could do with some advice on how to build a handle from scratch or how to modify the existing half wrap handle. Thanks for the great vids.
I like what you are doing
Hi Harvey and subs,
I’m a carpenter and use a 575xp xtorque to gang cut rafters- stair stringers and floor joist. I’d like to use a mill with it too. In your opinion is that a saw worth building.? I’ve never run a 372 but I bought my 575 because I was told it was similar performance just heavier and as a result less expensive used.
If you think it would be worth it I’d like to have you build my saw. Thx for the videos brother!
Wheel bearing grease for cuts and super glue when you get home
Hahaha, awesome story!
I love your channel brother! Keep up the good work! Have you ever knurled the skirt of a piston and sand it down till it fit in the cylinder nicely. We did it when I used to race motocross and it stopped piston slap and held oil better along with chamfering the hole on the front of the piston with a small drill bit. At least that’s what I was told. Do you have Any thoughts on doing those mods?
Jesse from stephentown ny what a great story
In relation to previous comment - just found the dominant saws web page. Cheers
Great videos can I do a base gasket delete along with a dominant piston and usually still be safe?
My 562xp husqvarna on the exhaust side its scoring just a little. Is that something I should worry about. I still use it to fell bigger tree's. It has a 24" bar and chain. 3/8" pitch and .050. If I could get some prices on building it to run like a scalded dog that would be awesome. Thanks! And oh I just now sub to your channel!!
chainsaws and story time thumbs up
I’d like to see how an x Torq is converted to non x torq. Walt did it on afleetcommand channel, I think. But a more detaile review would be awesome!
Hey Nate! Glad yer here!
Lol that's a great story ironhores 😄
I’d like to see a 390 ported .
Hi are the dominat wiseco pistons chainsaw specific or are they designed to fit another type of two stroke engine? Only asking as thet don't seem to list chainsaws on their website when looking for parts. Thanks for the great content
Hey been catching up on all your videos what's you take on single ring and double ring pistons I had a 70 yz 100 bike has single ring hard to find piston before Ebay but my bike shop had a rm 100 double ring piston that matched pin to tdc height and my bore just had to trim the skirt and seemed like it lasted forever that's the last time I had to go in that motor did the crank at same time it wont cheap do you mess with rod main bearings on these like bikes😁 keep up the good videos
I'll cover all that in an upcoming video! Yeah I split the crankshaft!
Just saying but the YZ didn't come out until 74....we had a 72 rt100 which was the first year with the reed induction. That bike was highly ported piped and modified for flat track racing in the early to mid 70's. My last Yamaha Enduro was a 71 dt250....no reeds.
Might have been mid 70s it had the nice aluminum tank bored it out new rod on the crank then couldn't find the piston before Ebay was around fun little bike then I got the 84 kx 250 then there was no turning back
@@pdaddyblake yes I think the 74 and possibly 75 had aluminum tanks....and that was because Honda had just released the elsinore 125s and 250s with aluminum tanks
Ironhorse - thx for your content - i like your stuff very mutch.
The talking on the trolls ...
They want that you respond - thats what they try - they want you get angry ( well, you or the ppl in the comments )
You get them strongley mad, if you all dont respond on their comments
- to ignore them, it is the biggest punishment for them.
Sad that i cant be on BuckinStock to meet you
Greetings from germany #BeKind
Love to see any of your videos, would love to see a build!!! Keep em coming!!!!
Buckinstock saw build is coming up soon!
Thanks
Funny!
Your up ten times in subscribers over two months. You must being something right.
Best thing for a troll is to delete the comment and block them. Simple.
Show it all very intrested
Hell of a story ,il bet you and your friend still laugh about it.
You still use wiseco piston, where can I get one
Please make a video of this saw. All the best from Scotland..
Love the channel Harvey! I love everything power saw. I am likin' the stories you have to tell as well. I have a woods ported 372XP non X-torq. Would I benefit from installing a Dominant piston? I have a Dominant muffler on it now. Thanks for all your work and taking the time to explain things! Peace.
Yes you would! You gain compression and exaust duration! And a little intake timing! Even unported it's a noticeable gain!
@@theironhorse6600 Thanks for the quick response Ironhorse! I appreciate it, and you for sharing your knowledge!
@@theironhorse6600 I am from Detroit Michigan by the way. Forgot to put that in earlier.
👍👍👍👍👍👍
👍👍👍☮️
How does the dominant piston effect port timing?
Hey bud do anything with stihl ms460/461?
Absolutely!
Can I get a big bore kit for a ms261
what is your email ??
Ironhorsechainsaw@gmail.com
I loved the story, keep them coming.