DIY Bubble Wall Using Acrylic Sheets
Вставка
- Опубліковано 2 жов 2024
- Hello and welcome to my channel.
In this video, I am making a bubble wall which can be used for decoration for multiple events or festivals. The materials I am using basic materials like acrylic sheets, aquarium air pump, flexible pipe an some adhesive. Hope you like the video.
Please like the video and share if you find it useful. make sure to click the bell icon and turn on all the notifications to never miss any upload. also checkout other videos on the channel.
From. Where to get the acrylic sheet? And how much it costs?
Bought it from plastic shop. You can ask in the shops that make number plates for vehicles. Cost around ₹140 per sq ft.
If you are trying this, I will advise you to use glass instead of acrylic since glass panel will be cheaper and from personal experience I have learnt that acrylic sheet will flex due to water pressure.
@@DIYwithAK ok I'll take your suggestion .. tha k you for wonderful idea
Hi freand
ILife to make one 60 cm wide by 120cm in hight..
Please advice me the thickness of the acrylic sheet should used.
Thank you
Better to use glass instead of acrylic
Because acrylic sheets will flex due to water pressure and may cause the joints to open or leak. And make sure to use Aquarium sealant instead of silicon sealant.
@@DIYwithAK
Than you alote
Will it be cheaper to use acrylic sheet or to use glass sheets?
The price of glass sheets will be little bit less. And ideally, glass would be a better option because of its hardness.
The issue I faced with acrylic was that it flexed quite a bit in the middle due to water pressure when I filled it up.
@@DIYwithAK so why to use acrylic sheet instead of glass?
Sir Kya silicone ki jagah glue gun ka istemaal KR skte h
Kya glue lagane se yeh leakage Karega
Agar acrylic ka size chota hai toh glue gun use kar sakte. Otherwise, you need to use silicon sealant.
You can also use resin based glue for stronger bond.
Woooww ❤️❤️❤️❤️❤️ verry good ideas . I love it
Pani neeche se nikalega nahin kya?
Neeche to fix nahin hua na
Neeche bhi sealant laga kar fix kiya hai.
Pani nahi niklega
@@DIYwithAK thank u
Nice work ...appritiated man..can u share sheet price
It's a 5 mm thick sheet. 2×2 feet. Costs around 600 INR each (with cutting).
Thanks for your support.
Bohot easy method hai thanks. Ek baat plz or clear kardijye. Glass bubble wall ko clean kaise karenge.. main is par video dhond Raha ho magar koi ab Tak nahi mili.. plz agar koi idea hi to share zarur karen
Cleaning process difficult hai. Clean water se rinse karna padega because gap bohot kam hai. And it is advised to keep the top side of glass and pipe ends closed when not in use.
Looks very easy
Bhai kha s milega
Air pump ko water level se upar rakhna hota hai ya wall ke niche side kahi rakh sakte hai
Niche bhi rakh sakte. Koi problem nahi hoga
Nice bro, I need a suggestion that I wanted to make 3x3 ft bubble wall and m bit confused that weather to use glass or acrylic ? And if I use acrylic sheet then Dr fixit silicone sealant is best suit or not because I m doubtful that silicone sealant is best for acrylic bond and for leakage ?
Hope you will reply
Thanks in advance 😊
You can use either glass or acrylic.
Glass is harder, cheaper and will not flex when water is filled. Acrylic is easier to work with but it will flex and bulge when you fill water. If you use acrylic, you need to have multiple chambers throughout to prevent the flexing. (This is a mistake I made)
Now coming to the sealant. You need to use glass sealant with 100% silicon (used in aquarium). Dr. Fixit is not suitable as it will start leaking after some time. (I learnt this the hard way)
You can also use some kind of secondary adhesive in combination with the sealant (like epoxy adhesive or strong tape) on the outside after silicon dries to make sure the silicon will not give up against water pressure.
For a 4 feet by 6 feet height with 5 mm thick acrylic sheets how many chambers or divisions are required plz .
N am going to use epoxy base adhesive fevitite plz
Do I need to carryout sanding before applying adhesive plz
Nice
I have watched 10 videos and yours was very easy to understand. Thank you a lot.
bhai ye pump kahan milega
Aquarium shop pe milega
Jidhar fish vagera milte udhar
Kitne mm ka glass h isme
5mm thickness
Total west
Jaise jiski soch
Hi can we use epoxy resine for bond ?
Yes you can. But make sure there are no air gaps. To make the structure stronger, you can also use some strong tape after the epoxy adhesive dries.
Sorry for the late reply