Infiniti G35 camshaft position sensor replacement

Поділитися
Вставка
  • Опубліковано 8 лис 2018
  • Hi guys! if you find this video useful you can help me by donating , it don’t matter if it’s a small amount. Anything counts , link down below Thanks ^_^
    www.paypal.me/FixitFelix529
    ---------------------------------------------------------------------------------------------------------------
    if you want to buy the camshaft sensor click below
    amzn.to/2Rt2NEJ
    hey guys I had to replace the camshaft position sensor
    this where the symptoms I was getting
    1- Service Engine Soon light was on , VDC Off light was on and Slip light was on
    2- taking longer to start engine
    3- sometimes vehicle was stalling
    after replacing the sensor all those problems were fix , I hope this video helped you ^_^
    please Subscribe , Comment and Give a big Thumbs up
    this will work on infinity G35 year model 2003 to 2007
  • Авто та транспорт

КОМЕНТАРІ • 399

  • @FixitFelix529
    @FixitFelix529  4 роки тому +21

    Hi guys! if you find this video useful you can help the channel grow by donating , it don’t matter if it’s a small amount. Anything counts , link down below Thanks ^_^
    www.paypal.com/paypalme2/FixitFelix529

    • @JairusTakay
      @JairusTakay Рік тому

      I changed both the sensors but it’s still not starting, do u know what’s the possible problem can be

    • @j93mazda
      @j93mazda 3 місяці тому

      Change the crankshaft positioning sensor under the car

  • @Mak2Grim
    @Mak2Grim 3 роки тому +35

    Broski pulled out the 3rd grade pointer stick, legendary vid.

  • @GIZREED
    @GIZREED 19 днів тому +2

    I am about attempt doing this job in about an hr or so on both sensors. These are the easiest most straightforward instructions ive found so far. Will report back with results

    • @GIZREED
      @GIZREED 16 днів тому +1

      Didn't get to it until today. Was hard AF reaching the bolt on the sensors but I got it done 👍🏽👍🏽👍🏽

  • @NG-VQ37VHR
    @NG-VQ37VHR 5 років тому +121

    Holy crap man. It kills me that I can only like this once. Thank you for making this video. I just took care of mine in 15 minutes. I know there are a lot of us that run into this problem. I hope all of them in the future are able to find your video before pulling out the intake and throttle body. A shop wanted to charge me $500+ to do this.

    • @FixitFelix529
      @FixitFelix529  5 років тому +5

      Thanks 😊 i am happy to help

    • @BoonPre
      @BoonPre 3 роки тому +5

      Literally had the exact same experience! Thanks Felix!

    • @soliddbolthug5679
      @soliddbolthug5679 2 роки тому +2

      Yea they told me it wpuld be $780 after the diag price of 140. Just to replace the second one.

    • @mileen971
      @mileen971 2 роки тому +3

      @@soliddbolthug5679 yup a shop just quoted me 900+ dollars to change both of mine + labor and something told me to look it up because that price seems WILDLY high.

    • @soliddbolthug5679
      @soliddbolthug5679 2 роки тому

      @@mileen971 its no joke I have a aftermarket intake that was easy to move out of the way

  • @Juice-jx1pr
    @Juice-jx1pr 4 роки тому +150

    You do not realize how important a 10 mm socket is until you start working on the car

    • @OutdoorsWithGeoff
      @OutdoorsWithGeoff 3 роки тому +2

      FACTS!!!!!

    • @jovanlovett649
      @jovanlovett649 3 роки тому +15

      I love how you can take apart half the car w a 10mm sockett and a ratchet

    • @jesehernandez3071
      @jesehernandez3071 3 роки тому

      @@jovanlovett649 This is facts yo

    • @roberthamill2451
      @roberthamill2451 2 роки тому +3

      Seems to come up missing whenever friends borrow your tools.

    • @Juice-jx1pr
      @Juice-jx1pr 2 роки тому +1

      @@roberthamill2451 you might have to start charging $10

  • @sulatlalaki
    @sulatlalaki 3 роки тому +9

    I like how you showed the easier way to change it rather than taking all that other crap off. Very helpful! Thanks!

  • @edlincul6773
    @edlincul6773 2 роки тому +7

    Followed your directions and fixed my bank 2 sensor problem. Way easier than removing the air intake. Couldn't see a thing, all by feel, it worked out just fine. Thanks.

    • @bobbyheenan4061
      @bobbyheenan4061 Рік тому +1

      How hard was it putting the bolt back in without seeing it?

    • @edlincul6773
      @edlincul6773 Рік тому +2

      @@bobbyheenan4061 Actually it was easy because the sensor fits into the side of the block. You put the bolt into the sensor attachment hole and then just move the sensor around until the bolt lines up and can be threaded in. it is all by feel, but it wasn't hard. I changed the other side first so I could get a "feel" for what I was doing. It gave me the confidence to do the "blind" side. Good luck.

    • @bobbyheenan4061
      @bobbyheenan4061 Рік тому +1

      @@edlincul6773 Got it! Appreciate the tip! I was worried about dropping the bolt, but that sounds like the way to do it. Should have my sensors in a day or 2 so we'll see how it goes!

    • @bobbyheenan4061
      @bobbyheenan4061 Рік тому +2

      @@edlincul6773 Thanks again. Swapped out both cam sensors and the driver side was a piece of cake doing it your way...I used a 10mm wrench instead of a ratchet too. The passenger side was a bitch with that wire harness in the way, but I got the bolt back in eventually. Patience was key. Both sensors took me about 45 min. Thanks again!

  • @newnameauto
    @newnameauto 3 місяці тому

    Definitely just did this at my job, in the parking garage, after the timed light went off and it only took about 10 mins. Thanks for the tip!

  • @picassosenvy3191
    @picassosenvy3191 4 роки тому +6

    Thank you SO MUCH Felix!!!! I cannot express my gratitude adequately here in this forum. I am slightly mechanically inclined, but KNOW very little about auto. This was a relatively simple fix! You saved me unknown repair fees...AND, you saved me $62.00 USD on the sensor by guiding us to amazon....that's right!....just on the sensor you saved me $62.00 USD!
    THANK YOU SO MUCH!

    • @FixitFelix529
      @FixitFelix529  4 роки тому +2

      Thank you so much for your comment.
      I am happy to help ,
      it puts a smile on my face when I know I helped someone. 😊 God bless you

  • @ig4293
    @ig4293 4 роки тому +1

    Hey mate ! Thanks for putting this out there. I am taking my 2007 G35x in for service tomorrow and it has a camshaft sensor issue, so I will have some solid knowledge going in. All I need is a 10mm socket once I confirm the error codes. Awesome!

  • @thenextdogwhisperer
    @thenextdogwhisperer 4 роки тому +3

    Thanks Felix took me less than an hour to replace both you the man !!

  • @dixieflyer500
    @dixieflyer500 5 років тому +6

    Thanks for this Felix! Today, while taking my wife to her doctor's appointment in her G35x this sensor failed as we were coming off the interstate. I mean the car just quit. I thank God it didn't happen while we were at 70+ mph in multiple lanes of traffic. Got it home, and found out it was this sensor. The car is just 300 miles short of 100,000, and this is the first real problem we've had out of it.

    • @BiG__Disgruntled
      @BiG__Disgruntled 4 роки тому

      That's what happened to me except I was going like 85. Luckily it came back and I was able to get over before it completely shut down. I'm still not sure if it was this or a battery cable.

  • @roscoec.2575
    @roscoec.2575 3 роки тому +1

    I replaced them all thanks for the info! And yes a 10mm is a must for this car. I didn’t need an extension, just a long 10mm socket for more clearance.

  • @geepee5413
    @geepee5413 4 роки тому +2

    Great help Felix. I was not looking forward to removing the MAF and other parts. Thank you!

  • @TheRycooder
    @TheRycooder 4 роки тому +10

    Dude!! BEST VIDEO ON THIS HANDS DOWN!

  • @kevinkillian2165
    @kevinkillian2165 Рік тому +2

    OMG, thanks so musch for making this video; and for making it so clear and easy to follow. This saved me tons of anxiety of where to look and how to proceed. Be blessed my brother with all your car experiences!!

  • @melianos2742
    @melianos2742 3 роки тому +1

    Now I'm 1 step closer to becoming my own mechanic 💯👍🏼thanks brother

  • @robgamble2579
    @robgamble2579 Рік тому +4

    Great Video !!!!! Super easy to follow with the camera angles provided. Thanks so much for your help. I did both CAM sensors since I had the engine cover off even though my code said just drivers side was bad.

  • @larrysmith5130
    @larrysmith5130 2 роки тому +3

    Just got my g35 and I'm definitely doing this tomorrow. Felix for the win!

  • @roscoec.2575
    @roscoec.2575 3 роки тому

    I just changed mine. I have a 2003 and a 2005. Note that the 2003 has a bracket blocking the screw for the one on the passenger side. Scraped my hands up but it’s changed so far no check engine light! Thanks for the video it helped a lot! Also if the sensor doesn’t sit even when you put it back in, know that it’s slightly tilted not completely level so to get the screw in turn it a little. Good luck! 👍

  • @Headnsouth
    @Headnsouth 2 роки тому +1

    Great video, it saved me a boatload of time using your method. Once you find the sensor it's a piece of cake. Thanks for showing how to release the harness. They are always a PITA.

  • @snowboardingmtbiker
    @snowboardingmtbiker 3 роки тому

    I'm with all the others on this comment section, we really appreciate you posting this and saving us all money!!!

  • @heilong79
    @heilong79 3 роки тому +6

    Very little room in those engine bays, happy to see there is a quick way to do this.

  • @greenacrefarm01
    @greenacrefarm01 3 роки тому

    I haven’t changed mine for the longest time because of those other videos saying remove throttle body.. Thanks for this video just finished changing your way.

  • @Dreamchaser4L
    @Dreamchaser4L 2 роки тому +1

    This looks much easier than other videos making it seem, taking out the intake and throttle body. Going to give this a shot tmrw morning without removing the intake... regardless great video man

  • @TendiesMan69
    @TendiesMan69 2 роки тому +1

    props to you for getting those camera angles

  • @MRSOTELO408
    @MRSOTELO408 Місяць тому +1

    Thanks i was able to located and swap out both sensors in about 20 minutes. Video was very helpful

  • @erickmarin1636
    @erickmarin1636 3 роки тому +2

    You came in clutch Felix, thank you!

  • @croosz1959
    @croosz1959 Рік тому +1

    dude you just saved my life i’d like this video 1000 times if i could

  • @catchinhogs8434
    @catchinhogs8434 Рік тому +2

    Informative, easy, and to the point. You rock!

  • @tomcooper7189
    @tomcooper7189 4 роки тому +6

    This is an excellent video saved me tons of time and money thanks for sharing.

  • @mariajosefernandez1513
    @mariajosefernandez1513 3 роки тому

    I did a horn upgrade using Hella Supertones along with the stock horns...Hook them up with 14 gauge wire, relay, relay connector, fuse connecter,spade connectors, 1/4 inch wire loom, solder,heat shrink...I tap off the high from the stock horns to run the relay to the Supertones...They all sound great,and the install looks stock...

  • @davidwright9092
    @davidwright9092 Рік тому +1

    Best video I’ve seen on this repair! Period!! Thank you!

  • @scotttan6377
    @scotttan6377 9 місяців тому +1

    Another great video on the camshaft position sensor . I have an 2009 Infiniti FX 35. You taking the time to post this is giving me confidence as a DIY project . .
    Your others videos are above my head and comfort - level, but nonetheless , very informative .
    Subscribing to your channel !

  • @goldenbanana5079
    @goldenbanana5079 3 роки тому

    This fixed my issue, code scanner said it was bank 2 and I replaced it with this sensor and it fixed my issue. Car was having trouble starting up and had all the lights on. Dealership wanted $600 to fix it..

  • @ChiHoKo
    @ChiHoKo 2 роки тому

    Thanks for the video, help saved the time to remove a bunch of things. The clip is quite strong and I had to use a screwdriver to push it.

  • @captainyak3948
    @captainyak3948 2 роки тому

    Useful info...I had to do it from the other side before and it was a pain...Now I got the Hitachi one and I am going to follow your advice. Thanks!

  • @1badcisco
    @1badcisco 2 роки тому

    Best video on replacing this sensor I have seen
    Wish I had seen it earlier, would have saved $20 on the Hitachi OEM sensor.

  • @THEBONERGAMERPRO
    @THEBONERGAMERPRO 2 роки тому

    My man, youre a master at recording

  • @jgod876
    @jgod876 4 роки тому +2

    This video saved me tons of time, was super easy too. Thanks.

  • @jha8914
    @jha8914 2 роки тому

    Awesome u save me had p0340& p0345. Installed both worked great ty again

  • @DelinquentX-sp9ob
    @DelinquentX-sp9ob 5 років тому +2

    Wow thanks man i had the same problem your a life savor

  • @thomaslittle9948
    @thomaslittle9948 3 роки тому

    His way is the EASIEST way
    Thanks!

  • @bobbyheenan4061
    @bobbyheenan4061 Рік тому

    Great video!! The driver's side is actually easier than the passenger side since there's no thick wire harness in the way. I used a wrench instead of a ratchet...Took me about 10 min.

  • @mileen971
    @mileen971 2 роки тому

    Okay thank you SO MUCH I literally just got quoted over 900 dollars at a shop to do both of mine and my soul wasnt sitting right with that price...they are DEF inflating it like crazy which I don't appreciate at all....

  • @kadedalton3306
    @kadedalton3306 4 роки тому +12

    I COULDNT STOP LAUGHING WHEN HE OULLED THE POINTER OUt

  • @williampegues7987
    @williampegues7987 3 роки тому +1

    You are the man ,major respect

  • @MysticShot
    @MysticShot 4 роки тому +2

    Did the passenger side sensor 3 days ago. Now my driver side is failing so replacing that today! Thank you

  • @lastking2114
    @lastking2114 3 роки тому +1

    Love these videos man!

  • @alexbarron1934
    @alexbarron1934 11 місяців тому +1

    lol I had the same lights and everything. I’m abt to do the job right now. Thx man!!

  • @kenny2xtimes61
    @kenny2xtimes61 4 роки тому +1

    Good video man
    Keep up the good work 💯

  • @soliddbolthug5679
    @soliddbolthug5679 2 роки тому

    No fr dude. You saved me 280 in a month im saving to move appartments. HUGE help. Let's see how easy it is for me to remove that clip with 1 hand lol

  • @zuno951
    @zuno951 4 роки тому +1

    Bro thanks for this! 💪🏽

  • @abramrodriguez3898
    @abramrodriguez3898 4 роки тому

    Wow felix!! Thanks a million. You saved me lots of money.

  • @carlosbertadillo3374
    @carlosbertadillo3374 4 роки тому

    Great video! Replacing mine in the morning!

  • @ACEStreetracer4life
    @ACEStreetracer4life 3 роки тому +1

    THANK YOU THANK YOU THANK YOU 10000000 million likes. You saved me time and money, luckily mine was Bank 1!

  • @markk4708
    @markk4708 5 років тому +6

    Awesome vid. Had mine done in 20 minutes, 2005 G35 sedan, base auto (hot engine). Love the vid, thanks!!!

  • @anthonyswider664
    @anthonyswider664 2 роки тому

    Good job, brother. You helped me out . Thank you.

  • @zerosjourney9887
    @zerosjourney9887 Рік тому +1

    Great video and thank you for getting that difficult camera angle

  • @yazming1720
    @yazming1720 4 роки тому +1

    Kewl video and to the point great pointer lol... Keep up the great work.

  • @VeronicaRodriguez-mu9yx
    @VeronicaRodriguez-mu9yx 5 років тому

    You just saved me a lot of money dude

  • @Renault-v10
    @Renault-v10 9 місяців тому

    1:55 😂I died never seen that before but thanks for the tutorial it fixed my start up issue

  • @nenadobradovic9021
    @nenadobradovic9021 4 роки тому

    Thank you brother. God bless you!

  • @DiQu40
    @DiQu40 4 роки тому +6

    THANKS SO MUCH... YOU'RE A LIFE SAVOR.

  • @marctunstall9055
    @marctunstall9055 4 роки тому

    Thx so much, really helped out much love.

  • @lizhernandez320
    @lizhernandez320 3 роки тому

    Code P0340 just came on my G35 so I’m guessing it’s sensor 1 for me… Thanks for this video!

  • @PapaSmurf63B
    @PapaSmurf63B 5 років тому

    Great video. Thanks for the info 👌👌👌

  • @j7cars182
    @j7cars182 10 місяців тому +2

    Very informative!

  • @BIGB0SS202
    @BIGB0SS202 2 роки тому +1

    Thank you so much I appreciate you you saved me a lot of $

  • @bobmendez7861
    @bobmendez7861 Рік тому

    Wow bro I hope I can get to it from that side I did not want to rip the throttle body off great camera work

  • @aaronf80m394
    @aaronf80m394 4 роки тому

    Nice bro thanks ! Great video

  • @302.marco_
    @302.marco_ 3 роки тому

    Thanks man really helped

  • @interlinkedMedia
    @interlinkedMedia 3 роки тому

    Auto-Lab just tried to charge me $600.00 for this. Thank you sir.

  • @brianlee677
    @brianlee677 2 роки тому

    Great video my brothers g35 has the same code but almost stalls randomly.

  • @angelicatorres2855
    @angelicatorres2855 4 роки тому

    You are the best!!! Thanks

  • @SY-ud6jo
    @SY-ud6jo 5 років тому +3

    Great video! Do you know if these instructions and the amazon part you attached work for a 2008 G35 also?

  • @codyvonelm1993
    @codyvonelm1993 3 роки тому

    Huge help thanks bud

  • @jocacordova
    @jocacordova 4 роки тому

    Thank you to do this video help me a lot

  • @brandon2991
    @brandon2991 Рік тому +1

    Bro you saved my life !

  • @josefstemeseder3616
    @josefstemeseder3616 2 роки тому +1

    worked for me - thanks!

  • @cadavher
    @cadavher 5 років тому +5

    I love g35s. I traded my 350z for a Infiniti so I could have a all year round car. Too bad they're aweful for so many failed parts lol. Out of my 300zx, 350z and now my g35, the g35 has everything the car can have wrong, wrong. Both door actuators went, both window motors, my mirror motor, my gas gauge, and now both crank and cam sensor. It's only got 70 thousand miles on it. I really wish I wasn't so attached to the body style or exhaust of them, or I would get another 350. Just finished changing the window motors yesterday, going to do the sensors now. Thanks for this video! I wouldnt have known you could get to them from the side.

    • @FixitFelix529
      @FixitFelix529  5 років тому

      Lucky Lex you’re welcome. I hope you car last forever

    • @boracay12
      @boracay12 5 років тому

      The windows and door locks have a bad wire connection , coming from the body driver side to the door , i tied a string to the wires and pulled it tight to the door bracket . As a easy fix . I can not access the wires . The engine ground are bad too . Had to clean those and install extras. It shorts out the coils other wize , all 6 .
      Now its the " clock spring " in the steering wheel . Nissan is now co-owned by renault ,and crap .

  • @notacop3439
    @notacop3439 8 місяців тому

    I was having the same issues. I replaced the camshaft sensor and haven't had any issues since.

  • @MKMeadows
    @MKMeadows 8 місяців тому +1

    Great video Thank you !!!!!!

  • @ipodmasterguythatlik
    @ipodmasterguythatlik 4 роки тому +35

    Lmfao the pointer had me laughing out loud

    • @joshnelson7653
      @joshnelson7653 3 роки тому +2

      ha yea it did. i said to myself, "huh, it is an actual pointer...finger".

    • @EverythingGreenville
      @EverythingGreenville 3 роки тому +3

      Crying bruh! You know before the video he was like, “where is my pointer?”

    • @invalidusername_5101
      @invalidusername_5101 3 роки тому

      Bro I swear 🤣

  • @joserodas7989
    @joserodas7989 5 років тому

    Sweet bro thanks!!

  • @CesarDiaz50215
    @CesarDiaz50215 4 роки тому

    Nice help me a lot thank you

  • @parlayprofitsfx3948
    @parlayprofitsfx3948 5 років тому +4

    Just bought it gonna replace ASAP good price too

  • @BruceWayne-fz7zt
    @BruceWayne-fz7zt 4 роки тому +4

    Excellent camera work. Every other video of this procedure did not show as much close up detail. My 350Z awaits.....Thanks so much.

  • @tamararenee1920
    @tamararenee1920 3 роки тому

    Thank you so much. The only problem I had was that your gloves matched the engine and it was hard for me to tell the diff, but I’m old. Lolol. How often would you recommend replacing a chain timing belt in the infinity? 😀

  • @torrancegreen3491
    @torrancegreen3491 2 роки тому

    NICE CAMERA ANGLES!!!

  • @dakhangsta
    @dakhangsta 2 роки тому

    Thank you!! Just one question when mines did that I had hard time starting it up? It takes about 2-3 cranks to start it ?

  • @JairusTakay
    @JairusTakay Рік тому

    MANN THANK YOU VERY MUCH

  • @xkingjx888
    @xkingjx888 Рік тому

    Made it look easy

  • @214noel
    @214noel 4 роки тому

    I did it thank you so mucho bro Dios te bendiga

  • @victorgarcia5255
    @victorgarcia5255 5 років тому +1

    Thank you

  • @Loftavel
    @Loftavel 4 місяці тому +1

    great vid thanks

  • @yinda8659
    @yinda8659 4 роки тому +1

    At the dealership and they want $374 to fix.... I now have a weekend project 😎. Thanks!

  • @ferndogg4427
    @ferndogg4427 3 місяці тому

    I just replaced the crankshaft sensor for this exact car yesterday

  • @a100beatz7
    @a100beatz7 2 роки тому

    Awesome!!! 👍🏾

  • @TheRycooder
    @TheRycooder 4 роки тому

    Subscribed!