@@SSPENGINES383Bruh motivation back pressure 🔥🤘🏿I want that on my 03 Tahoe 5.3 4x4. I already have brand new summit racing long tube headers magnaflow cats and borla mufflers cold air intake k&N uninstall waiting to my stage 2 cam to arrive. Love the content I be geeked 😂🤘🏿🔥💯
Very cool 🤙 I build all my own engines i still have a couple small blocks running. But i have a handful or so of built big blocks. Im daily rollin a turbocharged 468 squarebody 11.5:1 on pump gas. We do have a station with 110 at the pump once and a while i run a tank
Did you rebuild or just add bolt ons??? I have a 49 ford with a 454 sitting onthe floor. I ben considering s 460. Which motor do you think i should do? Now if i do go 460 can i fo the same add ons to make the 460 haul ass like this?
Agree,4sho nothing like low end big Block torque. Put a mild cam in it got a smooth daily driver.no need 4 a ls swap.plus ur not going to get this simplicity out of a ls swap or much daily drive ability with a 600 hp ls.enjoyed the video. Good stuff my man.
@@havoc9926 hell yeah that's why I'm staying small block.... might think about going big block in the near future but we will see when the time comes but until that day comes going to work on getting that 400sbc with 560hp
@@SSPENGINES383good ole Jonesboro I use to live there bout 28 years ago went to a a school called Mt Zion or something like that lol I’m from and live up north in Pittsburgh pa
Dropped my big block in 460 messed round tried to go efi and yea with the amount of power on my bbc that efi wasn’t it so just need to hook carb back up if it ain’t broke don’t fix 12:5:1 compression 110 gas on mine
A lot of people don’t know the difference between a race car and a street car it’s simple u can make the same power as a race car and not be a race car
@@SSPENGINES383maan I wish you did, the content I've watched since Ive subscribed I'm sure if you studied them you could build Buick motors as well, I believe in your work that much,but great job on that regal 👍🏾.
RIP my Popz he used to say “No Replacement for displacement!” 🏁
Now that’s how big block suppose to run!!! Nice build Rod!!! 🔥🔥🔥
Thst motor sounds good love the Chevy Big Block. Good work sir
600 horse grocery getter nice
Ooowwweeee that big block Chevy power is what separates boys from men Keep It coming geeeeee 👀💪🍿
No doubt
@@SSPENGINES383Bruh motivation back pressure 🔥🤘🏿I want that on my 03 Tahoe 5.3 4x4. I already have brand new summit racing long tube headers magnaflow cats and borla mufflers cold air intake k&N uninstall waiting to my stage 2 cam to arrive. Love the content I be geeked 😂🤘🏿🔥💯
@@daeshonkaine3172 preshate it fam
Very cool 🤙 I build all my own engines i still have a couple small blocks running. But i have a handful or so of built big blocks. Im daily rollin a turbocharged 468 squarebody 11.5:1 on pump gas. We do have a station with 110 at the pump once and a while i run a tank
Now u just answered my question my next big block build I wanna turbo on pump 93 for a work truck
Where are you located? I have a squarebody I want to have a little juice
@@Chevyboii Spokane WA
What king of gears in it 💯
3:73s
Nice job on the big block, about how much will I be looking at to get a combination like this one something that I can just can have fun with?
Love your work. Need to come see you for my elco
Fasure
@@SSPENGINES383what headers did you use bro? I have a 1986 Monte Carlo SS and I need to know
@charlielittle4756 flotech long tube
Boiiii that thang rite wish i live near you too get my small block right. Keep up the good work
Appreciate it fam
I like that you dont make people buy parts they dont need. For this i subscribed
What headers did you use? They fit nice
🔥🔥🔥 I plan on building a big block to throw in my 88 firebird. You definitely motivating me 💪🏾
Man I love this channel man yall never disappoint yall shits be runnin
I like this motor setup I definitely need u to do a motor for me
🔥🔥 ssp got that motor geeking.
That compression is righteous!!!
💪🏽💪🏽💪🏽🔥🔥🔥Big Block Mafia!!!
Dang that boy sound amazing
Good work subbed 💯
What kinda headers u use to fit that gbody im building a 505 right now to go inside my cutlass
Dome or flat top pistons in it?
💪🏾💯 I definitely would let you build me some motors
🔥🔥🔥
Did you rebuild or just add bolt ons???
I have a 49 ford with a 454 sitting onthe floor. I ben considering s 460.
Which motor do you think i should do?
Now if i do go 460 can i fo the same add ons to make the 460 haul ass like this?
Yessir ⛽️💨💨🏁‼️ i need a tuneup on my regal !
We gone gotcha right on in
Yoo big guy wats da year u used for the headers
Bro you got that big block running like a sewing machine, Man I got a 70 short bed c10 that I need you to lay hands on.
Fasure
Hold on S.S.P you didn't tell me nothing about you turning the shop in to a one stop shop... lol🏁🖤💪🏾 #we got oil pressure
😂
@@SSPENGINES383 how to make a appointment? What’s your number bro
Street car is where it's at
Fasure
Agree,4sho nothing like low end big Block torque. Put a mild cam in it got a smooth daily driver.no need 4 a ls swap.plus ur not going to get this simplicity out of a ls swap or much daily drive ability with a 600 hp ls.enjoyed the video. Good stuff my man.
@@havoc9926 thanks man
@@havoc9926 hell yeah that's why I'm staying small block.... might think about going big block in the near future but we will see when the time comes but until that day comes going to work on getting that 400sbc with 560hp
How much for this setup?
I guarantee he ain't touchin nun for less than 10k. He well worth the cake tho
Have to back and look at invoice but I wanna say parts labor to build it and machine wrk was jus over 9k install was seperate
for a street car thats got some ponys😳😃🤣
Too Solid 👊🏾
Mane sounds dam good bruh 😎
Damn we need yo work in Memphis hell💯💯
Man where is your shop located I need a engine please
I'm located in Jonesboro ga
@@SSPENGINES383 what is your address
@@SSPENGINES383good ole Jonesboro I use to live there bout 28 years ago went to a a school called Mt Zion or something like that lol I’m from and live up north in Pittsburgh pa
Where did you find them electric radiator fans ??
Lol😂 two tifferent. I understood you. Two totally different things
🤣😂🤣
“Just ride and slide a lil bit”
What degrees did you set your timing? My 454 is drinking fuel. I have a 400 turbo trans and factory rear gears in a 1982 chevy c10.
Think total timing was conservative at 30
Will a regular build like this keep up or beat the “hemi” and “scat packs”??
I whoop hemi and scats all day with small blocks
Do you got a vacuum pump on that or is it running to your intake?
Running from intake like factory
@@SSPENGINES383 man see somebody told me I needed the pump so I went ahead and bought a $500 pump I’m physical pull it and take it back
@rayguajardo4541 I have a fairly large cam in this motor and breaks are peefect
How big of a cam do you have to have an order to use one of them vacuum pumps?
@rayguajardo4541 I've only needed 1 for my high compression race motors all my street stuff hooks up like factory and stops like factory too
Dropped my big block in 460 messed round tried to go efi and yea with the amount of power on my bbc that efi wasn’t it so just need to hook carb back up if it ain’t broke don’t fix 12:5:1 compression 110 gas on mine
Oh yea she making some steam
🔥🔥🔥🔥
Even a 250hp 454 made 400 tq . Nice build
👀🤛🏾😎 THE NICE CLEAN KNOW FUSS NATURALLY ASPIRATED MOTOR..MY FAVORITE 😂😂😂💪🏿💪🏿💪🏿🏁🏁🏁PS You got to put a patent on them slides 😂😂😂 SSP!! 🤛🏾😎
I miss that interior
What's funny to me after listening to this, we all go in the shop and say the same shit. Never met each other...lmao
🤣😂
SSP do you mess with Pontiac motors
Boy I love a good regal build check out mines💪🏾💪🏾
Will do fam
💯💯💯💯💯
Where are you located and can you give me price range on a big block for a 1973 impala
Cam Specs & Which cylinder heads ?
Stock heads with Howards hydraulic roller
@@SSPENGINES383 Exactly which Verizon n 454 is this??
How much a build on a 400 like that
Small block 400?
@@SSPENGINES383 yes
Where r u located bro
what state and city is this
A lot of people don’t know the difference between a race car and a street car it’s simple u can make the same power as a race car and not be a race car
Yesirr
What radiator and fans u running
Think both were summit brand
What transmission you running?
BOP 400 with adapter plate
Whats the head & cam specs?
Stock heads howards hydraulic roller cam
Making Conventional Good Again!
We see you up here in NE Ohio!! You swanging them builds, side ways all day!!
💪🏾💪🏾 thanks fam
Damn !!!!!!!! What's the stall #🫡💯🔥
💪🏾💯🔥
Y’all already know SSP is there
Do you ship engines?
Yesir I can I will have a website soon with stage 1..2..&3 builds you can purchase ready to drop in
@@SSPENGINES383congrats that's a move . Watching in bay area california
We cooking with grease….ssp 🏋🏽♀️
She talking shit too 👌🏿💯
Is he stock rear end?
Tbh it was done wen he purchased the car but it's nothing special beside posi and 3:73
Yessiirrr
💪🏿
🥁
That mf hard
Good work SSP do you build Buick engines I know you do SBC
That's what I want to know I have a 76 Pontiac Bonneville big block 400 I want to know can he get it right for me
Lol now those I don't do....
@@SSPENGINES383maan I wish you did, the content I've watched since Ive subscribed I'm sure if you studied them you could build Buick motors as well, I believe in your work that much,but great job on that regal 👍🏾.
What’s the price on the build?
Price varies depending on parts used but this was right under 10
I would of did a big block buick in buick
Man I need to bring my car so you can look at it and tell me what you think I need to do got some bs in there right now
Let's work
1 (800) she-rips!!!
🤣😂 I like dat
i want to build a 496 for my 73 impala can u get in touch with me
Price range
tampa florida area
Bro do u have a shop number or Instagram so I can bring u my motor .
Ugly refrigerator perfect name 😂😂
😂🤣😂
My 383 is not firing on all cylinders I put a new distributor new spark plugs and wires 4 cylinders are not fired
Timming?
Need more info like heads cam and piston style
i have a 1985 buick regal with almost same setup but i would love to freshen up By you big im an the rampa bag area
Can make that happen
Naw you can get granny with a 305
Cyberater
That's at least a 572
😂 far from it
As heavy as that motor is you should be doing 1000 hp 😡😡😡😡😡😡😡
Not quite would need at least 632 to do that on motor on pump 93
💪🏿