This Pump is a cyclic water pump powered by hydropower. It takes in water at one "hydraulic head" (pressure) and flow rate, and outputs water at a higher hydraulic head and lower flow rate. Applications: 1. Pumping drinking water from streams that have significant slop. 2. Lifting irrigation water from streams or raised irrigation channels. 3.Lifting drinking water from springs to settlements on higher ground.
For all those who don't understand. This is used when an unlimited supply of water is available above the pump. Like a river or pond etc. It is then pumped to higher ground over great distances. It's not high volume but makes up for that by constantly running without using an outside power source. Water is not wasted. It's simply put back into the ground where it belongs. Ideal usage is to pump to higher elevation to a holding tank. Great system.
This is a nice manufacture of an old idea, one of the old family farms in England in the 1800s used a cast iron version of this to get all the farm's water from a lower stream. It's totally free to run, the energy to lift the water comes from the water that is returned to the stream flow. While the flow may be slow, it's running 24/7 so if you over use in the daytime it can catch up in the night. There really should be an outlet pipe for the water returning to the stream just so that it doesn't damage the foundations of the pump machine.
Thanks, for a great demonstration of how water hammer works. It would be a nice tap water system by the creek. The amount of water lifted by this device is less than input. The potential energy of the incoming water plus the wastewater equals the potential energy of the outgoing water in heigh level.
Aqui no Brasil chamamos de: bomba carneiro. Realmente funciona! Esta do vídeo está mais bonita do que funcional, o funcionamento é questionável pois a água sai corrente e não pulsativa. Apesar dos pesares, parabéns pelo vídeo! Eu gostei e ficou legal! Congratulations!
OMG the comments are frustrating, not sure why people who's knuckles drag along the ground when they walk click on non cartoon's on youtube. This pump has been around for a long time and has worked very well for it's application, well done to the person who built this one, it was working beautifully
The comments are frustrating for sure. Imagine thinking you can break Newtons physics and that free energy is actually a thing. You'd have to be so ignorant that you ignored grade 5 science class entirely
These used to quite common where I live. I think that some of them were used in series to reach higher. Not sure how that would work, so I might be wrong. The source was usually a river with a dam providing the water head to run the ram pump. There are remains of some of them still in existence, but not used any more.
To clarify- the "waste" water just goes in to the river below the dam, so it's not wasted. It's not "free" energy of course. The energy is provided by the sun which creates the clouds that provide the rain upstream. However, the sun still has millions of years left to continue supplying energy before it dies.
Team Ram pump!!!!! Cool 😎 long story short! Nice valve! Or if you want to get all science spicey and attract some nerd adore 💕 Them you can explain. NICE VALVE with nice valve(s) control
Your video is very good quality. Great sound and picture. Thank you for sharing your experience, techniques, tips and especially your very compelling video. I wish you health and success offline. and soon create many great videos. I support you.
You know how much money you can save as a small scale farmer like this. Pair this with a few 12v pumps and some solar panels and there's virtually no limit to how large you can scale this
The reason this works is the drink bottle at the top of the pipe. As the water siphons from the 5gal jug it fills the pipe and pressurizes the bottle. As the water flows back out the bottom valve, the pressure in the bottle manages to push a small portion of the water through the top check valve. Eventually this will fill the hose going to the tank on the roof. It's limited to the height this would work; at some point the weight of the water going up the hose to the tank would exceed the pressure in the bottle and all the water would then flow out the "release" valve. This works, but it's not "free" energy. Stored potential energy in the water as it falls to a lower gravity state is what drives the system. An Archimedes' screw is far more energy efficient and can pump more volume.
As to the maximum altitude limitations problem where the weight of the water reaches a point where all the water goes to the release valve, I would say that I have a theory that might work. Lets say you want the water to go up like 4 times higher than the maximum altitude you can get it from a standard ordinary hose, I would say that using much thinner hose, like those 1/4" polyethylene white tube pipe hose commonly sold for Reverse Osmosis (RO) filters and its cartridges, those hoses are so thin going upwards would not render the same weight ratio than going upwards with one of those bulky fat hoses, therefore you should be able to get that water much higher with those 1/4" hoses.
There is no realistic height limit to this system. Merely use the exit hose to fill a tank about 10 feet above the height of the unit, then use the tank as the source for a second Ram Pump to lift it to a second tank 10feet up, & so on. Multiple pumps will bring usable water to many elevations.
I just watched this video cause i read a comment of someone saying the great pyramid of Gizah looks like a giant ram pump. If somehow that's true you can get an idea of the scale it could had reached with thousands years old technology.
Hi admin thank you very much for the idea you shared its great! If you dont mind can you give the measurement of the coupling ,elbow,other things ,..thank you
It is a water whip, hydraulic ram, water hammer ... It needs running water for its activity, preferably from a stream. Cannot be used in a well. The hydraulic ram can pump to a height of about 5-10 percent of the inlet water volume. We have been using it in Europe since the 18th century.
have several questions. 1- Can you tell what should be the ratio of the diameter of the outlet pipe to the inlet? 2-Which dimensions are important? I tried your design but it didn't work. Would you please tell me important tips? thanks
I once had and used a Water Ram Pump for my drinking and bathing water (filtered from a spring of course). I built a 2 foot Dam, and had the opening starting at 4in diameter down sized to 3/4in - 50 foot downstream for maximum back pressure which you need to make these work properly. The only issue I had is freezing water during winter. I think I paid $85 for mine online.
Bernoulli's principle,,, there is an old dam in the Philippines built by Spaniards pumping water from river up to reservoir and still pumping to this date.old technology.....
Water hits the valve going out. That water, hitting the valve that closes, pushes that momentum up into the pressure tank which creates backpressure to "pump" the water. Still gonna cost about $40
depends how much the volume is inside the first hammer chamber.. the more the higher..and the more pressure... but like this is should reach about 20 feet easy
Intake hose should be 15 feet or longer, he was cutting it close,, your outtake can be as long as you want,,,, as long as you're elevation is high enough on intake,,,, meaning he needed to move that jug of water higher to get any more height on his pump, ratio is about seven 1 to 7
The drain is not working in turn to pump it up. How to do it? Does it have to do with the pressure of the incoming water? Does it have to do with the distance of each pipe? Do the two bars need to be the same height to work together?
@Square Sushi Can we use this principle for first floor when there is a low supply of water . In our house four portions are there. For our house we are facing the water problem.
Is There a reason why u keep the pipe behind "water in" Open ? Would thought The pressure would be better for "water out" without the water leaking out behind..
I made exactly the same assembly, with the same components, but I couldn't get the pump to work. The swing check valve on the left stays either open or closed, but doesn't perform the random movement where it rejects a little water and closes/reopens by itself. I don't know what to change to make it work, it's exactly the same type of equipment I bought, and I fitted it the same way you did. Does anyone have any ideas?
Ugh! Thier never should be an argument about most of the devices that make free energy because you always need a human! Those negative lazy arses just waste people's time complaining and not about anything worth while!
I have a friend in Lisbon with a well, but no power. Would this setup work, if we could use a small solar Fishpond Sprinkler Pump to take water from the well and push it through the Ram? There is not a lot of “push” from a little pump…but would the Ram would provide the “push necessary ??
There is no free energy! It is driven by kinetic energy of water .... From the efficiency point of view, it is highly inefficient because it wastes immensely more water than it can pump! Its great limitation is that it depends on the existence of running water and with unevenness .... But it can be a small-scale solution, provided you meet the requirements ...
If you do thath the pressure will get lost so it's not good to do it as we say in Hindi Kuch pane keleye kuch Kona padtha hain means to get something we need to lose someting it's like that
How can you improve it to where it's not wasting water coming out of the bottom of the pump where that water can return to an upper level or the tank or ???
if we are using this to fill up reserve tank and put float valve at the end of it, then we will need to trigger the ram pump to run again in order to 'restart' them, right?
You're doing a fantastic job! Just a quick off-topic question: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How can I transfer them to Binance?
This Pump is a cyclic water pump powered by hydropower. It takes in water at one "hydraulic head" (pressure) and flow rate, and outputs water at a higher hydraulic head and lower flow rate.
Applications:
1. Pumping drinking water from streams that have significant slop.
2. Lifting irrigation water from streams or raised irrigation channels.
3.Lifting drinking water from springs to settlements on higher ground.
Junkyard - Origin of Creativity p
Junkyard - Origin of Creativity
Oh. I love your projects, you are my teacher, many kisses hahahaha
Junkyard - Origin of Creativity water is also coming out of an open pipe wasting water even more
We could design a way in order to save that spill-over
For all those who don't understand. This is used when an unlimited supply of water is available above the pump. Like a river or pond etc. It is then pumped to higher ground over great distances. It's not high volume but makes up for that by constantly running without using an outside power source. Water is not wasted. It's simply put back into the ground where it belongs. Ideal usage is to pump to higher elevation to a holding tank. Great system.
Don't try to fix these people's ignorance. You're just wasting your time.
J Bouchard
Pak. Drama
you can "stage" this system using several pumps and water tanks....very slow but it's free!!
u r correct , there is no energy generating
This is a nice manufacture of an old idea, one of the old family farms in England in the 1800s used a cast iron version of this to get all the farm's water from a lower stream. It's totally free to run, the energy to lift the water comes from the water that is returned to the stream flow. While the flow may be slow, it's running 24/7 so if you over use in the daytime it can catch up in the night.
There really should be an outlet pipe for the water returning to the stream just so that it doesn't damage the foundations of the pump machine.
Use the outlet to store more water
For this to work the stream has to be above the pump, so you can't just return it from where you got it.
Use the outlet to flow water to your fish ponds.
😢
😢
Thanks, for a great demonstration of how water hammer works. It would be a nice tap water system by the creek.
The amount of water lifted by this device is less than input.
The potential energy of the incoming water plus the wastewater equals the potential energy of the outgoing water in heigh level.
Aqui no Brasil chamamos de: bomba carneiro.
Realmente funciona! Esta do vídeo está mais bonita do que funcional, o funcionamento é questionável pois a água sai corrente e não pulsativa.
Apesar dos pesares, parabéns pelo vídeo!
Eu gostei e ficou legal!
Congratulations!
sir i am calling from india, I made the system and saved 1000 rupi for electric everyday. thank you very much
OMG the comments are frustrating, not sure why people who's knuckles drag along the ground when they walk click on non cartoon's on youtube. This pump has been around for a long time and has worked very well for it's application, well done to the person who built this one, it was working beautifully
Oh let us all bow down to the superior one. Thank you gracing us with your presence.
The comments are frustrating for sure. Imagine thinking you can break Newtons physics and that free energy is actually a thing. You'd have to be so ignorant that you ignored grade 5 science class entirely
These used to quite common where I live. I think that some of them were used in series to reach higher. Not sure how that would work, so I might be wrong. The source was usually a river with a dam providing the water head to run the ram pump. There are remains of some of them still in existence, but not used any more.
To clarify- the "waste" water just goes in to the river below the dam, so it's not wasted. It's not "free" energy of course. The energy is provided by the sun which creates the clouds that provide the rain upstream. However, the sun still has millions of years left to continue supplying energy before it dies.
Да, действительно *БЕСПЛАТНЫЙ* водяной насос!
*;-)))*
Team Ram pump!!!!! Cool 😎 long story short! Nice valve! Or if you want to get all science spicey and attract some nerd adore 💕 Them you can explain. NICE VALVE with nice valve(s) control
Very good.useful to transfer water to overhead tank when electrical supply fails for long periods.
This is great I will try this thank you for sharing your ideas,new friend here from Cebu Philippines
I think this would be very helpful in aquaponics or hydroponic. No electricity needed.
Why not ? I think it is possible
It is possible but the spit out of water by the check valve it make your water supply or tank may drain..
Your video is very good quality. Great sound and picture. Thank you for sharing your experience, techniques, tips and especially your very compelling video. I wish you health and success offline. and soon create many great videos. I support you.
This is Very easily understandable unit after seen many videos
You know how much money you can save as a small scale farmer like this. Pair this with a few 12v pumps and some solar panels and there's virtually no limit to how large you can scale this
The reason this works is the drink bottle at the top of the pipe. As the water siphons from the 5gal jug it fills the pipe and pressurizes the bottle. As the water flows back out the bottom valve, the pressure in the bottle manages to push a small portion of the water through the top check valve. Eventually this will fill the hose going to the tank on the roof. It's limited to the height this would work; at some point the weight of the water going up the hose to the tank would exceed the pressure in the bottle and all the water would then flow out the "release" valve. This works, but it's not "free" energy. Stored potential energy in the water as it falls to a lower gravity state is what drives the system. An Archimedes' screw is far more energy efficient and can pump more volume.
As to the maximum altitude limitations problem where the weight of the water reaches a point where all the water goes to the release valve, I would say that I have a theory that might work. Lets say you want the water to go up like 4 times higher than the maximum altitude you can get it from a standard ordinary hose, I would say that using much thinner hose, like those 1/4" polyethylene white tube pipe hose commonly sold for Reverse Osmosis (RO) filters and its cartridges, those hoses are so thin going upwards would not render the same weight ratio than going upwards with one of those bulky fat hoses, therefore you should be able to get that water much higher with those 1/4" hoses.
an archimedes screw isn't "self" powered. That is it doesn't run on gravity. you need a prime mover to turn the screw.
3DPDK 6
3DPDK q.
amazing
can you make a list of all the parts that make up this item ???
Genial
Merci pour ton tuto
Tu es très astucieux et cela ne coute presque rien
Thanks for simplifying your video some dum dums don't know how to show their work
Very nice job because of your vlog tutorial I got some knowledge from you about that your vlog
Гениально МЛЯ !
Вылить 20л воды с высоты 1м
Чтобы поднять 200гр на высоту 3м
КПД -100%
Это просто шедевр идиотизма !
Единственный вариант использования - если рядом есть ручей/река с порогом. Хотя на таком ручье можно сделать водную мельницу)
Такие штуки ставят в ручей, там расход не важен. Поищите "гидротаранный насос".
@@streamdream-ru
Это ВСЕ знают !
ТЫ обрати внимание на название
"бесплатный НАСОС"
а УЖ потом пытайся умным показаться
There is no realistic height limit to this system. Merely use the exit hose to fill a tank about 10 feet above the height of the unit, then use the tank as the source for a second Ram Pump to lift it to a second tank 10feet up, & so on. Multiple pumps will bring usable water to many elevations.
I just watched this video cause i read a comment of someone saying the great pyramid of Gizah looks like a giant ram pump.
If somehow that's true you can get an idea of the scale it could had reached with thousands years old technology.
This will fill up your emergency tank and water your plants at the same time... Nice
+sam42762 thanks
But you should need a constant lower water supply to keep it running
Master and Servant because there's not creeks, lakes, rivers, etc literally everywhere that is not an arid desert?
Can j use g to fill my toilet up ?
Hi admin thank you very much for the idea you shared its great! If you dont mind can you give the measurement of the coupling ,elbow,other things ,..thank you
It is a water whip, hydraulic ram, water hammer ... It needs running water for its activity, preferably from a stream. Cannot be used in a well. The hydraulic ram can pump to a height of about 5-10 percent of the inlet water volume. We have been using it in Europe since the 18th century.
have several questions. 1- Can you tell what should be the ratio of the diameter of the outlet pipe to the inlet? 2-Which dimensions are important? I tried your design but it didn't work. Would you please tell me important tips? thanks
find more videos about how Ram Pump works
Gostei da engenharia Parabéns
Excellent video - good job at designing and making this pump - but PLEASE change the title to get rid of the clickbait "free energy" bit
Dude I like this subscribed I want to know all this parts name like the rest of us poor don't have Amazon lol nice job bro keep it up
多謝！
Nice 👍🏽project !!
Request you to list the names , and , sizes , respectively , of various items used in this project .
Thankyou !
It's called "Carneiro Hidráulico" (hydraulic ram) in Brazil. Used in farms.
en France est appelé pompe bélier :)
Diam la
In Germany it's called "hydraulischer Widder". An old System.
Excellent work!!!!
Could you please suggest on how to fix airlock problem in monoblock one HP pump....
It would be a great help. Thanks..
I once had and used a Water Ram Pump for my drinking and bathing water (filtered from a spring of course). I built a 2 foot Dam, and had the opening starting at 4in diameter down sized to 3/4in - 50 foot downstream for maximum back pressure which you need to make these work properly.
The only issue I had is freezing water during winter. I think I paid $85 for mine online.
O melhor projeto de bomba dgua sem motor que vi até agora
Pena q para o funcionamento dele a tbm muito desperdício de água com tanta água caindo pelo respiro !!!
Bernoulli's principle,,, there is an old dam in the Philippines built by Spaniards pumping water from river up to reservoir and still pumping to this date.old technology.....
The name of the dam
That make sense because the hydraulic ram pump was invented in Europe (England). 1772 . Source Wikipedia.
Explain how it works. Is the pressure enough to rise the water level to that much height?
Water hits the valve going out. That water, hitting the valve that closes, pushes that momentum up into the pressure tank which creates backpressure to "pump" the water. Still gonna cost about $40
Please, could you tell me, what maximum height can this pump lift water? Thank you
depends how much the volume is inside the first hammer chamber.. the more the higher..and the more pressure... but like this is should reach about 20 feet easy
It would be nice to have a part list. Thanks for sharing!
It's good idea though.. but, is there any way to avoid wastage of water which flows from bottom outlet... ?
how it works???
please explain me
Is there any specification in the length of the pipe pieces used
Nope. I mean yes but close counts.
Intake hose should be 15 feet or longer, he was cutting it close,, your outtake can be as long as you want,,,, as long as you're elevation is high enough on intake,,,, meaning he needed to move that jug of water higher to get any more height on his pump, ratio is about seven 1 to 7
I thought it would be around 10 cm to 15 cm...
Very cool design of a water hammer pump!!!
thank you
vastg of watr paglo
Why not a rubber ball in the valve rather than a metal swing valve ? Smoother & quieter operation ?
The drain is not working in turn to pump it up. How to do it? Does it have to do with the pressure of the incoming water? Does it have to do with the distance of each pipe? Do the two bars need to be the same height to work together?
thanks for , but , does that way give us efficiency more than power of grafty , this copmaring will be cleared by numpers as examples ... thank again
Nkngrszdtyghfufbir03hirhhhhhbBBbbbhhgdhfhdu8r8
Very innovative idea....
Are you for real? innovative?
can we get the list of materials please?
ถ้าเพิ่มขนาดถังส่งน้ำ
ปลายทางของน้ำจะออกแรงกว่านี้ไหมครับ
This method can be use for still water? Means that the water doesn't have any flow.
This can be used as the watering system for plants.
Survival time.
It's a hydraulics ram pump I did it in my college project
Does this pump works
@@shankar_dey yes it does
it work becouse the tank is high gravity make the water flow,,even no ram pump only hose come from the tank it flow the water
Excelente, gracias por el aporte!! Very good !
Laramgan agama
Good idea using NRV , this is usable some locations. This idea not able to use in some ground water usage location
Muito Bom ! Aqui na Bahia, Brasil é conhecido como carneiro hidraulico.
The water wouldn’t be wasted if you were taking water from a stream or spring
Ya
The water cohesively flow from the tank with gravitional pull.
It's look great , but i did not understand
@Square Sushi
Can we use this principle for first floor when there is a low supply of water . In our house four portions are there. For our house we are facing the water problem.
Is There a reason why u keep the pipe behind "water in" Open ? Would thought The pressure would be better for "water out" without the water leaking out behind..
Bonjour, pouvez vous me dire ce qu'il faut acheter pour fabriquer la même pompe que vous montrez svp
This music feels like those in ragnarok games in 90's
Ved Raut .
Ved Raut Main instrument sounds like prontera's theme song
explain the principle of your setup
Its not free energy but uses the energy in the water and wastes lots of water.
what we can do is collect the wasted water at the bottom and reuse it
It's meant to be placed in a running river. Doesn't waste water that way.
Una consulta.. Hasta cuanto metros de altura se podra bombear con esta tecnica.. Gracias..
So the ram pump has to be placed lower than the source? I'm looking for a way to use a ram pump to draw water from a lake
the first one who made it is : Joseph-Michel Montgolfier
at 1782 :p
I think the first one who made this : Al-Jazarī was a Muslim inventor in 1100
هذه العمليه تفسر سقي المزروعات في الجنائن المعلقه في بابل في عصر نبوخذ نصر وبدون مضخات كهربائيه
Nie ma czegoś takiego jak darmowa energia!!!!!
I made exactly the same assembly, with the same components, but I couldn't get the pump to work. The swing check valve on the left stays either open or closed, but doesn't perform the random movement where it rejects a little water and closes/reopens by itself. I don't know what to change to make it work, it's exactly the same type of equipment I bought, and I fitted it the same way you did. Does anyone have any ideas?
Great....video not really consumpt of time...I respect it
I used to see this on my uncle's farm.
Alexandre Silva did your experiment successed?
How come there isn't any argument about the word "free energy" here? Lol.
Ugh! Thier never should be an argument about most of the devices that make free energy because you always need a human! Those negative lazy arses just waste people's time complaining and not about anything worth while!
Every thing ok bro...
But last 2 min I can't understand
Water is forced up by the pressure in the bottle & the valve closing on & off
Hariharan Sudhan como cortar fiambres con maquina electrica
I have a friend in Lisbon with a well, but no power. Would this setup work, if we could use a small solar Fishpond Sprinkler Pump to take water from the well and push it through the Ram? There is not a lot of “push” from a little pump…but would the Ram would provide the “push necessary ??
Das Prinzip haben bereits in der Vergangenheit die Römer angewendet. Eine super Lösung! 😁
There is no free energy!
It is driven by kinetic energy of water .... From the efficiency point of view, it is highly inefficient because it wastes immensely more water than it can pump! Its great limitation is that it depends on the existence of running water and with unevenness ....
But it can be a small-scale solution, provided you meet the requirements ...
My place has no electricity and a spring. Can we use this pump?
If it's built at the source of the water, the waste valve water returns to the source... fucking idiot
Too bad that this one way valve on the left wasting half of the water, there should be seom sort of overflow, or pipe.
If you do thath the pressure will get lost so it's not good to do it as we say in Hindi Kuch pane keleye kuch Kona padtha hain means to get something we need to lose someting it's like that
damn, I can't figure out how to apply this to my life.
me too
It's like that you eat and shit. How can you shit? you need a pressure to push shit out.ok. It is so simple.
Nice and simple it seems. I still don't understand how the water comes up and out of the container before going down into the ram pump..
So the water that comes out from the other check valve will become a waste?
Its like hydroneumatic pump
Reste plus qu’à qu’a mettre une turbine et faire descendre l’eau la nuit lorsque les panneaux photovoltaïques ne donnent plus rien…
Chez moi c fait, j'ai 1500watt
Simplesmente genial. 👏👏👏👏👏
thank you for this instructional video. excellent!
Glad you enjoyed it!
Apakah gelon yg berisi air harus di tempat yg tinggi,klo gelonnya sejajar dgn alat yg kita buat,apakah airnya bisa keluar
I don't watch the Video yet, but im sure it's NOT FREE ENERGY.
Update: i was right.
Was für ein Unsinn... 😂😂😂 und wieder, Energie aus dem Nichts 🙈
Gucki Berlin yeah friend the funniest from this when you make it at home and nothing happen 😆😆😆😆
Desperdicia más que lo que sube
Puede poner otro depósito y ya no tira ese agua,almenos la sube.
No tienes idea de lo que es una bomba se ariete. Es entendiste gu opinión...
Se desperdicia 70 por ciento de agua ,
@@lorenafernandez5444 que legal como funciona?
How can you improve it to where it's not wasting water coming out of the bottom of the pump where that water can return to an upper level or the tank or ???
I like this kind of pump, thanks for sharing
Faça uma visita ao canal 👍
что это? 0_о
Johann Bach хз) тоже в рекомендованные попало?)
чувак пустил воду с бочка крыши и назвал это бесплатным водяным насосом 😁 тоже хз че
Maruf Gafurov ну зато красиво оформил)))
Johann Bach نظ. ر
ح او. وممكك2
if we are using this to fill up reserve tank and put float valve at the end of it, then we will need to trigger the ram pump to run again in order to 'restart' them, right?
Water wasting, but functional, good work!
This tutorial is reaaly helpful, even idiots would understand this. Thanks fo the work.
Normally the water will flow down coz the drum is elevated.what if the the drum is lower than the pipe.can the water still manage to go upward
Can we not to waste that water by adding something to the pumping valve?
You're doing a fantastic job! Just a quick off-topic question: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How can I transfer them to Binance?
Как удивительно вакуум и давление имеют столь большое значение в физике а значит на практике, столько разных открытий.