Thansk for your positive feedback. And you know I can’t do it without support from viewers like yourself. There’s couple hundred videos on this channel so I hope more come in handy for you. Stay motivated and stay grinding out there.
Man I’m loving these videos, I’ve decided to become a diesel mechanic for semi trucks/trailers. I’m going to self learn until I can find a good diesel program. I would like to start with learning the electrical repair first (what I want to specialize in), so I have a power probe 4 master kit, and going to get the fluke 233. Figured I’d start with learning the battery, starter and alternator. I have a truck and trailer as test subjects😂 so At the end of each drive shift i want to do some hands on learning. Please let me know if this is a good plan and if I should invest in any other tools to start off with. Thanks
Thanks for reaching out and watching. I would say being a mech is an endless game of buying tools and cut up up by zip ties. Doing the elec side is how I started and it deff paid off as well. Anyone can change a part but not many can really diag. If your heart is set on it than elec side is the way to go. Fluke all the way. The others don’t compare.
Thanks for watching and reaching out. Can’t do it without support from viewers like yourself. I’m currently running the shop in Az chandler freightliner. So if you don’t mind dealer rates than come on down.
Great question. Depends on the type of vpod and the year of the Eng. this particular one, does not require re learn or calibration. Just plug and play.
Good question., when I get some free time.when I’m at work I just hustle to stay busy and build time and push trucks out. Making vids is a little tough when that’s my mentality.
dd15 spn 3597 fmi 4 freightliner (2015). It makes a whining noise whenever the code is active. My mechanic got me throwing parts at it. I replaced my MCM and both valve cover harnesses and it's still active. In the "detroit service information bulletin", it says to disconnect the OEM 31 pin connector to see if the code become inactive. Where is that sucker located?
Hi I have a truck 2016 freightliner day cab , has spn 411 fmi 1 and spn 3058 fmi 9 I did Delta pressure port Cleaning but still have the light on and off , do you know what is going on with this truck？ please let me know thank you!
Not a problem and glad it came in handy for you. At least with the knowledge of behind the scenes so you know what the dealer would be doing. The scr (selective catalyst reduction) would test the aftertreatment system kinda like a regen but main focus would be on the def side of things. That would be a scr effiencey test. An scr ads test would test the def pump, def doser and lines to find out if theres a leak or restriction. Hopefully they have parts available for you, lately its been nuts...
@@bustedknucklebydieseldr3228 thanks for all the info! What should I tell them to do? Is it called the SCR efficiency test? Do you think they will also do a regen? 😬
@@notanotherusername as long as they follow the proper troubleshooting and verification process than you shouldn’t have to tell them anything. You can always request the tech notes or story to help you feel a bit more confident in there work.
@@bustedknucklebydieseldr3228 thank you!! What is the difference between the EGR valve and the EGR actuator? By the way, I am rewatching your video here and I love your sense of humor 😆
@@notanotherusername appreciate it man. Only a few people get my humor, it’s Deff Strange one. The EGR valve actuator electronically controlles the EGR valve itself. So think of it as one electric piece and one mechanical piece. Both regulate how much exhaust flow will be sent back into the intake for recirculation and raises internal combustion temps. Which is a good thing for better fueling. Hope that clears some things up.
I absolutely need you as my mechanic. Just got out of velocity in Whittier CA after 2 weeks of waiting for a simple😮 dpf filter replacement for 2018 freightliner cascadia. 2 weeks bro, I'm in need, where are you and how can I have you directly as a mechanic sir.
I completely understand your frustration with some dealers you never know what you’re going to get. If you’re looking for a better one, come on down to velocity in Chandler Arizona. Much quicker work and great people to deal with.
This code is typically a parameter issue or switch issue for the engine brake switch. Either switch is bad, wiring has an issue , or the parameters need to be checked incase it’s not being seen anymore.
The jake brakes seem to be working fine. Is there wiring on the actual engine to check? I have a little scan tool for regen purposes. I reset the code, but it comes back. 🤷♂️.
@@Poppi3579 there is and depending on year of Eng it changes slightly. But t/s would have you separate under valve cover wiring from engine sensor harnes wiring and see which side has the issue. But it’s best to start with a diag computer and see if the switch is registering otherwise we’d be wasting much useful time.
Mr Diesel Doctor my truck has the following codes: SPN 2659 FMI 18 EGR Flow Target Error Diagnostic - Low flow SPN 3058 FMI 10 Exhaust Gas Recirculation Slow Response SPN 411 FMI 1 EGR differential pressure too low (high box) I changed out the EGR Cooler and the Delta P sensor but the codes won’t go away. Would swapping out the EGR actuator make these codes clear?
Thanks for reaching out. Those low flow codes are mainly EGR actuator error or EGR valve being stuck issues. Best advise is to go through the t/s for 2659 which has you verifying its working correctly than go from there. Without a diag computer it’s going to be hard to accomplish because that tells you a lot of what you need to know. But more than likely we’re looking at a EGR actuator issue. And don’t forget these videos can make great holidays gifts.
Thanks for watching. This coat to be a tricky one and can often be caused by back pressure in the aftertreatment system. In which no repair is really necessary. There might be an issue with the delta P sensor or clogged ports, any exhaust leaks or boost leaks, Or strangely enough if the DPF needs a region is for too long can cause this code. Really we just need a diving with a computer I hope that helps and appreciate your support in this channel
@@bustedknucklebydieseldr3228 one of the ports to the delta p sensor was blocked. Cleaned both ports and replaced the sensor just in case. So far no code 1,000 miles after the repair. Thank for your help
@@paulb.5497 that’s great to hear man. Let’s hope it stays that way. Glad to know you’ve found an issue and saved $$$ instead of sending it to you know where. (A dealer)
For starters your check eng light would be a good indicator. After that, you might notice a derate in power, slower take offs,more frequent regens due to dirtier running engine,.Things like that. Good question though.
Hi Dr I have Cascadie 2019 with DD12 automatic transmission unfortunately it doesn't work properly When going to uphill gear 7;8 or 9. randomly switch N position just 2-3 second after running good again. The computer screen shows " Starter Blocked Switch to Neutral".. Can you help me what the problems?? Thank you
could you teach me how to do Zonar? Not too many people know how to do it and the ones that do know don't want to train me. Also I'd love to learn how to do adaptive cruise control fixes. I really appreciate you, much love from SWIFT
I swapped 2019 motor into 2016 cascadia after that i am having rough driving speedometer hoes ups and down feels like motor is not getting enough air and trying to breathe
This could be bad programming or poor fuel flow. Would really need to get hands on and see what’s it’s doing. I would start by u plugging the fuel meter on fuel pump and see if it helps.
great video. quick question I have low voltage on my 2013 freightliner with a dd15. I have new batteries and new alternator and my voltage is still at 12volts. what could be causing the low voltage?
Great question, that issue is typically caused by a bad wire or fuse to the remote sense. Check that fuse and ensure it’s good. With that blown it’ll never act right. After that you may be getting poor grounds to the cab of its reading wrong and your alternator is truly putting out 14v. Check the actual alt output than fuse than sense wire. Let me know what you find. .
@@jorgefacio690 yes sir that would be for the alternator telling it to charge to batteries. It’s there to let the alt know what voltage the batteries are at. This is tricky since yours is a 2013. It could be in a pdm on the d/s fender or under the cab above the batteries with a few other mega fuses or p/s firewall by hvac box. Those years they were experimenting with diff locations with fuses.
Always appreciate the positive feedback. Can’t do it without support from viewers like yourself. I can’t mention the name on here but hopefully that’ll change if I can get my own place one of these days.
I have to say you’re a good teacher thanks for the great information that you’re doing you just save me time and money. I did it myself
Thansk for your positive feedback. And you know I can’t do it without support from viewers like yourself. There’s couple hundred videos on this channel so I hope more come in handy for you. Stay motivated and stay grinding out there.
You know even if have no issue I like to look in your troubleshooting , keep going buddy.
Appreciate the positive feedback. Hope more vids on channel prove useful and come in handy for you.
great video, really appreciate your videos, I learn so much
Man you make it look easy it would take me 3 days to do that
Appreciate it man. Took me 7 days. Just movie magic. Haha
@@bustedknucklebydieseldr3228 what state u in bro
Sure do wish you had your own shop close to oklahoma city
God bless you all your high life
Man I’m loving these videos, I’ve decided to become a diesel mechanic for semi trucks/trailers. I’m going to self learn until I can find a good diesel program. I would like to start with learning the electrical repair first (what I want to specialize in), so I have a power probe 4 master kit, and going to get the fluke 233. Figured I’d start with learning the battery, starter and alternator. I have a truck and trailer as test subjects😂 so At the end of each drive shift i want to do some hands on learning. Please let me know if this is a good plan and if I should invest in any other tools to start off with. Thanks
Thanks for reaching out and watching. I would say being a mech is an endless game of buying tools and cut up up by zip ties. Doing the elec side is how I started and it deff paid off as well. Anyone can change a part but not many can really diag. If your heart is set on it than elec side is the way to go. Fluke all the way. The others don’t compare.
Thanks! That’s exactly what I needed to hear. I’ll focus on being the best diagnostician and specializing in electrical repair. Thanks again.
Your channel is great have learned a lot since I subscribe to your channel please keep this good content coming also we’re are u located.
Thanks for watching and reaching out. Can’t do it without support from viewers like yourself. I’m currently running the shop in Az chandler freightliner. So if you don’t mind dealer rates than come on down.
Do you have to do a relearn for a VPOD replacement?
Great question. Depends on the type of vpod and the year of the Eng. this particular one, does not require re learn or calibration. Just plug and play.
You're the best
What if you replaced harness and the actuator works and then don’t
Than I believe the issue is in the learn procedure or the programming
When are you dropping a toolbox tour?
Good question., when I get some free time.when I’m at work I just hustle to stay busy and build time and push trucks out. Making vids is a little tough when that’s my mentality.
Where can I find this information for my 09 Cascadia with dd15? Trying to see if I should also be getting 60 ohms on the 4-pin connector
Nice. Thanks
Good job
That bottom right hand bolt was still loose when you were tightening the pull rod, hopefully it got tightened again.
dd15 spn 3597 fmi 4 freightliner (2015). It makes a whining noise whenever the code is active. My mechanic got me throwing parts at it. I replaced my MCM and both valve cover harnesses and it's still active. In the "detroit service information bulletin", it says to disconnect the OEM 31 pin connector to see if the code become inactive. Where is that sucker located?
Hi I have a truck 2016 freightliner day cab , has spn 411 fmi 1 and spn 3058 fmi 9 I did Delta pressure port Cleaning but still have the light on and off , do you know what is going on with this truck？ please let me know thank you!
Thank you for walking us through this. What is the SCR test? I’m at Freightliner and they are going to be doing the exact same thing
Not a problem and glad it came in handy for you. At least with the knowledge of behind the scenes so you know what the dealer would be doing. The scr (selective catalyst reduction) would test the aftertreatment system kinda like a regen but main focus would be on the def side of things. That would be a scr effiencey test. An scr ads test would test the def pump, def doser and lines to find out if theres a leak or restriction. Hopefully they have parts available for you, lately its been nuts...
@@bustedknucklebydieseldr3228 thanks for all the info! What should I tell them to do? Is it called the SCR efficiency test? Do you think they will also do a regen? 😬
@@notanotherusername as long as they follow the proper troubleshooting and verification process than you shouldn’t have to tell them anything. You can always request the tech notes or story to help you feel a bit more confident in there work.
@@bustedknucklebydieseldr3228 thank you!! What is the difference between the EGR valve and the EGR actuator? By the way, I am rewatching your video here and I love your sense of humor 😆
@@notanotherusername appreciate it man. Only a few people get my humor, it’s Deff Strange one. The EGR valve actuator electronically controlles the EGR valve itself. So think of it as one electric piece and one mechanical piece. Both regulate how much exhaust flow will be sent back into the intake for recirculation and raises internal combustion temps. Which is a good thing for better fueling. Hope that clears some things up.
I absolutely need you as my mechanic. Just got out of velocity in Whittier CA after 2 weeks of waiting for a simple😮 dpf filter replacement for 2018 freightliner cascadia. 2 weeks bro, I'm in need, where are you and how can I have you directly as a mechanic sir.
I completely understand your frustration with some dealers you never know what you’re going to get. If you’re looking for a better one, come on down to velocity in Chandler Arizona. Much quicker work and great people to deal with.
521027 I have the same code on my dashboard but when I turn the truck off and I turn it on the code go off you think it’s big issue ?
👍👍👏👏😃😃
I have Spn 0973 and Fmi9 code. Can’t find a fix or anything on these codes anywhere. Dd15 Freightliner Cascadia. Any idea?
This code is typically a parameter issue or switch issue for the engine brake switch. Either switch is bad, wiring has an issue , or the parameters need to be checked incase it’s not being seen anymore.
The jake brakes seem to be working fine. Is there wiring on the actual engine to check? I have a little scan tool for regen purposes. I reset the code, but it comes back. 🤷♂️.
@@Poppi3579 there is and depending on year of Eng it changes slightly. But t/s would have you separate under valve cover wiring from engine sensor harnes wiring and see which side has the issue. But it’s best to start with a diag computer and see if the switch is registering otherwise we’d be wasting much useful time.
? I drive check engine light comes on,I let up fuel pedal and it goes back to normal,little smoke. Think my actuator valve is bad?
I changed turbo out new Vpod, new Delta P and IMAP Sensor and now I’m getting this code
SPN3058 FMI 10?
Any help appreciated
Mr Diesel Doctor my truck has the following codes:
SPN 2659 FMI 18 EGR Flow Target Error Diagnostic - Low flow
SPN 3058 FMI 10 Exhaust Gas Recirculation Slow Response
SPN 411 FMI 1 EGR differential pressure too low (high box)
I changed out the EGR Cooler and the Delta P sensor but the codes won’t go away. Would swapping out the EGR actuator make these codes clear?
Thanks for reaching out. Those low flow codes are mainly EGR actuator error or EGR valve being stuck issues. Best advise is to go through the t/s for 2659 which has you verifying its working correctly than go from there. Without a diag computer it’s going to be hard to accomplish because that tells you a lot of what you need to know. But more than likely we’re looking at a EGR actuator issue.
And don’t forget these videos can make great holidays gifts.
Thank you sir I really appreciate it!
Another good video.
Have you dealt with code spn 3058 fmi 9? The truck is a 2016 Cascadia with DD13. It is egr related, but that’s all I know.
Thanks for watching.
This coat to be a tricky one and can often be caused by back pressure in the aftertreatment system. In which no repair is really necessary. There might be an issue with the delta P sensor or clogged ports, any exhaust leaks or boost leaks, Or strangely enough if the DPF needs a region is for too long can cause this code. Really we just need a diving with a computer I hope that helps and appreciate your support in this channel
@@bustedknucklebydieseldr3228 one of the ports to the delta p sensor was blocked. Cleaned both ports and replaced the sensor just in case. So far no code 1,000 miles after the repair.
Thank for your help
@@paulb.5497 that’s great to hear man. Let’s hope it stays that way. Glad to know you’ve found an issue and saved $$$ instead of sending it to you know where. (A dealer)
Hey if the egr is deleted ??the valve work too???
Hi, what usually symptoms are from bad valve actuator? Thanks
For starters your check eng light would be a good indicator. After that, you might notice a derate in power, slower take offs,more frequent regens due to dirtier running engine,.Things like that. Good question though.
What brand diagnostic tool do you use?
I use the actual diagnostic link software from Detroit. Works the best and no guessing.
Once you see the lion face, you can't un see it. HAHA
The beast, to bad they dont have more hidden faces around the eng.
Alright I guess I’ll be the first to say it, when do we get a tool box tour?
Hi Dr I have Cascadie 2019 with DD12 automatic transmission unfortunately it doesn't work properly When going to uphill gear 7;8 or 9. randomly switch N position just 2-3 second after running good again. The computer screen shows " Starter Blocked Switch to Neutral"..
Can you help me what the problems??
Thank you
that is a great job. please link the FMI sheet to your video
could you teach me how to do Zonar? Not too many people know how to do it and the ones that do know don't want to train me. Also I'd love to learn how to do adaptive cruise control fixes. I really appreciate you, much love from SWIFT
I swapped 2019 motor into 2016 cascadia after that i am having rough driving speedometer hoes ups and down feels like motor is not getting enough air and trying to breathe
This could be bad programming or poor fuel flow. Would really need to get hands on and see what’s it’s doing. I would start by u plugging the fuel meter on fuel pump and see if it helps.
Mine is a 2015 DD15. Does it need it?
Only if it’s throwing specific codes
What if it has 2 fault codes 9/14?
great video. quick question I have low voltage on my 2013 freightliner with a dd15. I have new batteries and new alternator and my voltage is still at 12volts. what could be causing the low voltage?
Great question, that issue is typically caused by a bad wire or fuse to the remote sense. Check that fuse and ensure it’s good. With that blown it’ll never act right. After that you may be getting poor grounds to the cab of its reading wrong and your alternator is truly putting out 14v. Check the actual alt output than fuse than sense wire. Let me know what you find. .
@@bustedknucklebydieseldr3228 so that fuse is for the remote sensor for the alternator? if so where is located?
@@jorgefacio690 yes sir that would be for the alternator telling it to charge to batteries. It’s there to let the alt know what voltage the batteries are at. This is tricky since yours is a 2013. It could be in a pdm on the d/s fender or under the cab above the batteries with a few other mega fuses or p/s firewall by hvac box. Those years they were experimenting with diff locations with fuses.
@@bustedknucklebydieseldr3228 ok then ill check it out. thanks
@@jorgefacio690 I know there’s others on here watching and waiting to know what you find. Keep us informed.
Awesome videos man I appreciate you!!!! What shop do you work at
Always appreciate the positive feedback. Can’t do it without support from viewers like yourself. I can’t mention the name on here but hopefully that’ll change if I can get my own place one of these days.
Can I get the model number of the impact gun you are using?
That one is actually outdated now. There’s a newer much better one out there. Milwaukee fuel Impact 3/8. I think that new one has 600ftlbs break away.
What state u in bro
I’m out in Az.
Hey man I got a few codes on my truck can you see if you know what these are (pretty sure you know)
1. 2659
2. 3061
3. 520371
Can you please help me
@@daniellugo8712 always. A 12 pack and couple wrenches we can fix anything. what’s going on with your truck.
Thank you