No, I actually had to take it to an FP Shop to get them to flash it back to factory. I have a video about it on my channel where I take my car to Galpin Auto Sports.
@@mustangmodsecoboostgarage6539 alright, that may be the best option for me then. Ford Performance gave me a stock tune, but I'm not sure if using the cobb to write over that will brick the car
@@mustangmodsecoboostgarage6539 Unless I am able to connect to the PCM with the cobb and the stock file they gave me. You said when you tried to connect the Cobb to the PCM, you got an error message? Also, how much did they charge to flash back to stock?
@@kameronalu5031 I was not able to get the Cobb to Install on my car without flashing back to a factory Tune. It would not even recognize the PCM. It would only work in Demo mode when I plugged it in. However, I was not able to get my factory Tune flashed back on my car using the Procal Software. It would not even display the RESTORE button. That is why I took it to Galpin.
When you connect the Cobb to be able to flash a tune map, you need to first "Marry" the Cobb AP to the car. This is done by selecting the Install option from the menu. This would not even show up for me because I was in Demo Mode, until I returned the car to the factory Tune. Galpin did this free of charge because I had a warranty claim with Ford Performance about this issue that I was having.
I don't know as I do not have that spoiler. I would reach out the ZL1 and ask them directly. If not, then they may have something that does fit your needs.
I guess any wicker bill will fit with some modifications. If you do not currently have a spoiler and you will need to drill your own holes then you can choose which hever you like. If you are trying to use the existing holes then make sure to check the compatibility with the manufacturer.
I can't remember the size, but the drill bit was supplied with the Spoiler. They give you everything you need to install it except the drill and the riv-nut tool, which is sold separately.
Seems like Hou didn't mark the holes in the correct spot. That's why I started in the middle and had someone hold it up while marking the other holes. I hope you can fix it. You might try going to a bigger size, or widen the holes on the wicker bill to fit the holes you drilled on the spoiler.
How do you have a tune plus stick and a purple drank 😂. Tune
Plus the best hands down! They building me my 1000whp ecoboost mustang!
Yes, I have bothered decals but mot both tunes. I am tuned with PD Tuning, but purchase my plugs and some other parts from Tune Plus
@@mustangmodsecoboostgarage6539 but why !!! When tune plus so much better!!
Looks good 👍🏼. More drag now though.
Hopefully, more downforce to keep the rear-end planted.
Do you have a mods list?
@@TK-ex5ns CV Fabrication Race Intercooler, Airaid Intake Tube, UPR DV Catch Can, NGK 6510 plugs, BMR IRS Lockout Kit, Cobb AP with E30 Tune from Ryan Martin.
Waiting for mine to get here.
how long did it take?
@@jesuss.swolee I don't remember, I want to say a week
When you switched from the FP to PD tune, did you just switch the car back to the stock map and then upload the PD tune?
No, I actually had to take it to an FP Shop to get them to flash it back to factory. I have a video about it on my channel where I take my car to Galpin Auto Sports.
@@mustangmodsecoboostgarage6539 alright, that may be the best option for me then. Ford Performance gave me a stock tune, but I'm not sure if using the cobb to write over that will brick the car
@@mustangmodsecoboostgarage6539 Unless I am able to connect to the PCM with the cobb and the stock file they gave me. You said when you tried to connect the Cobb to the PCM, you got an error message? Also, how much did they charge to flash back to stock?
@@kameronalu5031 I was not able to get the Cobb to Install on my car without flashing back to a factory Tune. It would not even recognize the PCM. It would only work in Demo mode when I plugged it in. However, I was not able to get my factory Tune flashed back on my car using the Procal Software. It would not even display the RESTORE button. That is why I took it to Galpin.
When you connect the Cobb to be able to flash a tune map, you need to first "Marry" the Cobb AP to the car. This is done by selecting the Install option from the menu. This would not even show up for me because I was in Demo Mode, until I returned the car to the factory Tune. Galpin did this free of charge because I had a warranty claim with Ford Performance about this issue that I was having.
Does this fit on the MP CONCEPT Performance pack spoiler
I don't know as I do not have that spoiler. I would reach out the ZL1 and ask them directly. If not, then they may have something that does fit your needs.
Which wicker bill wil fit on a regular 2019 mustang ecoboost?
I guess any wicker bill will fit with some modifications. If you do not currently have a spoiler and you will need to drill your own holes then you can choose which hever you like. If you are trying to use the existing holes then make sure to check the compatibility with the manufacturer.
What size drill did u use?
I can't remember the size, but the drill bit was supplied with the Spoiler. They give you everything you need to install it except the drill and the riv-nut tool, which is sold separately.
Where did you get the rivnut tool?
I got it from the ZL1 Addons website, just added it to the order for about $25.
Anybody know if this would work for the Track Pack spoiler? They look very similar in dimension
I don't know, but if you check the ZL1 Add-Ons website they nay have one that is made specifically for that spoiler.
What finish for the wicker bill is this?
This is the Standard finish. The tinted finish is see through and smoked for both pieces. Mine only has the smoked, see through piece in the middle.
@@mustangmodsecoboostgarage6539 awesome! I’m definitely going with this finish. Great video by the way.
@@izaknavarro23 thanks.
how to order?im stay malaysia
zl1addons.com
I just tried this and royally messed up somehow
What happened? Were you able to fix it?
@@mustangmodsecoboostgarage6539 I have not tried yet but Ik got it all in to find out that one or two didn’t line up
l
Seems like Hou didn't mark the holes in the correct spot. That's why I started in the middle and had someone hold it up while marking the other holes. I hope you can fix it. You might try going to a bigger size, or widen the holes on the wicker bill to fit the holes you drilled on the spoiler.