Water Beads That Slide Off! Dr Beasley’s Bead Hero!
Вставка
- Опубліковано 3 лип 2024
- Water beads that slide off! Dr Beasley’s Bead Hero! In this video, I review the new Dr Beasley’s Bead Hero, a hydrophobic ceramic spray engineered to add robust water beading properties and extreme gloss with spray-and-wipe ease. It’s formulated to produce water beads that quickly slide off the finish, easily taking dirt with them and reducing the chance of water spots.
✅ Click here to purchase on Amazon: amzn.to/3EtpLT8
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
On the official Dr Beasley’s website:
Bead Hero: bit.ly/44pbj93
Matte Bead Hero: bit.ly/45NCbAU
On Car Supplies Warehouse:
Dr Beasley’s Bead Hero: bit.ly/3KdJ4Ty
Drying towel: bit.ly/3DEHK8x
Microfiber towel: bit.ly/44RNOGK
On Amazon USA:
Dr Beasley's Bead Hero: amzn.to/3EtpLT8
Matte Bead Hero: amzn.to/3LggVfo
🇨🇦 For people in Canada:
Dr Beasley’s Bead Hero: bit.ly/44GmFXo
Dr Beasley’s Matte Bead Hero: bit.ly/46ABsUD
Drying towel: bit.ly/3fWQzlV
Microfiber towel: amzn.to/47g5L3p
🇬🇧 For people in the UK and Europe:
Dr Beasley's Bead Hero (in2Detailing): bit.ly/3PwzwGd
Bead Hero (Motor Geek): bit.ly/3q7gHQa
🇦🇺For people in Australia: bit.ly/3qa22DR
Visit the official Dr Beasley’s website for more details: www.drbeasleys.com/
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Dr Beasley’s Bead Hero key features:
- Produces fast-sliding water beads
- Creates a slick, ultra-reflective finish
- Wipes off effortlessly with no streaks
- Has durable hydrophobic properties
- Protects against UV rays
- Can be applied to most exterior surfaces: paint, wheels, glass, plastic trim, lights, PPF and vinyl wraps.
Notes:
Don’t overapply! 2 sprays on large panels and 1 spray on smaller panels is enough.
Wait 2 hours after application before exposure to water or rain. Allow to cure overnight for best results.
Don’t wash the car for 1-2 weeks after the application.
Full disclosure: This is a sponsored video. However, I made sure that the opinions expressed in my video are my own and the company had no influence on my content.
Watch more of my videos below:
✅ Detailing a matte car with Dr Beasley’s products: • How to fully detail a ...
✅ 2023 Car Detailing Products Awards: youtu.be/
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on UA-cam, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my UA-cam videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#DrBeasleys #BeadHero #CeramicProtection #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing - Авто та транспорт
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
On the official Dr Beasley’s website:
Bead Hero: bit.ly/44pbj93
Matte Bead Hero: bit.ly/45NCbAU
On Car Supplies Warehouse:
Dr Beasley’s Bead Hero: bit.ly/3KdJ4Ty
Drying towel: bit.ly/3DEHK8x
Microfiber towel: bit.ly/44RNOGK
On Amazon USA:
Dr Beasley's Bead Hero: amzn.to/3EtpLT8
Matte Bead Hero: amzn.to/3LggVfo
🇨🇦 For people in Canada:
Dr Beasley’s Bead Hero: bit.ly/44GmFXo
Dr Beasley’s Matte Bead Hero: bit.ly/46ABsUD
Drying towel: bit.ly/3fWQzlV
Microfiber towel: amzn.to/47g5L3p
🇬🇧 For people in the UK and Europe:
Dr Beasley's Bead Hero (in2Detailing): bit.ly/3PwzwGd
Bead Hero (Motor Geek): bit.ly/3q7gHQa
🇦🇺For people in Australia: bit.ly/3qa22DR
Every time you post a video about new detail products, my debit account goes down! 🤣🤪😎
Same thing here bro
You are not alone 😂
😁👍🏻
@@claudepaille4913same here broo lol
Here in Australia we don't have some of the brands Pan uses....so I'm saving money 🤣🤣🤣
This ceramic coating also works great on the inside glass - including the inside of the windshield for streak-free and glare-free perfect clarity. The finishing touch for any detail job
-Mike Phillips
Is it safe on tinted windows on the inside?
@@brianengesser5039 - I’d say “yes” - hasn’t harmed mine or my wife Stacy’s tinting.
I don’t have the luxury to let this product cure after a wash. My garage is a small one-car garage, will this product cure properly outside in the sun in this hot summer heat?
@@xsoleprophetx I have this same question, mine is daily driver and my garage is set up as a shop so no parking, but I can go down to the local self-wash and do it under canopy but do not want to sit there for 2 or 3 hours lol. after I would dry and apply product, I typically finish my detail and am on the road withing 45 min. would this be enough time?
Officially they state the car is ready to be driven even in the rain after 2 hours. Ideally you would let it sit overnight when possible.
I finally got to use this today & must say, it’s truly is pretty amazing! Lol. My paint is black with flakes in it & its leaves a great shine/gloss finish along with being very slick. Will be my go to.
I love the versatility of this product, which is what I look for. Easy to apply, can be used on multiple surfaces, and great hydrophobic properties. This will be a great topper for my ceramic coating, going into the winter months.
Couldn't agree more!
Pan the Man!! Cheers 🍻 from Massachusetts. Endless knowledge on this channel. Thank u!!
Thanks for watching!
Great video as always Mr.Pan Thank you very much
Thanks Nasser!
Thanks Pan. This looks like sweet product. The gloss was insane.
Thanks for watching Steve!
It's kid of frustrating that so many chemicals need a garage or shade, where I live, i have neither. I'd love it if the chemists made products that can be used year round and in all elements.
Check out Dr.Beasley’s Nano LS-10! Spray on multi surface coating that is SUN SAFE! Although.. do note that LS-10 is a sheeting coating, not beading.
I am convinced. Order placed! Thank you Pan!
Enjoy! Let me know how you like it when you test it.
@@PanTheOrganizer But of course.
I use as a drying agent after each wash. Works flawlessly and the gloss is insane. For now, its the best product in its class. Ive tried them all.
Thanks for sharing your experience!
So this can be used as a drying aid?
They recommend you do a quick drying of your car with a blower, or with a drying towel, and then use this as a final quick detailer on "almost dry" paint to remove residual water (as there's always a bit of water left) and boost gloss/slickness if you want the best durability and performance from it.
this is still good to use as a drying agent on a vehicle that is already coated.? @@PanTheOrganizer
Have had this a few months here in the UK after watching the apex video that Brian did, on that video it was put across that you had to apply the product heavy and most of the comments on that video were people who were put off the product by the amount you had to apply but I bought some anyway and i have to say I love it, good to see you show that you don't need to use half a bottle
Yeah I spoke with the team at Dr Beasley's and it was a new product at the time of Brian's video, and they realized that a heavy application wasn't the way to go. Potential streaking and wasting product.
So now they have readjusted and less is more. I used way less than one ounce of product, and just one or two light mists for small panels, and 2-3 mists for larger panels like the hood is all you need. Wipes on easy, buffs off easy. :)
I mean those water beads are just insane😱. What an truly awesome product! Great video Pan, stellar work👍🏻.
Thanks Konsta! You would like this!
@@PanTheOrganizer For sure, I need to order this at some point and test it out👍🏻
Pan! Thanks for showing us the "convenience" of this product!
You are so welcome!
I think this product will become a classic
Thank you
Thanks for watching!
Thanks for a great explanation on both the benefits and drawbacks backs of water beading. We all know water beading looks cool, but if there’s minerals (hard water spots), or chemical contamination in the water, (common) then water beading can lead to Type II Water Spots. The chemistry behind this spray-on SiO2 ceramic coating is more focused on enabling the water to flee the surface to help avoid water spots. Excellent presentation Pan, you did a stellar job of explaining the benefits and features for this product plus sharing how fast and easy it is to use. 👌
-Mike Phillips
Thanks Mike! When a legend of the detailing world agrees with me, it's a good day. :)
I'm interested in your continuing review of this product. Really hope you do updates at intervals to see how it holds up. Great video as always!
Thanks!
Thank for the kind words, Pan! We'll just have to wait for the 2024 Detailing Product Awards to see how Bead Hero does If anyone has any questions about Bead Hero or any other Dr. Beasley's-related topics, drop 'em below and we'll answer. You might even get a response from the 🐐Mike Phillips himself!
Do you make a product that doesn't require perfect weather elements or a garage? Thanks.
Will this be coming to the UK?
@@decker0373 Of course we do! People apply products like our Formula 1201 and Nano LS-10 outside in less-than-ideal conditions all the time. We've seen people apply Bead Hero outside and have great results as well. We don't necessarily recommend it, but that doesn't mean you can't!
Hello, will the Dr. Beasley beads mask the actual performance, if used as a topper, for a ceramic coating?
@@GavSloanyes! I believe Motorgeek will be willing it shorty if they are not already!
I’m ordering right now thank you pan
Enjoy Kenneth!
This stuff looks amazing just picked it up today can’t wait to do a decon wash this weekend and apply.
Have fun!
That is some Ceramic coating!!! Thank you for the excellent demonstration pan.
This is a product that I'm going to be reaching for in the future. 🙂 🇨🇦
You are so welcome!
Great, i was waiting for this vidéo 👍😁
Hope you enjoyed it!
@@PanTheOrganizer as always, i enjoy all of them
Thanks!
Thanks for helping to support my channel and thanks for watching!
I’ll give it a try. I’ve been loving technicians choice spray lately. That feels like silk 😊
Oh you'll like this even more. :)
@@PanTheOrganizer tried this product yesterday. Went on pretty easy. Smell was not pleasant. Smelled like paint to me. Haven’t seen the beads yet since it hasn’t rained. Ty.
Since it has been raining for 40 days and 40 nights, I can say, the beads are awesome!! so tight, all different sizes, it's really amazing :)
Pan,
Superb video as always.
I currently use the Bead maker Dream maker mix as my topper.
Definitely outstanding.
I decided to give Bead Hero a try.
So today, after the detail wash and bigboi dry, I topped it with Bead Hero.
Super easy to use just like Bead maker mix. It’s still curing but it’s looking great.
I’m going to give Bead Hero the edge so far. The gloss, pop, and shine are noticeably ‘richer’.
I’m thinking it will look even better after it cures overnight.
Thanks again for what you do.
All the best,
Chris, Tampa, FL
Thanks for sharing Chris!
So you saying bead hero seems to be and look better then p&s?
Sweet!
Another amazing product, thanks again Pan. It's a bit expensive out here in Japan, hoping they get an official retailer here so I can try it one day. Or maybe I'll pick up a bottle next time I'm over in the US on business.
Thanks for watching!
Thank you
You're welcome
Hope your doing well Pan!! Have to give this a try.
I’m doing good bud, and I hope you are having a great weekend.
Hi Pan, I'm pleased that you have included a link for your Australian subscribers, that never happens, and I would love to see it all the time.
For your info, I opened up the link and the supplier 'Carcareproducts' here in Oz dont have the Beasleys Bead Hero, they only carry the Beasley Matte products which is rather disappointing.
Yeah sourcing these in different countries is complex at the moment. For the links, I usually focus on my most represented countries on my channel: USA, Canada, UK and France.
I have a limited amount of words to put in the video description so doing more countries is simply impossible. Also, it takes a lot of time to research and put links. Rarely do people do it for more than one country. I do it for four hehe. I try my best but I’m only human.
Thanks for watching!
Another great Dr Beasley product. They are on a roll! Durability has been a little disappointing for us & our customers
What is the durability like in your conditions?
Another great video!! One coat is good? Seems so. Thanks again!!!
One and done!
Thanks!
Awesome product and of course awesome video as usual, best spray Ceramic to date, however I have not had much luck on polished wheels, doesn't seem to hold up to these German brake pads! On the glass and paint though wow simply great.
Most spray products don’t last super long on wheels as that’s a harsh environment. Even wheel coatings don’t often go passed one year.
Thanks Pan - Yes, need to invest in ceramic pads next go around for my Porsche. Cheers. @@PanTheOrganizer
As usual, another informative video. Good stuff. Question: my SQ8 has professionally applied Carpro CQuartz. Once a year I have my detailer refresh the coating using CarPro Gliss. Would continue with the Gliss or try Bead Hero?
Gliss is a completely different type of product. It’s a true glass bottle top coat with one year durability mainly used to help prevent water spots from the coating underneath.
Bead Hero is a maintenance product you would use more often after say a maintenance wash.
Great presentation as always, I actually watched Bryan‘s from Apex detailing presentation. first, he was showcasing this product with Director himself, and I followed his instructions where Director flooded the test panel with the product so I did the same on my vehicle,and ended up using 1/3 of the bottle right after first use but it looks like I have to knock it down a few notches. Luckily I watched your videos as well.
Time to update my application process.
Thanks, Pan.
Yeah that APEX video was filmed way before mine, and Dr Beasley's readjusted their own method with the product. My video shows the new correct way of applying, which uses very little product.
@@PanTheOrganizer awesome thank you, I’m already on my second bottle but I’m to blame as well for not reading instructions.
Lessons were learned.... with Bead Hero less is more!
Pan you are my Bead Hero 👍👍👍🙂🙂
😂👍🏻
AWEsome, is this on Amazon... Thanx again for invading my Wallet - Lol😂😂😂😂
Hehe yes it’s on Amazon, links in the description under the video.
And Pan makes me spend another 35 bucks. Lol. Love Pan, I never miss a show. Even if it’s something I’m not really needed to know.
Thanks for the continued you show to me and my channel Steve! I’m blessed with an awesome audience!
Pan - love the video about care car for upcoming winter months - the undercarriage pressure washer will be a game changer.
Any updated product reviews or suggestions for protecting in harsh winter conditions? In New England we have sand/salt mixtures to deal with - yikes!
ua-cam.com/video/0zBK5Kxorko/v-deo.htmlsi=uwCf1fBdHYM1-8qu
Those are some nice marble size drops.
Hi Pan, Thanks for another great video. Do you know how this compares to DIY Detail Ceramic Gloss?
I need more time to test Ceramic Gloss, but both are very good. The sheeting on the Dr Beasley's is for sure superior and quicker. For those who want a product that sheds water quickly, the Dr Beasley's is as good as it gets for a spray.
Hello Pan;
Great video. I was wondering if you could do a review on some paste and liquid waxes for your next series or videos. I would really like to see you test some of Xtreme Solutions' paste and liquid waxes. I don't see many channels doing reviews on their products. They make a product called Titanium Double Coat Tin Wax and their Magnum 357 liquid wax and other great products!
Thank you!
It’s a true hero 😂
Hello Pan, merci pour cette belle decouverte , une marque qui comporte la mention docteur donne du sérieux. Le résultat est bluffant, penses-tu qu'il existe un équivalent disponible en France, comme Hendlex, Alchimy...?
Pas à ma connaissance
I appreciate the tips and details about the product!
Quick question, does steam washing affect the existing ceramic coating?
It might not hurt the coating but repeated cleaning with high heat and moisture is going to ADD longevity to any coating.
-Mike Phillips
@@DrBeasleys that what I was thinking about! Thank you.
A wonderful new product and thorough review as always Pan. I've searched through several comments, and I don't believe anyone has asked, so I wanted to take the opportunity:
How do you think this compares to the BeadMaker with DreamMaker fusion?
Yes I did answer that question hehe. ;)
Bead Maker and Dream Maker is more of a shirt term quick detailer style to boost gloss and slickness. Bead Hero is a longer term ceramic based protection that has superior hydrophobics and an insane sheeting rate.
Can you please do a review of the full Dr Beasleys range please! 🙏
If I get enough viewer requests for it, I'll look into it for sure! The products I have tested from them so far are really good.
I would love to try this, but I have so much Avalon King Armor Sheild Lite left that it wouldn't make sense to buy another ceramic sealant right now. I'm not liking the Armor Shield as much as I used to after noticing dark steaks dripping down from my door handles after going a couple weeks without a wash. That doesn't happen when I don't use the Armor Shield Lite.
OK thanks Pan. As you will already know Dr Beasleys Polish looks really good as when using it it lays down a base layer for there sealants. Thing is its really expensive over her in UK. Would be good to see what you think of it all doing a full paint correction and Finish! Have a good Christmas! Peace out!
Merry Xmas to you too!
Wow! This looks amazing on the car and I definitely have to try it. Even the tires and wheels were glossy! Is that because of the Dr. Beasley’s or you used something else? I literally said wow! when seeing that shine! 👍🏽
Thanks for watching! I applied the Dr Beasley's to the wheels yes. On the tires, I used this: bit.ly/465j9WU
@@PanTheOrganizer Ahhhhh okay! The Darkside! I guess I’ll order that as well because that was the perfect overall shine and gloss! Again, wow! 😁 Thanks so much!
😎👍🏻
my daily driver sits outside 24/7 here in Vegas and I wonder how often this can be applied, would you say every 3 to 4 months should be sufficient, also what is the recommended shelf life before product degrades. thanks for all your hard work in bringing us great product reviews and the depth in which you cover them.
Thanks. You can apply this as often as you want. Certainly at least once every other month if you want max gloss and slickness.
Detailing chemicals are typically good for 1-2 years if kept in stable condition and never frozen.
For coatings in glass bottles, once opened, it’s hard to know exactly how long they can last as the curing starts. Most say 1-2 months.
@@PanTheOrganizer great, thank you, I always wondered the shelf life differences between si02 coatings vs si02 toppers/detail sprays such as this product and why they are different (shelf life that is).
Does it work well on the windshield compared to Rain-X? I'm about to give up on Rain-X. Not what it used to be.
Another great overview. Pan, can you do another video but emphasizing the application. I watched the Apex detail video with the Beasley rep and the rep applied A LOT on the test panel. The rep did the same as an initial application of Bead Maker. In your application Pan you emphasizes juat 1 or 2 sprays per panel to avoid streaks .. confused my noggin is. Thanks for your efforts as always😊
I saw that video too and asked Dr Beasley’s and they said they have since readjusted the instructions, so my video is the most accurate. Less is more. Exactly how I showed it is the correct way.
..... the Beasley rep has now adjusted his presentation LOL. As I used the product over the summer and received more feedback from our network of detailers who had early access to the product we learned quite a bit of intel we were then able to share with everyone.
Bead hero vs turtle wax seal n shine.
Which do you prefer?
Another great video, Pan. This product looks amazing. Do you know if it is available in Canada? Unfortunately the postage from the US costs more than the product.
Yes it’s available in Canada. I put links to it in the description under the video like for all my videos. ;)
Like to see you and test glare glass plexin
Seems like a great product! Couple of questions. Is it “stackable”? As in if continued use, does it adds layers of protection? Also, if I was to use this product & then my topper (Extreme Solutions Topper) would that diminish ether product? I’m assuming it would not, but figured I would ask.
Wondering this also. Since it lasts so long are we using Bead Hero after every wash? Or maybe just once in awhile and then using Topper on our regular washes?
@@realdopewater Exactly. Maybe just use the topper as a “maintenance” over the Bead Hero. Would be expensive to use it after every wash (depending of course). But I’m definitely curious! Lol
Hey Pam how are you ? Question do you have to discard the towel like a ceramic coating or can it be reused? When using this product.
You can wash the towel after use, and reuse it.
Hi pan great video
Think I can see me trying this product not sure when yet as iv still got some the last coat 2.0 witch I find vary good think I got around 5 to 6 months got the TLC because of you pan yes pan I have bought product from watch you 👍👍.
The last video was interesting with the Google reviews the bloke getting you sorted on Google
Would love to shake your hand an say thank you .
Say a big hello to you family pan as all ways all the best to you
Stewart
Thanks Stewart! Have a great weekend!
@@PanTheOrganizer Hi pan you have a great weekend to iv got my son this weekend he's age 11.
Pan I like to take this opportunity
to say sorry if I do arks a silly question or arks a second time I'm 54 on Monday an I was bron 2 months early so I don't always get things that easy. An I find some things hard to understand at time .
All the best pan say hello tour family pan
Stewart 👍👍
No worries Stewart. It’s always a pleasure to help you. You have always supported my channel. 😁👍🏻
Pan sir please make a course for car detailers I'm from India 🇮🇳 and we all love you 💐
With over 900 videos on my channel, you’ll always find the tutorials that you need.
Also, I highly recommend that you watch my Detailing 101 series for beginners, where I explain different steps like iron removers, clay bar, polishing, protection, etc. It's super simple once you understand the basics, and your car will look and feel 100x better!
Part 1: how to properly wash your car: ua-cam.com/video/7Koj5j2Es5U/v-deo.html
Part 2: how to clean wheels and tires: ua-cam.com/video/omwcNcSYcS8/v-deo.html
Part 3: chemical decontamination (iron and tar removal): ua-cam.com/video/W_cyHz3XssU/v-deo.html
Part 4: clay bar: ua-cam.com/video/XB8UaTCXuLg/v-deo.html
Part 5: machine polishing (paint correction): ua-cam.com/video/ustTEVGMOTI/v-deo.html
Part 6A: how to wax your car ua-cam.com/video/KZjiPcsPBrA/v-deo.html
Part 6B: how to apply a ceramic coating: ua-cam.com/video/sqQYVjxFqK0/v-deo.html
Part 7: Differences between waxes, paint sealants and coatings: ua-cam.com/video/4ejfPHan3k4/v-deo.html
Part 8: How to clean your car’s interior like a pro: ua-cam.com/video/Xx_lHXHYpLo/v-deo.html
Hi Pan. Great video as usual. Question: how would you compare this to Gyeon CanCoat EVO? Thanks
CanCoat EVO is a heavier duty spray coating and will likely last longer. It serves more as a base protection for those who don’t want to apply a fulk blown coating from a glass bottle.
Bead Hero is used more as a maintenance topper. Has superior sheeting properties.
Thanks so much!
How does this compare to the P&S bead maker/dream maker combo? Does it serve a different purpose? Thanks for the great videos!
Bead Maker and Dream Maker is more of a shirt term quick detailer style to boost gloss and slickness. Bead Hero is a longer term ceramic based protection that has superior hydrophobics and an insane sheeting rate.
Have you tried spraying it on a microfiber tp apply it or definitely best sprayed directly on the surface?
Dr.Beasley's recommends spraying on the surface.
Pan, I currently use TW Hybrid Solutions ceramic spray coating and love it. I also use the Graphene flex spray wax as a drying aide. What’s your personal opinion on how the Bead Hero stands up to the TW Ceramic spray? I’m always looking for something that lasts longer.
I wouldn't use the Flex Wax as a drying aid for regular weekly washes, it's overkill and could lead to streaking if used too often. Keep in mind Flex Wax is meant to be used as the base layer of protection, as it's super long lasting (actually lasts more in my tests than Ceramic Spray Coating).
Bead Hero isn't meant to be used as the long lasting base layer of protection. It's meant for for maintenance of coated vehicles in my opinion. Where it excels is in the gloss, slickness and most importantly its ability to shed and sheet water quicker than most toppers. It will likely not last as long as Flex Wax and the CSC which are different types of products. So I wouldn't compare them to Bead Hero.
Thanks for your feedback. Your videos have helped me make some wise choices in detailing products. To clarify, I only use the Flex Wax as a drying aide about once every few washes or when I notice the beading slacking off. I did use the flex wax as a base layer on my daughter’s car and it was very hard and frustrating to get off. It was very hot and humid even though I was in a garage. I wonder if that could have contributed to that. I properly prepped the car as directed.
Welcome to my channel. You discovered one of the biggest car detailing channels on UA-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Which solution has protection and gloss that you can put on your ceramic coating
This is a great topper for a ceramic coating.
Bonsoir
Did you do the tires as well? Nice shine on those.
No. I used CarPro DarkSide on the tires. A paint coating isn’t meant to be used as a tire dressing.
Pan, how would you rate the gloss enhancement with this product?
Pretty good. But keep in mind spray toppers are only icing on the cake. The biggest improvement in measurable gloss units is always by paint correction first. The protection applied afterwards is the icing.
At 5:47 you'll get the lowdown on ANY hydrophobic topper
Hi Pan.. picking your brain on your early thoughts re: Hero vs Avallonking Armor Shield Lite. Seem like AK has fallen off the radar a bit? Or perhaps the quality has simply moved off the charts. Whatever... your initial impressions greatly appreciated sir!
Bead Hero has much better hydrophobics compared to Lite, especially water sheeting. Bead Hero also has better gloss and slickness. Long term testing will allow me to see how it does in terms of durability, still to new to know.
AvalonKing haven't really released a new product in over a year, so other companies are working hard to develop new products and push innovation. AK's coating has been released over 4 years ago at this point, and Lite was launched in 2022. Many brands have surpassed them in terms of performance at this point, which is normal, hence why they didn't make the top three in my 2023 awards for best consumer grade coating of the year. Hopefully the brand is working on updated formulas or new products to stay competitive. Time will tell!
Go 1 Million Subscribers @PanTheOrganizer. Your contents are so informative and fun to watch
Thanks for your support!! 😁👍🏻
Thanks Pan!
Quick question: what size Marolex sprayer should I get as an apartment dweller, with a Honda Accord?(No hose using ONR.
In your case, for that size car and the fact you will be using a rinseless wash in the sprayer, I would recommend this: bit.ly/3ZaXKJn
Wonder if I could apply this on my MacBook Air which is a fingerprint magnet 🤔
Pan, I think you have used Gyeon Can Coat. How would you compare this product with the Can Coat?
I wouldn’t compare both products. CanCoat EVO is a spray coating that has the longest durability and chemical resistance from most sprays out there. But it’s also double the price of the Dr Beasley’s.
What’s your pick between this and turtle wax hybrid solution spray ceramic
I need more time to test Bead Hero long term, but it’s certainly slicker and hydrophobics are on another level, especially the water sheeting. It’s ine of the best and quickest water shedding products I have tested.
Could you do a review on sud factory products or if you have a video on it already could you put a link
If I get enough viewer requests for a review of their lineup, I will look into it for sure.
Wow Pan👍. What soa would you recommend for Matte paint on a Mercedes SUV?
Funny you should ask, I made two full videos with matte Mercedes vehicles. I guess you missed them? Here goes:
ua-cam.com/video/eU8zg1lXvXY/v-deo.htmlsi=PJgV6vkhXaicx_cR
ua-cam.com/video/5RocSxJQmzI/v-deo.htmlsi=tGWWa3hpkwi6ng-U
You know I usually have all angles covered with almost 1000 videos on my channel so far, and new ones added twice weekly.;)
Enjoy!
Hey Pan! Thank you for uploading. Would this work well on my glass shower doors? Or would a glass/windshield sealant do a better job you think? Wanting to make it easier to clean shower and less often. Thanks
Bead Hero can be applied over glass, however it may not be as durable as it would be on paint. A glass specific sealant or coating will last longer on a glass surface, but yes Bead Hero could work too. I made a video on glass showers here: ua-cam.com/video/hYVfR_3ssWo/v-deo.htmlsi=G3A3WtbP-i5m-j2K
Hi. Big fan Pan. If Bead Hero and Flow X went head to head... Winner? And why. Thx.
Still too early to tell but it would be very close. Both are hyper slick, easy to apply, but the Bead Hero for sure has faster water sheeting. You can’t go wrong regardless of which one you pick.
What the difference between the two products
Between which two products?
Can this be applied on a regular basis? (Following the same wash/decon/prep process each time?)
Yes! I use it every time I wash my car. I've made it part of my drying process.
Hey pan you have anything on how to get scratches or marks off your dash I think I have a Leather or some kinds of soft foam dash nit sure what kind of material I have but had my tint done on windshield and whatever tool they use for that scratch my dash so want to know what can be done please
No unfortunately, as I don't do leather repair. You'd have to look at leather specialist channels like Colourlock or Geist Leather Care. They have many tutorials on leather repair.
How does it compare to pns bead maker
I wouldn't compare both. Bead Maker is just a regular paint sealant that doesn't last that long (3-4 weeks at best). Bead Hero is a ceramic spray coating that will last longer, and for sure has much better hydrophobic properties, especially its ability to quickly sheet water.
Where Bead Maker excels is in gloss and slickness, and both are pretty close in that category.
Hey PTO, what about a comparison to the Turtle Wax Hybrid Ceramic Spray Coating? your thoughts?
I wouldn’t compare those. The TW is more of a long lasting base layer of protection. The Bead Hero is used more regularly as a topper. Not the same thing.
What about Matte paint is it safe ?
My answer came at the end of the vidéo Thx
Hehe I was going to reply that I answered that in the video. ;)
Just received my gallon size of bead hero. Pan, do you know the approximate durability of bead hero as a topper on a ceramic coating?
There's no real way of testing durability of toppers, as you have a long lasting protection underneath... So how would you know if you're seeing the topper's performance or the base protection's performance? And at one point, there's a limit to overthinking the moment and trying to figure out durability of everything, as durability also varies greatly for many reasons including conditions and weather and mileage. No two cars go through exactly the same conditions.
So the best you can do is see what durability claim the brand says for a product, and apply a bit more frequently. For example, if a brand claims 6 months durability for a topper, I would reapply once every 3-4 months to make sure I'm getting optimal performance. Especially for a spray product, it only takes a few minutes to apply.
Is this suitable for environments where you have a lot of dusting? I've tried several toppers sealants, and they all seem to attract dust.
I don't have dust issues where I live, so we'll have to see what my viewers have to say for those with issues like yours.
can you try and tell what is the different between beads hero and paint hear or do you use both or you just one not the other? thanks in advance
Paint Hero = Friction Product. It's a drying lubricant. Spray on a towel, then put towel on mostly dry paint to touch up that last drip.
Bead Hero = Gloss and Crazy Water Action. Finish with Bead Hero.
Hey Pan, will this product work with the clay & seal method you mentioned in your future of automotive clay video?
I don’t have an answer to that.
hey Pan, can I use a snow foam in a foam cannon to act as a lubricate when I use my clay mitt?
Yes
How long will it last on the vehicule before another application is required? Love your posts Pan !!!!!!!
Always remember - how long ANYTHING lasts always comes Down to how you touch the finish. Wash a car with a brick and nothing is going to last long. Wash a ceramic coated car gently, (like you should), and you give any brand of coating the best chance to last long and perform long.
-Mike Phillips
@@DrBeasleysyou still didn’t answer the simple question
@@DrBeasleys this is a summer car (Volkswagen EOS) covered in a heated garage over the winter, washed once or twice a week with a low PH soap, dried with Chamois after (no bricks will touch the car lol) The simplicity of the application of your product makes it quite interesting the durability will be the seller, 1 month, 3 months, 6 months ??????
@@waynerryan Under the conditions you're describing, you could easily see a year of durability with Bead Hero.
@@DrBeasleys thank you sir!!!!!!!
Kind regards. I have not been able to find any of your videos on which are the best orbital and rotary polishers according to your experience with them in your detailing. Do you have any videos where you talk about your favorite polishing machines? greetings 👋
I don't use rotary that much, so I have no true recommendations. I use dual action (DA) or forced rotation (direct drive) polishers.
I have many videos on my favourite polishers here:
The best: ua-cam.com/video/U1ZD0L3RCa4/v-deo.htmlsi=9_nshBIL-B5ndmHV
Also top tier: ua-cam.com/video/oiMMEOdXAbE/v-deo.htmlsi=lU0SYetwIUPtt4L0
My recommendations for more affordable polishers: ua-cam.com/video/LvPCkCqXEq0/v-deo.htmlsi=6lHVV8vI1kLWIOC7
@@PanTheOrganizer Thank you very much for bothering to give me the links, I already found them a few hours ago and I checked them out. Thank you very much for those great tutorials mate. 👍🖐
No worries. How did you discover my channel by the way?
Welcome to my channel. You discovered one of the biggest car detailing channels on UA-cam as we surpassed 930,000 subscribers and we have over 122 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers.
You found the right channel to help you learn everything about detailing.
Did you mention longevity of product if garaged? Thx pan
As Pan spoke about in the video durability is going to be dependent on several factors, including preparation, maintenance, mileage environment, etc. etc. under ideal circumstances, including preparation with a proper decontamination and paint correction durability is up to one year. However, in most real world circumstances, most real world, people will see durability between several weeks and several months.
@@directorofsuccess thank you so much.
How does this compare to Gyeon Q2M WetCoat?
WetCoat is a spray on rinse off sealant. Not the same thing.
You could maybe do some 50/50 shots on the hood the habe both beside
That would have been pointless, as I did a "before" and "after" and even a blind person could see that without the protection, the was ZERO water beading and very slow sheeting, and with the coating applied, tons of beading and quick water sheeting. It's a night and day difference.
Explain to me what a 50/50 shot on the same panel would have done differently?
Great! Now I want some$!
Hehe thanks for watching! What's your current go-to topper?
@@PanTheOrganizer the turtle wax hybrid solutions ceramic polish in conjunction with the graphene to the maxx wax that you recommend. I also have used some Malco products. Thank you for the great info on your channel.
Thanks for the trust you place in my opinion!
Hi Pan, can this be applied on a PPF? Is it safe?
Yes! This water-based product is safe for PPF
Hey pan is there a difference when detailing vinyl wrapped cars?
Not really, other than there are coatings now formulated for PPF and vinyl wraps. See my video: ua-cam.com/video/I3AszYhWhs4/v-deo.htmlsi=rls-5Sz4VMNAjBdq
I have a question on whether or not its a good idea to start a detailing business from your garage/driveway. I want to start a detailing business and don't know if mobile is the only way that will work.
You can do it from your house, from a shop or go mobile. It depends on your preference and also what customer base you have in the area.
And since you're planning on starting your detailing business, I have a bunch of cool videos that can help you out. Check these below:
✅ Is detailing really worth it? : ua-cam.com/video/Yq1B_UKNayo/v-deo.html
✅ 20 year old detailer making $130,000 a year: ua-cam.com/video/g08gkwfv1Wk/v-deo.html
✅ What products do you need to start a detailing business? ua-cam.com/video/FLq-vKIWhKw/v-deo.html
✅ Digital marketing secrets to make more money with your detailing business: ua-cam.com/video/Tv9GeGhA-AA/v-deo.html
✅ Custom installation of equipment in a mobile detailing van: ua-cam.com/video/IDUwfl8GmgU/v-deo.html
✅ How to start a mobile car detailing business: ua-cam.com/video/WV3FJcWf77I/v-deo.html
✅ How to become a successful entrepreneur: ua-cam.com/video/wTCfVmeMeEo/v-deo.html
✅ Mobile detailing truck setup: ua-cam.com/video/tnFjhkM4YJo/v-deo.html
✅ Things I wish I knew before I started detailing: ua-cam.com/video/SYqWRq27YgI/v-deo.html
✅ How to be more efficient at detailing: ua-cam.com/video/33ChaMf8dCM/v-deo.html
✅ Digital marketing to grow your detailing business: ua-cam.com/video/1Cd3N1g6mSw/v-deo.html
✅ How to rank your detailing website on the 1st page of Google: ua-cam.com/video/pNflfxehpHg/v-deo.html
What's the durability/longevity?
there are many variables (prep, use, maintenance, mileage, etc.) but most real-world people with real-world cars will see durability somewhere between several weeks to several months.
I just purchased P&S Bead Maker based on a video of yours that I just saw. How does this product compare?
Bead Hero is a ceramic based coating so will last longer and have better hydrophobics. I wouldn’t compare it to Bead Maker which is just a regular paint sealant.
Bead Maker only lasts 3-4 weeks so it’s not used for its durability. It’s used for its gloss and slickness. It’s hard to beat in those departments.