Great tutorial bro.. you literally broke it down step by step showing a clear view of each part & you wrote out the name of each part along with specific details on how to put it all back together BEST VIDEO I'VE SEEN explaining this
Dude no kidding. How ridiculous is it that there are 3,387,3728,783 kart and mini bike channels but NOT ONE could I find with instructions for the cable. Thank yoj.
Thanks. I'll add for anyone who missed it - the video actually shows it correctly, but I missed it the first time in the glare on the screen outdoors. He says line up the slot with the idle screw, but the locator pin actually OPPOSITE the idle screw. Scared my kid half to death when I fired up his handmedown 110cc ATV the first time and the throttle was stuck WAO. Thankfully I had it up on blocks just in case.
Trying to get that damn throttle cable attached while holding back the spring, especially since it's a new spring going in, is such a pain in the ass. Without this video I would have given up🤦
I can’t seem to find the length of cable I need withthe right ends. I have a Coleman kt196 go kart I just installed a new carb with this pin setup. The old carb allowed a cable with no barrel end. Is there a way to run a cable through this carb with pin setup with no end on the cable?
When I put my new cable in, the slider doesn't go all the way down to bottom of carb, and it revs high when I start it. Is it the wrong cable, or could it be something else. I've taken carb off 5 times now and it still has same issues, Please help me somebody
@@stillben Yh, it was crazy, the cable i replaced was the exact same size as the one i took off but it was too short to release the carb slider when fitted, so i got a dremmel and took off 10mm from the cable protector at the carb end and now works fine.
@@anonymous2065 That's an idea. Yrah crazy thought it would all be standard. I found the cable guide that bends around was longer on my replacement carb, and was taking too much of the slack, so I am swapping that for my original honda one. My replacement spring seemed too long too so will try original though tired spring. If those don't work, will do your dremel trick. Good shout!
added a new carb on 1990 xr90 new carb had the little clip but no pacman clip......wont start now or if it does it starts wide open...slides in properly....help driving me crazy
Thanks! this video is very helpful full for me, Please whole video! of Suzuki Assess125, 2013 Model How far does that plastic housing for the needle and spring, slide into the carburetor??
I've watched probably all of these NT carb installs and adjustment videos but only recall ONE that mentioned the JET where the person found the jet loose, not even started~!
Don’t you think it would be more useful for viewers to hear your voice instead of that background noise - after all whatever language you speak someone would benefit.
Mere pass Honda CD70 1986 model point sistem Gaari he agar point sistem ko cdi me change karwaon to koi problem Gaari Ni Kare gi or kharcha kitna aaye ga
Thanks for the video ,living where I do I don't have any mechanic near .I did everything like your video shows but the only problem I have is that I bought a new carb and can't get the old carb top off it keeps spinning ,Someone said that it was treaded ,I never changed a part that is treaded can you make a video on that or where you think I can find more info?
Ok so I followed the instructions exactly problem is when choke is on full and accelorate it stalls..and when I reduce the choke my quad revs it’s nuts off and tries to fly off, any ideas
Hopefully you're not still stuck, but for anyone finding this in the future - once you get the slide in correctly, head to the videos on tuning the mixture/idle setting. That was frustrating keeping it running long enough to set the mixture and idle - I had to go a bit overrich first.
Check that gas is coming out of fuel valve, valve has a pick up screen in it that can clog. If fuel is getting to the carb, check that main jet is not clogged. Also check that the float levers are operating and not cutting off the fuel.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Great tutorial bro.. you literally broke it down step by step showing a clear view of each part & you wrote out the name of each part along with specific details on how to put it all back together
BEST VIDEO I'VE SEEN explaining this
Excellent Video. Watched 8 other videos and your the only one that showed the Throttle cable to Carburetor install portion. Thank you very helpful
Dude no kidding. How ridiculous is it that there are 3,387,3728,783 kart and mini bike channels but NOT ONE could I find with instructions for the cable. Thank yoj.
Thank you thank you. Got my son's pit bike up and running 5 minutes after watching this. You got a like and subscribe from me.
Thanks very much.
Watched this once and did my bike, the mark of a perfect instructional video.
Well done !!!
You a legend seven years later
Thank you so much. Straight to the point no waffling on i need to do this to my bike tomorrow I'll be rewatching it then. I've subscribed.
Thanks. I'll add for anyone who missed it - the video actually shows it correctly, but I missed it the first time in the glare on the screen outdoors. He says line up the slot with the idle screw, but the locator pin actually OPPOSITE the idle screw. Scared my kid half to death when I fired up his handmedown 110cc ATV the first time and the throttle was stuck WAO. Thankfully I had it up on blocks just in case.
same i was just shocked and stood there like an idiot while my bike was about to grenade itself
My son just ate shit on his go kart today because I put it together wrong lol
8 years later, Thank You.
Thank you so much. This was really helpful to me. I'm new to this hobby.
What the cap that screws onto carburetor i seen yours has like a nut you twist mine dosent
Non sapevo come si montava il cavo grazie per questo video
Can I just buy or find a pacman clip? It's the only thing I'm missing.
Trying to get that damn throttle cable attached while holding back the spring, especially since it's a new spring going in, is such a pain in the ass. Without this video I would have given up🤦
I can’t seem to find the length of cable I need withthe right ends. I have a Coleman kt196 go kart I just installed a new carb with this pin setup. The old carb allowed a cable with no barrel end. Is there a way to run a cable through this carb with pin setup with no end on the cable?
No, this carb requires the cable with the end on it. We sell a cable kit to make a custom cable any length.
www.pistonbikes.com/product-p/epfc14in.htm
I got to save all the background music I've ever heard on these kind of videos this is my favorite one is the only one that don't bug me.
Right on bro thanks for the help man you gave me the confidence I needed to do that dude I really appreciate that good video
Instablaster
LOL I came here because I messed with that thing and then couldn't put it back together, had no clue how to do it, now I know how, thanks!!
Quick and easy! Thank you so much!
Very very thank you today this video is very helpful full for me, I reached my place with the help of last minute of this video
Thanks again
Great video. Please make more of these maintenance videos. I have a 78 Honda c50. This was helpful
The
@@VivekYadav-gc8pu The? Lol
Thank you for making this video, I just fixed my sons pit bike
When I put my new cable in, the slider doesn't go all the way down to bottom of carb, and it revs high when I start it.
Is it the wrong cable, or could it be something else.
I've taken carb off 5 times now and it still has same issues,
Please help me somebody
i am having similar problem. my cable is too tight with the new needle in place. barely turns on the throttle grip.
@@stillben
Yh, it was crazy, the cable i replaced was the exact same size as the one i took off but it was too short to release the carb slider when fitted, so i got a dremmel and took off 10mm from the cable protector at the carb end and now works fine.
@@anonymous2065 That's an idea. Yrah crazy thought it would all be standard. I found the cable guide that bends around was longer on my replacement carb, and was taking too much of the slack, so I am swapping that for my original honda one. My replacement spring seemed too long too so will try original though tired spring. If those don't work, will do your dremel trick. Good shout!
Anung brand ng carburador yan boss
Mine is new, I'm assembling it for the first time and the round slide is stuck. How do I get it out?
Moi c'est Sanogo Abdoulaye je suis mécanismes de moto An côté voir et je vous félicite pour l'amour de votre métier
Needing help, I did everything in the video but the Throttle never slings back, it just says
should I really take the carburetor off my bike to put the cable?
added a new carb on 1990 xr90 new carb had the little clip but no pacman clip......wont start now or if it does it starts wide open...slides in properly....help driving me crazy
Thanks 🙏
Thank you!! Love the video
You covered up the part I waited for the whole video! Haha. How far does that plastic housing for the needle slide into the carburetor??
Keith Lutz all the way
“”8”6 y you hgand up l who’d
Y@@tyronehunt5836 yyyy
Took my old carb. Apart can’t get the old one out need some ideas
Thanks! this video is very helpful full for me, Please whole video! of Suzuki Assess125, 2013 Model How far does that plastic housing for the needle and spring, slide into the carburetor??
1:38 Thanxs ❤
Where could I find a Pacman clip at?
I've watched probably all of these NT carb installs and adjustment videos but only recall ONE that mentioned the JET where the person found the jet loose, not even started~!
Heck yea! Thank you!
thanks
Mi bicimoto no tiene fuerza que puede ser
Your a bloody legend mate
Thanks mate back on the track.
Thank you.
Don’t you think it would be more useful for viewers to hear your voice instead of that background noise - after all whatever language you speak someone would benefit.
i can not find the cable set anywhere, any ideas
Why is the spring important please help me
Sam Dib - the spring is important so the throttle will snap back. Without it the carb would get stuck in the open position
Robert Whetzel funny enough I need a new spring for mine. It barely moves the throttle at all
Mere pass Honda CD70 1986 model point sistem Gaari he agar point sistem ko cdi me change karwaon to koi problem Gaari Ni Kare gi or kharcha kitna aaye ga
Soo what if the parts inside at firsy are stuck
Great video on this carburetor I fix my problem
Thank you
Quiero saber en forma va la aguja en que posición tiene una ranura larga y otra corta como se coloca
Awesome
Yamaha ytx how to install starter cable step by step
Super helpful vid
Thanks for the video ,living where I do I don't have any mechanic near .I did everything like your video shows but the only problem I have is that I bought a new carb and can't get the old carb top off it keeps spinning ,Someone said that it was treaded ,I never changed a part that is treaded can you make a video on that or where you think I can find more info?
OLMEC THUGS there might be a little set screw in the side you have to loosen
Threaded, simply means you screw the cap off. And as previously stated, it may have a set scew that you have to loosen.
Jimmy Whitlow thank you the bike is gone , I sold it
Thanks so much - would have had it in upside down if it wasn’t for this vid!
Thanks a lot this video was perfect for what I needed to fix, thanks
L
thank you so much sir aap ki wajah se Meri bahut jyada madat Hogi thank you thank you thank you so much
It helps me a lot boss. Thank you
Thanks! This is exactly what I was looking for !
same
Good on ya bro, great vid!
salamat paps ito talaga hanap ko. malaking tulong to salamat ulit
Good video. 😂 music had me ready to go!!
I put the new one in but not the new spring ji still not getting any throttle
ya kon se bike ka carburetor ha
I can’t take mine out I think it’s stuck or something idk
Slide might be dragging on the guide pin. Or might have been installed with the pin not in the groove
Ok so I followed the instructions exactly problem is when choke is on full and accelorate it stalls..and when I reduce the choke my quad revs it’s nuts off and tries to fly off, any ideas
ALEX R having the same problem with my sons go-cart, hope you got it fixed bc I can’t get this thing running smooth to save my life!!!
Hopefully you're not still stuck, but for anyone finding this in the future - once you get the slide in correctly, head to the videos on tuning the mixture/idle setting. That was frustrating keeping it running long enough to set the mixture and idle - I had to go a bit overrich first.
We're can I get on I have a 110cc and need a new cable and can't find it we're can get the nt carb throttle cable your showing gonna the video
PistonBikes.com. Look for throttle cable
Ab ki br video ko camera ko pore samnay rakh kr bana na
This helps a lot. Thanks much.
Perfect video man
Hero
thanks for this helped a lot
Thanks - really helpful
Still waiting for Hitman.
Gas to the carburetors is not getting gas,And won't start, how come??
Check that gas is coming out of fuel valve, valve has a pick up screen in it that can clog. If fuel is getting to the carb, check that main jet is not clogged. Also check that the float levers are operating and not cutting off the fuel.
XxGamergirlxX ! Full o
Please send this video to bike berry.comp because their coustermer service has no idea
Mare activa gadi chalet fact speed cam jade ho raha hai
Very very good
thanyou very helpful
super👌👌👌💚💛💜
Awesome video..thanks man
कीमत तार की रेस के
Very nice 👍👍 👍
Can anyone pls give me a carburetor cap mine broke
Alfonso Macias i can
Thanks bro
Merci
Good
OK thank you
Awesome
Cheers buddy 👍
Video banane ke liye thanks
Great video, crap music
Please, no music or discuss what you are doing as you do it.
Tnx bro ❤❤
Good i will try
Thanks. (painful music though)
Sorry about the music, it was the only royalty free I could find at the time. I’ll look into changing it.
Haha. Great video though.
Thanks man
karbu fit x
Hi
Super
Nice channel,,m mkinik umar ch
Thanks bhai video
Music kill the video but thanks
I will make a how to video on adjusting your device's volume. Then you can turn it down and not be bothered.