I think a part 2 would be good. Maybe not just specifically on spinning reels but like storing while traveling, cleaning, maintenance or maybe even the direction of the reel when casting. I’ve had 2 rods broken by from being stored on the bed of a pickup while being totally bent with suitcases and a bbq grill riding on top of them. The tips were broken and the guides were smashed. I can’t seem to convince anyone to depart with the“if they can bend on a fish, they can bend in the truck” philosophy. Also can’t seem to convince anyone that they’re holding the reel upside down cause they’ve only ever fished with a spincaster. This can affect the integrity of rod, hook up to a fish, wind knots, & winding capability as well. Maybe part 2 should be titled, “Don’t let anyone use your stuff.”
One of the biggest causes of line twist on a spinning reel, if line is put on correctly, is the line roller. Reels should have an oversized line roller (the bigger the better) with a line groove, and a ball bearing inside it - the design and function of this part on a spinning reel is critical. The line roller should turn very freely, not be interrupted or sluggish, and turning should not require very much line tension. If not, you will introduce line twist more than some other things mentioned (manually closing the bail does nothing but reduce wear on the drive gears). Some reel makers go cheap, put a bushing under the line roller, or make the surface flat across it, or don’t have the alignment correct with the spool edge. Must also make sure line roller stays lubricated to keep turning freely. I realize some of this comes down to design and what to look for when shopping for a spinning reel, it does make a big difference.
I don't think getting your reel machine spooled is necessary or good. In fact I've only gotten it done once and that reel (van staal vr50) had tons of wind knots. The more I used it, the less frequent they became but I've never had wind knots from spooling line myself. The main thing people need to know is that if you are going to spool a reel yourself, you want the line to come off the spool it came on by the spool spinning, don't let it be still and just come off the side. That will twist the line. You also want to have tension on the line as spool it. If you spool a lot of reels, investing in a line spool holder is not a bad idea. Next, I also don't think letting the bail trip from reeling is hurting anything. Its not pulling in line until it trips so I don't see how that would introduce line twist. I also don't think it's hurting the mechanism if the reel was designed to do it. Everything else I agree with.
I asked for the link to join in the last video. Your join button on the bottom right is not working correctly. When you tap on it, it just pops up more videos. Hope that helps with some troubleshooting
yup reel this fish in with the rod .. i hardly put load in my spin reel helps with the gear lifespan and other parts.. let the rod and reel of the drag do its job and enjoy the fish peeling drag thats what we like to hear.. of course if you bank fishing on drop off rocks and dock and heavy cover youll want to get them out there fast..
The Best way I avoid spinning reel mistakes.... I don't use them...real reel Simple...! Conventional Multipliers Reels Reign Supreme They always have and they always will.... No skill needed to cast a spinner... educate your thumb and you will cast way smoother and further than you ever imagined ...🤙😎👍 I see a lot of East Coast Striper guys buying $1000 Van Staal spinning reels . ..yes, its a beautiful CNC spinning reel.... but its not worth a Grand by any stretch... For a $1000 .. I can buy 3 quality multipliers reels that would shame any high-end spinning reel on the market in performance, line capacity as well as distance .... Just sayin...🤗
@Saltyscales.... No thanks, I'll stick to my conventional reels... I do own high-end spinners,.. I just don't like them.... 1st main reason is,.. there will always be line twist..even w/swivel.. 2nd, you can't get 200 yard casts w/spinner... 3rd, conventional reels out perform spinners everytime..even the lightest lure on your spinner ... I have BFS reels that will cast lighter lures further than you can cast with a spinner.. anything lighter,.. would be on a fly rod... then again.. I swing some pretty big flies.. 8" to 12" Muskie flies Just Sayin......👍😎🤙
@ 🌴😆 I’ve been patiently waiting to see you and the Wookie boy get out there and get a giant poon on a fly rod , just make sure you smash Chris’s barb on his fly 😂👍🏼
I think a part 2 would be good. Maybe not just specifically on spinning reels but like storing while traveling, cleaning, maintenance or maybe even the direction of the reel when casting. I’ve had 2 rods broken by from being stored on the bed of a pickup while being totally bent with suitcases and a bbq grill riding on top of them. The tips were broken and the guides were smashed. I can’t seem to convince anyone to depart with the“if they can bend on a fish, they can bend in the truck” philosophy. Also can’t seem to convince anyone that they’re holding the reel upside down cause they’ve only ever fished with a spincaster. This can affect the integrity of rod, hook up to a fish, wind knots, & winding capability as well. Maybe part 2 should be titled, “Don’t let anyone use your stuff.”
Thanks for the Tips, I’m getting back to fishing for the first time in 30 years
Glad to help.
One of the biggest causes of line twist on a spinning reel, if line is put on correctly, is the line roller. Reels should have an oversized line roller (the bigger the better) with a line groove, and a ball bearing inside it - the design and function of this part on a spinning reel is critical. The line roller should turn very freely, not be interrupted or sluggish, and turning should not require very much line tension. If not, you will introduce line twist more than some other things mentioned (manually closing the bail does nothing but reduce wear on the drive gears). Some reel makers go cheap, put a bushing under the line roller, or make the surface flat across it, or don’t have the alignment correct with the spool edge. Must also make sure line roller stays lubricated to keep turning freely. I realize some of this comes down to design and what to look for when shopping for a spinning reel, it does make a big difference.
I don't think getting your reel machine spooled is necessary or good. In fact I've only gotten it done once and that reel (van staal vr50) had tons of wind knots. The more I used it, the less frequent they became but I've never had wind knots from spooling line myself. The main thing people need to know is that if you are going to spool a reel yourself, you want the line to come off the spool it came on by the spool spinning, don't let it be still and just come off the side. That will twist the line. You also want to have tension on the line as spool it. If you spool a lot of reels, investing in a line spool holder is not a bad idea. Next, I also don't think letting the bail trip from reeling is hurting anything. Its not pulling in line until it trips so I don't see how that would introduce line twist. I also don't think it's hurting the mechanism if the reel was designed to do it. Everything else I agree with.
I asked for the link to join in the last video. Your join button on the bottom right is not working correctly. When you tap on it, it just pops up more videos. Hope that helps with some troubleshooting
Hey Jason, I tested it again. Everything seems to be working well. Have you updated your browser?
@ I’ll try that. Thanks for the update
yup reel this fish in with the rod .. i hardly put load in my spin reel helps with the gear lifespan and other parts.. let the rod and reel of the drag do its job and enjoy the fish peeling drag thats what we like to hear.. of course if you bank fishing on drop off rocks and dock and heavy cover youll want to get them out there fast..
The Best way I avoid spinning reel mistakes....
I don't use them...real reel Simple...!
Conventional Multipliers Reels Reign Supreme
They always have and they always will....
No skill needed to cast a spinner... educate your thumb and you will cast way smoother and further than you ever imagined ...🤙😎👍
I see a lot of East Coast Striper guys buying $1000 Van Staal spinning reels . ..yes, its a beautiful CNC spinning reel.... but its not worth a Grand by any stretch...
For a $1000 .. I can buy 3 quality multipliers reels that would shame any high-end spinning reel on the market in performance, line capacity as well as distance ....
Just sayin...🤗
Spinning reels are very simple tools, once you stop making the mistakes you have very few problems.
@Saltyscales.... No thanks, I'll stick to my conventional reels... I do own high-end spinners,.. I just don't like them.... 1st main reason is,.. there will always be line twist..even w/swivel.. 2nd, you can't get 200 yard casts w/spinner... 3rd, conventional reels out perform spinners everytime..even the lightest lure on your spinner ... I have BFS reels that will cast lighter lures further than you can cast with a spinner..
anything lighter,.. would be on a fly rod... then again.. I swing some pretty big flies.. 8" to 12" Muskie flies
Just Sayin......👍😎🤙
🌴🤔 Hummm, Spinning reel mistakes, Buy a fly Rod 👍🏼😆
lol no mistakes to make there
Most struggle with a spinning reel Dave lol. You are trying to get me killed 🤣🤣🤣
@ 🌴😆 I’ve been patiently waiting to see you and the Wookie boy get out there and get a giant poon on a fly rod , just make sure you smash Chris’s barb on his fly 😂👍🏼