Does Your Mazda Pop Out of 5th Gear? Heres How To Fix It Without Pulling The Transmission!
Вставка
- Опубліковано 15 жов 2024
- This video details the repair procedure of replacing 5th gear on almost all front wheel drive mazda transmissions. This applies to 1983-2009 5-speed Manual Transmissions
Please, Don't use the shifter has a hand rest when driving in 5th gear! This is what causes this problem.
This repair is done with the transmission in the car, and usually takes no longer than 1 hour.
You'll need a 10mm, Torque wrench, Hammer, Punch, and depending on transmission type, you'll need larger sockets between 1" and 1.5". Take your time, follow the video and please, ask any questions you may have.
Subscribe for more car videos!
years ago, had a roommate who parked his maz pu in the driveway, had to move it, floor jack to the diff, lift, roll, drop.. he blamed me for his 5th gear popping out while driving... huh? never heard that before... he wanted to sell it, so as a fix i got him a 4 speed shift knob and swapped it in under 2 minutes...FIXED!
Why does this guy look like a combination of film stars such as adam sandler, jason biggs, and Singers like the jonas brothers?😂😂😂😂
Superb video, by the way. New sub.
Thank’s heaps for this video,
I’m needing to replace 5th in my Familia GTX & this is such a good walkthrough for taking 5th out
Cheers!
Instablaster
Good explaination of the problem and explaination of the solution. Good video showing the steps needed to disassemble and reassemble the transmission to remedy the problem(s). Thank you.
,
Thank you so much for this video man! Very clear, very detailed, helps a lot! You rock
You mentioned changing the gear ratio on these, I have a 2006 Mazda 3 2.3L S Hatch, could I possibly get a taller 5th gear so I'm at lower RPM on the freeway for better gas mileage?
Awesome
Nice to know someone who cares and knows what they're doing 👍
Would this be the fix for a 2011 Mazda 3 sport that won’t go into fifth? Fourth and sixth are fine. Thanks for the help and video!
If that is weldable aluminium , maybe run a bead around the shift fork . Gotta do what gotta do on obsolete parts . Another option maybe cast a new fork .
Good video bro and you look like Adam Sandler. :)
Where can I get the ball bearing keeper for 5th gear? First video that I've seen that showed that ball bearing. Thank you
my mazda has a few problems... it sometimes goes into fith and other times is shows that its in but the car is in neutral still. ive had it pop out on me once as well. not sure if this a combo of sncros, and the shift fork as well. im confused if you get a transmission rebuilt how they can re use a shift fork if its facked? whats your thoughts on this
how would we know if its something to do with the gear box? and not the clutch or master cylinder ?
Clutch and master affect every gear
ok cool.. yea cuz my mazda 2 2014 when car is on will not go into any gear but when off it goes in all gears i thought it was gear box @@I_Do_Cars
Hello. Would love to get my 1989 MX6 to you to repair the 5th gear. Where are you located?
Any comments on why this failure occurs? Oiling? Bending? Wear due to the driver resting their hand on the shift knob like it was some kind of an armrest? Is it likely that any parts from a salvage yard will also have this issue?
Thanks for the video I'm about to do my 88 Mazda mx6 Gt
Queensland Australia flooded in 2011 aswell where about in the usa are you ??
I have a Ford Focus, 2003, my car does the same, 5th gear pops out (other gears work just fine). I'm getting quotes of $2000-$2,500 estimate to repair. Yikes! Any suggestions? Please!
buy a transmission from a pick a part and put it in your self
I have an 06 Ford Focus that’s just started doing this.
i have 2016 lancer manual and the warranty wants to have it open to see if i damage it or idk but it’s 1500 if it doesn’t cover and it’s still on warranty full stock
Hi hello 👋
I have a mazda 323 1997 protege manual and it's not taking the 1st gear in a still position but when it drives takes it what can I do to fix or replace?
I have a 98 626 that is stuck in gear what would cause this. I replaced the slave cylinder already.
What's causing my 2005 mazda 3 2.0 to fall out of 3rd gear , you have to be physically holding it in , with heaps of pressure .
02 Mazda Protege 5 manual - same, It pops out from 3rd gear if I don't keep my hand on...any luck to fix this? Suggestions?
got any for 2010 mazdaspeed3?
What did you do to destake the nuts with the transmission still in the car. It doesn't seem like there is much room to swing a hammer there.
Turn the shafts so the staked park is at twelve o’clock so you have more room to destake them.
I have the exact same problem on my 2013 mazda 6 with manual gearbox. But it is the 6th gear that pops out. Could it be a similar fix? Can't find much info out there on this problem and my the mazda repair shop want tons of money to solve this by swapping the gearbox!
Hi mate, did you fix it? What was the issue? I am having 6th gear pops out on a 2014 mazda 6
You have parts for that transmisión?
I have some! What do you need?
Can you fix a Demio reverse like this
Adam Sandler
I'm looking at a Honda civic with 3rd gear that pops out while driving. How to fix?
White Jesus those are designed a bit different. Will require trans removal and splitting the case. It’s usually a slider or fork issue.
Can't find 5th gear anymore. They don't make just the gear
My yugo does this in every gear
Check your mounts front rear transmission and engine mounts could cause this to happen in all gears due to excessive movement.
@@prominentsolutions3560 thank you I have tightened some of the mounts and discovered that some of the rubber mounts were gone and it helped a lot!!